Updated and now can't log into iTunes. I see my apple id on iTunes page, but can't access account info or purchases

HELP!! I udpated all my itunes etc., and can access my Mac App Store, but can no longer access my itunes purchases or account info. I don't get an error message. But, when I log into iTunes and see my apple ID at top right hand corner, but then go to purchase history and account info, it just keeps taking me back to log in block. I'm not getting an error message, but can't pull up anything, but my name.

Ok.  Found something that said to shut down and hold the option, command, p, and r keys on restart.  Held them down for a few restarts and everything automatically signed in and works.  Woohoo!!!

Similar Messages

  • I have just had a system update a safari 5.1.7 a security update 2012-200 and a app update and now when i go into a site with flash it says i do not have adobe flash.  I have installed it but still no luck?  any help would be much appreciated  Cheers Dave

    I have just had a system update.  Safari 5.1.7, a security update 2012-200 and Remote app update and now when I go into a site with flash it says I do not have adobe flash.  I have installed it from the site but still no luck?  any help would be much appreciated  Cheers Dave

    Select Help ▹ Installed Plug-ins from the Safari menu bar. Besides the following, what plugins are listed?
    iPhotoPhotocast
    Java
    QuickTime
    WebKit built-in PDF

  • Installed Adobe dlm add-on and now Firfox will not open. I see the process starting in Task Manager but no window opens. Unistalled Firefox then re-installed but still no luck. HELP ME!

    ''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/793259]''
    I installed Adobe dlm add-on and now Firefox will not open. I see the process starting in Task Manager but no window opens. Unistalled Firefox then re-installed but still no luck. HELP ME! I do not want to use IE! I presume it has something to do with Adobe DLM as ever since then it is not working.

    I had this problem for a couple weeks as well and it was extremely frustrating considering we use firefox for all our company tasks. Here is the solution:
    First of all if you have no bookmarks you want to save, then go directly to step 7. If you want to save your bookmarks first, then follow these steps.
    1. Shut down the computer
    2. Reboot and open firefox
    3. Go to Task Manager, right click firefox.exe, and click END PROCESS TREE
    4. WAIT 30 SECONDS! Then Double-click the shortcut to try and open firefox again
    5.Repeat steps 3 and 4 until firefox finally opens (trust me, eventually it will)
    6. Once it finally opens, backup your bookmarks,
    7. Download a copy of firefox from there website
    8. Uninstall from programs menu and make sure to check the box REMOVE ALL COMPONENTS
    9. install the new copy and BOOM! it works
    If it doesn't work, you're an idiot. If you don't want to reinstall firefox, then you're out of luck. Good Luck!

  • Just changed my apple id password  and now I cant log into facetime

    I just changed my apple id password  and now I can't log into facetime, it doesnt accept my new password.

    Hey there caribbeanbeach,
    It sounds like you are not able to log into FaceTime after changing your Apple ID password. I would use these troubleshooting steps from the following article to help you troubleshoot the issue:
    FaceTime for Mac: Troubleshooting FaceTime
    http://support.apple.com/kb/ts4185
    Activating FaceTime for Mac
    Use your Apple ID to register and use FaceTime. FaceTime registration validates your Apple ID and email address for use with FaceTime.
    If you are unable to activate FaceTime, try the following:
    Verify that you are using a valid Apple ID at appleid.apple.com. You can also create an Apple ID or reset your password from this website.
    Check that your email address is verified in FaceTime > Preferences.If FaceTime > Preferences shows your email status as "verifying," follow the instructions in the verification email that was sent to complete the process.
    Toggle FaceTime off and on in FaceTime > Preferences.
    If still unable to Sign In follow the instructions in FaceTime, Game Center, Messages on OS X: Troubleshooting Sign in
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • TS1424 i have just done the latest itunes update and now have the following message come up when i try to open itunes

    i have just installed the latest update and the following message has come up.  Text box - Unable to locate component.  Message - the application failed to start because MSVCR80.dll was not found.  Re-installing the application may fix the problem.
    I have tried reinstalling  and it has not helped. 
    I have gone to uninstall what ever is installed on the computer but cannot find itunes in the program list but do not want to just delete all apple applications with out knowing what they are.  So, how do i delete the existing itunes program on my compouter??
    I am also hoping that i will be able to do a restor eform the cloud once i get this sorted

    Hello, fletch72. 
    Thank you for the question.  I see you have uninstalled, reinstalled and the error is persisting.  Try one more time uninstalling all components of iTunes in the order specified of the article below.  These steps must be processed in the order specified or the error will persist.  Once this is done attempt to install iTunes again.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/ht1923
    If the issue persists, you will need to process the steps in the article below for each component and reinstall.
    "The feature you are trying to use is on a network resource that is unavailable" alert when removing Apple software in Windows
    http://support.apple.com/kb/TS3704
    Cheers,
    Jason H.

