Updated Bridge and PS CC, added Output module - Bridge now slow

Trying to figure out why Bridge is lagging. Prior to the updates I ran a week ago, everything was fine. Now that I have 6.1.0.116 x64 - I click and wait. And wait some more. And wait and then finally, about 10-15 seconds later, Bridge comes back to life. I Googled it and found a discussion here about it, however, I followed the removing libraries chatter and no change.
Getting extremely frustrated as I count on Bridge for so much. Has anyone else experienced lag since they updated?
Running it on a brand new machine, Win 8.1, 16G RAM, Intel Core i7-4790, 1 TB hard drive.... No other changes were made to cause the lag in Bridge.
Any ideas would be well appreciated.
Thanks.

Any ideas?

Similar Messages

Bridge cc will not open on pc after adding output module

I just added the output module to my bridge CC and now it won't open it was working fine before. I have uninstalled and reinstalled. I have restarted the computer. I have no idea what to do now.

For installing it please download the package as listed in the below mentioned link and follow the install instructions.
http://helpx.adobe.com/bridge/kb/install-output-module-bridge-cc.html
Make sure that you have the most recent version of Bridge CC(6.0.1) installed.
Regards,
Ashutosh

Output Module (Bridge CC) not working on Mac

As suggested here
http://helpx.adobe.com/bridge/kb/install-output-module-bridge-cc.html
I downloaded and tried to install the Bridge CC Output Module. I could not find the "Bridge CC Extensions" folder only "Bridge CC"
I can see the output name inside Bridge when I try to install it but nothing happens when I try to click it, it's just greyed out
I using Bridge 6.0.0.151
On OS X 10.8.4

Thank ti Sinkromone.
But adobe did this on purpose.
From the Birdge product page.
Features not available in Bridge CC
Unavailable in Adobe Bridge CC
The following features are no longer available in this version of Adobe Bridge.
Adobe Output Module
Export Panel
Compact Mode
3D File format thumbnails and previews
Synchronized window
Adobe Output Module
The Adobe Output Module is now available as a separate module that can be installed after you've installed Adobe Bridge. For detailed instructions see, Install Adobe Output Module for Bridge CC.The functionality to create contact sheets, PDFs, and web galleries is also available in Adobe Photoshop and Adobe Lightroom, which are included in your Creative Cloud subscription.
To create contact sheets and PDFs, see the following:
Print a Contact Sheet in Lightroom.
Contact sheets and PDF Presentations in Photoshop
To create web galleries using Adobe Lightroom, see Creating web galleries.
See on the link below.
Bridge Help | What's new in Adobe Bridge CC
So it may still work for a while but Adobe is probably going to withdraw it from the installation pckage.
Philby

Hi there, I cannot open bridge and I get this warning, "Adobe Bridge Cannot be Opened because of a problem. Check with the developer to make sure Adobe Bridge CC works with this version of Mac OS X. You may need to reinstall any updates for this applicati

Hi there, I cannot open bridge and I get this warning, "Adobe Bridge Cannot be Opened because of a problem. Check with the developer to make sure Adobe Bridge CC works with this version of Mac OS X. You may need to reinstall any updates for this application and Mac OS X" although bridge has been running on my Mac for over a yera. I have installed all current updates for Mac and reinstalled Bridge again from CC and still get the same issue? Any advice?

Would you please provide details about your setup?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

HT5654 iTunes auto update downloaded and installed on 28/01/2014. iTunes now won't launch and error message states file MSVCR80.dll is missing. Tried uninstalling and downloading/installing again to no avail. Any clues?

iTunes auto-update dowloaded and installed on 28/01/2014. iTunes now won't launch and error message states file MSVCR80.dll is missing. Tried unistalling and downloading/installing again to no avail. Any clues?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99269)

Recently updated iMac and macbook pro to mountain lion. Now mouse and track pad operate backwards i.e. scroll up and page scrolls down. how do you fix this?

recently updated iMac and macbook pro to mountain lion. Now mouse and track pad operate backwards i.e. scroll up and page scrolls down. how do you fix this?

System Preferences > Mouse -- deselect "Scroll direction: natural." Do the same for the trackpad > Scroll & Zoom preference.

Adobe Bridge CC.. No Output Module

So here's the deal;
I just downloaded a trial for Bridge CC in order to help me create a contact sheet earlier this morning. I've been struggling since to work it because, which I recently learned, theres no 'OUTPUT MODULE' with the Bridge CC program. I have downloaded the Output Module but have no idea as to how to copy or transfer that into the Bridge CC folder(s).
Please someone help!!
Thanks!

After installed the Adobe Output Module, and followed instruction, managed to get the 'output' tab appeared on the workspace, but it has empty function features which I can't use to create PDF or web page at all. Please help.

