Updated encoder in iTunes 7?
Does anybody know if iTunes 7 uses a different encoder for AAC files? an updated, improved one?
Thanks.
The encoding itself is done by QuickTime, not iTunes. So if the version of QuickTime is the same, so is the encoding.
Gapless playback does not require an encoding change, but a change to:
1. The ID3 tags
2. Interpretation of the tags
For reference, MP3 does not officially support gapless playback - there will always be some artifact between tracks. AAC does support gapless, but until now Apple has not utilized this feature.
Similar Messages
-
Apple support had not responded to my requests for clarification. The update corrupted both ITunes and Office Outlook mobileme. The error message when I tried to start up I Tunes was Error 7 Windows 193. I un installed I Tunes and re installed the latest ver and encountered the same error message. I finally did a system restore. Was this a one time problem or is the update bad. In over 30 years I'd never had a problem with any Apple update.
Hi Lutacrew,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Regards,
- Brenden -
Ok so i have this iPod touch (3rd gen) and i'm trying to update it through iTunes and when i click check for update it keeps saying this version of iPod software (2.2.1) is your current version. what do i do? how do i update it?
You have a 1st generation iPod Touch. It can not be upgraded beyond iOS 3.1.3, it is available at the link below.
http://support.apple.com/kb/HT2052 -
After 'updating' the newest iTunes version, I cannot sync my iPod Nano! The 'old' version recognized and showed in icon to sync, but the newest version does not. Is there a way to sync the older iPods?
http://support.apple.com/kb/TS1591
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again. -
When trying to update Apps in iTunes on my computer my old Apple ID appears, which is no longer in use and has no password; even when I try to create a password for this Old ID, Apple won't let me. When I go into see my Account settings My new Apple ID / iTunes ID are listed and the passwords are correct obviously so why can't I update my Apps? Why does my Old apple ID keep appearing and how can I get Apple to change this?
I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option? -
App update available from iTunes, but not from iOS ?
Found earlier today that one app had an update available on iTunes on my PC (Windows 7) ... while it wasn't available from the app store on my iPhone. The iOS app Store kept showing the old version of that app as the latest. Had to sync the iPhone with iTunes to transfer the update. How can that happen? ... and no my App Store app on iOS is not completely broken, as it keeps giving me updates for all other apps ... so far. Meaning that my Apple ID isn't a problem either.
On the iPod open the App Store app > Updates > Purchased then redownload. If nothoing shows make sure you are signed in with the same Apple ID that the purchase was made with:
Settings > iTunes & App Stores > Apple ID -
My computer is saying it can't find the file 'iTunes64.msi' when I try to update or redownload iTunes how do I fix this? I've tried just about everything I can think of. I am using a dell laptop running windows 7 and have tried changing the file location to run the update in all of my iTunes files as well as when I've tried reinstalling it.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
I recently did an update for my iTunes and now when I try to open it, I get an error that says that my data execution prevention is not allowing it to open. How do I fix this issue?
Try updating your QuickTime to the most recent version. Does that clear up the DEP errors in iTunes?
-
When I try to update to iOS5, iTunes gets stuck on "Backing Up" its been there for hours and it barely moves. It finished backing up one then it went to a "Extracting Software" on the iTunes status bar up top and then it gave me an error saying something along the lines of "There was an error with the server" and back to square 1. Ive been trying since the morning and same problem. Always stuck on the backup, help?
You may have lost your connection to the apple server or connection with your itunes library.
1) You will need to shutdown Itunes and disconnect your iphone from the USB cable.
2) Reconnect your Iphone to the usb cable, wait for the device to be recognised and or drivers to be installed.
3) once all ok, your itunes should automatically open up/connect (if you have this setting set on), otherwise double click your itunes icon on your desktop.
4) once all sychronised and connected. go to Summary tab and UPDATE your iphone again.
Hope this works for you, as this happend to me and tried the above steps and wala!!! all good.
If the above still fails, restart your pc/apple and turn off/on your modem and then try again.
this normally happens if your connection from your device to the itunes hangs or looses its connection, or have a bad connection to the internet / apple server.
in windows the RPC Locator is normally the cause of this, in apple i have no idea (as im not an apply user).
