Updated first foz and cannot print maps onat mapquest,how ever can print map at internet exploere. Please advice

I had update fire fox now I can [print map quest map ,but can print those map on internet explore, how can could you give me advice

I am sorry if i wasted your time, it is late here and I am sleepy, I just realized I was irrevelant. For your problem, I think you should check your media player's video output i.e. X11 or Xv or yuv whatever. I don't know mine but vlc detects the correct one as default, but I guess it is X11.
And maybe you should check here: http://www.openchrome.org/trac/wiki/SupportedHardware

Similar Messages

I update the software and the app store was eliminated, how I can download again???

I update the software and the app store was eliminated , how I can download again ?? thank you

You cannot delete it or download it.
It is likely on another page, in a folder or you have restrictions set.

Iphone 6Plus will not allow POP email account and cannot print to my wifi printers, I did on my Iphone 5 until I upgraded, can anyone help

Iphone 6Plus will not allow POP email account and cannot print to my wifi printers, I did on my Iphone 5 until I upgraded, can anyone help

I had talked with three people at Apple tech support on the phone, one person in the Apple store in Indianapolis, plus the other places I mentioned. Only the one young man in the Apple store was even able to identify the problem which was the POP vs. IMAP issue. And then like you said he was only able to say he hoped it would be fixed in the next update release. I did call him back this morning and told him about your simple solution, that I had seen it at the Apple forum, and that he might suggest bringing this topic up at the next staff meeting. I also let my Verizon rep know and an agent at Comcast. Something so simple yet it took three days and a lot of frustration to get fixed. Thanks again. You're my hero! ~ Carol Thomas
Also forgot to mention ... I got the iPhone 6 Plus about three weeks ago and did not have this problem. But I did a backup of my iPhone 5S on the computer and then used that backup to restore to my new iPhone. The iPad I did differently and just set it up as a new iPad with no restoring from the old one. That must have made a difference on the phone because it was set up just like the 5S ... as a POP3.

App store tried to update iBooks app. I can only see Newstand app on my screen and cannot get to bookstore. How can I delete and download the iBooks app again. iBook still appears in the settings menu as version 2.1 Tx iPad 2, iOS 5.0.1, iBooks 2.1

App store tried to update iBooks app. I can only see Newstand app on my screen and cannot get to bookstore. How can I delete and download the iBooks app again. iBook still appears in the settings menu as version 2.1
Tx
iPad 2, iOS 5.0.1, iBooks 2.1

Hi,
the settings are gone, i guess. But even worse, I cannot get the iPad2 to play Full HD thru the Apple digital AV adaptor using apps that support (and advertise this), like AVPlayer HD. This definiteley used to work before one of the last iOS upgrades. (I am now at 5.1.1).

I have a canon MG5320 and cannot print in grayscale. How do I turn the off setting to on?

I have a Canon Mg5320 printer and cannot print in grayscale. I found the setting, however it is on the off position. How do I turn it to on?

You should be able to tick the box next to the text as shown below.

I have Adope Reader XI and cannot print. How do I print?

I have Adobe Reader XI and cannot print. How do I print?

Ctrl+P usually does the trick... If it's not working for you you'll need to explain what exactly goes wrong. We're not mind-readers and can't help you without more detailed information about your set-up and the nature of the problem.

HT4796 on my windows XP pro PC i opened windows migration assistant and the first message is: "Cannot start Outlook Express. The application can not initialize the storage. The computer doesn't have enough memory or your disk is full. (0x80007114)"

on my windows XP pro PC i opened windows migration assistant and the first message is: "Cannot start Outlook Express. The application can not initialize the storage. The computer doesn't have enough memory or your disk is full. (0x80007114)"
On my windows PC outlook express is NOT running and as far as i know, NOT installed.
How do I install Outlook Express??
I want to use my new Imac.....

Disk storage issues frequently happen if the hard disc is over 85% full. Make sure your trash can is emptied after backing up any files you want to keep elsewhere.

I have a B210 printer and cannot print 4 X 6 from my computer either Adobe, HP essentials or Kodak i

I have a b210 printer and cannot print 4 X 6 from my computer other than Snapfish. I have photos either on Adobe 8; scanned to myu HP Essentials or kodak. Even though I have paper that will fit in the printer. How can I rememdy this.

Hi, Matty. Select Page Setup from iPhoto's File menu, select your printer, and choose 4x6 as the paper size. I believe the Print dialog box governs what size the image is printed at, but the Page Setup dialog governs which paper tray is used. I don't have a printer that can use 4x6 paper, so I can't test this suggestion myself. Hope it works for you.

