Updated Firefox and seem to have lost the "restart w/ previous session" option. Can I reactivate this feature without risk?

This convenient feature was in the previous version but does not appear in the current. Is it just gone or now must be chosen from a secret menu ... or what? Any thoughts suggestions or efforts to assist will be much appreciated.

Hi moodzw,
You should try typing this in the address bar:
about:home
Set that page as your home page and restart Firefox. If you don't know how to change the home page, you should take a look at the Knowledge Base article [[How to set the home page]].
Hopefully this helps

Similar Messages

  • HT204291 I updated my apple tv to the latest firmware. I seem to have lost the ability to mirror my ipad 3rd gen. Can anybody help

    I bought an apple tv for its ability to mirror any of the content on my new ipad 3rd gen. Now after updating my apple tv i seem to have lost the ability to mirror my tablet onto the screen. Can somebody help with this. I have tried to do everything. I made sure both my apple tv and my ipad are connected to the same network. I also made shure my bluetooth was off. I can still airplay with my brothers iphone 4s. ( ios5.1) but i cannot do the same with my tablet.

    To U2SockMonkey,
    You must be a newbie, because otherwise you would have fixed it. I don't have that mirroring problem and it must be because you are not looking around and inform yourself thoroughly. It took me also 2 days of grief before I found out how to do it. Not even to mention that the Apple Engineer that I called did not have a solution either and just suggested that I should send my Apple TV back or go to a Apple Store nearby.
    I was pretty annoyed about that such a little black box was giving me grief. I have been working in the IT industry for over 30 years and I know quite a bit inside out about many hardware's. But my opinion is that sending out Version 6.0 Aka 5.1 as you rightfully say is not on with me.
    This is the same behaviour that Apple now does as Microsoft forever is doing. Not finishing the products and putting it on the market or release it before it is finished and has bugs in it.
    Personally this irks me and annoys me. Because I am in that field for many years and have seen what grief it causes. I have noticed that an Administrator has removed another post that I made about other matters concerning iPads and especially with iPad 3 and 4 now and that there are also other people who make inflamatory remarks to people ( Julian Wright for e.g.)  about how they have to spend their money for the latest stuff of Apple and come over very aggressive, selfish, if not evil.
    For your information, I used to work for Apple, I know Apple inside and how they work and what they used to do ? They were really nice for their employees and customers. But I think that has changed now for whatever reason they have. Very disappointing. It's up to Apple not to listen, I have no control of that, but it will cost them at some point.
    Besides that point, I feel that some people are been taken for a ride and when I am expressing that this is not OK I should be rewarded for that instead of being rejected.

  • I AM TRYING TO SET UP THE PRIVATE BROWSING FEATURE - I SEEM TO HAVE LOST THE FIREFOX BUTTON. HELP PLEASE

    WHEN I OPEN THE FIREFOX BROWSER, I NO LONGER SEEM TO HAVE THAT ORANGE BAR THAT SAYS FIREFOX AT THE TOP LEFT. I AM SHOWING FILE,EDIT,VIEW,HISTORY,BOOKMARKS, TOOLS AND HELP. I WANTED TO ACTIVATE PRIVATE BROWSING BUT SEEM TO HAVE LOST THE FIREFOX BUTTON THAT I NEED TO CLICK ON. THANKS, JANE

    Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: command+Shift+F).<br />
    If you are in full screen mode then hover the mouse to the top to make the Navigation Toolbar and Tab bar appear.<br />
    You can click the Maximize button at the top right to leave full screen mode or right click empty space on a toolbar and use "Exit Full Screen Mode" or press F11.
    *https://support.mozilla.org/kb/how-to-use-full-screen
    See also:
    *https://support.mozilla.org/kb/how-do-i-get-firefox-button
    *https://support.mozilla.org/kb/Menu+bar+is+missing

  • I seem to have lost the ability to directly upload a song from Garageband to facebook or e-mail on both my iMac and Macbook.  Any suggestions.

    I seem to have lost the ability to directly upload a song from Garageband to facebook or e-mail on both my iMac and Macbook.  Any suggestions?

    Have you repaired permissions and restarted your computer after installing ML?  Checked your printer settings in System Preferences?
    If Software Update does not list any updated drivers for your model printer, you should go to the printer's manufacturer website and download the drivers from there and/or contact their tech support to determine if your printer is compatible w/ML.
    Read the various Knowledge Base ML printing articles.  Here are a few to get you started: 
    OS X Mountain Lion: If the software for your printer can’t be found
    OS X Mountain Lion: Troubleshoot a USB printer
    OS X Mountain Lion: Troubleshoot an AirPort printer
    If none of the above work, post back w/the model of your printer and how it's connected to your computer.  USB?  Wireless?

  • TS4605 Hi, I was working in WORD on a file containing huge data. My machine just hung up one day while working and now I seem to have lost the file how do I get it back.  Please HELP me.

    Hi, I was working in WORD on a file containing huge data. My machine just hung up one day while working and now I seem to have lost the file how do I get it back.  Please HELP me.

    Well, iCloud has nothing to do with this.
    Do you have the built-in backup function Time Machine running on your Mac?
    See: http://support.apple.com/kb/ht1427

  • I seem to have lost the red, yellow and green dots that are in the upper left hand corner that close  or minimize the page.

    I seem to have lost the red, green, and yellow dots that are in the upper left hand corner that close or minimize the page.  How can I get them back?

    You may have to try a general OS X troubleshooting process to see if the issue goes away by doing this...
    Have you tried: starting the computer in SafeBoot mode, with shift key held down; a login screen should appear after a time, and then the regular desktop. At this point, locate Disk Utility in utilities folder, and run 'repair disk permissions' on the startup volume, usually the name given the hard disk drive as it appears on desktop. After Disk Utility is finished the permissions repair, restart the computer normally.
    ...The iTunes player has free support only through the duration of the hardware product's complementary or AppleCare extended plan coverages, so though you can download a newer version, that is not the same as free support for an issue. However, the iTunes Store or App Store has a different factor for their product.
    http://www.apple.com/support/itunes/
    There is an iTunes area in Apple Support Community discussions for more topics like this; except for when they involve a hardware product where an OS X is involved. If your computer is NOT a powerPC (an 'intel'-mac) the topic would more naturally need to be posted where that hardware and later supported OS X version topics get seen. So that is why one asks 'on what Mac running what version...' instead of writing four paragraphs in a wide angle reply. The details about your iMac and the OS X say more; without them, more questions arise.
    Good luck & happy computing!

  • Hi, My handset seems to have lost the Blackberry Messenger function and I have tried to install it again ....

    Hi,
    My handset seems to have lost the Blackberry Messenger function and I have tried to install it again however the handset keeps telling me it has the incorrct software???
    Please could it be reinstalled over the balckberry network???
    Message Edited by Beholder on 06-12-2009 09:16 AM

    Go to Options > Advanced Options > Application and delete the Blackberry Messenger.
    Then open your BB broswer > Go to www.blackberry.com/messenger
    If someone give you helpful hints, please click on Kudos.
    If you issue is resolved, mark Accept Solution next to the resolution post.
    Feel free to search www.blackberry.com/btsc to find your answers.

  • HT1766 I had to reset my settings on my iphone4 and seem to have lost all the pictures on my camera roll, how can I restore them

    I had to reset my settings on my iPhone, and seem to have lost all the pictures do my camera roll, how can I restore them

    restore from your backup.  IF you don't have a backup then your pics are gone.
    If you import your pics to your PC - you can use itunes to sync it back to your phone.

