Updated camera raw / DNG converter for CS4 compatible with D800 NEF?

I have just bought a D800 but cannot convert my NEF files into DNG. I have Photoshop CS4 with latest camera raw updates available. I see in the forum that an update is available in the lab but only for CS5. Shall we expect an update for CS4 as well? Thanks

No. There will be no more ACR updates for Photoshop CS4. That version is no longer supported. You can download the DNG converter and convert your images to digital negative files that can then be opened in the ACR that you already have. Since your camera is so new I'm not sure if it's even supported by the DNG converter. You might have to wait for the next update.
Your other alternative would be to upgrade your Photoshop. Of course, that will cost a little money. But not nearly as much as your new camera did.

Similar Messages

How do I update camera raw plugin on photoshop cs4 for mac?

I've just reinstalled PS cs4 on a new macbook pro - my camera raw files from a canon 5d mark 2 are not being recognized...
I found out that I need to update the camera raw plugin to version 5.2. I downloaded the plug in and the computer said it successfully installed the plug in
but the camera raw files still aren't readable.... Any ideas?

This the manual installer for camera raw 5.7
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 5.7 update
The profiles are installed by double clicking on the downloaded Camera_Raw_5.7 dmg and double clicking on the cameraprofiles.mpkg
Install the camera raw.plugin by going to (Macintosh hard drive)/Library/Application Support/Adobe/Plug-Ins/CS4/File Formats and dragging the existing camera raw plugin to the Trash.
Then drag the new camera raw plugin from the dmg to the same folder.

Camera Raw/DNG Converter 3.5 Update Posted

Windows:
http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Windows
Macintosh:
http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Macintosh
This new version of the Camera Raw plug-in replaces the original Camera Raw plug-in that was installed with Adobe Photoshop CS2 and Adobe Photoshop Elements 3.0 and 4.0 software. Visit the Camera Raw page for a complete list of supported cameras.
Important notice:
Read the installation instructions carefully. Incorrect installation will prevent Adobe Bridge and Adobe Camera Raw 3.5 from reading raw images correctly.
Support for the following cameras has been added in this update.
Kodak EasyShare P712
Nikon D2Xs
Panasonic DMC-FZ50
Panasonic DMC-L1
Sony A100

To answer the most likely questions:
No, this update does not support the Nikon D80 nor the Canon 400D [Rebel XTi] yet. We receieved these cameras too late in our development cycle to make the cut for this release. We understand there are a lot of users now getting these cameras who want support as soon as possible.
There are also a bunch of other cameras models likely to be announced at Photokina which will want to support as soon as possible.
Because of this demand, we are planning to make the time gap between the ACR 3.5 and 3.6 releases shorter than usual, so you will not have to wait all that long for support.
Also, we are nearing completion of the Beta 4 release of Lightroom. This will be released fairly soon (before the release of ACR 3.6). Lightroom is currently in a free public beta program:
http://labs.adobe.com/technologies/lightroom
Beta 4 of Lightroom will have preliminary support for both the Nikon D80 and the Canon 400D.
So in the time period the Beta 4 release of Lightroom (soon) and ACR 3.6 (shorter cycle than usual), you wil be able to processor your Nikon D80 and Canon 400D files using Lightroom Beta 4. You will also have the option of using the Beta 4 build Lightroom to convert the Nikon D80 and Canon 400D raw files into DNG format, which can then be used with ACR versions as old as 2.4.

Reinstalling Camera RAW plug-in for CS4 on my new Mac - help!

Hi folks,
This is as much a Mac question as a Photoshop question, and I would appreciate any help.
I just got a new Mac, and when I transferred everything from my old computer to the new one, something didn't move over from CS4, such that whenever I opened a TIF file, it would tell me that there was a missing component, which would then force quit the program. So I reinstalled CS4, but when I re-downloaded the Camera RAW plug-in (5.7), my Mac won't let me install it, saying that it only allows downloads from the App store (referring to the .mpkg file). In the security preferences, it says "download anyway," but then it repeats the message. The option to allow all sorts of downloads remains gray, such that I can't even select it.
Any advice would be very much appreciated, either in terms of the Mac or the Photoshop! Thanks!
Claudio

This should be an automated installer for camera raw 5.7:
Adobe - Photoshop : For Macintosh : Camera Raw 5.7 update
The camera raw plugin 5.7 for a manual install should go in:
Mac Hard Drive: Library/Application Support/Adobe/Plug-Ins/CS4/File Formats
(click on the image below to enlarge)
Be sure to move the old camera raw plugin to the trash before copying the new one to the File Formats folder
Also, install the camera profiles.
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 5.7 update