  • So, i changed my apple password. And now when i log into my iMessage it won't allow my new password, or my old one. How do i figure this out?

    Can someone help me with my imessage. I changed my password and now it's not allowing my new password, or my old one.

    Did you purchase Apple Care? If you did, you still have access to Apple Support.  If not, go to your Apple Store and let them help you get it set up correctly.  I'm sure it's something simple we're missing.  Good Luck. 
    Do remember one thing.  iMessage on iPad only works with other iOS devices.  This means you can only text to people who:
    1.  Have an iPhone, iPad, or iPod Touch
    2.  And they have upgraded to iOS 5 or higher

  • Can I log into Game Center with my Apple ID on another phone

    I'm tryin too use another iPhone too log into Gamecenter but I can't figure out how too log out the id that's in it now

    Change here: Settings>Game Center.

  • I got Mavericks and now clicking my mouse doesn't work in many apple programs, is there anything I can do to fix this, and is Apple working on a fix for it?

    Clicking buttons doesn't work in calendar, preview, or updates, and it also doesn't work in fullscreen videos viewed on youtube.  Right click seems to work like a left click, but not for everything.  Clicking the mouse works in other programs.

    1. Reset PRAM.  http://support.apple.com/kb/PH4405
    2. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".

  • Updated my computer last night with the latest update.  Now I cannot log into any of my email accounts-what's up

    Updated my Air last night:   OS X 10.8.2
    Now NONE of my email accounts will accept passwords, not gmail or icloud or bellsouth(which I have recently started getting switched over to icloud). 
    Most of the "help" here is aimed at the really computer literate--dumb it down for me please.
    -Don't make the response too technical--it only frustrates me.

    Have you tried the steps listed in this article:  iOS: Troubleshooting Wi-Fi networks and connections ?

  • HT201412 ok i did the new update and now my phone wont even start up! the apple logo comes up then the screen will flash and the phone will shut off. any ideas?

    as listed in the title, my phone just flashes on me no start up just flashes from the apple logo to shutting off and back and forth i did the update this afternoon (9-26-2012) and it still wont start up!!!

    Something in your backup may be corrupt. Try wiping it and setting it up as a new device, then sync your apps, data and media back to it from iTunes. DO NOT resotre from your backup. If the problem is contained in the backup, it will bring it right back again if you restore.

  • I have done the softer update and now this system request a connection with a meanie HD and I connector for iTunes I don't understand why ?

    I have done the softer update and now this system request a connection with a Mini  HDMI  connector for iTunes I don't understand why ?
    DO I HAVE TO HAVE THE MINI HDMI CONNECTOR TO COMPLETE THE SOFTER UPDATE PROCESS ?

    You might be seeing a Micro USB cable (Not HDMI) that is because your Apple Tv is in Recovery Mode due to some reason and it needs to be Restored by connecting it to iTunes on your Computer. So if you have a Micro USB cable ( which comes with Android Smart Phones ) then try to connect your Apple Tv to your computer using the same and with the help of iTunes Restore your Apple Tv to Factory Settings. Go through the below Apple Support kb which says " If your Apple TV still does not respond or if you were unable to follow the above steps "
    http://support.apple.com/kb/ht4367

  • Created three new users without Apple IDs and they can't log into either of my Macbook Pro or Mac Mini running Mountain Lion.

    I have created three new users without Apple IDs and they can't log into either of my Macbook Pro or Mac Mini running Mountain Lion.  These accounts are for my kids and originally were setup with parental controls and time constraints.  Thinking this was the problem I removed the time constraints, removed the parental controls, deleted and re-added them, and made them standard users.  I have reinstalled, used disk utility to repair permissions, and made them admins.   Any help is appreciated.

