Update windows server 2008 r2 to service pack1
how we can update the windows server 2008 r2 to windows server 2008 r2 service pack 1
with consideration that I already have active directory in this server
i don't find any documentation for updating windows server 2008 R2 to windows server 2008 r2 service pack 1
Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
Since your post is off-topic, I am moving it to the
off topic forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})
Similar Messages
-
Does Safari run in Windows Server 2008 R2 (Terminal Services)?
does Safari run in Windows Server 2008 R2 (Terminal Services)?
Hi Jess,
Here are two things I suggest you check:
The Monitoring interval is set to 900 minutes, would the profile size get reduced after 15 hours and run
gpupdate/force?
Since the Sessenv.dll version is higher than the ones described in KB 2575946, the issue is supposed to be fixed. I suggest you run System File Checker to scan all protected system files.
In addition, you can also collect Gpsvc.log to determine if policies are applied successfully.
More information for you:
System File Checker (sfc)
http://technet.microsoft.com/en-us/library/bb491008.aspx
Group Policy not being applied
http://social.technet.microsoft.com/Forums/windowsserver/en-US/9884d06d-b5f8-44c9-a703-7b5211f1e0ba/group-policy-not-being-applied?forum=winserverGP
Best Regards,
Amy -
Windows Server 2008 R2 DNS service issue with BitLocker
I recently installed BitLocker on a Windows Server 2008 Platform. I did not encrypt the boot partition because the server hardware BIOS did not have the necessary requirements to encrypt the system drive.
The Server roles are ADSM, DC and File Server. For DC operation I am also running the DNS service.
When I installed the DNS role I was prompted to install the Log files on a different volume than the OS. I did this, but unfortunately, it was the same volume that was encrypted.
Since I could not encrypt the system disk, the encrypted volume must be unlocked via password in order to mount. Here in lise my problem.
When I do a full reboot of the server, I get to the point in the boot process where my mouse is visible and operational (this would be just before the Windows OS logo displays, I believe), then the server reboots. On the next boot up I am given the diagonstics
and recovery dialog because the OS failed to boot.
I believe the failure is the DNS service trying to launch, but because the log files are on the encrypted drive and it has not been unlocked, the system sees this as a security problem and reboots
Does this make sense? If it does, is there a way to boot 2008 R2 with the DNS service disabled, say with the original install disk in recovery mode?
Any help would be greatly appreciated as this system cannot be booted in its current state.
Peter C. Hesse Network/Systems AdministratorHi,
I believe you mean the Active Directory Logs not the DNS logs, because these are necessary to startup a domain controller, because the AD database depends on these logs.
So if you have AD logs on a different partition and that is encrypted with Bitlocker you could probably automatically unlock it.
So you did not encrypt OS partition because the server does not have a TPM fully compliant chip ?
manage-bde /?
manage-bde -autounlock -enable Driveletter:
But you have to be able to boot server normal mode I am not sure if the command can be used in DSRM mode.
Below are some links that might help:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/c52ffc7d-f822-4b61-b633-46f8e04eac80/bitlocker-for-domain-controller
Hope this helps.
Regards,
Calin -
Unable to install Forfront TMG 2010 on Server 2008 R2 with Service Pack1
Hi I am Installing TMG 2010 on Server 2008R2 with service pack 1 ... then I am getting the error as below snapshot...kindly help me out
and I 've check event log then please find below snapshot :Hi,
It seems that you have created an similar thread below:
Unable to install Forfront TMG 2010 on Server 2008 R2 with SP1
Since you have installed Service Pack 1 for Windows Server 2008 R2, please refer to the KB below:
Event ID 10 is logged in the Application log after you install Service Pack 1 for Windows 7 or Windows Server 2008 R2
If the solutions in the thread above are not helpful, please feel free to contact us.
Best regards,
Susie -
Windows Server 2008 R2 - Fax service fails daily.
Hi,
We are experiencing a daily crash of the fax service on Windows Server 2008 R2.
We have installed the hotfix as mentioned here: http://support.microsoft.com/kb/973640 but still getting daily crashes.
Someone mentioned here that Microsoft wrote a code injection application that fixed it but I can't find that anywhere.
Any help appreciated.
Thanks
Event 1000
Faulting application name: fxssvc.exe, version: 6.1.7600.20788, time stamp: 0x4c75f01a
Faulting module name: cdosys.dll_unloaded, version: 0.0.0.0, time stamp: 0x4a5bde95
Exception code: 0xc000041d
Fault offset: 0x000007fedb5fd258
Faulting process id: 0x3124
Faulting application start time: 0x01cbee176ffb3077
Faulting application path: C:\Windows\system32\fxssvc.exe
Faulting module path: cdosys.dll
Report Id: fff4e925-5a0c-11e0-821f-002564fcea0f
Event 1001
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: fxssvc.exe
P2: 6.1.7600.20788
P3: 4c75f01a
P4: cdosys.dll_unloaded
P5: 0.0.0.0
P6: 4a5bde95
P7: c000041d
P8: 000007fedb5fd258
P9:
P10:
Attached files:
C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\WERBAD4.tmp.appcompat.txt
C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\WERBAF4.tmp.WERInternalMetadata.xml
C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\WERBB05.tmp.hdmp
C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\WERBC1F.tmp.mdmp
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_fxssvc.exe_89b8f5e86df31f4ed956a0a2c86825db0c72af9_cab_56f4bd34
Analysis symbol:
Rechecking for solution: 0
Report Id: fff4e925-5a0c-11e0-821f-002564fcea0f
Report Status: 4Hi,
Thanks for the post.