Still Looking for Camera Raw Plug-In for CS4

I have Adobe CS4, and, after extensive searching, cannot find the correct version of the Camera Raw plug-in for my Mac (OS 10.6.8). I just did successfully download and install the DNG converter 8.1 for Macs. Today I downloaded version 5.4 for mac then it told me to quit before proceeding with the installation, that there was a newer version available. Adobe states my camera's minimum requirement for Camera Raw is version 5.4.
file://localhost/Users/Cea/Desktop/Adobe%20Camera%20Raw%20cannot%20install%20message.tiff
Can anyone guide me to the right one? Camera Raw only been a dream until now. I finally have a great DSLR that supports raw, I've been playing around with it in iPhoto, but it's now time for me to take this to the next level.
Thanks very much.

Ask such specific questions on the Camera RAW or Photoshop forums and include info about your camera. If it's a newer model, this may ber perfectly normal and the files may require you to upgrade to CS5.1 so you can use the latest versions of Camera RAW or use the standalone DNG converter...
Mylenium

Update camera raw in cs5 for nikkon d600

update camera raw cs5 for a nikkon D600?

Nikon D600 was fully supported when Adobe Camera Raw 7.3 launch however there was preliminary support for Nikon D600 in Camera Raw 7.2 and
Photoshop CS5 does support Adobe Camera raw files from 6.0 to 6.7 only.
For more information please check.
Camera Raw plug-in | Supported cameras
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
Camera Raw-compatible Adobe applications
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html

Is the version of Camera Raw 6.4 currently available compatible with CS4?

I have Photoshop CS4, and have tried downloading the version of Camera Raw 6.4, but it won't install. I'm guessing it is compatible only with CS5. Is that correct, and if so, will it be available as an update for CS4 sometime in the future?

The best thing would be to upgrade to CS5 if you can afford it and it runs on your computer or maybe get Lightroom which upgrades for cheaper but has the same adjustments, but the same controls are available for DNGs as ORFs in ACR but you trade backward compatibility in Adobe products for not being able to open the DNG in Olympus-only products, which you may or may not care about in the future. You can decide to embed the original RAW data into the DNG which makes it about twice as big and this allows you to extract the ORF later with the DNG converter if you want to work on a particular ORF is some different software. Of course decades from now, there may not be a DNG converter to extract the data with, and saving a distinct ORF would give more flexibility if you care about such things.

Camera raw 7.3 for CS4 - Canon 6d

Hi,
Where can I download camera raw 7.3 update for CS4 to read CR2 files from Canon 6d?
Thanks.
Marko

Camera Raw version 7.x, including 7.3 of course, does NOT run in CS4.
Forget about that, you will never be able to open raw files from that camera directly in CS4, as it has been discontinued for years and there will be no further updates to it.
Your choices are to upgrade to at least CS6, or to download the free, stand-alone Adobe DNG Converter 8.1, install it, launch it and convert your CR2 raw files to raw DNG files that you can then open in CS4.
Note that the DNG Converter works only on the folders that contain the raw files. It will not see the individual files contained therein.

Nikon AW110 .NEF Files in Camera Raw / DNG Converter

I'm a bit new to NEF, and even RAW to be honest. But far as I can see both DNG converter 8.2 and Camera Raw (newest) is not happy with the .NEF Files from my Nikon AW110 camera. It won't open them.
Is this something that will just be updated in DNG or RAW sooner or later? I have an early release of the AW110 and naturally there is not too much support out for it yet.
Please let me know if I should be able to open these or not. It's no worry if there's nothing i can do about it yet, I just want to make sure my camera raw or photoshop isn't broken.
Trying on OS X 10.9 (and 10.8) Photoshop 14.1.2 and Camera Raw 8.2.0.94
Thanks guys

ACR/DNG Converter 8.2 were released mid-Sept, which seems to be about the time or just before the Nikon 1 AW1 was available, so you’ll need to wait until at least the next release of ACR 8.3 / DNG 8.3 sometime in during late-Nov to early-Jan timeframe, I’d expect, unless there is something strange about that camera that requires extra time.
The first place ACR/DNGC are available is the release-candidate at Adobe Labs, so check back there from time-to-time:
http://www.adobe.com/
Here is the list of currently supported cameras, where the Nikon 1 series is just above the Olympus section:
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

Camera Raw Plug-In for CS4

Cannot open NEF files using CS4. Error message "... Not the right kind of document." Went to HELP, About Plug-In. Camera Raw and get Icon showing Green Plug and Version 5.7.0.213. Any help in using CS4 to Post Process Nikon ( NEF) file greatly appreciated