Give it a shot!
if this helps you and works ...why not rep/like my response up! -
I have itunes in windows xp, but my ipod touch has updated version of itunes. Windows xp cannot get updated itunes. I am having difficulties transferring my music into my computer. Does any one have an idea how to do it?
iTunes 11 is compatible with
Windows System Requirements
PC with a 1GHz Intel or AMD processor and 512MB of RAM
Windows XP Service Pack 2 or later, 32-bit editions of Windows Vista, Windows 7, or Windows 8
Try:
Trouble installing iTunes or QuickTime for Windows -
Can not update iTunes because I have iMac with 10.5.8 . How I will sync my iphone 6.0 with an older version of iTunes on my iMac???? There is no update for the software of my iMac and no update for the iTunes.... So how can I sync????
Requirements for iPhone 5:
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.7 or later
The highest version of iTunes you can install is 10.6.3 which will not sync with the iPhone 5.
Roger Wilmut1 wrote:
It's always a good idea to check the requirements before purchasing.
The person I spoke with at 1-800-MY-APPLE gave me totally different info...she said the iPhone 5 would in fact sync with the older version of iTunes and that I could restore from my previous iPhone 4 backup and also bring in my music that way. Hmmm....
I'm inclined to go by the published specs, but now I have to jump thru a bunch of hoops I wasn't expecting to. -
How do I update my existing Itunes to 11.1 on my phone and mac? Thanks
How do I update my existing Itunes to 11.1 on my phone and mac? Thanks
The 11.1 update I believe is only for OS X and not IOS. Look for the update in the Mac App Store/Updates or System Preferences/Software Update. To be safe, make sure you backup your system first.
-
How do i update my existing itunes account
How do I update my existing itunes account to sync my new iPhone?
go to store>account make changes.
-
I have a problem with my Iphone 4s since I did my first update at your Itunes, the bluetooth and the WiFi it is not workinhg anymore.
It is sad that companies like apple are not able to support thier sofware and business.
I went to a apple store at South Park, Charlotte NC,
and found out the worst customer service (in my case)
They don't have answers and don't understand about "dont let any customer go away sad or mad"
I explain to them that I did everything they said to fix the problem, even to dounload the iOS 6.1.3
that was supposed to fix the problem.
they said fix the problem in other phones but not in mine.
So here I am with no wifi and bluetooth, with apple technicians and experts that don't know what to do with the problem that the sofware they developed cause in my iphone 4s.
and the solution is for me to pay $199.00 US dollars for a problem that I did not cause.
wich means to buy something else from apple to fix a problem that it is not my fault.
Great! what a convenient solution.
I would like to have an answer from you guys and see if someone there have a better answer for me that shows support, values and integrity as a grest company with solutions for your customers.
Dont think that I want a new phone, I want mine fixed if is possible.
Thank you very much and God Bless you!Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$
-
i would like to sync my second generation ipod touch to a new laptop with the recently updated version of itunes. in order to do this, it deletes all the music of the ipod. i would like to be able to save my music as i have spent alot of money purchases it. i have backed up the ipod in order not to loose any of the music but i cannot find where the songs are backed up to? can you please help me find where the songs have been backed up to so i can save them please
See:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
The iPod backup that iTunes makes does not include synced media like apps and music.
Maybe you are looking for
-
Hi, I modify a jsp in which we have to remove the lov of a field according to the responsibility. but its giving some error. that i am not able to see. so can you please tell me whats the problem in this code. <td nowrap align="right" class="prompt"
-
How to Restrict the users in oracle applications
Hi, I want to Restrict the users in oracle applications without using database can any one please expalin me how to resttrict the users using middletier Thanks Gita
-
Short dump in RSA3 --Z Data Source
Hi, I created a Z data source based on view and i appended extract structure to insert ZZ fields. When i execute the data source it is showing me short dump how shall i proceed I checked the view conditions and it is extracting data and showing now e
-
Managed Server won't talk to NodeManager-- Security issue... Certificate Chain incomplete
Hey All, I am trying to set up a Managed Server and have it talk to the NodeManager running (Weblogic 8.1 SP2) on the same machine. I can't, however, seem to get a good SSL handshake between the two. I get the following error: ####<Mar 11, 2004 9:55:
-
My question... any answers pl. I have a big problem with my Iphone 4...the pics and videos that i capture, often shows as inverted or orientted by 90/180/270 degrees. photos, one can rotate, but how about videos... is there any way i'm going wrong? t