Update Work Process - Different value in SM51 & TU02...which is correct?

Hi,
i am checking update work process configured in the system.
In SM51, i am getting 36 update work process but when i checked it through transaction
TU02 -> Active parameter, i found the parameter rdisp/wp_no_vb value is 16.
Am surprised to see the different value at different place, how its possible.
which is true, how many update work process is configured in the system?
regards,
Rakesh

Hello Rakesh Ranjan,
We all realized that you already solved the problem but unfortunately you closed this message without saying anything, what had actually happened and how you solved this problem... if you don´t mind share with all community (so that in future other users can solve the same situation with this post!
Best regards,
João Dimas - Portugal

Similar Messages

Update Work Process and Background work process

Hi Friends,
I have a doubt regarding the "Update Work Process and Background work process" ......
which one is used at what scenario ?????
If not wrong --> update work process is used when there is an update task .........??? and similarly If background work process is used when there a background task is given explicitly .........???
Can we can update anything through Background>????
If yes .... which workprocess will be selected at that time??????
Expecting your answers ??
Thanks in advance !!
Cheers
R.Kripa.

HI
GOOD
UPDATE WORK PROCESS->
http://help.sap.com/saphelp_nw04s/helpdata/en/e5/de86e135cd11d3acb00000e83539c3/content.htm
BACKGROUND WORK PROCESS->
http://help.sap.com/saphelp_nw2004s/helpdata/en/4a/2d513897110872e10000009b38f889/content.htm
THANKS
MRUTYUN

How to stop update work process

hi
this is mahesh
in my dev server 3 update workprocess are running very long time .how to stop that 3 update workprocess .i am already deleted the error update record in sm13
pls tell me how to change this work process running mode to waiting mode.pls give me solution.

Hi mahesh,
I guess you want to terminate the workprocesses.
Go to SM50 select the update process you want to terminate then in menu bar goto Process and then select Cancel without core.it might take some time but the workprocess will get terminated.
In case it takes too much of a time kill it at OS level.
Please award points accordingly.
Regards.
Ruchit.
Message was edited by:
Ruchit Khushu

How table GLT0 work? (Different value between GLT0 and BSAS)

Anyone know about how the table GLT0 work?
After checked in sapenote sapnote 100273 which said "For an FI posting (for example, with Transaction FB01),
the balances resulting from the posting are updated twice in the G/L Account Monthly
Debits and Credits (table GLT0)."
So, Any change amount value of items in accounting doc. This problem should to update, correct?
For any change of amount value in item of accounting doc and currencies is change.
Need to reupdate this table with new currencies? or any logic
Now, I found a problem is "Account balance" value in currency group (USD) in transaction FS10
and total sum of "USD Amount" in transaction code FBL3 (If click to sum by currency)
are different for 17.79 USD.
I tried to get a logic of this 2 transaction code and found detail as below:
FS10 : Get data from table GLT0 and for group currency report. Program select data
from field KSLVT and KSLXX to display in report.
FBL3 : Get all data until selected period in table BSAS and sum total amount from field BSAS-DMBE2
(Amount of USD Currency)
Actually, This 2 report should to have the same account balance.
So, My question is
1. When the table (GLT0) update?
2. Can have a problem with the data in GLT0 (field KSLVT and KSLXX t)
and sum of amount USD curency BSAS-DMBE2 are differenct?
If can have, how is occur?
Many thank in advance.

Hi,
Did you find any relationship between the data (sql data and Essbase)?
While you are loading fresh data, there is no discrepancy.
You find discrepancy at the time of incremental loading.
It might be possible in incremental loading data can be added to already existing value in dimension.
In that case you will find your Essbase data is 2times or 3 times more than base data (sql).
Then check there might be some setting.
Thanks
Dhanjit G