Ask such specific questions on the Camera RAW or Photoshop forums and include info about your camera. If it's a newer model, this may ber perfectly normal and the files may require you to upgrade to CS5.1 so you can use the latest versions of Camera RAW or use the standalone DNG converter...
Mylenium

Photoshopcs6 mac 0sx10.9 unable to open NEF files, already installed camera raw DNG converter 8.6

just installed photoshopcs6 running mac 0xs10.9 , installed DNG converter camera converter8.6 and still unable to open NEF files

Which nikon camera are the nef files from?
If you go to Photoshop>About Plug-In and click on the words Camera Raw, what version does it say?
Have you tried Help>Updates from within photoshop cs6 to the camera raw 8.6 plugin?
(then you shouldn't have to use the dng converter, unless your nikon is a very new model)

Updating Camera Raw plug-in for CS5.1

I have recently updated to Lightroom 5.7 on my PC and also use Phototshop CS5.1. When I use LR and then try to use the Edit in CS5.1 option I get the error message saying I should upgrade to Camera Raw plug-in version 8.7. I cannot find any way of doing this as Photoshop says the plug-in is already up to date. Help!

PS CS5 can only use up to ACR 6.x, its just not possible to upgrade to ACR 8.7.
If you are sending raw files from Lightroom 5 to PS CS5 for further editing when you see the mismatch warning choose "render using Lightroom" if you use the option "open anyway" the ACR version may not be able to process all your Lightroom edits.
The latest version of LR 5.7.1 is the equivalent of ACR 8.7.1

Unable to update Camera Raw 6.7 for PS CS5

After updating my OS to Windows 8.1, and reinstalling Photoshop CS5 and updates to version 12.0.4, I have been unable to complete the Photoshop Camera Raw 6.7 Update. All other updates to PS and Bridge installed correctly.
The update file downloads completely from http://www.adobe.com/downloads/updates.html, but immediately fails with the following screen:
"Some updates failed to install."
"The following updates were unable to install. If you wish to install these updates, please fix the problems below and retry:
Photoshop Camera Raw 6.7 Update
There was an error downloading this update. Please quit and try again later."
Is there a known workaround for this problem?

Please provide me with a snapshot from Ps->Help->Update->Preferences.
Please confirm your ACR version from Help->About Plugin->Camera Raw and provide us with the following logs.
You can find them at:
ACR Installer logs
For Mac:
Library\Logs\Adobe\Installer
For Win:
Program Files(x86)\Common Files\Adobe\Installers
AAM logs
For Mac:
/Volumes/%Volume Name%/Users/%Username%/Library/Application Support/Adobe/AAMUpdater/1.0
For Win:
C:\Users\<username>\AppData\Local\Adobe\AAMUpdater
You can zip all the files together and send us through mail. This would help us in finding the root cause.
Appreciate your help. Apologize for the inconvenience.
Regards,
Ashutosh
[email protected]

Camera raw 5.2 for CS4

I tried to download camera raw 5.2 and install it. It stops the installation saying stop the following application: Adobe Bridge and then retry. The thing is, Adobe Bridge is not running. I know there is a way to do this manually by moving a file into one of Adobe folders. Any one know how to do this? Windows XP is my operating System

Paul, if it's any consolation, I went through the same thing when I first got CS4. It opened Bridge by default when I booted up the computer. I worked a bit in CS4 (enough to find out that it didn't work very well for me), then shut it down and started up CS3. Bridge CS3 wouldn't open, because Bridge CS4 was already open. I finally noticed the Bridge CS4 icon showing in the task bar (lower right corner of screen).
Myself, I think it's a bad idea to let Bridge CS4 start at boot-up. Talk about having a big ol' honkin' app running in the background! I'll launch Bridge when I feel the need to, thank you very much.

After updating Camera Raw to 8.2.0.94 cannot open .NEF files

After updating my camera raw plugin today to 8.2.0.94, I can not open .NEF files from Nikon 7100
I receive "Could not complete your request because an unexpected end-of-file was encountered." error.
Photoshop CS 6, MacBook Pro OS 10.8.5

That error message usually, practically always points to a damaged or corrupt image file.
If you used Nikon software to copy the files to your Mac, be advised that said Nikon software is notorious for damaging files in the process. Use the Mac Finder or, better, Bridge to download your images.
A faulty card, a failing hard drive, a bad USB port or cable can also be the cause of damaged files.
I have never seen or heard of that error message being generated on a Mac by a faulty Camera Raw installation or anything other than a corrupted or damaged file.

Updated camera raw / DNG converter for CS4 compatible with D800 NEF?

Similar Messages

Maybe you are looking for