  • I seem to have lost the iBooks icon from my iPad.  When being prompted to open a document it asks if I wish to open in iBooks and can see the "books" there.  Any ideas on how to restore the iBooks icon?

    I seem to have lost the iBooks icon - any ideas?

    You've checked all your homescreens and app folders for it, and tried searching for it via the iPad's spotlight search screen (swipe your first homescreen to the right) ? There is a maximum of 11 homescreens after which apps are only accessible via the spotlight search scree.
    If not then have you tried a reset to see if you can find it after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. You could also do Settings > General > Reset > Reset Home Screen Layout which will re-arrange your apps and might make it easier to find.

  • I seem to have lost the "BURN" facility in my I tunes,  can anyone help please

    I seem to have lost the 'BURN' facility in my I tunes,  can anyone help please .

    Try connecting the device to your iTunes library in recovery mode and restoring it.  Use the instructions in this Apple support document to place the iPod into recovery mode.
    iOS: Unable to update or restore
    B-rock

  • TS3694 iPhone 5.....during update to iOS 7 I have lost the power supply (blackout)

    this issue , happen to my iPhone 5.....during update to iOS 7 I have lost the power supply (blackout)
    Sudden screen : USB pointing to iTunes . it shows that it need a restore and update .. after downloading the software
    and extracting .. found Error1 at the point Verify firmware . AGAIN AND
    and this is the log ..
    2014-08-11 15:46:30.611 [4472:1648]: restore library built Feb 12 2014 at 16:27:17
    2014-08-11 15:46:30.611 [4472:1648]: iTunes: iTunes 11.3.1.2
    2014-08-11 15:46:30.611 [4472:1648]: iTunes: Software payload version: 11D257 (option key)
    2014-08-11 15:46:30.611 [4472:1648]: iTunes: Using MobileRestore state machine
    [13:47:25.0555] Changing state from 'Idle' to 'Restoring'
    [13:47:25.0555] device software does not support nonce generation
    [13:47:25.0555] requested restore behavior: Erase
    [13:47:25.0570] requested variant: Erase
    [13:47:25.0570] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBEC"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBSS" Digest = "<CFData 061FEA80 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "LLB" Digest = "<CFData 061FD2E0 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
    [13:47:26.0569] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
    [13:47:26.0569] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
    [13:47:26.0569] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
    [13:47:26.0569] amai: _AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID <CFData 0BA32F38 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
    [13:47:26.0569] amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
    [13:47:26.0569] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Dell/AppData/Local/Temp/Per2046.tmp/amai/debug/tss-re quest.plist
    [13:47:27.0068] amai: tss_submit_job: HttpQueryInfo returned 200
    [13:47:27.0286] amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
    [13:47:27.0286] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Dell/AppData/Local/Temp/Per2046.tmp/amai/debug/tss-re sponse.plist
    [13:47:27.0318] amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for "Diags"
    [13:47:27.0333] <DFU Device 0562C260>: production fused device
    [13:47:27.0333] requested restore behavior: Erase
    [13:47:27.0333] device software does not support nonce generation
    [13:47:27.0349] WinDFU::OpenDFUDevice: path: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#93126bb7
    [13:47:27.0349] WinDFU::OpenDeviceByPath: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#93126bb7
    [13:47:27.0364] <DFU Device 0562C260>: operation 0 progress 2
    [13:47:27.0380] <DFU Device 0562C260>: operation 0 progress 5
    [13:47:27.0396] <DFU Device 0562C260>: operation 0 progress 8
    [13:47:27.0411] <DFU Device 0562C260>: operation 0 progress 10
    [13:47:27.0427] <DFU Device 0562C260>: operation 0 progress 13
    [13:47:27.0442] <DFU Device 0562C260>: operation 0 progress 16
    [13:47:27.0458] <DFU Device 0562C260>: operation 0 progress 18
    [13:47:27.0474] <DFU Device 0562C260>: operation 0 progress 21
    [13:47:27.0489] <DFU Device 0562C260>: operation 0 progress 24
    [13:47:27.0505] <DFU Device 0562C260>: operation 0 progress 26
    [13:47:27.0520] <DFU Device 0562C260>: operation 0 progress 29
    [13:47:27.0536] <DFU Device 0562C260>: operation 0 progress 32
    [13:47:27.0552] <DFU Device 0562C260>: operation 0 progress 34
    [13:47:27.0567] <DFU Device 0562C260>: operation 0 progress 37
    [13:47:27.0583] <DFU Device 0562C260>: operation 0 progress 40
    [13:47:27.0598] <DFU Device 0562C260>: operation 0 progress 42
    [13:47:27.0614] <DFU Device 0562C260>: operation 0 progress 45
    [13:47:27.0630] <DFU Device 0562C260>: operation 0 progress 48
    [13:47:27.0645] <DFU Device 0562C260>: operation 0 progress 50
    [13:47:27.0661] <DFU Device 0562C260>: operation 0 progress 53
    [13:47:27.0676] <DFU Device 0562C260>: operation 0 progress 56
    [13:47:27.0692] <DFU Device 0562C260>: operation 0 progress 59
    [13:47:27.0708] <DFU Device 0562C260>: operation 0 progress 61
    [13:47:27.0723] <DFU Device 0562C260>: operation 0 progress 64
    [13:47:27.0739] <DFU Device 0562C260>: operation 0 progress 67
    [13:47:27.0754] <DFU Device 0562C260>: operation 0 progress 69
    [13:47:27.0770] <DFU Device 0562C260>: operation 0 progress 72
    [13:47:27.0786] <DFU Device 0562C260>: operation 0 progress 75
    [13:47:27.0801] <DFU Device 0562C260>: operation 0 progress 77
    [13:47:27.0817] <DFU Device 0562C260>: operation 0 progress 80
    [13:47:27.0832] <DFU Device 0562C260>: operation 0 progress 83
    [13:47:27.0848] <DFU Device 0562C260>: operation 0 progress 85
    [13:47:27.0864] <DFU Device 0562C260>: operation 0 progress 88
    [13:47:27.0879] <DFU Device 0562C260>: operation 0 progress 91
    [13:47:27.0895] <DFU Device 0562C260>: operation 0 progress 93
    [13:47:27.0910] <DFU Device 0562C260>: operation 0 progress 96
    [13:47:27.0926] <DFU Device 0562C260>: operation 0 progress 99
    [13:47:27.0926] WinDFU::UploadData: EOF, cbRead: 554
    [13:47:27.0942] <DFU Device 0562C260>: operation 0 progress 100
    [13:47:27.0942] WinDFU::UploadData: ZLP
    [13:47:27.0957] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
    [13:47:27.0957] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_SYNC
    [13:47:27.0957] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
    [13:47:27.0957] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST, PollTimeout: 3000
    [13:47:30.0968] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
    [13:47:30.0968] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_WAIT_RESET
    [13:47:30.0968] WinDFU::ResetDevice: resetting...
    [13:47:31.0046] WinDFU::FinalizeDfuUpdate: success
    [13:47:31.0046] <DFU Device 0562C260>: DFU succeeded
    [13:47:31.0046] Finished DFU Restore Phase: Successful
    [13:47:31.0218] DFU mode device disconnected
    [13:47:31.0218] Device removed when in state Restoring, moving device to transition state
    [13:47:31.0218] Changing state from 'Restoring' to 'Transitioning'
    [13:47:31.0218] Creating timer to monitor transition
    [13:47:32.0175] DFU mode device connected
    [13:47:32.0175] Transitioning device returned, continuing restore.