We may have to analyze memory dump file to narrow down the cause of this issue, forum is not the best place for analyzing dump. It’s suggested to contact Microsoft Customer Support Services (CSS) so that a dedicated Support Professional can help you
on this issue.
To obtain the phone numbers for specific technology request please take a look at the web site listed below.
http://support.microsoft.com/default.aspx?scid=fh;EN-US;PHONENUMBERS
If you are outside the US please see http://support.microsoft.com for regional support phone numbers.
Thanks,
Miles
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Windows Server 2008 r2 File service and Storage File opened by "another user"
When I was using Windows server 2003 it show files opened by "user's name" but after changing to windows server 2008 r2 it only shows File opened by "another user" this is a hug problem in our organization which has around 200 staff's
sharing files, and dont know who has opened file,
We administrator can see and close opened file from "Manage opened files" but we want users also to see who has opened current file they are using instead of showing opened by another user displaying the user's name of the file opened.
Can anyone help me with this problem,
Thank you in Advance,Hi,
I tried on a Windows 2008 R2 system and here is the result.
Here "2" is a standard domain user so it could be displayed correctly.
I would like to know if the issue specifically occurs on Office files? If so it could be an Office issue instead of system related. You can try one of the following 2 files:
Excel 2007 - http://support.microsoft.com/kb/2598133
Excel 2010 - http://support.microsoft.com/kb/2598143
If you have any feedback on our support, please send to [email protected] -
ERROR CODE 8024404 WHILE UPDATING WINDOWS SERVER 2008 ENTERPRISES EDITION SP1
Hi ,
i am getting error while updating windows updates i have tried disable Escan anti virus i tried again to update windows but same error showingHi,
Based on current situation, please run this Fix tool. Then check if this issue still persists.
Fix the problem with Microsoft Windows Update that
is not working
If still exists, please refer to the following KB and reset Windows Update components. Then monitor the result.
How do I reset Windows Update components?
Meanwhile, you can also use the System Update Readiness tool and then reinstall the update again. For more
details, please refer to this KB.
In addition, regarding to going further analysis, we can check the WindowsUpdate.log file. It may provide more
details. For detailed operations, please refer to the following KB.
How to read the Windowsupdate.log file
Hope this helps.
Best regards,
Justin Gu -
Windows Server 2008 64-bit Service Java Crash
Using the same process that has worked well for creating Windows services for my admin and managed servers on 32-bit I created them on a 64-bit machine using beasvcx64 and JAVA_VM=-server. The server generates a fatal Java exception when starting:
<Sep 19, 2011 12:16:43 PM EDT> <Warning> <oracle.as.jmx.framework.MessageLocalizationHelper> <J2EE JMX-46041> <The resource for bundle "oracle.jrf.i18n.MBeanMessageBundle" with key "oracle.jrf.JRFServ
iceMBean.checkIfJRFAppliedOnMutipleTargets" cannot be found.>
# A fatal error has been detected by the Java Runtime Environment:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x000000006d92f7a6, pid=6280, tid=7084
# JRE version: 6.0_27-b07
# Java VM: Java HotSpot(TM) 64-Bit Server VM (20.2-b06 mixed mode windows-amd64 compressed oops)
# Problematic frame:
# V [jvm.dll+0x9f7a6]
# An error report file with more information is saved as:
# d:\OBIEE\user_projects\domains\bi11g_etl_domain\hs_err_pid6280.log
Does anybody have these servers running as Windows services on 2008? Were there any special steps you took?You nailed that Christian.
In my services both the admin and managed server were being started with the memory argument: -Xms32m -Xmx200m -XX:MaxPermSize=128m
I think this is the default.
I changed it to the parameters used in the startup scripts and it worked the first time.
bi_server1
JAVA Memory arguments: -Xms256m -Xmx2048m -XX:MaxPermSize=512m
AdminServer
JAVA Memory arguments: -Xms256m -Xmx1024m -XX:MaxPermSize=512m -XX:-UseSSE42Intrinsics
Thanks. -
Windows server 2008 R2 Enterprise Service Pack 1 - TCP/IP Registry settings
I am facing the issue while making TCP/IP connections. This issue is occuring sometimes and not usual.
No connection could be made because the target machine actively refused it 127.0.0.1:8056.
This issue is due to server has full backlog.
