Updated GT70 BIOS but still no vt-x. help please!
Hello everyone! This is my first post so forgive me if I don't sound to competent.
I updated my BIOS to the 10R listed on the MSI Website for the sake of virtualization. I updated from the 10C version.
After the update, I booted into the BIOS to verify that the BIOS version properly updated. It did. Then I searched for the vt-x option but I didn't see it. I read on another topic ( https://forum-en.msi.com/index.php?topic=165254.0 ) that this is normal, so I didn't give it much thought. I went ahead into Virtualbox to start up my virtual machine and the program tells me that this isn't possible because "vt-x features locked or unavailable in MSR."
Is there something else i have to do to my BIOS to properly unlock this feature?
OK so I ran the program and it says "Yes" for hardware virtualization but then it gives a link for "more" information. Upon clicking it it says
"This processor does offer advanced hardware support for virtualization. However, while running under a 64-bit version of Windows this program cannot execute its 32-bit kernel code to determine whether Intel's VMX virtual machine extensions are being locked on, locked off, or neither. Since there's a chance that your system's BIOS may be deliberately disabling support for hardware virtualization (some do) you should re-run this program, if possible, with administrative privileges under a 32-bit version of NT, XP, or Vista. That will allow SecurAble to run a bit of kernel-mode code in order to determine exactly what's going on. (Note that you can also poke around in your system's BIOS to see whether you're able to find any references to "hardware virtualization" or "VMX", etc."
So my system is Windows 7 64 bit. I also ran the SecurAble program as administrator but it gives me the same response. I don't have a 32 bit version of Windows so I don't know what to do next...
EDIT: I just checked Microsoft's HAV Detection tool and it says "Hardware-assisted virtualization is not enabled".
What should I do?
Similar Messages
-
Hi! I use MBP mid 2010. I upgraded my ram to 8gb 1066 mhz as per apple. I run mountain lion. Everytime I watch a videoclip on youtube, it just freezes or mostly just turns off and restarts. I tried erasing disk twice but still same problem. Help please?
Hi! I use MBP mid 2010. I upgraded my ram to 8gb 1066 mhz as per apple. I run mountain lion. Everytime I watch a videoclip on youtube, it just freezes or mostly just turns off and restarts. I tried erasing disk twice but still same problem. Help please?
-
i have just upgraded my iphone 4 to a 5. and was trying to back my 4 up on the computure so i could get all my pics and music on to my 5. but its saying i need to update my itunes which i have tried to do and is still not working any help please i have been trying for hours
how is it not working?
what version of itunes?
what ios on iphone4?
does it give an error msg? -
Since I upgrade to Lion OS my optical drive stop working can't read or write at all I did what I could to fix it but still not working , any help please
It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.) -
This just happened a day ago. It was when Windows failed to update. When I plugged my phone to the laptop, there seemed to be a pop-up box appearing in iTunes saying, "iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available" At first only the album artworks of the songs were not copied. I tried uninstalling and re-installing it using the instructions from here: Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support. But still, it did not work. That's why I though t that maybe because Windows wasn't able to update that's why syncing keeps on crashing.
However, after that failed update yesterday, I was able to update Windows 8.1 today. After that, I tried uninstalling and re-installing iTunes. I cleared up everything even the contents from the library to start anew. After that, I tried syncing it with my phone hoping that it would finally sync. Unfortunately, that evil pop-up window appeared again.
I really don't know what to do about it. I've been using iTunes for how many years already and I have never experienced crashing.
And about that solution, well Windows haven't notified me yet. And I doubt if they will.
I really hope that someone out here could help me solve this problem. I've been stressing out about this the whole day. It's just so hard because there are a lot of files that I lost, especially music. </3
ThanksHi shararara,
Welcome to the Apple Support Communities!
I understand that you are receiving an error that iTunes has stopped responding. I know you have already tried some treat troubleshooting, but in this situation I would suggest working through the steps suggested in the attached article.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
Best regards,
Joe -
I cannot open a tab to the right of an existing tab. I've followed the directions provided under normal FAQ. This feature just recently was wiped from my PC, and I am not certain how.
