Updated Illustrator CC to CC 2014, having problems with CC performance. Slow and does not quit

Updated Illustrator CC to CC 2014, having problems with CC performance. Slow and does not quit. What can be causing the issue?

Hello, please checkout my post concerning lagging issues.
I've also provided a link to a video I've recorded showing the Illustrator behavior on my iMac 27"
Adobe Illustrator Cs6 Lagging Extremely Slow on Yosemite 27" iMac i7 late 2013

Similar Messages

  • I have been having problems with my iPod touch and my WRT...

    I have been having problems with my iPod touch and my WRT54G router. I am so frustrated right now because after following the various steps mentioned in one of these threads, following Earthlink's prompts, and speaking with Apple, my iPod touch will still not work. It is connected to the internet but will not download the pages. It is quite frustrating. I have changed from WPA to WEP, I switched the 4th Generated key to the 1st. I've disabled this, enabled that. I've done just about everything. I updated the firmware. I made the switch from a partial bridge to a full bridge. Still nothing seems to work. Does anyone have any other suggestions? The one thing I have not done is enter the Apple code into the iPod which searches for website...-- I cannot access the internet with my iPod so this web address does not work. If anyone has been successful, will you please give me step by step instructions? Yesterday I was on the phone with Linksys for about an hour. Before that with Apple for about an hour and before that with Earthlink. How it is that I can walk into a Bread Co. or Apple Store and immediately connect to the internet with my iPod but I can't in my own house?? Everyone seems to think it is someone else's problem so I've gone around and around. Not one of the Linksys support personnel suggested I look here on this community forum. I had to pay the $9 fee to have advanced Linksys help but still my iPod does not work and when I called back, the man I spoke with seemed to think the case was closed because my PC, Laptop, and iPod are connected to the internet -- the iPod just won't download the webpages or get mail. My iPod's IP address begins with 192. I would appreciate any help on this matter
    Message Edited by AlliW on 10-02-2008 02:06 PM

    I had the same issues with my iPod touch & iPhone. It's a known issue with the touch & Linksys G routers. Go into settings on the touch & do the following.
    1. Settings - wifi - linksys
    2. Erase your DNS settings & input same numbers as in router
    Settings.
    3. Http proxy should be
    in off position.
    4. Close out & open safari you should now have a wireless
    connection.

  • I'm having problems with Flash Videos (Youtube and ESPN)

    I have been having this problem for the last couple of days now and it is really annoying. Whenever I watch a flash video like on youtube or espn my computer freezes up and the audio will make a loud buzzing sound. I have attached a video with the post so you can see what happens. I don't have problems with anything else except this. I also get this error no matter what browser I use. I have system restored my PC as far as I can go, and I've ran a ton of scans and driver update checks and nothing seems to work.

    merci a tous pour les nombreuses réponse. j'ai dû mal a les lire vue que je ne lit que le français. je vous remercié encore une fois amicalement. Blanchette 2.
    Date: Mon, 25 Jul 2011 19:50:19 -0600
    From: [email protected]
    To: [email protected]
    Subject: Re: I'm having problems with Flash Videos (Youtube and ESPN)
    What I meant is Hardware Acceleration off (disabled).
    >

  • I am having problems with my macbook pro and the dock.  About every fourth time I start the computer, the dock flashes on and off, then goes completely off and all I get is the spinning ball with brief moments of the cursor.  But the computer locks up.

    I am having problems with my macbook pro and the dock.  About every fourth time I start the computer, the dock flashes on and off, then goes completely off and all I get is the spinning ball with brief moments of the cursor.  But the computer locks up.

    Do you have Parallels installed by any chance?  There is a known problem that causes symptoms similar to this.  You do not need to actually be running Parallels at the time and nothing in ActivityMonitor would point to Parallels.  An update corrects the problem:
    http://kb.parallels.com/111541

  • I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?

    I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?

