Update Windows xp in NI PXI-8106 controler? Can any issues arise?

Hello.
We're using a NI PXI-1052 Chassis with a NI PXI-8106 controler, using Windows XP.
Windows has asked to install some updates (Windows only, nothing directly related to the PXI controler)
Is it possible that some conflicts will arise with the controler?
Thank you in advance.

Hello Gonçalo Vitor,
Thanks for posting on National Instruments forum.
You can update your Windows on your PXI-8106 controller it won't result conflicts.
Benjamin R.
R&D Software Development Manager
http://www.fluigent.com/

Similar Messages

Hi, i am having a problem in my ipad 2 , it is not showing main screen just showing a black blank screen in which downloading icon is only shwn which is continously and when i connect to itunes via windows 7 it showing this error (0xE8000065) can any one

hi, i am having a problem in my ipad 2 , it is not showing main screen just showing a black blank screen in which downloading icon is only shwn which is continously and when i connect to itunes via windows 7 it showing this error (0xE8000065) can any one

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.

I have itunes 10.5.2 Can I download and update directly to the latest version of itunes without any issues?

I have itunes 10.5.2 Can i download and update directly to the latest version of itunes without any issues?

Yes, but back up the library first. Note that if you're using Mac OS X 10.5.8, you won't be able to update iTunes past 10.6.3.
(96898)

I couldn't install itunes in windows 7, 64 bit, DLL not found, can any one assist

Windows 7, 64 bit, unable to install. DLL missing, kindly assist.

That's perfect, thanks.
Although you're getting a different error message, try the procedure from the following user tip with that one:
"The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems

Pxi-8106のwindowsアップデート

お世話になります。
PXI-8016を使用しております。
OSはwindows xpなのですが、
この度windows7へとアップデートを予定しております。
外付けCD/DVDドライバを利用し、普通のPCのように、アップデート出来ますでしょうか?
よろしくお願いします。

t3さん
ドライバは、以下のとおりVista用までしか入手できないようです。
NI PXI-8106 Peripheral Drivers - Windows Vista/XP
http://www.ni.com/download/ni-pxi-8106-peripheral-drivers/1442/en/
ここで以下によるとVista用のドライバを使用してWinodows 7のインストールを試みたがだめだったとのことでした。PXIではなくPXIeであったり他の詳しい状況はわかりませんが。ただ以下のBIOSアップデートを行えばうまくいかもしれません。
Windows 7 drivers for PXIe-8106
http://forums.ni.com/t5/PXI/Windows-7-drivers-for-PXIe-8106/td-p/2576511
NI PXI-8106 BIOS 2.0 - USB Drive Image - Windows 7/Vista/XP 32-bit/2000 (こちらはWindows 7との記載があります)
http://www.ni.com/download/ni-pxi-8106-bios-2.0/3788/en/
BIOSアップデート > Winodows 7インストール > Vista用のドライバインストール
でうまくいく可能性もあるかもしれませんね。

Pxi-8106 driver

Hi,
I need to install windows 7 in a PXI-8106. I found this link with XP/Vista drivers :
http://digital.ni.com/public.nsf/allkb/E4503CC7E8BB41BA86256F7F006CBE8D
Can I install this on windows 7 ?
Thanks
Juan
Solved!
Go to Solution.

Hello
1) DEV C801 = GPIB Controller Interface Board
Should be resolved by installing the GPIB drivers:
http://www.ni.com/download/ni-488.2-3.1.2/4360/en/
2) Hardware ID ACPI\NIC7019
Should be resolved by installing the driver at the bottom of this post:
http://forums.ni.com/t5/PXI/Update-PXI-8110-image-to-Windows-7/td-p/1127928
3) Hardware ID Vendor 1093 = NI and DEV 71B9
I'm not a 100% sure, but this could be resolved by installing this driver:
http://www.ni.com/download/pxi-platform-services-3.2.3/4186/en/
Kind Regards,
Thierry C - Applications Engineering Specialist Northern European Region - National Instruments
CLD, CTA
If someone helped you, let them know. Mark as solved and/or give a kudo.

How do I open the updates window in "Adobe Application Manager"?

How do I open the updates window in "Adobe Application Manager"? Or can I or should I....??
I am a brand new Cloud member. I heard of the Retina update. Assuming this was where the updates would logically appear I went to the "Adobe Application Manager" app first. Without closing the "Adobe Application Manager" I opened Photoshop and went to the help menu and selected "Updates..."; a second window opened in the already open "Adobe Application Manager".
I selected update all.
The result is below:
DW CS6 12.1 Creative Cloud
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Dreamweaver CS6 12.0.1 update to address critical issues
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Photoshop 13.1 for Creative Cloud
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Adobe InDesign CS6 8.0.1 update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Adobe Bridge CS6 5.0.1 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Adobe Illustrator CS6 Update (version 16.2.0)
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
DPS Desktop Tools CS6 2.05.1 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Dynamic Link Media Server CS6 1.0.1 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Photoshop Camera Raw 7.2
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Extension Manager 6.0.4 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Adobe Media Encoder CS6 6.0.2 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Now, I closed the "Adobe Application Manager" and opened "Photoshop" again and again selected "Updates..." from the help menu. The "Adobe Application Manager" opened again with just one window this time and the updates happened correctly.
I was hoping one of the updates would be to the "Adobe Application Manager", I don't think so.
So, If I were you I wouldn't select "Updates..." from an Adobe app unless the "Adobe Application Manager" is closed until they fix it...
Current version: Adobe® Application Manager - Version 7.0.0.128 (7.0.0.128) Note the Two windows in the "Adobe Application Manager" in the attached image.