    Users don't need Apple ID's. That's not the issue. Have you tried repairing permissions their accounts?
    http://osxdaily.com/2011/11/15/repair-user-permissions-in-mac-os-x-lion/
    Repairing User Permissions in OS X Lion
    You’ll need to reboot to perform this, and then use the same resetpassword utility that is used to change passwords in Lion, but instead choosing a hidden option.
    When you use the Disk Utility app and Repair Permissions — it doesn’t actually repair the permission settings on folders and files in your Home folder where your documents and personal applications reside.
    In Lion, there is an additional Repair Permissions application utility hidden away. This tool is located inside boot Repair Utilities. Here’s how to access it.
    Restart Lion and hold down the Command and R keys.    You will boot into the Repair Utilities screen. On top, in the Menu Bar click the Utilities item then select Terminal.
    In the Terminal window, type resetpassword and hit Return.
    The Password reset utility launches, but you’re not going to reset the password. Instead, click on the icon for your Mac’s hard drive at the top. From the drop-down below it, select the user account where you are having issues.
    At the bottom of the window, you’ll see an area labeled ‘Reset Home Directory Permissions and ACLs’. Click the Reset button there.
    The reset process takes a couple of minutes. When it’s done, quit the programs you’ve opened and restart your Mac. Notice that ‘Spotlight’ starts re-indexing immediately.

  • EPM 11.1 Install Problems - Apps not in SS/Can't Log into Wkspce/Install ?

    Hi all...
    Was attempting to do an install w/ separate tablespaces in Oracle. Read install doc and saw this note
    "To use a different database for each product, perform the “Configure Database” task separately for each product.
    In some cases you might want to configure separate databases for products."
    Guess I may have read it wrong but basically, tried running config for an entire app one at a time vs. just running the config database and then performing the remainder of the confg tasks for all apps. Validates okay (except Studio -- connection string doesn't seem to be working although looks okay in the .properties file -- but can fix that later), however now I have the following problems:
    Planning, Reporting and Analysis apps are not showing up in Shared Services nor are there any roles associated with these apps so I can't provision a user for access.
    Can't log into Workspace to see if my apps are are there -- tried using "admin" "password" but get error message "You must supply a valid user name and password to log onto the system". Which makes sense -- there are no roles for these apps and, therefore no users w/ access to these...
    So, first question -- When Oracle says to run the Configure Database task separately for each product, does that mean I was supposed to select only this specific task for each product and then run the config for all products w/ the "configure database" deselected?
    Next question -- Any way to force the app to register to Shared Services? The apps that are not showing in Shared Services do not have any apparent tasks for doing this and some only have a choice between configure database and deploy application server -- don't really want to chose either of these as would think it would get really, really messy (that is, would it deploy a second app server or update the current one?)
    Trying to avoid uninstalling but that may be the only option. However, before I do that wanted to make sure I understood the Oracle note about "Configure Database" (see question above).
    Any thoughts welcome.
    KJ

    So, John...
    Good info on the the EPM Workspace issue. After installing the R&A Migration package, BI Plus and roles were available in Shared Services and I was able to log into Worksapce with both my previously non-working Admin/password account and a test user account. And, as an added bonus, the previous Oracle connection string error I was having w/ Essbase Studio disappeared!
    Unfortunately, Planning and EPMA did not get a boost from that fix so, am currently in the process of uninstalling, which as you noted was not all the clean at all -- actually didn't see any difference after the uninstall from the install, and installing.
    Install appears to be laying down the files (manually deleted the Hyperion directory...) okay. Will have to see how it goes from here. Think I will try the route of doing all the configure database tasks for all the apps first (to keep them in separate tablespaces and instances) and then doing the config for all the apps at one time.
    BTW... Is there a "published" configuration sequence? I read the "Start here" and Install doc from cover to cover before starting the install and config and did not see any specific notes on the order of configuration... Just curious as I have seen several notes that allude to this being in the install doc. Am I just totally missing something?
    KJ

  • Had to change my apple ID/password and now I cannot sign into iMessage on my ipad2

    I changed my Apple password and now I cannot log into iMessage.  It just flips back to log-in screen & says it cannot verify & that I need to log back into my apple account.  Help?

    Go to Settings > Store, touch your Apple ID, log out, then back in with the updated information.  Then go to Settings > iCLoud and verify the correct address.  Then do the same in Settings > Messages.......Once all all correct, you should be good to go......

  • I just downloaded the Java software update and now certain programs aren't loading that use Java?

    So I downloaded the new softeware update and now my programs that use Java won't load. Does anyone know what I can do.

    Due to the extreme unpredictability of the Flashback Trojan, that was constantly changing (and a new variant that's been detected and seems to be worse), Apple decided to play it safe just in case the revised Java code was still vulnerable. So, Java is disabled by default for applets and must be manually enabled as needed (with the warning about possible vulnerability).
    So, head on over to Java Preferences, in Utilities, and enable the thing as needed. Disable when no longer in use for security's sake. BTW, if you enable but don't use Java in awhile, it is configured to self-disable for the same reason.

Maybe you are looking for