Update with EAP SIM
Free Mobile, provider in France, uses now Eap-sim on his network Free Wifi!
The request of this compatibility will be now important from french customers!
I see that Xperia S has this Eap-sim while it is absent in Android 4!
So it is Sony who has added it!
On my Xperia Mini St15, I have EAP 802.1x but not SIM
Can we expect it on our future updates (Android 4 for 2011 phones)? I hope...:smileywink:
Regards
It is very true that Xperia S support this. Other phones do however not support it at this point and I have no information regarding future changes for these phones.
Since Xperia S has it I guess it's not impossible but I do not know if there are any plans for the other phones to get it or not. We have to wait and see I guess. I will try to remember to post again if I get any new info on this.
What do you think about this forum? Let us know by doing this short survey.
Similar Messages
-
Quick summary: Living in France for 3 months and put AT&T account on hold. They told me that if I accidentally made a call from my phone it would automatically take me off hold and resume my monthly AT&T service fees. So I took the card out. All summer I have been transferring stuff to the phone and using it basically as an iTouch. I just updated my iTunes to get either a podcast or show that required the update and then went to update the phone too to transfer that content to the phone. Whoops. Didn't know you couldn't update the phone without the SIM b/c I have never not had a SIM in there while updating.
From what I have read, to fix this you install the SIM used to originally activate the phone. That was my husband's old card which he no longer has as he handed the phone down to me. Is there anything I can do to get my phone to connect again?
Thanks so much for any help you guys can provide.
ShannonI have an AT&T SIM in the phone right now and it is not working. Regarding the need to have the original SIM used to activate the phone, I am not sure that is quite right. The SIM used to activate my phone was used for only about a month and then my husband decided to put the SIM he had in his blackberry into the iPhone and use it for work. He then discovered that his company did not support email on the iPhone so he went back to the blackberry and gave me the phone. I switched to AT&T from Verizon, transferring my number, and AT&T gave me a new SIM and I bought a data plan. Since all this I have updated the phone at least twice and never had this problem. I made these two updates with MY sim in the phone and not my husband's first temporary SIM which is long since gone.
-
Lumia 920 EAP-SIM WiFi Settings
Please help me,
How to configure Lumia 920 to use EAP-SIM security, In the specification page it say support EAP-SIM.
I Can't choose security type from WiFi setting, even from advanced setting. Lumia 920 always ask username & password everytime I try to connect to my operator WiFi, in blackberry I can choose EAP-SIM Security & don't need entering username & password.
Sorry fo my English.
Thank yousam_kara, this thread is about WPA-Enterprise with EAP-SIM. In your case, you are using TLS or TTLS or … you have to figure out which outer and inner EAP types your company uses. Then you can vote for it:
TLS
TTLS
rioagusw wrote:
How to configure Lumia 920 to use EAP-SIM security.
With EAP-SIM you do not configure anything, it just works. However, have a look …
Where did you read about Windows Phone 8 supporting EAP-SIM? The qualification says something different. -
I had already update mi new factory unlocked iPhone 4S to iOS 5.1.1 and I still having problems with "invalid sim". I'm from Argentina and here we don't have official service. PLEASE HELP ME, WHAT CAN I DO??? In Argentina is too expensive an iPhone 4S. Please I need help to continue believing in Apple. Thanks a lot. If anybody speak spanish better.
Was it purchased from an official Apple Store, not a reseller? Only Apple Stores sell official factory unlocked phones. The others sell hacked to unlock phones, and the unlocking is unstable.
Try these steps, as needed:
1. Reset phone - press both home and on/off buttons for at least 10 seconds until the Apple logo appears.
2. Settings > General > Reset > Reset Network Settings.
3. Replace SIM card (and reset network settings again)
4. Restore Phone in iTunes using a backup
5. Restore in iTunes as new, without using a backup -
I bought the company unlocked phone from apple store Canada. It was originally loaded with software 4.2 and was working fine here in SaudiArabia. Yesterday I updated with IOS 5.0.1. Now it is showing that sim is not valid. The same sim works fine in other phones.
Here's and update on my problems and here are are some screen shots of the types of problems I've been having since the v5.0.1 update. Keep in mind these are native apps and I have tried the rebuild phone crap many times, nothing helps.
This is screen shot of a what happened when I tried to use my camera one day, both the front and back cameras were all black. I had to power cycle the phone to get rid of this problem. The cameras appeared to be working correctly, I could focus and zoom but it was all black.
Here is an image of what happened when I searched for something in a map. This is after I picked the choice I wanted, the keyboard disappeared but the list didn't. I had to force close the app and restart it for this problem to go away. Who knew five bars on ATT was possible.
And finally this is the messaging app, although you would not know it. I had to return to home screen (after a long pause for it to process the button push) and return to the messaging app. This happens all the time with the messaging app and the notifications sounds drive me crazy. If i'm using the phone, say browsing the web and I get an incoming message its almost 100% of the time the messaging app will screw up. The sound will play at the wrong time or not at all, message will show up in notifications and diasapear in message app or Ill have a problem like this: -
I bought an iphone4s before my carrier put my sim in it i updated itunes now wont work with my sim
I bought an iphone4s before my carrier put my sim in it i updated itunes now wont work with my sim
Hello Aaron1658,
It sounds like you are unable to activate your phone with the SIM provided to you by your carrier. Try these steps in the following article to help you troubleshoot what it happening, named:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/ts3424
Symptoms
Your iPhone may display one of the following messages when you attempt to activate it:
"Your iPhone could not be activated because the activation server is temporarily unavailable."