Questions - Where to check the server backlog for TCP/IP requests?
How to tune the TCP/IP requests? Do we need to add any registry settings? Impact of those settings?
Any help is really appreciated.These ones may help.
http://blogs.msdn.com/b/sql_protocols/archive/2006/03/09/546852.aspx
http://support.microsoft.com/kb/328476
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
Can not update on windows server 2008 R2
Hi All
I have been trying to update windows server 2008 R2 after doing a fresh install. i have used HP smart Start to do the install.
I have a HP ML 350 G5 Server
this is the 3rd time i have tried to install . first time i used smart start and
selected custom install and all the required drivers and updates downloaded from hp fine. i can connect to the internet fine but when i click windows update it starts checking for updates finds something some thing which i think is the update manager. then blanks out
the down load screen and then it comes back on with windows could not search for new update error code 80072F8F. the second i just went with a streight install with out smart and got the same results then with smart start but express install. again with the
same results.
under update history i have windows update agent 7.6.7600.256 successful important 5/2/2011
any help would be very greatfull
Many thanks
Richard CHere are some possibilities:
Are the date and time correct? (See Windows Update error 80072f8f)
Temporary connection-related errors may occur when you use Windows Update or Microsoft Update
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights -
Windows Server 2008 R2 SP1 - BSOD Stop Error 0x00000050 RDPWD.SYS
Hi all,
I have been struggling with a BSOD for the past 5 weeks and have scoured the web trying in vain to find someone else with the same issue.
Environment:
8 x 2008 R2 SP1 Windows Servers (8Gb RAM, 25Gb HDD) with Remote Desktop Services Roles installed, running as part of an RDS Farm. All Servers are VM Guests (hardware version 7) running on VMware vSphere v4.1.0-260247 Hosts (Dell
PowerEdge R710 - 128Gb RAM). Our vSphere 'farm' has 5 Hosts that connect to our EMC SAN via iSCSI with multipath routes.
Each RDS Server is load balanced via a Connection Broker, and each server has the same set of software / vm hardware installed. In a nutshell, each has Symantec Endpoint Protection v11.0.5002.333, Symantec Altiris v7.0, Microsoft Office 2007 as well as
other various software essential to these servers.
Symptoms:
Randomly throughout the day, one (or more) of the RDS Servers will crash with a BSOD more often than not with "caused by driver ntoskrnl.exe" sometimes with "cng.sys" and once with "ksecpkg.sys". So far in the 5 weeks I have had 90 crashes. Yesterday
all 8 of the RDS Servers crashed at some point throughout the day.
On a typical BSOD, it says:
The problem seems to be caused by the following file: ntoskrnl.exe
PAGE_FAULT_IN_NONPAGED_AREA
Technical Information:
*** STOP: 0x00000050 (0xfffffa800c153284, 0x0000000000000001, 0xfffff880053dc0c9, 0x0000000000000000)
*** ntoskrnl.exe - Address 0xfffff8000169ac40 base at 0xfffff8000161e000 DateStamp 0x4e02aaa3
Using BlueScreenView it says "caused by address: ntoskrnl.exe+7cc40" nearly every time.
I have analysed as best I could using Microsoft WinDbg, and this is the output of a typical mini-dump file:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [\\hqrds01\c$\Windows\Minidump\030112-19359-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*C:\Program Files\Debugging Tools for Windows (x64)\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Product: Server, suite: TerminalServer
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`01609000 PsLoadedModuleList = 0xfffff800`0184e670
Debug session time: Thu Mar 1 09:14:00.921 2012 (UTC + 0:00)
System Uptime: 0 days 21:31:41.950
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis
Use !analyze -v to get detailed debugging information.
BugCheck 50, {fffffa800be83284, 1, fffff8800576f0c9, 0}
Could not read faulting driver name
Probably caused by : RDPWD.SYS ( RDPWD!memcpy+1d9 )
Followup: MachineOwner
1: kd> !analyze -v
* Bugcheck Analysis
PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffffa800be83284, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffff8800576f0c9, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000000, (reserved)
Debugging Details:
Could not read faulting driver name
WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff800018b8100
fffffa800be83284
FAULTING_IP:
RDPWD!memcpy+1d9
fffff880`0576f0c9 668901 mov word ptr [rcx],ax
MM_INTERNAL_CODE: 0
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
BUGCHECK_STR: 0x50
PROCESS_NAME: svchost.exe
CURRENT_IRQL: 0
TRAP_FRAME: fffff8800bf70a80 -- (.trap 0xfffff8800bf70a80)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=000000000000023d rbx=0000000000000000 rcx=fffffa800be83284
rdx=ffffffffffe7e63b rsi=0000000000000000 rdi=0000000000000000
rip=fffff8800576f0c9 rsp=fffff8800bf70c18 rbp=0000000000000001
r8=000000000000001c r9=fffff8a0033401e8 r10=fffff8a0033401e8
r11=fffffa800be83268 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl nz na pe nc
RDPWD!memcpy+0x1d9:
fffff880`0576f0c9 668901 mov word ptr [rcx],ax ds:0c40:fffffa80`0be83284=????
