Updated IPad 2 to IOS 7.1.1 and IPad 2 flashed

I updated IPad with latest IOS 7.1.1 and it blanked out on me and had to save everything on computer,after it had shown me connection and iTunes symbol on screen.Transfered everything on to my computer and then it is asked me to activate IPad2 again from the begining and to input the first code I ever used when creating it.It says that my email address is not acceptable(I do not know how this happened since I only had 1 to begin with) and also I do not know how to recover this...

If the unit has NEVER been jailbroke, first try a system reset.  It cures many ills and it's quick, easy and harmless...  Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, if you have IOS-7, read this.

Similar Messages

  • HT1386 I have a brand new ipad with iOS 6.1.3 and an imac with OS 10.5.8. I cannot update my OS on this machine, but want to sync the new ipad. What can I do?

    I have a brand new ipad with iOS 6.1.3 and an imac with OS 10.5.8. I cannot update my OS on this machine, but want to sync the new ipad. What can I do?

    If it's an Intel Mac, you can upgrade it to Mac OS X 10.6.8.
    If it's a PowerPC Mac, you need to use these instructions and/or iTunes Match to put content on the iPad.
    (83068)

  • I tried to update my ipad from ios 4 to 5 and now it won't connect to my computer - it is fully restored and can't connect - getting an error message. Help!

    I just recently tried to update my ipad from ios 4 to 5 and now I am getting an error message when I try to connect it to the computer so that I can download all of my apps, etc. please help! Error message says iTunes could not connect to this iPad. An unknown error occurred (oxE8000000A).
    Help!

    Syncing with iTunes on a Mac or PC requires:
    Mac: OS X v10.6.8 or later
    PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
    iTunes 10.7 or later (free download from www.apple.com/nz/itunes/download)

  • How do I sync my Calendar across my MacBook Pro OS X 10.9.5, iPhone iOS 8.1.3 and iPad iOS 8.1.3 ?  I Sync my devices regularly, but recently the Calendar updates are not appearing across my devices ?

    How do I sync my Calendar across my MacBook Pro OS X 10.9.5, iPhone iOS 8.1.3 and iPad iOS 8.1.3.
    I sync my devices regularly, but recently the Calendar is not updating across my devices.

    heelp

  • Hey i have ios 4.3.5 on my ipad and i wanna update it to ios 5.1.1 and ive downloaded the file made by apple but every time i try to update it to ios 5.1.1 it allways says error 3194. can anyone help?

    hey i have ios 4.3.5 on my ipad and i wanna update it to ios 5.1.1 and ive downloaded the file made by apple but every time i try to update it to ios 5.1.1 it allways says error 3194. can anyone help?

    alanangert1 wrote:
    ... every time i try to update it to ios 5.1.1 it allways says error 3194. ...
    3194  = http://support.apple.com/kb/ts4451
    If the above Support Article does not resolve it... then you have a problem.
    Perhaps a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is required..
    Be sure to make an appointment first...
    Note:
    That error message may be indicative of the Device being Hacked / jailbroken.... If this is the case then you are on your own.
    Unauthorized modification of iOS...
    http://support.apple.com/kb/HT3743

  • HT201335 Since I updated iOS on my iphon4s and iPad mini i cant get mirroring to work via vga cable

    Since I updated iOS on my iphon4s and iPad mini i cant get mirroring via my vga-cabel to my smartboard projector to word anymore. I used to be able to swipe right twice to chose mirroring via my Apple cable. Why doesn't it work anymore?
    All the threads I can find on the subject talks about using appletv but I need to connect via cable! It used to work (before ios7).
    Sincerely Bent F

    The article from which the issue was posted clearly explains how to access AirPlay in iOS7.
    Granted, what is being attempted has nothing to do with AirPlay or Mirroring.
    The feature that you're looking for is in Control Center... assuming the cable actually works.  If it does not work, the feature will not be accessible.

  • IPad showed iOS notification I declined and it still showed one. All of the sudden after a month it updated?

    iPad showed iOS notification I declined and it still showed one. All of the sudden after a month it updated?

    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    If you can’t update or restore your iOS device
    http://support.apple.com/kb/ht1808
     Cheers, Tom

  • HT1386 Unable to update older ipad (model MB292LL) to ios 6 - when checking for update msg says ios 5.1.1 and is already up to date.

    Unable to update older ipad (model MB292LL) to ios 6 - when checking for update msg says ios 5.1.1 and is already up to date.

    That is correct.
    You have an original iPad.
    iOS 5.1.1 is the end of the line - that is the latest iOS that model can use.

  • I'm trying to update my iPad to iOS 8.1.2 and it won't update?

    I'm trying to update my iPad to iOS 8.1.2 and it won't update?