The Ask Toolbar is causing that in the Firefox 3.6.13+ versions. Uninstall that extension.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons -
NAT Type 2 but still strict in MW3 - Help please!!
So here's my dilemma. I've been searching for 2 days now how to get an open NAT type in Call of Duty: Modern Warfare 3.
I've got a BT HomeHub 2. Simply connecting wirelessly to the network grants me a NAT Type 2, which I understand is supposed to be moderate, and therefore open to a certain extent ... But in-game is says that I have a Strict NAT type and won't let me connect to friends' parties.
I've forwarded all sorts of ports as instructed to do so by various online blogs, that didn't work, neither did portforwarding's website.
I've tried using a static ip and enabling DMZ on the hub, but that wouldn't even allow my PS3 to connect to the router
I've even tried using PPPoE, entering some random's email and password into the boxes as I saw on youtube.
BT's solution is a load of rubbish ... "Try resetting the modem and select static ip in the HH settings".
Has anyone else come across this problem of NAT type 2 being strict on MW3, and have you managed to overcome it??
I'm not a total gimp when it comes to fiddling with computer settings but I can't work this one out.
ThanksExact same problem here,
Was the above successful and has it remained open?
I was able to quick fix my Nat type by simply loading the multiplayer on cod4 which must open up the required ports but even that is more complicated with the game not loading now at all unless you disable your router (another kettle of fish).
The strict Nat doesn't seem to be as bad lag wise so that's something the developers have fixed with the last MW3 update, however the lack of ability to connect to your friends with a million dollar multiplayer such as MW3 is quite frankly unacceptable and completely defeats the object of such games.
I've tried forwarding ports and all the other methods to no avail, I've yet to try MW2 too see if that will quick fix the problem.
But please let us know if your forwarded ports are still working with an open nat, and if you can join / hear friends.
Thanks in advance,
Otherwise I'm going to try some other routers as I have plenty of friends with different set ups playing fine with open Nat, that being said there are just as many with different providers and routers suffering the same dilemma, this is certainly not just a home hub issue although if I get another router to work I will certainly enjoy throwing the hh out the window... -
Intel virtualization activated in BIOS but still not detected by HAXM insataller
Recently I have satrted working on android, for AVD it requires (VT-x) to be enabled. After some searching on forums I enabled it in the BIOS (Pics attached) but still got the error. I have checked by hardware-Assisted Virtualization Detection Tool. I have also updated the BIOS but still got the same issue. Kindly help me out.
This question was solved.
View Solution.Hi there:
See if Paul's solution works for you:
http://h30434.www3.hp.com/t5/Notebook-Hardware/Hardware-Virtualization-Enabled-in-BIOS-but-not-detec...
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP** -
Neither my iPod Touch nor my iPhone will show up in iTunes when I plug in through the USB cable. My software is updated, I've restarted everything, I've reset the devices, but still no luck. Help?!
Check your System Profiler to see if your computer is recognizing them. You may need to reset the computers SMC.
Resetting the System Management Controller >>
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G + 120G OCZ Vertex 3 SSD Boot HD -
My ipod and itunes both are skipping to another song about in the middle of the song. It doesn't happen on all songs...only some songs. I have reset the ipod, I have done a restore, I have reloaded itunes, I have updated the ipod but still am unable to figure out why. It did not used to do this. I can't figure out any pattern to the songs it does it on versus that it doesn't do it on. Some of the songs are purchased, some are imported, etc. We are running Windows 7.
how long have you had your ipod? mine did the same but after a while you need to get a new one because of the battery...
-
Address of the user changed updated into sap but still not reflecting at
address of the user changed updated into sap but still srm shopping has the old
address .
what could be the possible reasons of this bug?Hi
Which SRM version are you using ? <b>We encountered the Same Issue long time back -></b>
Are you updating the Addresses in Web Transaction or using SAP GUI (SU01 transaction) ?