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff800016319fc to fffff80001685c40
STACK_TEXT:
fffff880`0bf70918 fffff800`016319fc : 00000000`00000050 fffffa80`0be83284 00000000`00000001 fffff880`0bf70a80 : nt!KeBugCheckEx
fffff880`0bf70920 fffff800`01683d6e : 00000000`00000001 fffffa80`0be83284 00000000`00000000 fffff8a0`0be85820 : nt! ?? ::FNODOBFM::`string'+0x4611f
fffff880`0bf70a80 fffff880`0576f0c9 : fffff880`057547cf 00000000`00000000 00000000`00000022 00000000`00000002 : nt!KiPageFault+0x16e
fffff880`0bf70c18 fffff880`057547cf : 00000000`00000000 00000000`00000022 00000000`00000002 fffff880`0576c99d : RDPWD!memcpy+0x1d9
fffff880`0bf70c20 fffff880`0576c9fc : fffff8a0`0f938010 00000000`00000022 00000000`00000019 00000000`00000002 : RDPWD!SM_MCSSendDataCallback+0x303
fffff880`0bf70c60 fffff880`0576b354 : fffff880`0bf70da0 fffff8a0`033401e8 00000000`00000000 fffff880`0576abfd : RDPWD!HandleAllSendDataPDUs+0x188
fffff880`0bf70d10 fffff880`0576af64 : 00000000`00000031 fffffa80`0bd01895 00000006`0000001f fffff880`05739079 : RDPWD!RecognizeMCSFrame+0x28
fffff880`0bf70d50 fffff880`029ba1f8 : fffff8a0`03345000 fffffa80`0bae6e80 fffffa80`0a5c0e60 fffff880`05737e00 : RDPWD!MCSIcaRawInputWorker+0x3d4
fffff880`0bf70df0 fffff880`057378d0 : 00000000`00000000 fffff880`0bf70f10 fffff880`0bf70f08 00000000`00000000 : termdd!IcaRawInput+0x50
fffff880`0bf70e20 fffff880`05736d85 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : tssecsrv!CRawInputDM::PassDataToServer+0x2c
fffff880`0bf70e50 fffff880`057367c2 : fffffa80`088e8a28 fffffa80`00000000 00000000`00000031 fffff800`00000000 : tssecsrv!CFilter::FilterIncomingData+0xc9
fffff880`0bf70ef0 fffff880`029ba1f8 : fffff880`009b8180 00000000`00000001 00000000`00000000 00000000`00000000 : tssecsrv!ScrRawInput+0x82
fffff880`0bf70f60 fffff880`0572c4c5 : fffffa80`088e8a10 fffffa80`0bd01658 00000000`00000000 fffffa80`088e8a10 : termdd!IcaRawInput+0x50
fffff880`0bf70f90 fffff880`029baf3e : fffffa80`0bd01620 fffffa80`0c100420 fffffa80`0bd4b450 fffffa80`0973b9b0 : tdtcp!TdInputThread+0x465
fffff880`0bf71810 fffff880`029b9ae3 : fffffa80`09d902b0 fffffa80`0973b9b0 fffffa80`093d8520 fffffa80`0bd4b450 : termdd!IcaDriverThread+0x5a
fffff880`0bf71840 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : termdd!IcaDeviceControlStack+0x827
STACK_COMMAND: kb
FOLLOWUP_IP:
RDPWD!memcpy+1d9
fffff880`0576f0c9 668901 mov word ptr [rcx],ax
SYMBOL_STACK_INDEX: 3
SYMBOL_NAME: RDPWD!memcpy+1d9
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: RDPWD
IMAGE_NAME: RDPWD.SYS
DEBUG_FLR_IMAGE_TIMESTAMP: 4ce7ab45
FAILURE_BUCKET_ID: X64_0x50_VRF_RDPWD!memcpy+1d9
BUCKET_ID: X64_0x50_VRF_RDPWD!memcpy+1d9
Followup: MachineOwner
The RDS servers are set to reboot automatically, and after a period of 5 minutes or so, the users can reconnect and log back in. On a typical day each server will have around 10 people RDP'd in to them.
The Users connecting to the RDS Servers included XP laptops/desktops and IGEL UD-120-LX Thin Terminals. The XPs have SP3 installed and are fully patched via Symantec Altiris.
Things I have tried:
- Analyse the dump-files (as per above).
- I have tracked each user logging on to the RDS Farm (via batch scripts) and tried to determine if this is caused by the same individual(s) but it appears random.
- Check to see if the crashing Virtual Machine is running on a specific host, but it has happened on all Hosts.
- Check to see if there was anything specific that happened on the day that the crashes started. There were about 5 new poeple introduced to the RDS Farm at that time, but there were using (a) client machines that had been used previously elsewhere with
no issues, (b) software that had been used previously, (c) in a remote location that had previous users using RDS, (d) have not been logged on to a RDS Server when it has crashed.
