Updated Droid Turbo this morning to Advanced Calling now the phone keeps freezing and restarting - why? - and how do i fix

I have had my Droid Turbo for less than a month.  This morning I downloaded and installed the upgrade for Advanced Calling.  Now my phone has basically quit working.  The phone keeps freezing and/or automatically restarting.  Why and how do I fix it?

Unless I am wrong, ErinW_VZW, the upgrade for advanced calling is NOT an app - it is a system update and therefore cannot be uninstalled.  Kinda scary that you do not know this. 
LLATOO - My advice to you is to perform a factory reset. Look under System Settings -> Backup and Reset -> Factory Data Reset.  This will obviously delete your entire phone so backup what you need.

Similar Messages

  • I have just updated my iPhone4s to ios6 but now my phone keeps freezing and my apps freeze and close why is this?

    I have just updated my iPhone4s to ios6 but now my phone keeps freezing and my apps freeze and close why is this

    try a reset hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.

  • HT201210 I had an update message on my phone and I clicked yes to update.  Now the phone has a picture of itunes and usb connection, but can't be used.

    I had an update message on my phone and I clicked yes to update.  Now the phone has a picture of itunes and usb connection, but can't be used.  itunes says I have to restore my phone, but will lose all the data.  Is there anything else I can do? I really don't want to lose all my pictures and other data.

    It's in recovery mode. There is nothing left on the phone at all. If you didn't back it up before you started, your data is gone.
    you have no choice but to restore at this point.

  • Downloaded new software to version 6 but now my phone won't connect to 3G. How can I fix this?

    I downloaded new software for iPhone. Now my phone won't connect to 3G. How do I fix this??

    You can use the [https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/ Add-on Compatibility Reporter] to re-enable the add-on and let us know whether it works in Firefox 6.
    For more details, see this page: [[Add-ons are disabled after updating Firefox]]

  • I inserted an SD card into my macbook pro and it didnt prompt me that a device was inserted so I took it out. Now the camera isnt showing anything on it. How do I fix this?

    I inserted an SD card into my macbook pro and it didnt prompt me that a device was inserted so I took it out. Now the camera isnt showing anything on it. How do I fix this?

    AFAIK cameras offer their own built-in format utility for inserted SD cards.  You should use that.  Otherwise, refer to the manual that came with your camera to determine precisely how your SD cards need to be formatted to work properly.  Personally, I'd suggest Partition Scheme: MBR, and Filesystem: FAT32.
    Try to limit the number of formats you perform on the SD cards, though, as you're reducing their lifespan.  I believe formatting causes re-writes to a portion of the SD card that has fewer read/write cycles than the rest of the card as a whole.

  • I cannot use multiple tabs for Hotties For Sale. I was able to do this until yesterday but now the same tab is duplicated each time. How can I fix this?

    I play an app called Hotties for Sale. Until yesterday I was able to operate several accounts on the game simultaneously by using separate tabs for each account. Now I can only open one account at a time with a single tab. When I open a second tab I just get a duplicate of the previous one. How can I fix this please?

    Final Cut is a separate, higher end video editor.  The pro version of iMovie.
    Give iPhoto a look at for creating the slideshow.  It's easy to assemble the photos in an album in iPhoto, put them in the order you want and then make a slideshow of them.  You can select from various themes and transitions between slides and add music from your iTunes library.
    When you have the slidshow as you want use the Export button at the bottom of the iPhoto window and export with Size = Medium or Large.
    Save the resulting Quicktime movie file in your Movies folder.
    Next, open iDVD, choose your theme and drag the QT movie file into the menu window being careful to avoid any drop zones.
    Then follow this workflow to help assure the best qualty video DVD:
    Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image  menu option. This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image, launch DVD Player and play it.  If it plays OK with DVD Player the encoding is good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    The reason I suggest iPhoto is that I find it much easier to use than iMovie (except for the older iMovie 6 HD version).  Personal preferences showing here.

  • I dropped my iPhone 6 plus and now the volume down button is lodged in. How do I fix this?

    I haven't had for my iPhone 6 plus for long - almost a month. But I just noticed that the volume down button is lodged in and it is stuck which must have been from me dropping it. But it doesn't affect the volume whatsoever as I can still lower or increase the volume, I was wondering what can I do to fix this or if I bring it to apple will they fix it for me for free?