The updates are currently available by going to Help>Updates within the Application. Once you invoke the Updater, which is a component of the Adobe Application Manager, it will locate and apply the updates. It looks like most of your updates have failed to install. I would recommend you begin by trying to apply the updates that are available on our product update page at http://www.adobe.com/downloads/updates/ and seeing if you face the same difficulty.
If you continue to experience problems with applying the updates then please review your installation log to determine the cause of the failure. You can find details on how to locate and interpret the installation log at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

Memory upgrade on PXI-8105 and PXI-8106 controllers

Hi,
I've recently upgraded the memory of three PXIs; one with a PXI-8105 controller and two with PXI-8106 controllers. Both the 8105 and 8105 can take a maximum of 4GB (2x2GB) of DDR2-677 (PC2-5300) memory (see links below). However, on all three systems, both the BIOS and the O/S only see 3.3GB. Any idea why this might be the case?
I've tried flashing the BIOS (v1.4 on both PXIs), but with no success.
We're using COTS memory (i.e. not bought from NI) but I'd be hard pushed to believe that that is the cause of the problem.
Thanks.
Links;
Max memory capacity of PXI-8105 http://sine.ni.com/nips/cds/view/p/lang/en/nid/202630
Max memory capacity of PXI-8106 http://sine.ni.com/nips/cds/view/p/lang/en/nid/203442
BIOS upgrade page: http://digital.ni.com/public.nsf/allkb/9C9362590B05CD6E86256B270082164A
Solved!
Go to Solution.

Are these controllers running Windows? If so, this is normal expected behavior. I think it might have something to do with the fact that Windows reserves the rest of the memory for driver addressing (could be totally wrong there). The same thing happens on my Dell desktop PC with 4GB of memory in it.
Jarrod S.
National Instruments

I Get an error every time I try to update Windows 8.1 or update Defender (EXE On top "Class not Registered")

I think my lap top has a lot more problems, then the sun has Hot spots! :)
(not that I am down playing any one's situation, nor want to sound cynical or Condescending).
Though many of my issues have been resolved through a LOT of time, tech support and a couple friends and personal researching.
But I get the "Class not Registered" Every time I try to update Windows,
(I have Mozilla Firefox 30 and Windows 8.1)
On Top of small Error box, I get EXE..on top. But Inside the error box "Class not Registered"
Some of the other issues or problems were self inflicted by not researching properly, so to say the least I am being extremely cautious.
I have the same issue with Class not Registered, and looking for some ideas or hopefully the solution.
After I try running a windows update and any updates for my virus scan "Defender" which is what I believe windows 8 and 8.1 uses, I am not sure about Vista or Windows 7 have, I never used them.
I went right to 8 through a new lap top. Then I got Windows 8.1 (that was about a month ago)
But if anyone does find or even know an answer please reply as soon as you are able, anyone else who may just be reading, if someone gets anything that did work for them, Please Let me know.
Due to time I couldn't read through more Forum suggestions or links that may work for
My Error EXE. "Class Not Registered" :)
BUT will return later in day. Maybe anything I found an answer for I can pass on. i Have had plenty issues since I had a type of crash (Or whatever it was when I was online with a Tech from Microsoft and and he had it so both of us could control the Arrow cursor, I double checked phone number for MS and it checked out legit,
That was the beginning of many days of constant repairing That was back around July 6th 2014 Thanks to everyone who even just reads this, BuddyD

This is might because of your prior change in softwares. so first you have to do run '''sfc''' in run command. and then you see the specific problem which causes this . Since System File Checker (sfc) scan will make Windows replace corrupt or missing system files on your computer.
* Click Start>All Programs>Accessories>right-click Command Prompt, and select Run as Administrator.
* Click Continue or supply Administrator credentials if prompted.
* In the Command Prompt window type the following, and press Enter:
sfc /scannow
Refer this KB article for more information:
http://support.microsoft.com/kb/929833
See this is not a problem of firefox till now. You can check more with microsoft answers site.