    [13:47:32.0175] Canceling timer
    [13:47:32.0175] Changing state from 'Transitioning' to 'Restoring'
    [13:47:32.0175] AppleDevice::GetDeviceID: failed for iBoot
    [13:47:32.0175] requested restore behavior: Erase
    [13:47:32.0175] requested variant: Erase
    [13:47:32.0175] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is True
    [13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreLogo" Digest = "<CFData 061FDC70 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreDeviceTree" Digest = "<CFData 061FE378 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreKernelCache" Digest = "<CFData 0B9D5148 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreRamDisk" Digest = "<CFData 0B9D5190 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBEC" Digest = "<CFData 0B9D51D8 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBSS" Digest = "<CFData 0B9D5220 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "KernelCache" Digest = "<CFData 0B9D5268 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow1" Digest = "<CFData 0B9D52B0 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow0" Digest = "<CFData 0B9D52F8 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "LLB" Digest = "<CFData 0B9D5340 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBoot" Digest = "<CFData 0B9D5388 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "DeviceTree" Digest = "<CFData 0B9D53D0 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging1" Digest = "<CFData 0B9D5418 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "AppleLogo" Digest = "<CFData 0B9D5460 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryPlugin" Digest = "<CFData 0B9D54A8 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryFull" Digest = "<CFData 06266350 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging0" Digest = "<CFData 06266398 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RecoveryMode" Digest = "<CFData 062663E0 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID <CFData 064698C8 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
    [13:47:33.0064] amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
    [13:47:33.0064] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Dell/AppData/Local/Temp/Per2046.tmp/amai/debug/tss-re quest.plist
    [13:47:33.0298] amai: tss_submit_job: HttpQueryInfo returned 200
    [13:47:33.0501] amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
    [13:47:33.0501] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Dell/AppData/Local/Temp/Per2046.tmp/amai/debug/tss-re sponse.plist
    [13:47:33.0501] amai: _AMAuthInstallBundleInstallPersonalizedEntry: entry "iBSS" has been previously personalized; skipping it
    [13:47:33.0501] amai: _AMAuthInstallBundleInstallPersonalizedEntry: entry "LLB" has been previously personalized; skipping it
    [13:47:33.0517] amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for "Diags"
    [13:47:33.0532] <DFU Device 0BA2A9D8>: production fused device
    [13:47:33.0532] requested restore behavior: Erase
    [13:47:33.0532] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:33.0532] AppleDevice::GetDeviceID: failed for iBoot
    [13:47:33.0532] WinDFU::OpenDFUDevice: path: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#ca28221e
    [13:47:33.0532] WinDFU::OpenDeviceByPath: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#ca28221e
    [13:47:33.0564] <DFU Device 0BA2A9D8>: operation 0 progress 0
    [13:47:33.0579] <DFU Device 0BA2A9D8>: operation 0 progress 1
    [13:47:33.0595] <DFU Device 0BA2A9D8>: operation 0 progress 2
    [13:47:33.0626] <DFU Device 0BA2A9D8>: operation 0 progress 3
    [13:47:33.0642] <DFU Device 0BA2A9D8>: operation 0 progress 4
    [13:47:33.0657] <DFU Device 0BA2A9D8>: operation 0 progress 5
    [13:47:33.0688] <DFU Device 0BA2A9D8>: operation 0 progress 6
    [13:47:33.0704] <DFU Device 0BA2A9D8>: operation 0 progress 7
    [13:47:33.0735] <DFU Device 0BA2A9D8>: operation 0 progress 8
    [13:47:33.0751] <DFU Device 0BA2A9D8>: operation 0 progress 9
    [13:47:33.0766] <DFU Device 0BA2A9D8>: operation 0 progress 10
    [13:47:33.0798] <DFU Device 0BA2A9D8>: operation 0 progress 11
    [13:47:33.0813] <DFU Device 0BA2A9D8>: operation 0 progress 12
    [13:47:33.0844] <DFU Device 0BA2A9D8>: operation 0 progress 13
    [13:47:33.0860] <DFU Device 0BA2A9D8>: operation 0 progress 14
    [13:47:33.0876] <DFU Device 0BA2A9D8>: operation 0 progress 15
    [13:47:33.0907] <DFU Device 0BA2A9D8>: operation 0 progress 16
    [13:47:33.0922] <DFU Device 0BA2A9D8>: operation 0 progress 17
    [13:47:33.0954] <DFU Device 0BA2A9D8>: operation 0 progress 18
    [13:47:33.0969] <DFU Device 0BA2A9D8>: operation 0 progress 19
    [13:47:33.0985] <DFU Device 0BA2A9D8>: operation 0 progress 20
    [13:47:34.0016] <DFU Device 0BA2A9D8>: operation 0 progress 21
    [13:47:34.0032] <DFU Device 0BA2A9D8>: operation 0 progress 22
    [13:47:34.0063] <DFU Device 0BA2A9D8>: operation 0 progress 23
    [13:47:34.0078] <DFU Device 0BA2A9D8>: operation 0 progress 24
    [13:47:34.0094] <DFU Device 0BA2A9D8>: operation 0 progress 25
    [13:47:34.0125] <DFU Device 0BA2A9D8>: operation 0 progress 26
    [13:47:34.0141] <DFU Device 0BA2A9D8>: operation 0 progress 27
    [13:47:34.0172] <DFU Device 0BA2A9D8>: operation 0 progress 28
    [13:47:34.0188] <DFU Device 0BA2A9D8>: operation 0 progress 29
    [13:47:34.0203] <DFU Device 0BA2A9D8>: operation 0 progress 30
    [13:47:34.0234] <DFU Device 0BA2A9D8>: operation 0 progress 31
    [13:47:34.0250] <DFU Device 0BA2A9D8>: operation 0 progress 32
    [13:47:34.0281] <DFU Device 0BA2A9D8>: operation 0 progress 33
    [13:47:34.0297] <DFU Device 0BA2A9D8>: operation 0 progress 34
    [13:47:34.0312] <DFU Device 0BA2A9D8>: operation 0 progress 35
    [13:47:34.0344] <DFU Device 0BA2A9D8>: operation 0 progress 36
    [13:47:34.0359] <DFU Device 0BA2A9D8>: operation 0 progress 37
    [13:47:34.0390] <DFU Device 0BA2A9D8>: operation 0 progress 38
    [13:47:34.0406] <DFU Device 0BA2A9D8>: operation 0 progress 39
    [13:47:34.0422] <DFU Device 0BA2A9D8>: operation 0 progress 40
    [13:47:34.0453] <DFU Device 0BA2A9D8>: operation 0 progress 41
    [13:47:34.0468] <DFU Device 0BA2A9D8>: operation 0 progress 42
    [13:47:34.0500] <DFU Device 0BA2A9D8>: operation 0 progress 43
    [13:47:34.0515] <DFU Device 0BA2A9D8>: operation 0 progress 44
    [13:47:34.0531] <DFU Device 0BA2A9D8>: operation 0 progress 45
    [13:47:34.0562] <DFU Device 0BA2A9D8>: operation 0 progress 46
    [13:47:34.0578] <DFU Device 0BA2A9D8>: operation 0 progress 47
    [13:47:34.0593] <DFU Device 0BA2A9D8>: operation 0 progress 48
    [13:47:34.0624] <DFU Device 0BA2A9D8>: operation 0 progress 49
    [13:47:34.0640] <DFU Device 0BA2A9D8>: operation 0 progress 50
    [13:47:34.0671] <DFU Device 0BA2A9D8>: operation 0 progress 51
    [13:47:34.0687] <DFU Device 0BA2A9D8>: operation 0 progress 52
    [13:47:34.0702] <DFU Device 0BA2A9D8>: operation 0 progress 53
    [13:47:34.0734] <DFU Device 0BA2A9D8>: operation 0 progress 54
    [13:47:34.0749] <DFU Device 0BA2A9D8>: operation 0 progress 55
    [13:47:34.0780] <DFU Device 0BA2A9D8>: operation 0 progress 56
    [13:47:34.0796] <DFU Device 0BA2A9D8>: operation 0 progress 57
    [13:47:34.0812] <DFU Device 0BA2A9D8>: operation 0 progress 58
    [13:47:34.0843] <DFU Device 0BA2A9D8>: operation 0 progress 59
    [13:47:34.0858] <DFU Device 0BA2A9D8>: operation 0 progress 60
    [13:47:34.0890] <DFU Device 0BA2A9D8>: operation 0 progress 61
    [13:47:34.0905] <DFU Device 0BA2A9D8>: operation 0 progress 62