    1) This is because of software version 1.1. See this
    thread for some options as to how to go back to 1.0,
    which will correct the problem...
    http://discussions.apple.com/thread.jspa?threadID=3754
    59&tstart=0
    2) This tends to happen after videos. Give the iPod a
    minute or two to readjust. It should now be more
    accurate.
    3) This?
    iPod shows a folder icon with exclamation
    point
    4) Restore the iPod
    5) Try these...
    iPod Only Shows An Apple Logo and Will Not Start
    Up
    iPod Only Shows An Apple Logo
    I think 3,4, and 5 are related. Try the options I
    posted for each one.
    btabz
    I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

  • I'm Having problems with the video freezing and the sound carrying on since I up graded my iPad to ios8  BBC IPLAYER

    I Am having problems with the video freezing and the sound carrying on whilst watching BBC IPLAYER ITV PLAYER until I reboot video and the problem acures again

    Your Mac runs maintenance in the background for you.
    Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
    No idea why that was suggested.
    You may have a third party video player installed that's causing an incompatibility issue.
    Check these folders:
    /Library/Internet Plug-Ins/
    /Library/Input Methods/
    /Library/InputManagers/
    /Library/ScriptingAdditions
    ~/Library/Internet Plug-Ins/
    ~/Library/Input Methods/
    ~/Library/InputManagers/
    ~/Library/ScriptingAdditions
    The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
    To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library.

  • HT3042 Please show us the video tutorial for this because i am having so much problem with my iphone5 bluetooth and can not send any file . So plz plz help me

    Please show us the video tutorial for this because i am having so much problem with my iphone5 bluetooth and can not send any file . So plz plz help me

    You have to use airdrop which is on iOS 7

  • I have a problem with my ipod touch it does not light at all, what should I do?

    I have a problem with my ipod touch it does not light at all, what should I do?

    Try the troubleshooting here for your specific symptom:
    iPod touch: Hardware troubleshooting

  • Are you having problems with Windows XP Pro and Airport Utility Updates?

    I was having problems with my wireless laptop setting up my Bonjour Printer. I checked to make sure I had downloaded the latest updates to Airport Utility and Bonjour. Check. After doing this I noticed I couldn't see my Airport Extreme through the Airport Utility. After much frustration and bringing my entire network crashing down around me, I got help from a knowledgeable guy from Cox Cable in San Diego. He helped me get my trusty iMac Power PC online. It saw my Airport Extreme but no answers were forthcoming in any forums about my XP issues. Here is what finally solved my problem. I uninstalled all Airport Utility and Bonjour Programs. I then went back to Airport Utility 5.3.1 for Windows. It installs Bonjour Printer services with this download. Everything is working perfectly again. I have my Canon Pixma MP500 connected to the USB port on my AEBS and Bonjour walked right through the setup process. I suggest that if this works for you, turn off all Airport Utility and AEBS firmware updates until you see that whatever issue Apple created with these updates gets fixed.

    Well... it worked! :D
    I'm pretty sure the extra 512 memory stick was the problem, that would explain why it was being inconsistent with its type of failures before. I'm going to reinstall it later and run memtest86 and try and see if i can get it to work at all somehow without causing problems, cuz 1.5 was already low enough...
    DryHeat, yeah it was with SP2 but I got it installed now so no worries
    Thanks a lot!

  • I'm having problems with the hyper-links and footer

    I'm having problems with the hyper-links (they flicker and also highlight other text on the page) and also the footer space goes on forever in preview site mode, even though I have made it small in the master and homepage and subsequent pages.  This only happened after I loaded a MUSE file into the current version of Muse CC as it runs upgrades on the imported Muse file.  Please Help Me Adobe Community.

    Hi Brad,
    I'll do what you mentioned about republishing all files, what Adobe Muse seems to to is run and upgrade when you open an older version .muse file, optimising it.
    Hopefully republishing it rather than syncing with the new version might help.  I'll do this Tuesday evening when I am back from my client meeting.
    I was thinking, is there a way of me rolling back to a previous version of Adobe MUSE CC ?  I'm using build Adobe Muse CC (2014.3) but I wish to roll back to Adobe Muse CC (2014.1), as this was the version the site was working properly with.
    Thanks Brad.