- Updated Windows Server 2008 R2 SP1 to the latest patches (as of Feb 2012).
- Turned on Verifier (using recommended settings), and then analysed dump-files with the same reference to rdpwd.sys.
- Fixed the Memory Resource Reservation in vSphere to the full 8Gb for all these RDS Servers (so that the memory is not shared at all).
- Ran MEMTEST on a VM Guest with the full 8Gb RAM, on a couple of the ESX Hosts.
- Changed the VMTools Video Driver to the SVGA II driver from the Standard VGA Driver.
- Ran a full AV Scan (using SEP).
- Isolated the Printer Drivers using the Printer Management MMC.
- Ran sfc /scannow of all RDS Servers and rebooted.
The mini-dump file mentioned above is here:https://skydrive.live.com/redir.aspx?cid=48f471f287af2349&resid=48F471F287AF2349!105&parid=48F471F287AF2349!103
I hope someone can help, as what hair I have left (from pulling it out) is turning grey!
Andy* Bugcheck Analysis
PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffffa800c153284, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffff880053dc0c9, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000000, (reserved)
Debugging Details:
Could not read faulting driver name
WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff800018cd100
fffffa800c153284
FAULTING_IP:
RDPWD!memcpy+1d9
fffff880`053dc0c9 668901 mov word ptr [rcx],ax
MM_INTERNAL_CODE: 0
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
BUGCHECK_STR: 0x50
PROCESS_NAME: svchost.exe
CURRENT_IRQL: 0
TRAP_FRAME: fffff8800aa48a80 -- (.trap 0xfffff8800aa48a80)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=00000000000001ff rbx=0000000000000000 rcx=fffffa800c153284
rdx=ffffffffffee6b8b rsi=0000000000000000 rdi=0000000000000000
rip=fffff880053dc0c9 rsp=fffff8800aa48c18 rbp=0000000000000001
r8=000000000000001c r9=fffff8a0123923a8 r10=fffff8a0123923a8
r11=fffffa800c153268 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl nz na pe nc
RDPWD!memcpy+0x1d9:
fffff880`053dc0c9 668901 mov word ptr [rcx],ax ds:8c40:fffffa80`0c153284=????
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff800016469fc to fffff8000169ac40
STACK_TEXT:
fffff880`0aa48918 fffff800`016469fc : 00000000`00000050 fffffa80`0c153284 00000000`00000001 fffff880`0aa48a80 : nt!KeBugCheckEx
fffff880`0aa48920 fffff800`01698d6e : 00000000`00000001 fffffa80`0c153284 00000000`00000000 fffff8a0`10919830 : nt! ?? ::FNODOBFM::`string'+0x4611f
fffff880`0aa48a80 fffff880`053dc0c9 : fffff880`053c17cf 00000000`00000000 00000000`00000022 00000000`00000002 : nt!KiPageFault+0x16e
fffff880`0aa48c18 fffff880`053c17cf : 00000000`00000000 00000000`00000022 00000000`00000002 fffff880`053d999d : RDPWD!memcpy+0x1d9
fffff880`0aa48c20 fffff880`053d99fc : fffff8a0`10cf30d0 00000000`00000022 00000000`00000019 00000000`00000002 : RDPWD!SM_MCSSendDataCallback+0x303
fffff880`0aa48c60 fffff880`053d8354 : fffff880`0aa48da0 fffff8a0`123923a8 00000000`00000000 fffff880`053d7bfd : RDPWD!HandleAllSendDataPDUs+0x188
fffff880`0aa48d10 fffff880`053d7f64 : 00000000`00000031 fffffa80`0c039de5 00000006`0000001f fffff880`053a6079 : RDPWD!RecognizeMCSFrame+0x28
fffff880`0aa48d50 fffff880`012c01f8 : fffff8a0`12393000 fffffa80`0bb7aa60 fffffa80`0b81e9c0 fffff880`053a4e00 : RDPWD!MCSIcaRawInputWorker+0x3d4
fffff880`0aa48df0 fffff880`053a48d0 : 00000000`00000000 fffff880`0aa48f10 fffff880`0aa48f08 fffffa80`0c039ba8 : termdd!IcaRawInput+0x50
fffff880`0aa48e20 fffff880`053a3d85 : fffff880`01716890 fffffa80`0c0327e8 00000000`00000000 00000000`00000000 : tssecsrv!CRawInputDM::PassDataToServer+0x2c
fffff880`0aa48e50 fffff880`053a37c2 : fffffa80`0c16e598 fffffa80`00000000 00000000`00000031 fffff800`00000000 : tssecsrv!CFilter::FilterIncomingData+0xc9
fffff880`0aa48ef0 fffff880`012c01f8 : fffff880`009b8180 00000000`00000001 00000000`00000000 00000000`00000000 : tssecsrv!ScrRawInput+0x82
fffff880`0aa48f60 fffff880`052994c5 : fffffa80`0c16e580 fffffa80`0c039ba8 00000000`00000000 fffffa80`0c16e580 : termdd!IcaRawInput+0x50
fffff880`0aa48f90 fffff880`012c0f3e : fffffa80`0c039b70 fffffa80`0acccf20 fffffa80`0a95c450 fffffa80`0abf9620 : tdtcp!TdInputThread+0x465
fffff880`0aa49810 fffff880`012bfae3 : fffffa80`0c0a6560 fffffa80`0abf9620 fffffa80`087eee80 fffffa80`0a95c450 : termdd!IcaDriverThread+0x5a
fffff880`0aa49840 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : termdd!IcaDeviceControlStack+0x827
