Updated image is not continuing with the State Restore Phase
MDT 2010 Update 1
Our MDT guru quit about a month ago. I've done basic stuff here and there
But have never updated an image..
1. I deployed our current image to a Vmware workstation. Added about 200 updates. Nothing else done.
I than rebooted and logged in as local admin and ran litetouch.wsf in a command prompt.
And ran the "Sysprep and Capture image" task sequence.
This sysprep'd and imaged with no errors to the captures folder.
2. I than moved that updated image to the "Operating Systems" folder on the deployment share. Renamed the old .wim file and renamed the new one to be the same as the old one.. (Not completely sure this is the correct
way to do this) But couldn't find any info on how this is done)
I than proceeded to reimage a machine with the updated .wim.
It gets all the way to the State Restore phase and just stops. After the final reboot. I logon with the local admin account as usual and it does not continue. the Minint and _SMSTaskSequence folder are still there.. If
I let it set for hours nothing happens...
I compared the BDD.log file for both images. They seem to be identical up until the State Restore phase is supposed to start.
I see NO errors in the BDD log file...
So I am lost as in what to do to try and remedy this issue..
Info From Sharepoint
Its the new WIM that is not continuing...
I did try the import. and it did the same thing.
here is the ending of the BDD.log file
ZTIConfigure COMPLETED. Return Value = 0 ZTIConfigure 4/22/2014 12:00:53 PM 0 (0x0000)
ZTIConfigure processing completed successfully. ZTIConfigure 4/22/2014 12:00:53 PM 0 (0x0000)
Microsoft Deployment Toolkit version: 5.1.1642.01 ZTIdrivers 4/22/2014 12:00:53 PM 0 (0x0000)
The task sequencer log is located at X:\windows\TEMP\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log. ZTIdrivers 4/22/2014 12:00:53 PM 0 (0x0000)
Write all logging text to \\bimaemg1mdtx64\deploymentshare$\MININT-C1QJ4FN ZTIdrivers 4/22/2014 12:00:53 PM 0 (0x0000)
Validating connection to \\bimaemg1mdtx64\deploymentshare$\MININT-C1QJ4FN ZTIdrivers 4/22/2014 12:00:53 PM 0 (0x0000)
Already connected to server bimaemg1mdtx64 as that is where this script is running from. ZTIdrivers 4/22/2014 12:00:53 PM 0 (0x0000)
No driver copying needs to be performed during the Lite Touch postinstall phase. ZTIdrivers 4/22/2014 12:00:53 PM 0 (0x0000)
Updating downlevel OS configuration. ZTIdrivers 4/22/2014 12:00:53 PM 0 (0x0000)
Vista identified, skipping update of Device Path ZTIdrivers 4/22/2014 12:00:53 PM 0 (0x0000)
ZTIdrivers processing completed successfully. ZTIdrivers 4/22/2014 12:00:53 PM 0 (0x0000)
Microsoft Deployment Toolkit version: 5.1.1642.01 ZTINextPhase 4/22/2014 12:00:53 PM 0 (0x0000)
The task sequencer log is located at X:\windows\TEMP\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log. ZTINextPhase 4/22/2014 12:00:53 PM 0 (0x0000)
Write all logging text to \\bimaemg1mdtx64\deploymentshare$\MININT-C1QJ4FN ZTINextPhase 4/22/2014 12:00:53 PM 0 (0x0000)
Validating connection to \\bimaemg1mdtx64\deploymentshare$\MININT-C1QJ4FN ZTINextPhase 4/22/2014 12:00:53 PM 0 (0x0000)
Already connected to server bimaemg1mdtx64 as that is where this script is running from. ZTINextPhase 4/22/2014 12:00:53 PM 0 (0x0000)
Property PHASE is now = STATERESTORE ZTINextPhase 4/22/2014 12:00:53 PM 0 (0x0000)
ZTINextPhase COMPLETED. Return Value = 0 ZTINextPhase 4/22/2014 12:00:53 PM 0 (0x0000)
ZTINextPhase processing completed successfully. ZTINextPhase 4/22/2014 12:00:53 PM 0 (0x0000)
Property DestinationLogicalDrive is now = LiteTouch 4/22/2014 12:00:53 PM 0 (0x0000)
LTI initiating task sequence-requested reboot. LiteTouch 4/22/2014 12:00:53 PM 0 (0x0000)
Info From Sharepoint
Similar Messages
-
Why does image trace not align with the image?