  • I am having problems with my computor freezing and going black screen and then coming on again,

    i have a windows 7 hp elite and am having problems with it freezing and going black, was doing it on the zynga games, not it is with everything.   i have cleaned, defraged, and shredded files, etc and have all the updates and even had it restored, but nothing is working.  any ideas?

    remove power cord, take battery out, hold the start button for 4 min, put battery back and press start lightly and hit f8 immediately severals times. it may start up right away or take several times.

  • Is anybody else having problems with iOS 7.1 and Home Sharing?

    I have two iPhone 4's - one I recently upgraded to iOS 7.1 and the other running 6.3.1. The phone upgraded to 7.1 will not connect to my (rather large iTunes library) on my Mac Mini (running 10.9.2). The 7.1 phone does see the library - and attempts to connect - but the progress indicator stops at about 50%.
    I've tried de-activating sharing on the Mini and then re-activating. I've tried restoring the 7.1 phone from a back-up. No change.
    Also - now the 6.3 phone will connect to the library - but the playlists have no entries and 99% of the library is missing.
    Before the upgrade - the phone now running 7.1 never had any issues with Home Sharing.
    Anyone else out there having issues with iOS 7.1 and Home Sharing?

    I've had no problems with Facebook on my iPhone 5 but here are a couple of suggestions.
    1. Quit Facebook like I describe then reset the iPhone. Double click the Home button to show the screen with running and recently used apps. Each app icon will have a sample page above it. Flick up on the page (not the app icon) and the page will fly away and the app icon will disappear. This quits that app. Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart.
    2. If the first thing doesn't help, quit Facebook again, delete Facebook, and reset the iPad. After the iPad restarts use the App Store app to download Facebook again.

  • HT4623 i updated my ipad with ios7 but the keyboard does not work as it should hit the letters it is slow and does not click as it should

    updated my ipad with ios7 but the keyboard does not work its slow when i hit the letters does not click did not do this until i updated anyone can help me on this to fix it

    Settings>General>Reset>Reset All Settings

  • Updated to Windows 8.1, Having Problems with Touchscree​n, Bluetooth, and Mouse

    So, I'm having a few problems that I've tried googling and even looking through all these threads about the same problems but I can't seem to find someone (HP tech OR User) with a solution.
    I have a few problems:
    1) Touchscreen doesn't work anymore
    2) Mouse pointer does not appear on screen anymore (It's not "invisible" it's just completely not there)
    3) Bluetooth file transfer from my phone (Galaxy Note 3) to laptop and vice versa does NOT work
    There are also a few things that I've already tried:
    1) Hardware and Software troubleshoot
    2) Updating drivers
    3) Removing and re-installing programs (Synaptic)
    4) Connecting to a mouse (which solves the mouse problem, but when disconnected, the moust pointer is stuck where it was last pointing)
    5) Restarting the laptop (multiple times into different modes)
    My laptop is the HP ENVY TouchSmart m6-k025dx Sleekbook (Energy Star)
    And I've only had the laptop for a few months. EVERYTHING was GREAT until I updated the stupid Windows 8.1 update. I've been sitting here for a good week now trying to figure out a way to fix this. Really about to throw this out the window.
    PLEASEEEE AND THANK YOU!