    [13:47:34.0921] <DFU Device 0BA2A9D8>: operation 0 progress 63
    [13:47:34.0952] <DFU Device 0BA2A9D8>: operation 0 progress 64
    [13:47:34.0968] <DFU Device 0BA2A9D8>: operation 0 progress 65
    [13:47:34.0999] <DFU Device 0BA2A9D8>: operation 0 progress 66
    [13:47:35.0014] <DFU Device 0BA2A9D8>: operation 0 progress 67
    [13:47:35.0030] <DFU Device 0BA2A9D8>: operation 0 progress 68
    [13:47:35.0061] <DFU Device 0BA2A9D8>: operation 0 progress 69
    [13:47:35.0077] <DFU Device 0BA2A9D8>: operation 0 progress 70
    [13:47:35.0108] <DFU Device 0BA2A9D8>: operation 0 progress 71
    [13:47:35.0124] <DFU Device 0BA2A9D8>: operation 0 progress 72
    [13:47:35.0139] <DFU Device 0BA2A9D8>: operation 0 progress 73
    [13:47:35.0170] <DFU Device 0BA2A9D8>: operation 0 progress 74
    [13:47:35.0186] <DFU Device 0BA2A9D8>: operation 0 progress 75
    [13:47:35.0217] <DFU Device 0BA2A9D8>: operation 0 progress 76
    [13:47:35.0233] <DFU Device 0BA2A9D8>: operation 0 progress 77
    [13:47:35.0248] <DFU Device 0BA2A9D8>: operation 0 progress 78
    [13:47:35.0280] <DFU Device 0BA2A9D8>: operation 0 progress 79
    [13:47:35.0295] <DFU Device 0BA2A9D8>: operation 0 progress 80
    [13:47:35.0326] <DFU Device 0BA2A9D8>: operation 0 progress 81
    [13:47:35.0342] <DFU Device 0BA2A9D8>: operation 0 progress 82
    [13:47:35.0358] <DFU Device 0BA2A9D8>: operation 0 progress 83
    [13:47:35.0389] <DFU Device 0BA2A9D8>: operation 0 progress 84
    [13:47:35.0404] <DFU Device 0BA2A9D8>: operation 0 progress 85
    [13:47:35.0436] <DFU Device 0BA2A9D8>: operation 0 progress 86
    [13:47:35.0451] <DFU Device 0BA2A9D8>: operation 0 progress 87
    [13:47:35.0467] <DFU Device 0BA2A9D8>: operation 0 progress 88
    [13:47:35.0498] <DFU Device 0BA2A9D8>: operation 0 progress 89
    [13:47:35.0514] <DFU Device 0BA2A9D8>: operation 0 progress 90
    [13:47:35.0529] <DFU Device 0BA2A9D8>: operation 0 progress 91
    [13:47:35.0560] <DFU Device 0BA2A9D8>: operation 0 progress 92
    [13:47:35.0576] <DFU Device 0BA2A9D8>: operation 0 progress 93
    [13:47:35.0607] <DFU Device 0BA2A9D8>: operation 0 progress 94
    [13:47:35.0623] <DFU Device 0BA2A9D8>: operation 0 progress 95
    [13:47:35.0638] <DFU Device 0BA2A9D8>: operation 0 progress 96
    [13:47:35.0670] <DFU Device 0BA2A9D8>: operation 0 progress 97
    [13:47:35.0685] <DFU Device 0BA2A9D8>: operation 0 progress 98
    [13:47:35.0716] <DFU Device 0BA2A9D8>: operation 0 progress 99
    [13:47:35.0716] WinDFU::UploadData: EOF, cbRead: 1116
    [13:47:35.0732] <DFU Device 0BA2A9D8>: operation 0 progress 100
    [13:47:35.0732] WinDFU::UploadData: ZLP
    [13:47:35.0748] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
    [13:47:35.0748] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_SYNC
    [13:47:35.0748] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
    [13:47:35.0748] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST, PollTimeout: 3000
    [13:47:38.0758] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
    [13:47:38.0758] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_WAIT_RESET
    [13:47:38.0758] WinDFU::ResetDevice: resetting...
    [13:47:38.0836] WinDFU::FinalizeDfuUpdate: success
    [13:47:38.0836] <DFU Device 0BA2A9D8>: DFU succeeded
    [13:47:38.0836] Finished DFU Restore Phase: Successful
    [13:47:39.0039] DFU mode device disconnected
    [13:47:39.0039] Device removed when in state Restoring, moving device to transition state
    [13:47:39.0039] Changing state from 'Restoring' to 'Transitioning'
    [13:47:39.0039] Creating timer to monitor transition
    [13:47:41.0674] Recovery mode device connected
    [13:47:41.0674] Transitioning device returned, continuing restore.
    [13:47:41.0674] Canceling timer
    [13:47:41.0674] Changing state from 'Transitioning' to 'Restoring'
    [13:47:41.0684] requested restore behavior: Erase
    [13:47:41.0684] requested variant: Erase
    [13:47:41.0684] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
    [13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
    [13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
    [13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
    [13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
    [13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBEC"
    [13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
    [13:47:42.0528] iBoot build-version = iBoot-1940.10.58
    [13:47:42.0528] iBoot build-style = RELEASE
    [13:47:42.0528] requested restore behavior: Erase
    [13:47:42.0528] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:42.0528] requested restore behavior: Erase
    [13:47:42.0528] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:42.0543] unable to open device_map.txt: No such file or directory
    [13:47:42.0543] found device map entry for 0x00008950 0x00000002. boardConfig=n42ap platform=s5l8950x
    [13:47:42.0543] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
    [13:47:42.0543] AMDeviceIoControl: GetOverlappedResult failed
    [13:47:42.0543] AMDeviceIoControl: pipe stall
    [13:47:42.0543] USBControlTransfer: error 31, usbd status c0000004
    [13:47:42.0543] command device request for 'getenv radio-error' failed: 2008
    [13:47:42.0543] radio-error not set
    [13:47:42.0543] unable to open device_map.txt: No such file or directory
    [13:47:42.0543] <Recovery Mode Device 0555AEB8>: production fused device
    [13:47:42.0543] requested restore behavior: Erase
    [13:47:42.0543] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:42.0543] requested restore behavior: Erase
    [13:47:42.0543] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:42.0543] interface has 1 endpoints, file pipe = 1
    [13:47:42.0543]
    [13:47:42.0543] <Recovery Mode Device 0555AEB8>: operation 4 progress -1
    [13:47:42.0606] unable to open device_map.txt: No such file or directory
    [13:47:42.0606] found device map entry for 0x00008950 0x00000002. boardConfig=n42ap platform=s5l8950x
    [13:47:42.0606] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
    [13:47:42.0606] requested restore behavior: Erase
    [13:47:42.0606] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:42.0606] requested restore behavior: Erase
    [13:47:42.0606] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:42.0606] <Recovery Mode Device 0555AEB8>: operation 42 progress -1
    [13:47:42.0606] requested restore behavior: Erase
    [13:47:42.0621] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:43.0651] <Recovery Mode Device 0555AEB8>: operation 5 progress -1
    [13:47:43.0994] unable to open device_map.txt: No such file or directory
    [13:47:43.0994] found device map entry for 0x00008950 0x00000002. boardConfig=n42ap platform=s5l8950x
    [13:47:43.0994] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
    [13:47:43.0994] AMDeviceIoControl: GetOverlappedResult failed
    [13:47:43.0994] AMDeviceIoControl: pipe stall
    [13:47:43.0994] USBControlTransfer: error 31, usbd status c0000004
    [13:47:43.0994] command device request for 'getenv ramdisk-delay' failed: 2008
    [13:47:45.0616] <Recovery Mode Device 0555AEB8>: operation 6 progress -1
    [13:47:46.0630] <Recovery Mode Device 0555AEB8>: operation 7 progress -1
    [13:47:46.0942] <Recovery Mode Device 0555AEB8>: operation 8 progress -1
    [13:47:46.0958] unable to open device_map.txt: No such file or directory
    [13:47:46.0958] found device map entry for 0x00008950 0x00000002. boardConfig=n42ap platform=s5l8950x
    [13:47:46.0958] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