Release strategy on doc. level isn't working because different values for B

Hi,
At my company we just created a new release strategy (3rd) for PR's. The old strategies were on item level, the new one is on document level. This is the third strategy in the system and with every new PR the strategy is decided based on the creation date (table EBAN field BADAT). For example:
Strategy 1 - BADAT < 2009.01.01
Strategy 2 - BADAT >- 2010.01.01 AND BADAT < 2011.01.01
Strategy 3 - BADAT >2011.01.01
These selection criteria are stored in the class.
This used to work fine between the 1st and 2nd strategy but now it doesn't. Whenever a new line item is added on a different day than the other line(s) the value's for BADAT will be different within the PR and the system isn't able to select a strategy. It's like no value is used for BADAT because there are more than 1 available. As a result the release tab will disappear and the PR will be ready to create a PO from it.
For example:
Line 1 BADAT 15.09.2011
Line 2 BADAT 15.09.2011
No problem releasing the PR
Line 3 BADAT 17.09.2011 added (release strategy reset)
Release tab disappears so no release can be done. However, this PR line 3 can now be converted into an PO without being ever released.
One solution we thought about is using the PR number BANFN. But no ranges are allowed in the class so it doesn't seem to work. Another option is to delete al the old strategies but what will be the consequences for all the old PR's?
We are not sure what to use. Maybe someone else worked out this issue before or has an idea?

Hi,
First of all why you want to release a PR based on Creation date ?
Anyhow, as I understand from the above explanation, since you have created your 3rd strategy @ header/document level. You are facing this issue.
If you have a strategy @ document level then why you want 2 separate strategies @ item level.
Following are the possible solutions as per my understanding
1. You can make the 3rd strategy as item level itself so that the different creation date for different items wont be a problem.
2. You don't have to delete the Old release strategies instead you can remove the characteristics assignment so that release strategy wont be determined @ item level & you can keep the new release @ document level. But in this case you cannot have creation date as a characteristic since it will result in the same issue..
Thanks & Regards,

Update work process has too high respose time.

Our functional team is facing issue while saving data in va03 transaction. IT prompts Sales order saved successfully and when we go to va02 and try to open getting error Document "SD document not in database or has been archived"
So when I checked sm66 update WP is on hold due to RFC response. and in st03 it has high response time
Task steps response time wait time
UPDATE2 2 1.130,0 335,0 65,0 724,0 0,0 0,0 0,0 0,0 70,5
UPDATE 29 1.188.035,2 19,6 8,6 35,9 0,0 1.187.979,4 0,0 0,0 0,3
Also in SM13 all updates are at Initial status. Nothing get updated in database.
Please help as functional team is no more able to work and as basis person We need to resolve the same.

Hi Spr,
Please check the following
1) Update has status active in SM13
2) You have enough space in the oraarch directory
3) You have enough space in tablespaces
4) Check for any error message on in alert_<SID>.log file
5) Update oracle dictionary, missing and all statistics in the database.
Hope this helps.
Regards,
Deepak Kori

How to update a column with different values but all other row values r sam

Hi,
I have a table like this.
Col1 col2 col3 col4
10 20 30
10 20 30
10 20 30
i need to update col4 with different values coming from other table like this
Col1 col2 col3 col4
10 20 30 xxxx
10 20 30 yyyy
10 20 30 zzzz
how can i update the table. pls let me know how to use the where condition in the update stmt.
thanks,
jay
Edited by: user2558790 on Nov 20, 2009 12:26 PM

what is the logic for this kind of update...????
Greetings,
Sim

What is work process

What is Process ? For SYnchronous and Asynchronous updates where do data store temporarly ? and for local update also?
Regards,
Prasad

hi,
work process
Work processes execute the individual dialog steps in R/3 applications. The next two sections describe firstly the structure of a work process, and secondly the different types of work process in the R/3 System.
Types of Work Process
Dialog Work Process
Dialog work processes deal with requests from an active user to execute dialog steps.
Update Work Process
Update work processes execute database update requests. Update requests are part of an SAP LUW that bundle the database operations resulting from the dialog in a database LUW for processing in the background.
Background Work Process
Background work processes process programs that can be executed without user interaction (background jobs).
Enqueue Work Process
The enqueue work process administers a lock table in the shared memory area. The lock table contains the logical database locks for the R/3 System and is an important part of the SAP LUW concept. In an R/3 System, you may only have one lock table. You may therefore also only have one application server with enqueue work processes.
Spool Work Process
The spool work process passes sequential datasets to a printer or to optical archiving. Each application server may contain only one spool work process.
The services offered by an application server are determined by the types of its work processes. One application server may, of course, have more than one function. For example, it may be both a dialog server and the enqueue server, if it has several dialog work processes and an enqueue work process.
You can use the system administration functions to switch a work process between dialog and background modes while the system is still running. This allows you, for example, to switch an R/3 System between day and night operation, where you have more dialog than background work processes during the day, and the other way around during the night.
hope it will help u
chetan vishnoi