Premiere CC doesn't display/update windows sometimes in Windows 8

Just recently, with Windows 8 and Premiere CC, I get a bug that makes Premiere unusable. Certain windows don't draw or update regularly. See attached screenshot (https://dl.dropboxusercontent.com/u/651378/premiere%20windows%20not%20showing.PNG). Notice how I don't even have a timeline windows showing. Once I select the 'Media Browser' tab in the top left window, my timeline magically appears.
While editing in the timeline, changes don't show, making it very hard to edit. The timeline window only gets updated periodically.
Even rebooting does not correct this. It doesn't always happen, but when it does, I can't correct it. This happens with no other application.

Now to expand on my question (was running out of the door earlier, so it was curt).
I am the guy who experienced similar issues on Windows 7 and then after clean install of Windows 8.1 the issues went away. Yesterday, however, I had to open an existing project that required cineform codec to be installed so I went ahead and reinstalled and reactivated Cinefrom Studio Premium (2.0.0.285).
Did not have any issues with it yesterday. Today, on the other hand (and after a computer restart) I made a new project for something else I am working on which doesn't even contain any cineform footage, and then I had to go to the effect panel when I saw the dredded Search Field Hole.
Sure enough, all of the bad behaviors came back - an inability to untwhirl effect controls and wierd CTI behavior. Will try to uninstall Cinefrom later tonight to see if that was an issue.
On the side note Cineform has really dropped the ball lately. Pretty much unusable as a professional codec: timecode issues (non standard behavior), 23.9762 interpreted as 23.9800 etc.

Cannot view quicktime window normal size and still see controls!

Help!
I cannot view quicktime window normal size and still see control butttons (pause, play etc.)
I search this forum and found another previous similar question, but the answer. (To use control+0, which would make it half-size.), is not what I need.
What I need is to have a nice fuller size view, (not the narrow little half-size), but any way i find of doing that hides the controls below the bottom of my screen!
I cannot resize it from any side, except the bottom r. corner, which is hidden with these desireable fuller options.

Update: this was my mistake - I had neglected to configure all the view containers in the WebDynproCO window, which was generated by adding the GP interface to the component. All is well.

Unable to install the RT Watchdog on a PXI-8106 RT controller

Hi,
After upgrading my NI Developper Suite from rel. 8.2 to 8.2.1 (clean install, means deinstalling the rel. 8.2 and new install of rel. 8.2.1, incl. DAQmx 8.5).
Installing the software trough MAXn the new PXI-8106 RT controller, everything is working okay except the installation of the NI Watchdog 2.1.5f0. For any reason, the module does not appears in the listing of the National Instruments Real-Time software displayed by MAX but a check of the LabVIEW installation on the PC (Windows XP SP2) confirm that all elements are available on the host. A second installation does not help and the module NI_Watchdog still not appears in the listing
What is wrong? Does the new PXI 8106 controller not support the watchdog timer function?
Thank's for all reply
Philippe

This thread was resolved by enabling the SQL browser agent with domain account

No video or network access from a PXI-8106

I have a PXI-8106 embedded processor in a 1052 combo chassis running Windows XP. Up until about a week ago it was working fine. Now I can't get a video signal to a monitor or any network connection. The system administrator says it doesn't show up on the network at all and there is a link light and activity showing on the network port. Help!!! Do I need to buy a new processor?

Hi stro1rob,
Can you please verify the LED's on the front panel of the chassis when you have the controller powered on?
The POWER OK LED indicates the power status of the controller and will either be ON and steady, blinking, or OFF. The DRIVE LED indicates when an access to the internal hard disk is occurring.
Try hooking up another DVI monitor (that is known to work) to your chassis. There could be a number of things going on right now, so we should try isolating the problem. I'm assuming that you are also connected to your network via the Ethernet port, so I would try connecting again with another cable.
Here is a KB that discusses a BIOS issue that can cause your video output to disappear, but since you have mentioned that your setup originally worked, I doubt this is the case, but it might still be worth looking at.
If the above mentioned things do not work out, you would probably need to get your controller RMA'ed. To do so, please call into NI Support.
Jason L.
Product Support Engineer
National Instruments

AV update & windows update for NAC environment

Hi all
If user-company already has their own "Anti-Virus Server" or "Windows-update Server", can CAM refer to their servers(not Cisco's policy-update-server) to get current update files?
waiting your replies
regards

The below URL describes how to configure the Antivirus (AV) Definition Update requirements in the Cisco Network Admission Control (NAC) Appliance, formerly known as Cisco Clean Access.
http://www.cisco.com/en/US/products/ps6128/products_configuration_example09186a00808a50c5.shtml#conf

Cant adjust my brightness setting after updating window 8.1

My comp cant adjust its brightness and its super bright help please?

Hi,
How to Find the HP Model Number and the HP Product Number or let HP automatically find your PC model number and HP network attached printers.
There are numerous driver updates posted under Windows 8.1
Start with the chipset then reboot and apply the others.
See if you then can adjust the brightness via the Windows 8 settings then the Intel Control Panel Display.
Try the firmware update posted under Windows 8 if all else fails.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Update Windows xp in NI PXI-8106 controler? Can any issues arise?

Similar Messages

Maybe you are looking for