STACK_COMMAND: kb
FOLLOWUP_IP:
RDPWD!memcpy+1d9
fffff880`053dc0c9 668901 mov word ptr [rcx],ax
SYMBOL_STACK_INDEX: 3
SYMBOL_NAME: RDPWD!memcpy+1d9
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: RDPWD
IMAGE_NAME: RDPWD.SYS
DEBUG_FLR_IMAGE_TIMESTAMP: 4ce7ab45
FAILURE_BUCKET_ID: X64_0x50_VRF_RDPWD!memcpy+1d9
BUCKET_ID: X64_0x50_VRF_RDPWD!memcpy+1d9
Followup: MachineOwner
Bug Check Code 0x50:http://msdn.microsoft.com/en-us/library/windows/hardware/ff559023%28v=vs.85%29.aspx
Please start by that:
Update all possible drivers
Uninstall all unused programs
Disable all security softwares you have
Run chkdsk /r /f and sfc /scannow
Run memtest86+ to check if all is okay with your RAM. If an error was detected then replace the faulty RAM or contact your manufacturer Technical Support
If this does not help then upload MEMORY.DMP file (You can zip it and divide it using 7-ZIP) using Microsoft Skydrive and post a link here.
You can also contact Microsoft CSS for assistance.
This
posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Microsoft
Student Partner 2010 / 2011
Microsoft
Certified Professional
Microsoft
Certified Systems Administrator: Security
Microsoft
Certified Systems Engineer: Security
Microsoft
Certified Technology Specialist: Windows Server 2008 Active Directory, Configuration
Microsoft
Certified Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration
Microsoft
Certified Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration
Microsoft
Certified Technology Specialist: Windows 7, Configuring
Microsoft
Certified Technology Specialist: Designing and Providing Volume Licensing Solutions to Large Organizations
Microsoft
Certified IT Professional: Enterprise Administrator
Microsoft Certified IT Professional: Server Administrator
Microsoft Certified Trainer -
Cannnot use 3TB hard drive to install Windows Server 2008 R2
I am trying to install Windows 2008 R2 on a server with a 3TB HDD, but I can only create a 2TB partition on the hard drive, leaving around 800GB which I cannot even access. I can install Windows on the 2TB partition, but even after installation, I cannot
physically access the remaining 800GB. When I right click on the 800GB unallocated partition in Storage\Disk Manager, I have no options to create a new partition. If I right-click on the existing 2TB partition, I have no option to extend it using the remaining
800GB.
Motherboard details:
Asus Veriton S460
Product Name: EG31M
System BIOS: R01-C2
BIOS Release Date: 11/27/08
Can I do anything to use the remaining 800GB?
Thanks.Link
Known Issues/Limitations
Because the transition to a single-disk capacity of greater than 2 TB has occurred fairly recently, Microsoft has investigated how
Windows supports these large disks. The results reveal several issues that apply to all versions of Windows earlier than and including Windows 7 with Service Pack 1 and Windows Server 2008 R2 with Service Pack 1.
To this point, the following incorrect behavior is known to occur when Windows handles single-disk storage capacity of greater than 2 TB:
The numeric capacity beyond 2 TB overflows. This results in the system being able to address only the capacity beyond 2 TB. For example, on a 3 TB disk, the available capacity may be only 1 TB.
The numeric capacity beyond 2 TB is truncated. This results in no more than 2 TB of addressable space. For example, on a 3 TB disk, the available capacity may be only 2 TB.
The storage device is not detected correctly. In this case, it is not displayed in either the Device Manager or Disk Management windows.
Many storage controller manufacturers offer updated drivers that provide support for storage capacities of more than 2 TB. Contact your
storage controller manufacturer or OEM to determine what downloadable support is available for single-disk capacities that are greater than 2 TB. -
Windows Server 2008 R2 problem
Hi there
I'm a newbie to Flash media server and I would like to explore its usage.
Does any one have experience with Flash Media Server 3.5.3 running on Windows Server 2008 R2? I installed FMS on my Windows Server 2008 R2, but the admin console cannot start.
By the way, I installed FMS on a Windows Server 2003 32-bit machine. And I'm able to use the admin console on Server 2003 to connect to the Server 2008 R2 installation.