No changes in Work Processes after restarting the SAP Instance

Dear All,
I have made some changes in the Application Servers.
I had 22 work processes on my Application Servers out of which, 16 were Dialog work process, 6 Background work processes and 2 Spool.
I changed the instance profile through RZ10,
I made Dialog work process to 14 and Background work processes to 4 and added one(1) Critical Update and one(1) Non-Critical Update without changing the number of Spool work processes which were 2.
After i restart the instance i can see that there are 14 Dialogs 6 Background and 2 Spool.
I cannot see the Critical and Non-Critical Update which i added in the instance profile on both the Application Servers.
When i checked the value of parameter rdisp/wp_no_btc (background) the value is showing 4, but in sm50 the background work processes are 6.
Please can anyone tell me why the update work processes which i added are not shown in SM50 and,
why there are 6 background work processes showing in SM50 where as the current value for the background work process is showing 4 in RZ11.
Thanks in advance.
Regards,
Mudassir.Imtiaz

Hello All,
I changed the Operation Modes, it started showing the changes i made.
Thanks.
Regards,
Mudassir.Imtiaz

How many work processes are recommended by SAP for 16 GB RAM

How many work processes are recommended by SAP for 16 GB RAM ?

This is the calculation for determining the number of work process according to the available memory for the system.
- Number of dialog work processes = RAM/256 (min 2, max 18)
- Number of update work processes = RAM/768 (min 1, max 6)
- Number of update2 work processes = RAM/1024 (min 1, max 3)
- Number of batch work processes = RAM/1024 (min 2, max 3)
- Number of enqueue work processes = 1
- Number of spool work processes = 1
You can also refer the following link regarding memory management in SAP .
http://help.sap.com/saphelp_nw70/helpdata/EN/02/962817538111d1891b0000e8322f96/frameset.htm
It explains the calculation based on number of processors for the server.
Regards,
Jazz

SAP SRM UI (NXP) - Work Processes remain running

Background:
Shopping carts are being processed through the new SAP SRM UI (NXP). On occasion, dialog Work Processes are left in 'running' status even when there is nothing happening in the front end.
It occurs for many standard programs, but when checking the WP details, all are pointing to the same class
/IWFND/CL_MGW_RUNT_RCLNT_PRXY and function module /IWBEP/FM_MGW_CHANGESET.
The /IWFND/*_LOG transactions aren't showing any errors or warning
I haven't found any relevant SAP notes.
Environment:
Oracle 11 on AIX
SRMNXP01                       100        0002 SRM Add-on New Experience
GW_CORE                        190        0003 SAP GW CORE 190
IW_BEP                         200        0007 Backend Event Provider
IW_FND                         240        0003 SAP IW FND 240
SAP_ABA                        701        0013 Cross-Application Component
SAP_AP                         700        0029
SAP_BASIS                      701        0013 SAP Basis Component
SAP_BS_FND                     701        0013 SAP Business Suite Foundation
SAP_BW                         701        0013 SAP Business Warehouse
MDM_TECH                       710_700    0009 MDM_TECH 710 : Add-On Installation
PI_BASIS                       701        0013 Basis Plug-In
and some other bits and pieces (including SAP UI% and associated components)
QUESTION:
At the moment, I'm interested in a BASIS perspective; I want to ensure the platform (SRM_SERVER, GW_CORE, UI5, SRMNXP01, etc) is stable and functional. However, I'm not familiar with debugging / tuning / administrating the SAP Gateway (I still think SMG when I hear Gateway), so these may have fairly obvious answers to the right people, but ...
1) What or where should I be looking for further clues ? My first thoughts are around the available network connections.
2) Is there a transaction that provides real time monitoring of GW CORE ? I've found that the /IWBEP/VIEW_LOG and /IWFND/*_LOG transactions are only useful after the fact.
thanks

Hello Martin,
such hanging work processes can have many causes. Which AIX version do you have? Please take a look at the note
1873277 - Hanging Work processes on SAP Application Servers
if it can be relevant in your case.
Regards, Alwina

I attempted to perform the itunes update on two different PCs and itunes will no longer open and I received a message to reinstall itunes. The reinstall did not work and I now receive a Runtime error message (R6034) re: library loading incorrectly. Help?