    [13:47:46.0958] <Recovery Mode Device 0555AEB8>: operation 9 progress -1
    [13:47:46.0958] <Recovery Mode Device 0555AEB8>: Recovery mode succeeded
    [13:47:46.0958] Finished Recovery Restore Phase: Successful
    [13:47:48.0409] Recovery mode device disconnected
    [13:47:48.0409] Device removed when in state Restoring, moving device to transition state
    [13:47:48.0409] Changing state from 'Restoring' to 'Transitioning'
    [13:47:48.0409] Creating timer to monitor transition
    [13:47:52.0895] RestoreOS mode device connected
    [13:47:52.0895] Transitioning device returned, continuing restore.
    [13:47:52.0905] Canceling timer
    [13:47:52.0905] Changing state from 'Transitioning' to 'Restoring'
    [13:47:52.0905] <Restore Device 05577800>: operation 44 progress -1
    [13:47:52.0905] requested restore behavior: Erase
    [13:47:52.0905] requested variant: Erase
    [13:47:52.0905] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBEC"
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
    [13:47:53.0792] requested restore behavior: Erase
    [13:47:53.0792] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:53.0792] device did not return saved USB log
    [13:47:53.0792] device did not return saved panic log
    [13:47:53.0792] previous restore failed with exit status 0x100
    [13:47:53.0792] connected to service com.apple.mobile.restored
    [13:47:53.0808] using protocol version 13
    [13:47:53.0808] unable to open device_map.txt: No such file or directory
    [13:47:53.0808] board config = n42ap
    [13:47:53.0808] no value returned for BootArgs
    [13:47:53.0824] _copyDeviceProperty() failed for restore bootargs
    [13:47:53.0824] no value returned for MarketingPartNumber
    [13:47:53.0824] _copyDeviceProperty() failed for mpn
    [13:47:53.0824] requested restore behavior: Erase
    [13:47:53.0824] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:53.0839] value query for 'HardwareModel' returned 'N42AP'
    [13:47:53.0839] <Restore Device 05577800>: operation 28 progress -1
    [13:48:10.0360] previous restore failed: re:INF@ 145] created partition 1 as 'Effaceable'
    [13:48:10.0360] [nand_part_core:INF@ 145] created partition 2 as 'NVRAM'
    [13:48:10.0360] [nand_part_core:INF@ 145] created partition 3 as 'Firmware'
    [13:48:10.0360] [nand_part_core:INF@ 145] created partition 4 as 'Filesystem'
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 4
    [13:48:10.0360] [nand_part_core:INF@ 145] created partition 5 as 'System Config'
    [13:48:10.0360] [nand_part_core:INF@ 145] created partition 6 as 'Diagnostic Data'
    [13:48:10.0360] [nand_part_core:INF@ 145] created partition 7 as 'Bad Block Table'
    [13:48:10.0360] com.apple.AppleFSCompressionTypeZlib load succeeded
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 7
    [13:48:10.0360] AppleSamsungSerial: Identified Serial Port on ARM Device=uart1 at 0x32600000(0x82cc6000)
    [13:48:10.0360] L2TP domain init
    [13:48:10.0360] L2TP domain init complete
    [13:48:10.0360] PPTP domain init
    [13:48:10.0360] AppleSwissPPNFTL started with IOFlashStoragePartition provider
    [13:48:10.0360] [NAND] _FindFlashMediaAndKeepout:601 physical nand block offset 1
    [13:48:10.0360] AppleNANDFTL registered[NAND] start:356 this 0x85e41800 PROVIDER=0x85f2a400 flashMedia=0x85f2a400
    [13:48:10.0360] [NAND] WMR_Start:149 Apple PPN NAND Driver, Read/Write
    [13:48:10.0360] [NAND] WMR_Start:174 FIL_Init  [OK]
    [13:48:10.0360] AppleSamsungSerial: Identified Serial Port on ARM Device=uart3 at 0x32800000(0xde3b4000)
    [13:48:10.0360] virtual bool AppleDisplayPipe::start_hardware(IOService *), auto-detect chip
    [13:48:10.0360] [NAND] WMR_Open:371 VFL_Open    [OK]
    [13:48:10.0360] Scaler 0 enableDeviceClock(true,HALF_CLOCK_INDEX) = 0x0
    [13:48:10.0360] Scaler 0 enableDeviceClock(true,FULL_CLOCK_INDEX) = 0x0
    [13:48:10.0360] Scaler 0 enableDevicePower(true,0,HALF_CLOCK_INDEX) = 0x0
    [13:48:10.0360] Scaler 0 enableDeviceClock(false,FULL_CLOCK_INDEX) = 0x0
    [13:48:10.0360] void AppleDisplayPipe::setupVideoDownscalingLimits(): minimum-frequency property not found, using getClockFrequency(0) instead.
    [13:48:10.0360] Scaler 1 enableDeviceClock(true,HALF_CLOCK_INDEX) = 0x0
    [13:48:10.0360] Scaler 1 enableDeviceClock(true,FULL_CLOCK_INDEX) = 0x0
    [13:48:10.0360] Scaler 1 enableDevicePower(true,0,HALF_CLOCK_INDEX) = 0x0
    [13:48:10.0360] Scaler 1 enableDeviceClock(false,FULL_CLOCK_INDEX) = 0x0
    [13:48:10.0360] AppleMultitouchN1SPI: successfully started
    [13:48:10.0360] AppleH4CamIn::start - back camera expected
    [13:48:10.0360] AppleH4CamIn::start - front camera expected
    [13:48:10.0360] AppleH4CamIn::power_off_hardware
    [13:48:10.0360] AppleAP3DSH::probe found device with ID: 0x3f
    [13:48:10.0360] AppleAP3DSH::handleStart _calibrationMatrix [64699 -1892 -370] [-1570 65035 -244] [849 465 63854]
    [13:48:10.0360] AppleAP3DSH::handleStart _calibrationOffsets [518853 -714699 -1661621]
    [13:48:10.0360] AppleAP3DSH::handleStart - No calibration inverse matrix or the data is invalid, Compute locally
    [13:48:10.0360] AppleAP3DSH::handleStart _calibrationInverseMatrix [66427 1929 393] [1599 66087 261] [-895 -507 67257]
    [13:48:10.0360] AppleAP3DSH::handleStart _odr400HzSampleInterval = 2440
    [13:48:10.0360] AppleH4CamIn::setPowerStateGated: 0
    [13:48:10.0360] AppleCS35L19Amp: could not allocate control 395
    [13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableDetect 1
    [13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableType USBHost
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
    [13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableDetect 0
    [13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableType Detached
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
    [13:48:10.0360] AppleMultitouchN1SPI: detected HBPP. driver will be kept alive
    [13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableDetect 1
    [13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableType USBHost
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
    [13:48:10.0360] display-scale = 2
    [13:48:10.0360] display-rotation = 0
    [13:48:10.0360] found applelogo at /usr/share/progressui/[email protected]
    [13:48:10.0360] found display: primary
    [13:48:10.0360] display: 640 x 1136
    [13:48:10.0360] found PTP interface
    [13:48:10.0360] AppleSynopsysOTGDevice - Configuration: PTP
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: PTP
    [13:48:10.0360] AppleSynopsysOTGDevice - Configuration: iPod USB Interface
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: USBAudioControl
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: USBAudioStreaming
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: IapOverUsbHid
    [13:48:10.0360] AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: PTP
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: AppleUSBMux
    [13:48:10.0360] AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device + Apple USB Ethernet
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: PTP
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: AppleUSBMux
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: AppleUSBEthernet
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioControl
    [13:48:10.0360] IOAccessoryPortUSB::start
    [13:48:10.0360] virtual bool AppleUSBDeviceMux::start(IOService *) build: Jun 11 2014 20:11:28
    [13:48:10.0360] init_waste