Also, I have a separate disk that is used to hold the media content to be streamed via FMS. How can I configure FMS to use that disk as root for media file instead of using "c:\program files (x86)\...\webroot\vod"
Thanks very much in helping me to start the project.
Best Regards
Steve YauForThanks very much for your prompt response.
For (1), if I start "Flash Media Administration Console" from the Start menu, an IE prompts up and it tries to open "c:\program files(x86)\Adobe\Flash Media Server 3.5\tools\fms_adminConsole.htm" with the following in the information bar:
"An add-on for this website failed to run. Check the security settings in Internet Options for potential conflicts"
I thought it was the problem of flash player that cannot be run on 64-bit IE, so i tried 32-bit IE, but still in vain. I also tried to install flash player using 32-bit IE on Windows server 2008 R2 but the installation cannot start.
The FMSAdmin service is surely running with firewall configured. I've also installed FMS on another Windows Server 2003 32-bit. There I can start the admin console and connect to the Windows Server 2008 R2 FMSAdmin service.
For (2), I've added the line as per your kind help. But my question will be: How can I test whether my FMS is correctly streaming the video? For Windows Media Service, I can easily open URL in WMP and the streaming can be verified easily. But I don't know how to test FMS setup from web client side. Any clues? For your information, I don't have Adobe Flash or Dreamweaver stuff.
Thanks again for your kind help
Regards
Steve Yau -
Windows update KB2964444 broke Event Logging Service and SQL Agent Service on Windows Server 2008 R2
I got the following problem:
I discovered that on my Windows Server 2008R2 machine the event logging stopped working on 04/May/2014 at 03:15.
Also, SQL Agent Service won't run
The only change that day was security
update KB2964444 - Security
Update for Internet Explorer 11 for Windows Server 2008 R2for x64-based Systems, that was installed exactly 04/May/2014 at 03:00. Apparently, that's what broke my machine...
When I try to start Windows Event Log via net
start eventlog or via Services
panel, I get an error:
C:\Users\Administrator>net start eventlog
The Windows Event Log service is starting.
The Windows Event Log service could not be started.
A system error has occurred.
System error 2 has occurred.
The system cannot find the file specified.
I tried:
restarted the OS (virtual on the host's VMWare).
re-checked the settings in services menu -they are like in the link.
checked the identity in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\eventlog -
the identity is NT
AUTHORITY\LocalService
gave all Authenticated Users full access to C:\Windows\System32\winevt\Logs
ran fc /scannow - Windows Resource Protection did not find any integrity violations.
went to the file %windir%\logs\cbs\cbs.log -
all clean, [SR] Repairing 0 components
EDIT: Uninstalled the recent system updates and rebooted - didn't help
EDIT: Sysinternals Process Monitor results when running start service from services panel (procmon in elevated mode):
filters:
process name is svchost.exe : include
operation contains TCP : exclude
the events captured are:
21:50:33.8105780 svchost.exe 772 Thread Create SUCCESS Thread ID: 6088
21:50:33.8108848 svchost.exe 772 RegOpenKey HKLM SUCCESS Desired Access: Maximum Allowed, Granted Access: Read
21:50:33.8109134 svchost.exe 772 RegQueryKey HKLM SUCCESS Query: HandleTags, HandleTags: 0x0
21:50:33.8109302 svchost.exe 772 RegOpenKey HKLM\System\CurrentControlSet\Services REPARSE Desired Access: Read
21:50:33.8109497 svchost.exe 772 RegOpenKey HKLM\System\CurrentControlSet\Services SUCCESS Desired Access: Read
21:50:33.8110051 svchost.exe 772 RegCloseKey HKLM SUCCESS
21:50:33.8110423 svchost.exe 772 RegQueryKey HKLM\System\CurrentControlSet\services SUCCESS Query: HandleTags, HandleTags: 0x0
21:50:33.8110705 svchost.exe 772 RegOpenKey HKLM\System\CurrentControlSet\services\eventlog SUCCESS Desired Access: Read
21:50:33.8110923 svchost.exe 772 RegQueryKey HKLM\System\CurrentControlSet\services\eventlog SUCCESS Query: HandleTags, HandleTags: 0x0
21:50:33.8111257 svchost.exe 772 RegOpenKey HKLM\System\CurrentControlSet\services\eventlog\Parameters SUCCESS Desired Access: Read
21:50:33.8111547 svchost.exe 772 RegCloseKey HKLM\System\CurrentControlSet\services SUCCESS
21:50:33.8111752 svchost.exe 772 RegCloseKey HKLM\System\CurrentControlSet\services\eventlog SUCCESS
21:50:33.8111901 svchost.exe 772 RegQueryValue HKLM\System\CurrentControlSet\services\eventlog\Parameters\ServiceDll SUCCESS Type: REG_SZ, Length: 68, Data: %SystemRoot%\System32\wevtsvc.dll
21:50:33.8112148 svchost.exe 772 RegCloseKey HKLM\System\CurrentControlSet\services\eventlog\Parameters SUCCESS
21:50:33.8116552 svchost.exe 772 Thread Exit SUCCESS Thread ID: 6088, User Time: 0.0000000, Kernel Time: 0.0000000
NOTE: previoulsy, for
21:46:31.6130476 svchost.exe 772 RegQueryValue HKLM\System\CurrentControlSet\services\eventlog\Parameters\ServiceDll SUCCESS Type: REG_SZ, Length: 68, Data: %SystemRoot%\System32\wevtsvc.dll
I also got NAME
NOT FOUND error ,so I created the new string value for the Parameters with
the name ServiceDll and
data %SystemRoot%\System32\wevtsvc.dll (copied
from the upper HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\eventlog key)
and this event now is
21:46:31.6130476 svchost.exe 772 RegQueryValue HKLM\System\CurrentControlSet\services\eventlog\Parameters\ServiceDll SUCCESS Type: REG_SZ, Length: 68, Data: %SystemRoot%\System32\wevtsvc.dll
I also checked for the presence of wevtsvc.dll in
the place and it's there.