I attempted to perform the itunes update on two different PCs. Itunes will no longer open and prompted me to reinstall itunes. The reinstall did not work after several attempts and I received an error: "Runtime error R6034. An application has made an attempt to load the C Runtime library incorrectly. Please contact the application's support team for more information." Has anyone else had this issue? How can I resolve it?

I've been having the same exact problem this morning, and from the looks of it a lot of other people are posting about this issue, so I don't know if it's maybe something wrong with the download but I'm just relieved that it seems to be that instead of a corruption issue with my windows installation. I'm just wondering how long this will take to be resolved.

Update multiple row for different values

hi,
Please provide me the sql query to update multiple row in a table with different values.
i need to change the old date to new date
we have only 3 column id,name,old date.now i need to update the old date to new date
ID name old date new date
1 A 2012-12-20 12/7/2012
2 B 2012-12-20 12/9/2012
3 c 2012-12-20 12/5/2012
thank you.

Here are two ways to do this. Thanks to ranit for the table creation script, which I adapted.create table test_x
as
select 1 id, 'A' name, to_date('2012-12-20','yyyy-mm-dd') old_date
from dual UNION ALL
select 2 id, 'B' name, to_date('2012-12-20','yyyy-mm-dd') old_date
from dual UNION ALL
SELECT 3 ID, 'C' NAME, TO_DATE('2012-12-20','yyyy-mm-dd') OLD_DATE
from dual;First method using MERGE:MERGE INTO TEST_X O
USING (
select 1 id, to_date('12/7/2012','mm/dd/yyyy') new_date
from dual UNION ALL
select 2 id, to_date('12/9/2012','mm/dd/yyyy') new_date
from dual UNION ALL
SELECT 3 ID, TO_DATE('12/5/2012','mm/dd/yyyy') NEW_DATE
FROM DUAL
) n
ON (O.ID = N.ID)
WHEN MATCHED THEN UPDATE SET OLD_DATE = n.NEW_DATE;Second method using UPDATE:UPDATE TEST_X SET OLD_DATE =
CASE WHEN ID = 1 THEN TO_DATE('12/7/2012','mm/dd/yyyy')
WHEN ID = 2 THEN TO_DATE('12/9/2012','mm/dd/yyyy')
WHEN ID = 3 THEN TO_DATE('12/5/2012','mm/dd/yyyy')
END
where id between 1 and 3;
You probably don't want to use these methods.*
You say the "user" will enter these values. Will he always enter exactly 3 values?
The "user" will enter values into a screen I suppose. What language is the user interface programmed in?

Updating multiple rows with different values

Hi!
I have a problem. I need to update more then 1000 rows with different values. How can I do it?
For exsample i have table:
id; color, date,
1 red
2 green
3 white
I need to update date field.
Update table
set date='01.02.03'
where id=1
Update table
set date='01.03.03'
where id=2
Maybe there is way how to update multiple rows at one query?
Sorry for my bad english.
Thanks!

Hi,
You can try this
UPDATE TABLE SET DATE = CASE
                    WHEN ID = 1 THEN TO_DATE('01-02-03','DD-MM-RR')
                    WHEN ID = 2 THEN TO_DATE('01-03-03','DD-MM-RR')
                    ENDcheers
VT

Ok, im new to numbers but i cant work this one out. In column A is an average of hours worked. I have 4 columns. A and B have different values. Column C is an average of hours worked. When column C is less then 8 i need column D to equal column a

Ok, im new to numbers but i cant work this one out. I have 4 columns. A and B have different values. Column C is an average of hours worked. When column C is less then 8 i need column D to equal column A. When column C is equal or greater then 8 i need column D to equal the sum of A and B.

Hi Lucas,
Try this:
Formula in D2 (and Fill Down) =IF(C2<8, A2,A2+B2)
The IF function follows the logic of if, then, else.
IF(this is true, then do this, else do that)
If it is raining, then stay at home, else hold a picnic .
Regards,
Ian.

Update Work Process - Different value in SM51 & TU02...which is correct?

Similar Messages

Maybe you are looking for