I'm using a fully updated version of Illustrator CC 2014 to trace images that have had the background removed by the client. No matter what settings I choose, it appears the tracing result is offset slightly in both X and Y axis. See my screenshot below. I found someone who reported this problem early last year in CS6 but received no useful suggestions. I do laser cutting and want to cut around the image so this is problematic. I originally thought perhaps the image had anti-aliasing or not fully white pixels in the background, but I'm using a threshold of 254 which means anything greater than (0,0,0) should become black. So while there could be off-white pixels to the right of his head that pushes the line past where I want it, the outline should include the hair and shirt on the left which it is not.
I cannot answer the specifics, but I would guess it is a software issue because Griffin iTalk app will cooperate with the Apogee JAM on an iPod Touch 4g running iOS5. If this app can do it, then one would presume the other apps could be updated to do it also.
From last week up until yesterday, Apogee actually listed the 4G Touch as a compatible device with the JAM.
Apparently there was some confusion about Garageband now supporting iPod Touch and its functionality with JAM. -
I have been transfering photos and movies to an external hard drive and when I try and secure trash contents off my computor i get the message it will not continue In utilities the message is: SUID file syst/library/coreS has been modified and will not be repaired. Hence I cannot free up space on my computor. What can i do?
Do not worry. It is probably a permission you should ignore, but you should check that the permission appears in this site > http://support.apple.com/kb/TS1448?viewlocale=en_US&locale=en_US
-
Not clear with the statement ( A large double value with redundant D )
Hi,
I am not clear about the statment below. What does redundant D means.
*123.4E+306D// A large double value with redundant D*By default any floating-point literal in Java is a double, so the trailing D that specifies that explicitly is redundant.
-
When I got the IOS 8.2 update it did not come with the apple watch app like it said it wouldo
I went to settings and clicked on the IOS 8.2 update and when it restarted the apple watch which on the update discription said would be there wasn't there
The Apple Watch app is only on the iPhone. You can't pair a watch with a iPad even though it was included in the update.
-
HT4623 How can I get my dads old iphone to update, it will not sync with the itunes?
My dad has on old iphone and we are having troubles getting it to sync to the itunes so i can back up the phone and numbers on itunes what do i do?
Why won't it sync?
What happens when you try?
If you want help, stop being vague and provide some details. -
the headset does not work after having my iphone ios 8.0.2 updated to me is very annoying to have to be answering speakerphone is not private and can not go with the hands-free all the time
I had the same issue until I updated my apps through iTunes. I had over 100 updates, but none of them showed on my iPod. After they updated everything started syncing like it is supposed. Go to the apps library and check for updates. After everything syncs leave your iPhone/ipod/ipad connected if the spinning arrows at the top is still spinning. It means that things are still being added. If you go to settings > general > about, you will see it loading songs, videos, photos, etc. If you back out of "about" and then go back to it you will see the numbers for each one change.
-
I was updating my iphone, but my computer shut down half way through restoring my old settings. When I turned my computer back on, i tried to continue with the restore but the original backup i was trying to use wasn't there anymore, it had been replaced.
Try resetting the SMC.
MacBook and MacBook Pro with a battery you can remove
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery.
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer
To reset the SMC on newer Mac portables with a battery you cannot remove
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC. -
I have recently updated my phone and am attempting to sync it. I got the error message "iTunes could not back up the iPhone because the backup was corrupt or not compatible with the iPhone". I deleted the backup, restarted my computer, and even restored the iPhone, but continue to get the same error message. What do I need to do now?
iTunes places the iPhone backup in the following location. Navigate there & delete everything in the backup folder, but not the folder itself. You will have to turn on "Show All Hidden Files & Folders" to see it:
Mac:~/Library/Application Support/MobileSync/Backup/
Windows XP:\Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista and Windows 7:\Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\ -
Canon EOS 100D is listed as compatible in Digital Camera RAW Compatibility Update 6.01 and when I have checked for software updates there are none available. I've downloaded the Canon software, connected to my mac via the cable and followed the instructions in the manual. Sadly I just get a message saying it's not compatible with the operating system. I've tried inserting the memory card into the mac to and it doesn't seem to see it. Can anyone help please?