    Since you have dropped the phone I don't think that they will do the repair for free, sorry.
    But you should not try to repair this on your own, make an appointment at the Genius Bar at an Apple Store and see what they decide.

  • On my ipad when i touch the icloud button it changes screen and at top it say account not verified. it keeps looking and looking. why? how can i fix this?

    when i turn on my ipad and go to settings then to icloud the ipad says account not verified. what does this mean? how can i fix it? it keeps looking and looking yet does find my account.

    Welcome to the Apple Community.
    Put in a request for another verification e-mail to be sent to you.
    Start here, change your country if necessary and go to manage your account.
    Also check your Mail rules and filtering, the verification mail may be going to a junk folder or even being deleted altogether. You may also wish to contact your mail provider to see if their spam filters are removing the email before it gets to you.

  • Updated reader to version 11.0.7.79, now all I am getting are gray screens. How do I fix this?

    I am using Firefox 29.0.1 browser, and Windows 7 Home Premium. After updating Reader to the latest version, (11.0.7.79), any pdf page I have tried to view, has controls,(buttons) for various actions (on the page border), and THAT PART of the page is normal, but the entire VIEWING screen is gray, and nothing ever loads. This did not ever happen until I updated Reader from version 10. How can I repair this?

    You do use the Adobe Reader plugin, not the Firefox PDF viewer?  See http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html
    If you use indeed the Adobe plugin, I would check your graphics driver: http://forums.adobe.com/thread/945765

  • My iPhone 4 just upgraded to ios7 and now the keyboard has 15-20 second delay. How do I fix this!

    Can I go back to iOS 6 
    Or is there a fix for this?
    My phone is incredibly frustrating and worthless for texting now. The initial password typing has the same issue.

    Try This...
    Close All Open Apps... Sign Out of your Account...  Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    And this... Reset all settings
    Settings > General > Reset > Reset all Settings.
    This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.

  • I download songs from itunes and the I accidently pressed the icloud back up button and now the songs I bought won't work. How do I fix this?

    idek

    Did you go to Settings>iCloud>Storage and Backup and then tap the Backup Button?
    What is the status of the songs on the iPod? Is there an icon by them? Are the grayed out?

  • HT4061 downloaded update in settings this morning. When phone came back on, it shows a line comingup from bottom of screen to a locked padlock, then an arrow above thre padlock, and ai Itunes icon above the arrow. After a few seconds, the phone shuts down

    I downloaded an update in settings this morning on my iPhone5. When phone came back on, the screen showed a line coming up from the bottom of the screen to a locked padlock, then an up arrow above the padlock, then an Itunes icon above the arrow. I tried swiping, tapping, everything, and nothing would happen. Then the phone shut down. What do I do?

    Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you.Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
    Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe".
    Please keep all correspondence regarding your issue in the private support portal.

  • I am trying to update my software and my phone keeps freezing

    I keep trying to update my iPhone but the phone keeps freezing about 60% of the way through the update. What can I do to fix this problem! Please help me!!!

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
    Select "/var/log/install.log" from the file list. Post the messages from the last installation attempt, starting from the time when you launched the Installer or Software Update.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • TS3694 How do I resolve error 1015?  I was syncing my phone to the computer and got this error about iTunes.  Now my phone is stuck on a screen with iTunes word and the USB symbol.

    How do I resolve error 1015 when syncing my phone to Mac?  Now the phone is stuck on iTunes icon and USB drive icon and not letting me get calls or make calls.  Please help.

    Wow I see from the other responses to similar questions that the phone may be jailbroken.  I thought I was purchasing an unlocked phone that was legal to use with any system.  What a disappointment, I will have to go back to where I purchased this phone and let them have an ear full.

  • Translation and Called # on the phone display

    Is there any way to made translation but leave displayed called # on the phone to number before translation?
    And similiar one with RoutePattern:
    When i prefix something like "666" on LG level to called #, after Setup/connect phone start to display called number with this prefixed digits. Is there any way to stay display w/o prefixed digits?

    I check it up, when user dialing and waiting for CONNECT from PSTN side - display shows correct short number, but after connect the number changes to long one. On isdn site it looks like:
    - dialed #: 12345678
    - called to PSTN: 6666666601234567
    (6666660 is IVR/IN telco operator number)
    and and i think becouse ISDN gives "connected" with called # no "real Called ID".
    Is there any way to made it displaing just 1234567 ?
    Sth like - always how dialed # or something ?
    TIA!

Maybe you are looking for