    Hello amykwon0520,
    Welcome to the HP Forums.
    I see that you've updated from Windows 8 to 8.1. That since doing so you have three primary issues with the Notebook. I will do my best to help you with this.
    I thank you for provide the amount of information you have. I do have a few questions for you to start with though.
    1) After updating to Win 8.1, did you make sure that all updates were completed? (Please check to make sure all Windows updates are completed, as well as using the HP Support Assistant to verify drive updates are completed.)
    2) The driver updates that you've complete. What driver's have you updated? Where did you do the updates from? (device manager, downloaded from online, ect..) If downloaded, was it form this page: HP ENVY TouchSmart m6-k025dx Sleekbook Drivers?
    3) Did everything work correctly prior to the updates to 8.1?
    To address the issues that you mention having since doing the update, I have a document for each one that may help you with resolve it.
    1) TouchScreen not working - Please following the troubleshooting in this document: Troubleshooting Touch Screen Issues in Windows 8.
    2) Mouse point not appearing on screen/touchpad not responding - Please following the suggestions in this document: Using and Troubleshooting the TouchPad or ClickPad (Windows 8).
    3) Bluetooth and file transfers - Please refer to this document: Using Bluetooth Devices (Windows 8).
    *Note* All documents say Windows 8, but the steps do apply to 8.1 as well.
    Try the documents for each issue and let me know if they are able to help you resolve the individual issues. Also, if you need further assistance please reply with answer to my questions above. I hope this is all able to help you out.
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • Is anyone having problems with the Health App and Withings?

    After upgrading to ios 8.1 I am still having a problem getting my Withings Health Mate data to correctly update my Healt Dashboard. The information that does show up on the different Dashboard widgets is way off. For example, I today walked 2400 steps according to Withings, but the Health Dashboard shows 10,700 steps (720,000 in smaller print on another line). It further shows my daily average at 313,000 steps! Ridiculous.
    Walking/Running distance for the days shows 22.5 miles with a daily average of 108 miles.....I'm not Barry Allen/The Flash.

    My problems with the Healt App are all over the map. The information on Withings Health Mate is totally accurate, and updates immediately.  I have their scale (since 2011) and wireless blood pressure monitor. Also, I find the heart rate senson on the iPhone 6 to work well, every time.
    This issue for me is with Apple's Health app. I get ridiculous readings on the Dashboards. For example, it shows my daily average in steps as 170,688, and miles walked at 80. Hardly! Additionally, the Dashbord widgets will disappear/reappear for no reason. I have tried switching the priority of data sources for the steps dashboard between Withings and my iPhone 6 (because it is indicated that the top source governs the dashboard info), to no avail.
    Lastly, I don't know how to interpret the infomration on the individual dashboards. On the same line as the word "Steps" there is a number, i.e. 14,272 steps, and just under it the word "Today." However, when I switch from "Day," "Week,," "Month," and "Year," those number don't change. Below the word Today is a number (which changes all the time), and at the bottom of the widget, just above the month (October now) is the number 1,149,749. Nice.
    I would like to get the Apple Watch next year, but if the Health App cannot be fixed I may not.

Maybe you are looking for

  • IPhoto no longer works with Nikon 5100 after upgrade to 10.8

    IPhoto with newly installed Mountain Lion no longer recognizes a connection to my  Nikon 5100.  The USB cable is good, as it works with  my other Macs  -- OSX versions 10.6.8 and 10.7.4, just as it did with my Imac before I upgraded to 10.8.  My Pref

  • How to increase the speed of video (avi file) using labview

    How to increase the speed of video (.avi file) using labview? I have  tried this by skiping alternate frames. also I have used  minimum time delay.Is there  any other option for which i can go? please suggest me........... 

  • ECC6 server in netweaver 2004s SLD

    Dear Experts, i installed netweaver 2004s workplace (just for testing purpose). and i want to configure the jco for webdynpro to call BAPIs in ECC6.0 system. then i found that i have to configure the SLD and to define the ECC6 server in SLD. then i f

  • I have Win7 and Mac OS versions of LR 4.x  I use both regularly.  Can I reconcile the DB?

    I have Win7 and Mac OS versions of LR 4.x  I use both regularly.  I'd like to periodically reconcile the images and databases so that at least one of the applications has a complete collection of images and DB information. Is there a recommended way

  • I'm conducting an investigation on tcode ME23N

    Hi All, I'm conducting an investigation on tcode ME23N where the user is encountering problem. when clicking the preview button in the screen, PO was displayed. when click the back button there's an information message that appears stated that "OTF e