Setting format and format options in Output module settings for render queue item

Hello,
I am unable to set the "Format" and "Format options" for video in output module settings programatically using After effects apis.
I referred the after effects cs3 sdk guide for the apis.
I find apis for all other options in the "outputmodule settings " like :
AEGP_SetEmbedOptions
AEGP_SetOutputChannels
AEGP_SetStretchInfo
AEGP_SetSoundFormatInfo
But there is no api listed for setting the options available in the "Format" tab and "Format options" tab.
The "Format" tab and "Format options" tab is available in the dialog that opens when user clicks on the Output module settings for the render queue item.
The format tab when clicked shows a drop down list with aff different formats. By default "Video for Windows" is set.
The drop down list contains following format options
Adobe Clip Notes
Adobe Flash video
Quicktime movie
Video for Windows
I need to be able to set the "Quicktime movie" option in the Format tab programmatically and then set the compression type as "Animation" in the compression settings programatically using the api functions available in AE CS3 SDK
Please suggest the suitable api to do so.
I need to write my own plugin to export to Quicktime movie using the after effects apis.
I follow below steps to do so.
1. AEGP_InsertMenuCommand and add export option to AE with my own plugin name
2. In the command hook, select active item using AEGP_GetActiveItem
3. Add it to render queue
4. Set the output module settings for 0 th output module using
suites.OutputModuleSuite1()
5. Use different functions from suites.OutputModuleSuite1() to set the output module settings like EmbedOptions,StrechInfo etc.
6. Till this step, I am doing it right. But I am not able to find any api for setting Format options using suites.OutputModuleSuite1()
I also checked all other suites available for setting FormatOptions but no luck.
Please help.
Thanks,
-Namita

Hi Namita,
I am experiencing the same problem.
I am using AE CC SDK, and I am unable to change the outputmodule format to any of the other movie format types (mov, mpg, flv, etc.).
It is always set to "avi"
I even compiled and ran the Queuebert example in the SDK, and there I get the same problem: the path extension is always left on ".avi"
Does anyone know how to change this?

Is it necessary to update scope_info and scope_config when adding columns to a table in a provisioned database?

I followed the example provided in
https://jtabadero.wordpress.com/2011/04/13/modifying-sync-framework-scope-definition-part-3-workarounds-addingremoving-columns/ to add columns to a table in a provisioned database. The sample code replaces the stored procedures triggered when the
table is updated with new stored procedures which include the additional columns
However, the sample does not update scope_config. When I am finished, the new columns do not appear in the scope config. Looking at the SQL code it is immediately obvious why. Here is an excerpt from the beginning of the query
DROP PROCEDURE [PATIENT_insertmetadata];
DROP PROCEDURE [PATIENT_updatemetadata];
DROP PROCEDURE [PATIENT_deletemetadata];
-- BEGIN Enable Snapshot Isolation on Database 'PatScan' if needed
IF EXISTS (SELECT NAME FROM sys.databases where NAME = N'PatScan' AND [snapshot_isolation_state] = 0)
BEGIN
ALTER DATABASE [PatScan] SET ALLOW_SNAPSHOT_ISOLATION ON
END
GO
-- END Enable Snapshot Isolation on Database 'PatScan' if needed
-- BEGIN Create Scope Info Table named [scope_info]
IF NOT EXISTS (SELECT t.name FROM sys.tables t JOIN sys.schemas s ON s.schema_id = t.schema_id WHERE t.name = N'scope_info' AND s.name = N'dbo')
BEGIN
CREATE TABLE [scope_info] ([scope_local_id] int IDENTITY(1,1) NOT NULL, [scope_id] uniqueidentifier DEFAULT NEWID() NOT NULL, [sync_scope_name] nvarchar(100) NOT NULL, [scope_sync_knowledge] varbinary(max) NULL, [scope_tombstone_cleanup_knowledge] varbinary(max)
NULL, [scope_timestamp] timestamp NULL, [scope_config_id] uniqueidentifier NULL, [scope_restore_count] int DEFAULT 0 NOT NULL, [scope_user_comment] nvarchar(max) NULL)
ALTER TABLE [scope_info] ADD CONSTRAINT [PK_scope_info] PRIMARY KEY ([sync_scope_name])
END
GO
-- END Create Scope Info Table named [scope_info]
-- BEGIN Create Scope Config Table named [scope_config]
IF NOT EXISTS (SELECT t.name FROM sys.tables t JOIN sys.schemas s ON s.schema_id = t.schema_id WHERE t.name = N'scope_config' AND s.name = N'dbo')
BEGIN
CREATE TABLE [scope_config] ([config_id] uniqueidentifier NOT NULL, [config_data] xml NOT NULL, [scope_status] char NULL)
ALTER TABLE [scope_config] ADD CONSTRAINT [PK_scope_config] PRIMARY KEY ([config_id])
END
GO
-- END Create Scope Config Table named [scope_config]
In an already provisioned database, the scope_info and scope_config tables already exist. Hence the portions of the script to create the scope_info and scope_config tables are skipped. I tried modifying the query to drop these tables. When
I do so, ne tables are created but they only define the modified table.
Is it necessary to update scope_info and scope_config? Are there are side effects (such as deprovisioning) if I drop and then recreate these tables? Can I just update the existing scope_config, replacing the portion of the XML which defines the table
being modified? Do I have to make changes in scope_info?
Thanks
Howard Weiss
Howard P. Weiss