    Is it perhaps downloading the update?   
    Have you tried rebooting the iPad?  Hold down the home and power/sleep buttons for 10 to 15 seconds or until the Apple logo appears. This should reboot the iPad.  Then try the update again.
    If all else fails, you can try to update through iTunes on a computer.

  • I updated my iPad 4 iOS 8.0.2 and the camera does not work, ... Please help

    I updated my iPad 4 iOS 8.0.2 and the camera does not work and hangs and unconnected, .... Please help me in this question,... Thanks in advance

    You're welcome, but I didn't do anything. Try closing the camera app completely and reset your iPad and maybe that will help.
    In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • I update my iPad to iOS 7.1.2 and then I cannot rotate screen.

    I just update my iPad to iOS 7.1.2 and then I cannot rotate screen. I'm sure I did not lock orientation.
    i Look through the 'setting' and restart my device but they doesn't work.
    This update is so terrible! I didn't have that problem before!

    iPhone, iPad or iPod screen will not rotate, fix
    http://appletoolbox.com/2013/03/iphone-ipad-or-ipod-screen-will-not-rotate-fix/
    iOS Screen Does Not Rotate
    http://support.apple.com/kb/ts3805
     Cheers, Tom

  • HT1296 I updated iPad to iOS 7.1.1 and my iMac to OSX 10.9.2. I am unable to some of sync music in the play list. HELP!!!

    I updated iPad to iOS 7.1.1 and my iMac to OSX 10.9.2. I am unable sync some of the songs in the play list and or albums. HELP!!!

    I updated iPad to iOS 7.1.1 and my iMac to OSX 10.9.2. I am unable sync some of the songs in the play list and or albums. HELP!!!

  • Hi, My iPad has iOS 5.1.1 and is not updating automatically. Yes I reconfigured as it came yesterday

    Hi, My iPad has iOS 5.1.1 and is not updating automatically. Yes I reconfigured as it came yesterday

    I thought about that, but where he states that "Yes I reconfigured as it came yesterday," I assumed that this was a new iPad 2 that he just received yesterday. The tagline shows iPad 2, FWIW.
    However, your assumption may be probably is correct.

  • HT4972 I have iPad running iOS 5.1.1 and when i try to update to the latest iOS with iTunes I get "iOS 5.1.1 Your software is up to date"

    I have iPad running iOS 5.1.1 and when I try to update to the latest iOS with iTunes I get "iOS 5.1.1 Your software is up to date"
    It looks like some Apps I was using are no longer working properly under iOS 5.1.1

    Sorry, the original iPad can only be updated to IOS 5.1.1

  • IPhone 4s iOS 6.0.1 and iPad 1st gen. iOS 5.0. What do I need to do?

    Wifi connection problem between iPhone 4s iOS 6.0.1 and iPad 1st gen. iOS 5.0. What do I need to do? I've reset the network on each and nothing. Please help.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • HT201210 please,I need your help ! I was updating my iphone ios to ios4.2 and then problems begins when it shows that it needs to restore the factory software to I was trying to restore ,but that didn't happen it begins but then it shows unknown error 101

    please,I need your help ! I was updating my iphone ios to ios4.2 and then problems begins when it shows that it needs to restore the factory software to I was trying to restore ,but that didn't happen it begins restoring but then it shows unknown error 1015

    Stop being impatient.
    From the article that the question was posted from:
    Errors related to downgrading iOS
    The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed.   Installing an older version of iOS over a newer version is not supported.
    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
    You cannot downgrade.
    If you have a 3GS, you can only install iOS 6.1.3 which is the current version of iOS for the device.

Maybe you are looking for

  • How can I convert an xls file to a txt file

    I would like to know How I can convert an xls file to a txt file.

  • Images Missing in Detail Layout? Please Help!

    So for some reason the details section of my web apps will not show images, and I cannot figure out why. Images were showing up before, but when I imported the items from a spreadsheet, the images went missing! The image files (.jpg) are still in the

  • Can't configure counter units to give Ticks

    Hello, What I need is: For my application, I have an external signal pulsing at a random frequency and I want to count the number of pulses between 2 another external signals. What I use is: NI-DAQmx library version 7.1.0f1 NI 6624 counter/timers boa

  • Conditional Formula based on Print Number

    Post Author: DigYerOwnHole CA Forum: Formula Hi,Does CR have a way to base formulae on the print copies?Here's my situation:Using Crystal to print off sales invoices. The invoices have to be printed three times. On the first copy the invoice has to s

  • Selecting solid colors with Eyedropper

    Where is the option to have the Eyedropper only select solid colors and not multiple colors when sampling colors? I select the Eyedropper tool and do not see any options for this in the control panel. I only have options for Sample Size, which layers