Also, I tried to capture all events with path containing 'event' and
got following events firing every several seconds:
21:38:38.9185226 services.exe 492 RegQueryValue HKLM\System\CurrentControlSet\services\EventSystem\Tag NAME NOT FOUND Length: 16
21:38:38.9185513 services.exe 492 RegQueryValue HKLM\System\CurrentControlSet\services\EventSystem\DependOnGroup NAME NOT FOUND Length: 268
21:38:38.9185938 services.exe 492 RegQueryValue HKLM\System\CurrentControlSet\services\EventSystem\Group NAME NOT FOUND Length: 268
Also, I tried to capture all the events containing 'file',
excluding w3wp.exe,
chrome.exe, wmiprvse.exe, wmtoolsd.exe, System and it shows NO attempts to access any file ih the time I try to start
the event logger (if run from cmd - there are several hits by net executable,
not present if run from the panel).
What can be done?Hi,
I don’t found the similar issue, if you have the IE 11 please try to update system automatic or install the MS14-029 update.
The related KB:
MS14-029: Security update for Internet Explorer 11 for systems that do not have update 2919355 (for Windows 8.1 or Windows Server 2012 R2) or update 2929437 (for Windows 7
SP1 or Windows Server 2008 R2 SP1) installed: May 13, 2014
http://support.microsoft.com/kb/2961851/en-us
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
How to create restore point in windows server 2008 service pack1
hi i am bhaskar ... how to create restore point in windows server 2008 service pack1 and how to restore system from a restore point in windows server 2008 service pack1.. is this option available or not ? what is the difference between shadow copies and
restore point ? instead of restore point we have this shadow copies option in windows server 2008 ?BhaskarAFIK, Restore Points doesn’t exist in Windows 2008.
Volume Shadow Copy option can be used to achieve:
Creating consistent backups of open files and applications
Creating shadow copies for shared folders
Creating transportable shadow copies using a hardware provider — for backup, testing and data mining scenarios
Quickly recovering and restoring files and data
It is more like a file, data, application backup.
Santhosh Sivarajan | MCTS, MCSE (W2K3/W2K/NT4), MCSA (W2K3/W2K/MSG), CCNA, Network+ Houston, TX
Blogs - http://blogs.sivarajan.com/
Articles - http://www.sivarajan.com/publications.html
Twitter: @santhosh_sivara - http://twitter.com/santhosh_sivara
This posting is provided AS IS with no warranties, and confers no rights.
Maybe you are looking for
-
How do I get CDs that have been imported into my iTunes library to sync/transfer to my iPhone?? All the material that I purchased from iTunes has transferred just fine, but although the CDs will import to iTunes, they will not sync up with my phone.
-
Funds Mangement - Fund center derivation error at the time of PO/MIGO
Hello - Generally ,If FM account assignements are available in purchase requisition , same should be carried to purchase order and to the good receipts. But I am getting an error at the time of PO or MIGO that " Fund center not derived'. Why this hap
-
Audigy 2 Value with Windows Vista 32-
I have a situation where I have the beta driver working for my Audigy 2 Value but Windows does not give me a choice to select a 7. setup. It only allows a mono and 2 channel setup. With the Creative program that came with the driver I was able to sel
-
Supersession(material exchange)in 3rd party PO(DIMP/IS Auto)
Hi, Could anyone please tell how the material exchange is handled in supersession for 3rd party PO? I tried to do material exchange in PO created against a sales order and I got the error message MPN01032 (This function is only possible for certain i
-
Upgrading Mac Pro boot drive?
I've got a Mac pro, 8 core, fast, etc. But it has a 300 GB HD which I've done a pretty good job of filling up. Right now, no problems, but I only have 48 GB free on that drive. I also have a one TB data drive (I'm a photographer, lots of RAW images o