I followed the example provided in
https://jtabadero.wordpress.com/2011/04/13/modifying-sync-framework-scope-definition-part-3-workarounds-addingremoving-columns/ to add columns to a table in a provisioned database. The sample code replaces the stored procedures triggered when the
table is updated with new stored procedures which include the additional columns
However, the sample does not update scope_config. When I am finished, the new columns do not appear in the scope config. Looking at the SQL code it is immediately obvious why. Here is an excerpt from the beginning of the query
DROP PROCEDURE [PATIENT_insertmetadata];
DROP PROCEDURE [PATIENT_updatemetadata];
DROP PROCEDURE [PATIENT_deletemetadata];
-- BEGIN Enable Snapshot Isolation on Database 'PatScan' if needed
IF EXISTS (SELECT NAME FROM sys.databases where NAME = N'PatScan' AND [snapshot_isolation_state] = 0)
BEGIN
ALTER DATABASE [PatScan] SET ALLOW_SNAPSHOT_ISOLATION ON
END
GO
-- END Enable Snapshot Isolation on Database 'PatScan' if needed
-- BEGIN Create Scope Info Table named [scope_info]
IF NOT EXISTS (SELECT t.name FROM sys.tables t JOIN sys.schemas s ON s.schema_id = t.schema_id WHERE t.name = N'scope_info' AND s.name = N'dbo')
BEGIN
CREATE TABLE [scope_info] ([scope_local_id] int IDENTITY(1,1) NOT NULL, [scope_id] uniqueidentifier DEFAULT NEWID() NOT NULL, [sync_scope_name] nvarchar(100) NOT NULL, [scope_sync_knowledge] varbinary(max) NULL, [scope_tombstone_cleanup_knowledge] varbinary(max)
NULL, [scope_timestamp] timestamp NULL, [scope_config_id] uniqueidentifier NULL, [scope_restore_count] int DEFAULT 0 NOT NULL, [scope_user_comment] nvarchar(max) NULL)
ALTER TABLE [scope_info] ADD CONSTRAINT [PK_scope_info] PRIMARY KEY ([sync_scope_name])
END
GO
-- END Create Scope Info Table named [scope_info]
-- BEGIN Create Scope Config Table named [scope_config]
IF NOT EXISTS (SELECT t.name FROM sys.tables t JOIN sys.schemas s ON s.schema_id = t.schema_id WHERE t.name = N'scope_config' AND s.name = N'dbo')
BEGIN
CREATE TABLE [scope_config] ([config_id] uniqueidentifier NOT NULL, [config_data] xml NOT NULL, [scope_status] char NULL)
ALTER TABLE [scope_config] ADD CONSTRAINT [PK_scope_config] PRIMARY KEY ([config_id])
END
GO
-- END Create Scope Config Table named [scope_config]
In an already provisioned database, the scope_info and scope_config tables already exist. Hence the portions of the script to create the scope_info and scope_config tables are skipped. I tried modifying the query to drop these tables. When
I do so, ne tables are created but they only define the modified table.
Is it necessary to update scope_info and scope_config? Are there are side effects (such as deprovisioning) if I drop and then recreate these tables? Can I just update the existing scope_config, replacing the portion of the XML which defines the table
being modified? Do I have to make changes in scope_info?
Thanks
Howard Weiss
Howard P. Weiss

CS6 Bridge and Yosemite.... Bridges Crashes

I updated to Yosemite last night and everything runs fine except CS6 Bridge. It crashes when a new folder is opened. When I open the hard drive where the image folder is Bridge does great loading that content. Then when I click on a new folder, it will start its process, 5 or 6 images in it crashes...
Any thoughts on how to fix this? Thank you in advance

Hi Pixelagogo,
I generally am using Bridge-CC so I quit that and tested my Bridge-CS6 and I had no issue.
Some things to try:
1) The cache may be corrupted. Once you open your folder go to Bridge Preferences -> Cache -> Purge Cache.
If that doesn't work than:
2) Delete your Prefs. Do do this, quit Bridge (if it's already running), and double-click on the Bridge application while holding the Shift-Option-Control keys. You should get a message asking if you want to delete your Prefs, click Yes.
If that doesn't solve the problem,
3) try deleting Bridge and reinstalling.
Good luck,
Gary

I was offered an itunes update yesterday and said yes to install it. Now it won't open.