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBMux
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioStreaming
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function IapOverUsbHid
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBEthernet
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function PTP
    [13:48:10.0360] AppleSynopsysOTGDevice::startUSBStack Starting usb stack
    [13:48:10.0360] IOReturn AppleUSBDeviceMux::setPropertiesGated(OSObject *) setting debug level to 7
    [13:48:10.0360] AppleBCMWLANCore::init(): IO80211-46 Jun 11 2014 20:10:03
    [13:48:10.0360] [NAND] WMR_Open:420 FTL_Open    [OK]
    [13:48:10.0360] [NAND] _publishServices:642 FTL capabilities: 0x00000001
    [13:48:10.0360] [NAND] _ppnvflGetStruct:3469 Checking borrowed blocks - count: 23 max_count: 23
    [13:48:10.0360] [NAND] _fetchBorrowedList:881 number of borrowed blocks 16
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 0
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 1
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 2
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 3
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 5
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 6
    [13:48:10.0360] 000828.945879 wlan.N[0] AppleBCMWLANCore::start(): Starting with MAC Address: <<<mac address>>>
    [13:48:10.0360] 000828.946182 wlan.N[1] AppleBCMWLANCore::setPowerStateGated():   powerState 1, fStateFlags 0x20, dev 0xc476b000 (this 1, provider 0)
    [13:48:10.0360] 000828.946197 wlan.N[2] AppleBCMWLANCore::setPowerStateGated():  Received power state change before driver has initialized, ignoring
    [13:48:10.0360] IO80211Peer::addPhyStatistics Phy stats started for addr <<<mac address>>>
    [13:48:10.0360] IO80211Peer::addPhyStatistics Tx Completion stats started for addr <<<mac address>>>
    [13:48:10.0360] IO80211PeerManager::initWithInterface cant add monitoring timer
    [13:48:10.0360] Started logging for intf
    [13:48:10.0360] IO80211PeerManager::initWithInterface: inited peer manager
    [13:48:10.0360] IO80211Interface::init peerManager=0x87cb8800
    [13:48:10.0360] start:156
    [13:48:10.0360] start:156
    [13:48:10.0360] AppleARMBacklight::start: No AAP function
    [13:48:10.0360] [effaceable:INIT] found current generation, 90, in group 1
    [13:48:10.0360] [effaceable:INIT] started
    [13:48:10.0360] [effaceable:INIT] started
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49152 62078<-usb->4608
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49153 62078<-usb->4864
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888adec8 established 62078<-lo0->49154 62078<-usb->5120
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade18 established 62078<-lo0->49155 62078<-usb->5376
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888adec8
    [13:48:10.0360] recv(13, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade18
    [13:48:10.0360] recv(14, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade18 established 62078<-lo0->49156 62078<-usb->5632
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49157 62078<-usb->5888
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49158 62078<-usb->6144
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49159 62078<-usb->6400
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49160 62078<-usb->6656
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49161 62078<-usb->6912
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49162 62078<-usb->7168
    [13:48:10.0360] unrecognized key 'BootArgs' in value query
    [13:48:10.0360] failed to handle value query for key 'BootArgs', sending back empty response
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49163 62078<-usb->7424
    [13:48:10.0360] unrecognized key 'MarketingPartNumber' in value query
    [13:48:10.0360] failed to handle value query for key 'MarketingPartNumber', sending back empty response
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49164 62078<-usb->7680
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] client protocol version 13
    [13:48:10.0360] *** UUID 4B2AC217-7071-EC47-8945-EB5E2188BE49 ***
    [13:48:10.0360] Restore options:
    [13:48:10.0360]  UUID                           => <CFString 0x19315c0 [0x2f3ad0]>{contents = "4B2AC217-7071-EC47-8945-EB5E2188BE49"}
    [13:48:10.0360]  MinimumSystemPartition         => <CFNumber 0x1931510 [0x2f3ad0]>{value = +1660, type = kCFNumberSInt64Type}
    [13:48:10.0360]  SystemPartitionSize            => <CFNumber 0x1930f50 [0x2f3ad0]>{value = +1660, type = kCFNumberSInt64Type}
    [13:48:10.0360]  SystemPartitionPadding         => <CFBasicHash 0x192f3c0 [0x2f3ad0]>{type = mutable dict, count = 5,
    [13:48:10.0360] entries =>
    [13:48:10.0360]  2 : <CFString 0x1931540 [0x2f3ad0]>{contents = "128"} = <CFNumber 0x1931570 [0x2f3ad0]>{value = +1280, type = kCFNumberSInt64Type}
    [13:48:10.0360]  3 : <CFString 0x1930f20 [0x2f3ad0]>{contents = "16"} = <CFNumber 0x192f3f0 [0x2f3ad0]>{value = +160, type = kCFNumberSInt64Type}
    [13:48:10.0360]  4 : <CFString 0x192ede0 [0x2f3ad0]>{contents = "32"} = <CFNumber 0x1931250 [0x2f3ad0]>{value = +320, type = kCFNumberSInt64Type}
    [13:48:10.0360]  5 : <CFString 0x1931960 [0x2f3ad0]>{contents = "8"} = <CFNumber 0x192ed50 [0x2f3ad0]>{value = +80, type = kCFNumberSInt64Type}
    [13:48:10.0360]  8 : <CFString 0x1931180 [0x2f3ad0]>{contents = "64"} = <CFNumber 0x1931950 [0x2f3ad0]>{value = +640, type = kCFNumberSInt64Type}
    [13:48:10.0360] }
    [13:48:10.0360]
    [13:48:10.0360] entering load_sep_os
    [13:48:10.0360] device has no sep
    [13:48:10.0360] entering partition_nand_device
    [13:48:10.0360] device supports boot-from-NAND
    [13:48:10.0360] nand device is already partitioned
    [13:48:10.0360] entering wait_for_storage_device
    [13:48:10.0360] Searching for NAND service
    [13:48:10.0360] Found NAND service: IOFlashStoragePartition
    [13:48:10.0360] NAND initialized. Waiting for devnode.
    [13:48:10.0360] entering clear_remap_variable
    [13:48:10.0360] executing /usr/sbin/nvram
    [13:48:10.0360] entering format_effaceable_storage
    [13:48:10.0360] effaceable storage is formatted, clearing it
    [13:48:10.0360] effaceable storaged cleared
    [13:48:10.0360] entering ramrod_probe_media
    [13:48:10.0360] device partitioning scheme is GPT
    [13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
    [13:48:10.0360] executing /sbin/fsck_hfs
    [13:48:10.0360] AppleD1972PMUPowerSource: limiting USB input current to 390 mA (measured 462 mA)
    [13:48:10.0360] ** /dev/rdisk0s1s1
    [13:48:10.0360]    Executing fsck_hfs (version hfs-277.10.5).
    [13:48:10.0360] ** Checking Journaled HFS Plus volume.
    [13:48:10.0360] ** Detected a case-sensitive volume.
    [13:48:10.0360]    The volume name is Sochi11D257.N42OS
    [13:48:10.0360] ** Checking extents overflow file.
    [13:48:10.0360] ** Checking catalog file.
    [13:48:10.0360] ** Checking multi-linked files.
    [13:48:10.0360] ** Checking catalog hierarchy.
    [13:48:10.0360] ** Checking extended attributes file.
    [13:48:10.0360] ** Checking volume bitmap.
    [13:48:10.0360] ** Checking volume information.
    [13:48:10.0360] ** Trimming unused blocks.
    [13:48:10.0360] ** The volume Sochi11D257.N42OS appears to be OK.
    [13:48:10.0360] executing /sbin/mount_hfs
    [13:48:10.0360] mount_hfs: Could not create property for re-key environment check: No such file or directory
    [13:48:10.0360] /dev/disk0s1s1 mounted on /mnt1
    [13:48:10.0360] entering check_for_restore_log