HT204266 The APP update request came for 4 apps. I submitted update all, but the system is stuck and will not update. Further, I cannot use those apps. How do I fix this?

The APP update request came for 4 apps. I submitted update all, but the system is stuck and will not update. Further, I cannot use those apps. How do I fix this?

Two other things to try -
Power your iPad off for a minute and then back on again.
Double tap the Home button, locate the updating apps (one by one) in the bottom task bar, press on it until the red minus sign comes up and click it. Repeat for the remaining apps. Try the updates again but do them one by one rather than Update All.

I have two screens on my Apple Mac and could extend work across both. Now updated to Mavericks and cannot do this. What can be done to restore my original functionality?

I have two screens on my Apple Mac and could extend work across both. Now updated to Mavericks and this no longer works. How could I restore the previous functionality? Is somethong wrong?

Hi Eustace.
Thanks for replying to my problem. After posting I noted the "More Like This" box on the right of the screen. The top topic was "Restore old dual screen functionality" and turned out to be the the same question with a surprising answer - in the "Mission Control" dialogue, NOT the "Displays" dialogue. There are five tick boxes at the top of the Mission Control screen and the last of them is "Displays have separate spaces" and this box was ticked through the loading of the Mavericks op. system (presumably). Unticking this box, as advised, restored the 'extended' mode and all is now well.
We live and learn!

HT1386 The laptop I originally synch'd my iphone 4s with is broken and cannot retrieve any files. How can I sync the phone with a new laptop without losing all my downloaded music and apps already installed on my iphone?

The laptop I originally synch'd my iphone 4s with is broken and cannot retrieve any files. How can I sync the phone with a new laptop without losing all my downloaded music and apps already installed on my iphone?

If the answer to the above question is "yes", FIRST, set up a backup of your new computer before you do anything else so the next time your computer breaks you will not be in the same situation. Backup solutions are numerous and inexpensive, and there is absolutely no excuse in the Third Millennium not to have one.
Then see this tip: https://discussions.apple.com/docs/DOC-3141

HT3606 i keep trying to update the software and it gets stuck on configuration, so i can i sped up the process?

i keep trying to update the software and it gets stuck on configuration, so i can i sped up the process?

Some general advice on updating:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site.
The Combo updater of Leopard 10.5.8 can be found here:
http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious! In fact a second restart can be recommended.
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a week or two while you regularly check their websites for updates.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
[b]If you are updating Safari (or just have):[/b]
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
/Library/InputManagers
~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).
Solutions for troubleshooting installation, startup, and login issues in Mac OS X v10.5
http://support.apple.com/kb/TS1541?viewlocale=en_US

Cannot print wireless from internet

i cannot print from the internet from my laptop but i can print from other programs

Hi, Could you tell exactly what happens when you try to print from the internet? Are there any error messages?
I work for HP.
If the advice given resolved the situation, please mark it as a solution and Kudos so that it may be located easily by others with the same problem. Thank you. .....

I cannot print off the internet.

I cannot print from the internet, the printer wants to fax the document and I do not have the printer set up to fax. I have Windows 7. I have a MX922 just set up.
Solved!
Go to Solution.

Hi mmwesty,
Please open your internet browser and then go to FILE and select the PRINT option. Please ensure that the PIXMA MX922 printer is selected in the window and not the PIXMA MX922 FAX. Next, please go to your START menu and select DEVICES AND PRINTERS. In the window that opens, please right-click over the icon for your PIXMA MX922 and select the SET AS DEFAULT PRINTER option. This will set the printer as the default when you attempt to print instead of the fax.
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

HT1414 i have the 1st iPad. Can it be updated to iOS 6.0.1? If not how to fix-when on the internet sometimes it will just stop and go to the apps screen.

i have the 1st iPad. Can it be updated to iOS 6.0.1? If not how to fix-when on the internet sometimes it will just stop and go to the apps screen.

svargaswp wrote:
i have the 1st iPad. Can it be updated to iOS 6.0.1? ...
No.
iOS 5.1.1 is the lastest for the iPad 1.
svargaswp wrote:
... how to fix-when on the internet sometimes it will just stop and go to the apps screen.
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Note:
Also consider Deleting any Apps you have Purchased / Downloaded but you now never use..
If necessary...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414

Updated first foz and cannot print maps onat mapquest,how ever can print map at internet exploere. Please advice

Similar Messages

Maybe you are looking for