Camera RAW ≠ Camera driver, the RAW update is for the .CR2 canon raw image file (in your case) compatibility.
What happens when you try to import photos using Image Capture or iPhoto?
Can you take a screenshot of the error message?
I always prefer and recommend using memory card import over using the camera. -
Since Mavericks update my iPhone and iPad calendars
are NOT syncing with the calendar on my MacBook Pro.
I used to use iTunes but don't see the options now.
Does anyone know how to set up a sync.?I have temporarily solved the sync problem by using an older MBAir running snow leopard, I exported
both calendar and contacts and imported them in the MBA and synced normally.
Since I'm not about to send my data on the cloud, or setup a server to just sync my iphone,
I think this is a good workaround ! BTW I stopped updating my contacts and calendar on the MB, I only
update the iphone until a permanent solution is found !
And they better come up with one soon, because I'll just switch to an Android phone and Ubuntu linux for my MBP, Apple should make our lives easier, not harder !
I'm sure Samsung is having a ball ever since the sync issue was made public !
Hopefully Apple is listening and will make things right again ! -
I have the current version of itunes, but when I go to update my ipod, I am getting an error message that says that it could not back up because the backup was corrupt or not compatible with the iPod. This is the first time trying to backup the iPod. I have authorized my computer. Still no luck.
Go to iTunes>Preferences>Devices and select the iPod backjp and click on delete and try again.
Also
- Reboot the computer
- Try another cable
- Try another USB port -
I tried to update my iPhone4's, but get the following error message: iTunes could not back up the iphone "iPhoneName" because the backup was corrupt or not compatible with the iphone. Delete the backup for this iphone, then try again.
The solution will be found here, select your computer type and software.
http://support.apple.com/kb/TS2529 -
I have an iPhone with iOS 7.1.1 and am trying to update to 7.1.2, but get an error message "iTunes could not back up the iPhone because the backup was corrupt or not compatible with the iPhone"
Assuming you are using the current version of iTunes (11,2,2), open iTunes, click "Preferences" under the leftmost entry on iTunes' menu, then choose "Devices".
Find the iPhone's backup there, highlight it, and choose "Delete Backup". -
"iTunes could not backup the iPhone because the backup was corrupt or not compatible with the iPhone."
Anybody else experienced this when trying to update iPhone software to 5.1.1???
How have you resolved this issue.
Any help anyone can give will be warmly received!!
Thanks,
R.
London.Hello jsachi,
The article linked below details a number of troubleshooting steps that can help get a backup created in iTunes.
iOS: If you can't back up or restore from a backup in iTunes
http://support.apple.com/kb/TS2529
Cheers,
Allen
Maybe you are looking for
-
WIN 8.1 and MICROSOFT LIFECAM HD-3000 compatibilty - Preview screen "blacked-out"
It seems that there are hundreds of Users with Webcam issues since WIN 8.1 has been downloaded. I have trawled sites and Forums for procedures to ensure that my LIFECAM HD-3000 will work otherwise it a waste of £14.99. No solution has worked. Drivers
-
Help! Data lost on external hard drive.
Well, I will explain what I did first. I have an external hard drive. It has 4 FAT32 partitions, the 1st and 3rd ones are empty, the 2nd and 4th ones has about 10G data on each. I wanted to make a minimum backup of the current Tiger system with Super
-
Running thread in background.
I am running a program from within a terminal and when a certain action is performed I want a new thread to start running in the background. However when I do thread.run() it still runs in the terminal. I know if you want to run a program in the back
-
I cannot scroll photos with 2 finger swipe
i cannot perform the 2 finger scroll while viewing pictures using iphoto.
-
MacBook Pro 13 or 13.3?
Hi, I am a new macbook pro user. I was just wandering if Macbook pro 13" is the same as Macbook 13.3". And also my friends on mins have dents on the Macbook pro, Would Apple void the warrenty if lets say i have a dented macbook Pro ?