    [13:48:10.0360] found restore log (size = 28347)
    [13:48:10.0360] entering unmount_filesystems
    [13:48:10.0360] error unmounting '/mnt2': Invalid argument
    [13:48:10.0360] entering clean_NAND
    [13:48:10.0360] NAND format complete
    [13:48:10.0360] entering ramrod_probe_media
    [13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0 system= data=
    [13:48:10.0360] entering format_storage_for_LwVM
    [13:48:10.0360] entering ramrod_probe_media
    [13:48:10.0360] device partitioning scheme is GPT
    [13:48:10.0360] unexpected partition 'LwVM' - skipping
    [13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system= data=
    [13:48:10.0360] entering create_filesystem_partitions
    [13:48:10.0360] User specified system partition size, skipping firmware extras size.
    [13:48:10.0360] system partition padding size is: 167772160 bytes
    [13:48:10.0360] unable to open : No such file or directory
    [13:48:10.0360] creating 2 partitions
    [13:48:10.0360] creating encrypted data partition
    [13:48:10.0360] entering ramrod_probe_media
    [13:48:10.0360] device partitioning scheme is GPT
    [13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
    [13:48:10.0360] wipe entire partition: 1 (old = 0 new = 1820)
    [13:48:10.0360] block size for /dev/disk0s1s1: 4096
    [13:48:10.0360] /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
    [13:48:10.0360] executing /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
    [13:48:10.0360] Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive HFS Plus volume with a 8192k journal
    [13:48:10.0360] block size for /dev/disk0s1s2: 4096
    [13:48:10.0360] /sbin/newfs_hfs -s -v Data -J -P /dev/disk0s1s2
    [13:48:10.0360] executing /sbin/newfs_hfs -s -v Data -J -P /dev/disk0s1s2
    [13:48:10.0360] Initialized /dev/rdisk0s1s2 as a 13 GB case-sensitive HFS Plus volume with a 8192k journal
    [13:48:10.0360] entering ramrod_probe_media
    [13:48:10.0360] device partitioning scheme is GPT
    [13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
    [13:48:10.0360] entering mount_filesystems
    [13:48:10.0360] executing /sbin/fsck_hfs
    [13:48:10.0360] ** /dev/rdisk0s1s1
    [13:48:10.0360]    Executing fsck_hfs (version hfs-277.10.5).
    [13:48:10.0360] ** Checking Journaled HFS Plus volume.
    [13:48:10.0360] ** Detected a case-sensitive volume.
    [13:48:10.0360]    The volume name is System
    [13:48:10.0360] ** Checking extents overflow file.
    [13:48:10.0360] ** Checking catalog file.
    [13:48:10.0360] ** Checking multi-linked files.
    [13:48:10.0360] ** Checking catalog hierarchy.
    [13:48:10.0360] ** Checking extended attributes file.
    [13:48:10.0360] ** Checking volume bitmap.
    [13:48:10.0360] ** Checking volume information.
    [13:48:10.0360] ** Trimming unused blocks.
    [13:48:10.0360] ** The volume System appears to be OK.
    [13:48:10.0360] executing /sbin/mount_hfs
    [13:48:10.0360] mount_hfs: Could not create property for re-key environment check: No such file or directory
    [13:48:10.0360] /dev/disk0s1s1 mounted on /mnt1
    [13:48:10.0360] executing /sbin/fsck_hfs
    [13:48:10.0360] ** /dev/rdisk0s1s2
    [13:48:10.0360]    Executing fsck_hfs (version hfs-277.10.5).
    [13:48:10.0360] ** Checking Journaled HFS Plus volume.
    [13:48:10.0360] ** Detected a case-sensitive volume.
    [13:48:10.0360]    The volume name is Data
    [13:48:10.0360] ** Checking extents overflow file.
    [13:48:10.0360] ** Checking catalog file.
    [13:48:10.0360] ** Checking multi-linked files.
    [13:48:10.0360] ** Checking catalog hierarchy.
    [13:48:10.0360] ** Checking extended attributes file.
    [13:48:10.0360] ** Checking volume bitmap.
    [13:48:10.0360] ** Checking volume information.
    [13:48:10.0360] ** Trimming unused blocks.
    [13:48:10.0360] ** The volume Data appears to be OK.
    [13:48:10.0360] executing /sbin/mount_hfs
    [13:48:10.0360] mount_hfs: Could not create property for re-key environment check: No such file or directory
    [13:48:10.0360] /dev/disk0s1s2 mounted on /mnt2
    [13:48:10.0360] entering resize_system_partition_to_options
    [13:48:10.0360] User specified system partition size, skipping firmware extras size.
    [13:48:10.0360] Found SystemPartitionPadding value of 167772160 bytes
    [13:48:10.0360] Erasing system partition prior to resize operation.
    [13:48:10.0360] block size for /dev/disk0s1s1: 4096
    [13:48:10.0360] /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
    [13:48:10.0360] executing /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
    [13:48:10.0360] Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive HFS Plus volume with a 8192k journal
    [13:48:10.0360] executing /sbin/fsck_hfs
    [13:48:10.0360] ** /dev/rdisk0s1s1
    [13:48:10.0360]    Executing fsck_hfs (version hfs-277.10.5).
    [13:48:10.0360] ** Checking Journaled HFS Plus volume.
    [13:48:10.0360] ** Detected a case-sensitive volume.
    [13:48:10.0360]    The volume name is System
    [13:48:10.0360] ** Checking extents overflow file.
    [13:48:10.0360] ** Checking catalog file.
    [13:48:10.0360] ** Checking multi-linked files.
    [13:48:10.0360] ** Checking catalog hierarchy.
    [13:48:10.0360] ** Checking extended attributes file.
    [13:48:10.0360] ** Checking volume bitmap.
    [13:48:10.0360] ** Checking volume information.
    [13:48:10.0360] ** Trimming unused blocks.
    [13:48:10.0360] ** The volume System appears to be OK.
    [13:48:10.0360] executing /sbin/mount_hfs
    [13:48:10.0360] mount_hfs: Could not create property for re-key environment check: No such file or directory
    [13:48:10.0360] /dev/disk0s1s1 mounted on /mnt1
    [13:48:10.0360] Trying to resize system partition to 1908408320 bytes aka 1820 MB
    [13:48:10.0360] entering adjust_partition_preflight
    [13:48:10.0360] partition:0 requiredSize=465920
    [13:48:10.0360] no change in size
    [13:48:10.0360] Successfully resized the system partition
    [13:48:10.0360] entering maximize_data_partition
    [13:48:10.0360] entering adjust_partition_preflight
    [13:48:10.0360] partition:1 requiredSize=<<<<<IMEI>>>>>>6
    [13:48:10.0360] maximizing data partition to 13946060799 bytes
    [13:48:10.0360] entering adjust_partition_preflight
    [13:48:10.0360] partition:1 requiredSize=3404800
    [13:48:10.0360] no change in size
    [13:48:10.0360] Successfully resized data partition to consume free blocks
    [13:48:10.0360] The system partition now has a total HFS+ capacity of 1820 MB
    [13:48:10.0360] entering ramrod_probe_media
    [13:48:10.0360] device partitioning scheme is GPT
    [13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
    [13:48:10.0360] entering unmount_filesystems
    [13:48:10.0360] entering ramrod_ticket_update
    [13:48:10.0360] looking up root ticket hash
    [13:48:10.0360] device tree ticket-hash: <CFData 0x1930040 [0x2f3ad0]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
    [13:48:10.0360] ticket_hash: <<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>
    [13:48:10.0360] received valid ticket (2741 bytes)
    [13:48:10.0360] entering restore_images
    [13:48:10.0360] Successfully marked device node /dev/rdisk0s1s1 as static data
    [13:48:10.0360] executing /usr/sbin/asr -source asr://localhost:12345 -target /dev/disk0s1s1 -erase -noprompt --chunkchecksum --puppetstrings
    [13:48:10.0360] void AppleUSBDeviceMux::handleConnectResult(struct BulkUSBMuxSession *, errno_t) new session to port 12345 failed: 61
    [13:48:10.0360] void AppleUSBDeviceM