I was offered an iTunes update yesterday and said yes to install it. It seems to have installed it. Now it won't open.

Download and Install Java: http://support.apple.com/kb/DL1421

Bridge and AP, using a 1200 series bridge.

Hi Folks,
I would like to bridge from an AP1131 to an AP1262 using the 5.8 ghz radios then allow access via the 2.4 ghz radio on the 1260. I will use a directional antenna for the 1260 bridge to optimize performance. The 5ghz radio will only be used for bridging. The ap 1131 is an AP right now but only offers access on 2.4 ghz. There are only a few clients.
The 1130 will be sitting in a window with the ant5160 outdoor mounted and pointed at it from ~200 feet away.
Does anyone see an issue? Maybe suggest a better parts list. I was originally thinking of using a 1310 as the bridge and a 1140 as the AP but that configuration is not as flexiable and the 1310 part is very old... I understand I will not get N throughput since the 1130 is not N capable, it is already installed. I need autonomous AP and can upgrade to 1140 in the future to improve performance.
I plan to upgrade to WCS next year, does it support this type of configuration? I am assuming that IOS does...
So here are the part numbers that I plan to use.
AIR-AP1262N-A-K9
AIR-AP1131AG-A-K9
Directional 5.8 ghz
AIR-ANT5160NP-R=
Omni 2.4 ghz
AIR-ANT2430V-R=
Thanks for any help,
Joe

Joe,
I am a little confused by your post but can offer some answers.
First of all I assume your intending to purt the external antennas on the 1262 not the 1130.
In terms of configuration you will need to configure 1 of the 802.11a radios in either the 1130 or the 1262 as a station role of root and the other in station role of non-root, that will enable them to connect to each other and bridge, then you can configure the 802.11b/g radios any way you choose and everythign should work as I think your intending,
over this distance you may get decent speeds. I'd be more inclined to use 1262's on each side with appropriate antennas; depending on what exactly your trying to accomplish on each side as far as coverage goes..
In terms of moving to WCS and lightweight mode it really doesn't support this configuration.
HTH

Bridge Help | Create web galleries and PDFs with Adobe Output Module

This question was posted in response to the following article: http://helpx.adobe.com/bridge/using/create-web-galleries-pdfs-adobe.html

Plug-ins that failed to load:
It seems to me that something is wrong with your install. Maybe you did clone a former mac to install on this one? or copies old stuff to the new one. Don't know, it seems easy and quick but I prefer always a new install using a new computer or switching to a new system upgrade.
Lightning effects shows to be 32 bit while I think to know that Photoshop CS5 and CS5.5 are both 64 bit, however Bridge was turned to 64 bit in the CS6 version but that should not mater for you to use both applications from the same install disk (or download?)
And variations is something I tried to find in CS6 but can't find it there. I had long forgotten this feature that presented different previews and you could switch to color corrections and brightness (not sure) while looking at the result in the previews.
So I think you have some old material residing on your system. I would advice you to back up all custom settings (actions, tools, workspaces etc. and keywords in Bridge) Then do a search for the Adobe Cleaner tool :
http://www.adobe.com/support/contact/cscleanertool.html?promoid=GYTAU
(don't know this links work for you but you can find it easy with google).
Read the instructions carefully and follow this using the official uninstaller that came with PS (see application folder). Also be sure to have your serial number and AdobeID present and while an activation of PS is for the computer maybe for security first deactivate before uninstall.

Output module, Bridge Web Galleries

When I click the preview in browser button, Fireworks opens with a page of code, instead of seeing a preview in Safari. Safari is my default browser. How to I change the settings in bridge so I can actually see what the web gallery will look like? I miss the refresh previewbutton of CS5!

It sounds like your html files are assigned to fireworks instead of safari. Open your file browser (windows explorer or mac equivelent) find an html file and look at it properties. In windows this is where you can change the app that is the default. I am not sure how on a MAC, but hopefully it will jog your memory or someone else will answer.

Create web galleries and PDFs with Adobe Output Module

This question was posted in response to the following article: http://help.adobe.com/en_US/creativesuite/cs/using/WSe851854fd1e0856a-4b08a77612477f69f15- 8000.html

HOW DO I CREATE A GALLERY IN DREAMWEAVER CS5!?
This is the Bridge Forum and AOM creates its own gallery, maybe you better drop this question in the dedicated Dream Weaver Forum:
http://forums.adobe.com/community/dreamweaver
(and there is no need for SHOUTING...)

Updated Bridge and PS CC, added Output module - Bridge now slow

Similar Messages

Maybe you are looking for