<b><u>Please go through the following SAP OSS Notes below, which will definitely help -></u></b>
Note 930371 - SRM 5.0: BBPUM01 Check Data
<u>Related Notes</u>
Note 931556 - SRM 5.0: Hiding the BBPUM01/BBPUM02 button
Note 923461 - SRM 5.0: BBPUM01 description for position
Note 885954 - SRM-UME: User synchronization with wrong address data
Note 884067 - BPartner w/o an private address can't change their settings
<u>Do let me know.</u>
Regards
- Atul -
HT4757 I have installed the Raw update 3.12, but still couldn't import the D800 NEF files
I installed the raw update 3.12, but still couldn't import the D800 raw files to Aperture & iPhoto.
I found a solution. My E–P3 raw files still showed up as “unsupported” after reinstalling the update from the standalone updater. I discovered that selecting one of the “unsupported” raw files and having Aperture reprocess it (even though it had never been processed at all) made the file recognizable by Aperture and allowed me to make adjustments to it. I then reprocessed all of my E–P3 raw files and the only problem I have noted is that the vertical files were not auto rotated.
In reprocessing the raw files, I selected "only photos without adjustments" and "reprocess existing images". I hope this helps anyone who experienced this problem. -
my apples messages is crashing? it just started, and i have updated my macbook, but still.... anyone else having this issue??
Hi,
Go to the Applications folder.
Highlight Messages
Do a Get Info (See File Menu for Keystrokes)
Change it from Opening in 32Bit mode to an unticked box (64bit mode)
Restart Messages
9:02 PM Tuesday; March 13, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
I have paid for Creative Cloud - illustrator CC 1 year monthly plan, but it still show "Trial Expired". I have tried to sign in and sign out creative cloud many times, but still can't work. Please help!
Does your Cloud subscription show on your account page?
https://www.adobe.com/account.html for subscriptions on your Adobe page
Also,
This is an open forum, not Adobe support... you need Adobe support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us" -
''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/793259]''
I installed Adobe dlm add-on and now Firefox will not open. I see the process starting in Task Manager but no window opens. Unistalled Firefox then re-installed but still no luck. HELP ME! I do not want to use IE! I presume it has something to do with Adobe DLM as ever since then it is not working.I had this problem for a couple weeks as well and it was extremely frustrating considering we use firefox for all our company tasks. Here is the solution:
First of all if you have no bookmarks you want to save, then go directly to step 7. If you want to save your bookmarks first, then follow these steps.
1. Shut down the computer
2. Reboot and open firefox
3. Go to Task Manager, right click firefox.exe, and click END PROCESS TREE
4. WAIT 30 SECONDS! Then Double-click the shortcut to try and open firefox again
5.Repeat steps 3 and 4 until firefox finally opens (trust me, eventually it will)
6. Once it finally opens, backup your bookmarks,
7. Download a copy of firefox from there website
8. Uninstall from programs menu and make sure to check the box REMOVE ALL COMPONENTS
9. install the new copy and BOOM! it works
If it doesn't work, you're an idiot. If you don't want to reinstall firefox, then you're out of luck. Good Luck!
Maybe you are looking for
-
How do I put iTunes songs on my mp3 player, it sails the format from iTunes doesn't work
Trying to put iTunes songs on my mp3 player, but my mp3 player said they are not mp3s and won't play
-
Video playback in Safari iOS 8 is horrible now
Any videos I play through websites in Safari all are horrible load times in the player now. A play button appears on screen, I wait some more, and THEN the video plays. This is the same wether on LTE or WIFI. Sometimes video skips around when playing
-
Hi Experts, Do you have any sample of commisson report in SD? Or, any FMs to get commisson? Thanks a lot. Yu
-
Message sent from XI but queue in waiting
Hi Guys, I am facing a strange problem in XI. First of all cleared all the inbound and outbound queues in XI. Then I ran an async service from XI. The flow is as follows. XI --> SCM system(PROXY) (PROXY)SCM>XI>HTTP So as per the flow the response cam
-
After system copy u0131 see PSAPTEMP size is 0 from db02
hi our system is sap ecc6 on oracle 10g (aix 5.3) after system copy ı see psaptemp table size is 0.original size is 2gb from prod system using brtools ı added a new file for psaptemp then ı did a stop/start and ı saw 2gb for psaptemp ı checked fi