    Hello gamavranje,
    Thanks for using Apple Support Communities.
    The icons you're seeing on your iPhone indicate it is in recovery mode.  Please plug your iPhone into your computer, and restore it with iTunes.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/HT1414
    Take care,
    Alex H.

  • I seem to have lost the ability to close windows at the top of the screen. What do I click on to change the look of the tool bar.

    I seem to have lost the ability to close a window at the top of the screen. I must have changed the tool bar in some way and I have no idea how to change it back. Any guidance?

    Settings-general-show scrollbars-always.

  • I have upgraded from tiger to leopard and seem to have lost Photoshop 7.0. how do i retrieve it?

    I have upgraded from tiger to leopard and seem to have lost Photoshop 7.0. Is it possible to retrieve it

    Photoshop 7.0 only goes as far as 10.4.11
    If you have a drive, you can put 10.4.11 on it or a partition of it
    and save some money.
    I am not convinced the upgrade is worth it,
    but I just do simple things.

  • At the develop stage, I seem to have lost the section for exposure, contrast, whites, blacks, clarity etc. Can you please help?

    At the develop stage, I seem to have lost the section for exposure, contrast, whites, blacks, clarity etc., can you help please?

    Right Click (CTRL Click on Mac) on any Panel header in the Develop module (ie. Tone Curve, HSL, etc) and put a check mark next to Basic to unhide it.

  • I seem to have lost the abilty to send a PM ...plus username..

    I seem to have lost the abilty to send a PM in the Adobe forums
    Is that the case for everyone or am I being stupid and missing something?
    For the record...I wanted to respond privately to Steven Gotz and Bill Hunt : re Usernames.
    @Bill ..awesome memory sir.
    You are absolutely correct when you informed Steven  of my username situation
    At least is the case of ShooterNZ, Craig used to use his real name, but somehow his Adobe I.D. got hosed, and he could not get it back, so he adopted ShooterNZ.
    Many of us were affected similarly at that time (a long time ago.)
    When I tried to fix it and  get it back ..I was informed it was not available as a Username.
    Used by some one else... that would have been me in fact .
    I was probably the first person in the world to steal my own identity ..off myself.   (With Adobes help)   
    @Steven
    What Bill said.
    No hidden mystery or reason  behind it apart from that!

    Not sure what is going on with your one "problem" computer.
    Many aspects of the Adobe Forums rely on JavaScript to function, so might be something there. On Chrome, I have recently lost the ability to "Attach" a URL link, as I was once able to do. I get only part of that Attach Link dialog screen now, so have to just Copy/Paste the full URL, rather than embed it, say over the word "ARTICLE," as I could until recently. I have not been able to find out what changed on my laptop, and with Chrome only - things worked perfectly for a year, or so, then suddenly I developed a problem, and it seems to be unique to my machine and to my installation of Chrome. Stuff happens.
    Good luck,
    Hunt

Maybe you are looking for

  • Subtotal in alv report based on the particular field value

    Hi, As per my requirement, i need to do subtotal of quntity field based on the material number field value in alv report. Ex:  if material number falls 1 to 10 then i need to be calculate and display subtotal qty amount with text " total of the mat1"

  • Urgent help with Nokia E71 back up/ restore

    the problem this morning when phone started switching on and off by itself. As I had similar problem recently (and got new handset), I tried to back up the content. the back up went well as far I could see and i was asked to restart the phone. once r

  • Aperture won't update Photo Stream

    I have downloaded Aperture 3.2, and have moved to iCloud. When I take photos on my iPhone, they appear very quickly on my iPhone and iPad in the "Photo Stream" album of the Photos app. It seems they only show up in Aperture if I go to the preferences

  • BPM 11g Process Cubes dashboards limitations

    Hello, Does anybody knows if there is a time limit restriction for data stored in the Process Cube schema? Would it be available 'forever'? thanks Josue

  • Fetch current Quarter and pass it to custom query

    Hi I need to pass the current date and find the quarter in which the date falls. The start and end date of the quarter need to be passed as a query parameter, in a custom query in UI designer. My query is as follows As shown in above screenshot,I hav