"The SIM card inserted in this iPhone does not appear to be supported"
"The iPhone is not recognized and cannot be activated for service."
"iTunes was unable to verify your device."
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to a known-good Wi-Fi network if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.
If this is not what you are referring to, would you provide some more information about what is happening? Any error messages, prompts, etc.?
Thank you for using Apple Support Communities.
All the very best,
Sterling -
i have bought a iphone 4s from uk. but i face problem in using sim on it. this is updated with 6.0.1 version. this phone also have a chip in sim plate. now how could i use it?
Where did you purchase in UK and is the iPhone carrier locked ??
-
I updated my ipad2 to ios7 after that , iam facing problems with my sim, it showing no sim card after inserting sim. there is no prbolem with my sim.
arun kumar chenna123 wrote:
i have updated my iphone to ios4.1. after installation, it is showing as"The SIM card inserted in this iPhone does not appear to be supported. only compatible sim cards from a supported carrier may be used to activate iphone. Please insert the sim card that came with your iphone...."
how to solve this problem. I don't have any sim cards that came with iphone.
Please help out to solve this problem.
It sounds like the phone was hacked or jailbroken, and updating it locked it to the original carrier. As it is not possible to update to any version other than the current one (5.1) the fact that you updated to 4.1 pretty much confirms the phone was hacked. There is no solution that you can get in an Apple forum. -
my iphone 5 is on contract from verizon,now i'm on trip to india.
can i acess gsm in india is it unlock
and my iphone shows ios update so can i update it to ios 7 with indian sim card?Verizon iPhones are GSM unlocked by default, so get a SIM and try it.
-
My 3G I Phone Not Working With My SIM Card After I Updated my phone
my 3g iphone now ner not working with my sim card aftet i updated my iphone
Was your phone originally locked to a different carrier?
-
hello
im using unlock iphone with turbo sim card. i update my iphone to the new version IOS 5 and some bug were found. so, i restore my iphone to standard iphone. but, my iphone can not connect to itunes anymore, it said that the SIMcard inserted does not appear to be supported. so. i can't continue restoring my iphone. what do i need to do??? can anyone help me....You need a SIM from the original carrier.
-
I am using iphone 3s after updating my phone it is not reading the sim i tried with different sim's but none worked can you please help me
There is no iPhone 3s.
What is displaying on the device?
Has the device ever been hacked or jailbroken? -
Hey guys....
I just recently encountered a strange issue which no makes sense.
I have a 16GB Black iPhone 3GS **LOCKED** to Rogers, never been unlocked, was given to me by Apple as a replacement.
It was on 4.3.3 and was getting a little slow so I decided to do an update + restore to 4.3.5.
After the restore and update, iTunes gave me the "the SIM card inserted into this phone does not appear to be supported" error... so I can't get past the emergency call screen.
I tried restoring in DFU and with diff comps PLUS diff Rogers SIM cards and no dice.
Also tried restoring with/without SIM card in during restore.
Any ideas on how this has happened and how I can fix it?
It's no longer under warranty so I know I can't go to the Genius Bar, even though technically it's their faulty phone...I would still take it to the Genius Bar and see what they say. Worst case scenario, since it's out of warranty, they'll offer you an out of warranty exchange, which will roughly be 200 Canadian dollars.
-
i can't activate my iphone using itunes after updating with ios 5.1. it shows no sim installed. what i'll do??? please! help me.
phone your network provider,and ask them to send you a new sim card.
-
Dear sir
I bought my iPhone 4 from Apple store in Charlotte N/C about 2years ago without contract.
Now I tried to upgrade it to iOS 7.0.4.but after that my phone not work with last sim card.
And invalid sim appeared.so I bought it without contract but it seems to be lock in my country
Please tell me whats the matter?
My phone serial no 86034HTCA4T
Modem firmware 04.12.09
ThanksWithout contract is not the same as unlocked. The update to iOS 7 relocked
the iPhone to the wireless carrier to which it was originally locked. You must
contact that wireless carrier to see if they offer unlocking and if you qualify.
If you used jailbreak or other hack to unlock the iPhone initially, the method
used may prevent a legitimate unlock from succeeding and may render your
iPhone unuseable.
Maybe you are looking for
-
Sales and Closing Stock By Item Group
Dear all, Can anybody give me modified query for the following code. I need Item Group wise sales & Stock. As of this query data values are not getting perfect,opening stock and Closing stock values are not getting prefect. Some items are not gettin
-
Need to display "Calendar Month/Year" at report level from Calendar Day
Hello Experts, I have a scenario in which I have 0CALDAY (e.g. 01.01.2009) along with other fields available in my report. My requirement is to display "Calendar Month/Year" (01.2009) in my report. Is it possible to have "Calendar Month/Year" in my r
-
Update in OWB mapping not working
Hi, I have a source table S1 from which one column X i am passing to a function F as input parameter to get a column value Y from another source table S2(by using database links). In short Table S1 and Table S2 are not on the same server. I am passin
-
Using database link to connect to two databases
Hi guys, Here's my question. I need to give a contractor Select rights on tables located in two schemas located on two different servers. One server is dev and one is prod. Let's say we have schema user: EMPLOYEE on dev and schema user: DEPARTMENT on
-
Off Topic, But I Need An Answer (About Buying an iBook G3)
I was looking around on eBay for different stuff and I came across several iBook G3's (the colored ones). I know that technology has changed a lot, but I think it would be cool to have one just to fool around on and show off (it would turn heads). I