Updated iPad to ios5, now getting error message
Just updated iPad to ios5 today. Now when plugging into my wired Apple iPad Keyboard Dock, I get the "accessory not supported for charging" message. Advice please.
First of all: before you upgrade, always make a backup of your device in iTunes!
The following happens when upgrading to iOS 5 (this is different from previous system upgrades!):
The installer creates automatically a restore file
Then a clean system is installed on your device, all your data will be removed. Don't panic, this will be ok later on.
When the os is updated you get a few configuration questions (i.e. language settings).
At one point you're given a choice:
configure device as a new device
restore from iCloud
restore from iTunes
Unless you want to start all over, choose the third option.
All your settings will be restored at first and your device will restart.
Now comes the tricky bit: After restart your device will work fine as if the process is finished. i.e. you can send and recieve mails. At this point you will not see the apps you had installed, also you're photo's and movies will not be on your device. (I was fooled buy this one at first too)
Do not disconnect your device or quit iTunes! In the background iTunes is still restoring the rest of your data. (Switch to iTunes and you'll see the progress.) This can take some time, depending on how much apps you had installed. One by one you'll see apps appearing on your device. You can't use the untill the whole restore is finished.
When all apps are back, your photo's and video's will be restored.
So please be patient. It took me more than an hour to get everything back in place.
The only small annoyance: there are new Apple-apps added to the homescreen. They're 'pushed' to the second screen by your own homescreen apps, leaving your second screen almost empty. Now you only have to rearrange the apps on the second screen.
If all turns out bad, because you unplugged your device too early, go back to your restore file you made yourself before upgrade. (You did do that, didn't you?) and start the process all over.
Similar Messages
-
New MacPro 10.9.4 purchased three weeks ago included Keynote. App worked fine. New update for Keynote was released August 21. Just downloaded the 6.2.2 update. Tried to launch app and now get error message "You can’t open the application “Keynote.app” because PowerPC applications are no longer supported." Confused as to why it worked prior to update. Nothing else has changed. No issues with recent iMovie, Pages or Numbers updates. Any ideas?
I tested this:
Reinstalled Aperture 3.1 from the Trial Installer.
In some way it seems to be working. But the whole thing is a scary Chimera.
It can create an Aperture library. I can import and edit images, even in Graphic Converter ias an external editor.
But the Media Browser does not show the aperture Library that I created.
The versioning is inconsistent. The library appears as an Aperture 3.4 library in the Finder. Aperture 3.5 seems to be able to read this library and to upgrade it to 3.5
The Applications folder is showing the application as version 3.4 and as compatible. Spotlight is showing it as illegal.
When opening the chimera Aperture, I see plenty of warnings in the Console window:
An Aperture "Hang" report
xpcproxy assertion failed
com.apple.IconServiceAgent: main failed to composite image
quicklookd: Warning
and more ... the hang was critical. I had to force quit Aperture more than once.
So be careful. I would not trust any important Aperture library to this patched application, without testing thoroughly. Be careful with your precious photos. -
Updating iTunes 12.1 and get error message "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll". What went wrong and how to resolve this?
Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2 -
trying to update apps on iphone and getting error message, there is not enough available local storage to download these items. you can manage your local device storage usage in settings. What am I to do?
The storage you purchased is in the cloud, and doesn't do anything with your pad. Your problem is simply that you have too much content on your pad. Go to settings, general, usage, and it will show you how much space you have avaliable on your pad. If you let the screen sit for a while, all the apps will be displayed, and you can see how much stuff you have associated with each.
You have to no option but to delete some of the content on your pad. Videos, comics, pitcures and some music files use a lot of space. The cloud allows you to leave stuff there, so you can get it when you need it. -
When downloading Iphone software update (version 4.0), I get error message
When downloading Iphone software update (version 4.0), I get error message (stopped err = -3259). Is there a solution for this???
Did anyone solve this?
I'm still having this issue. I also had the same issue when trying to download a large update for an app (43MB). I can download and install smaller udpates but I can't even download the large updates. I've checked all of my firewall settings and they are fine. I've turned off the firewall when trying to download the update and it still does not work. It just keeps saying that my network connection timed out.
I'm not at the stage where I can't install new apps because it requires the latest OS version on my iphone which I can't get! -
SSRS 2008 Created Commssion Report, now getting error message when I run this ( need Help)
in SSRS 2008 2 years ago created Commission with sub reports added, it was working fine, some how started to get error
message when we entered some invoice # see below screen shot of error message
but same time if I enter different invoice # it process the report without any error message , donot understand the problem
what's causing this issue, I have looked each sub report,
can some one suggest any idea,
I have spent hrs to figure it out, no luck so far.
thanks in advance
see the 2nd screen shot with report process
any help will be greatly appreciatedHi Wendy
thanks for your reply
I tried creating new report , I have 1 main report and 3 sub report on this
on main report when I enter some invoice# and accountnum data shows up with no problem,
but same time if I enter different invoice# and accountnum , there is no data return on same query, I have checked my query so many times, donot understand this issue, what's causing this problem, since all the data pulling from same tables, why its
not pulling for some invoices,
other strange thing , I created this report , year ago, there was no problem until now,
all of the sudden this problem just shows up,'
I am not that expert in sql , can I really use advise
see below by query , if you can tell me what's wrong with my query I will be really greatfull I have spend so much time to figure it out, but so far no luck
SELECT VENDTRANS.DATAAREAID, SALESTABLE.SALESID, VENDTRANS.VOUCHER, SALESTABLE.SALESTYPE, SALESTABLE.SALESSTATUS, VENDTRANS.TRANSDATE,
CUSTINVOICEJOUR.INVOICEAMOUNT, VENDTRANS.INVOICE, VENDTRANS.PAYMMODE, VENDTRANS.ACCOUNTNUM, VENDTRANS.TRANSTYPE,
VENDTRANS.LASTSETTLEVOUCHER, VENDTRANS.TXT, CUSTINVOICEJOUR.INVOICEACCOUNT, CUSTINVOICEJOUR.INVOICINGNAME,
VENDTRANS.LASTSETTLEDATE, LEDGERJOURNALTRANS.ACCOUNTTYPE, LEDGERJOURNALTRANS.AMOUNTCURCREDIT, LEDGERJOURNALTRANS.LINENUM,
CUSTINVOICETRANS.INVOICEDATE
FROM SALESTABLE INNER JOIN
CUSTINVOICETRANS ON SALESTABLE.DATAAREAID = CUSTINVOICETRANS.DATAAREAID AND SALESTABLE.SALESID = CUSTINVOICETRANS.SALESID
INNER JOIN
CUSTINVOICEJOUR ON CUSTINVOICETRANS.INVOICEID = CUSTINVOICEJOUR.INVOICEID AND CUSTINVOICETRANS.SALESID = CUSTINVOICEJOUR.SALESID
AND
CUSTINVOICETRANS.INVOICEDATE = CUSTINVOICEJOUR.INVOICEDATE INNER JOIN
VENDTRANS ON CUSTINVOICETRANS.INVOICEID = VENDTRANS.INVOICE AND CUSTINVOICETRANS.DATAAREAID = VENDTRANS.DATAAREAID
AND
CUSTINVOICEJOUR.DATAAREAID = VENDTRANS.DATAAREAID AND CUSTINVOICEJOUR.INVOICEDATE = VENDTRANS.TRANSDATE INNER JOIN
LEDGERJOURNALTRANS ON VENDTRANS.DATAAREAID = LEDGERJOURNALTRANS.DATAAREAID AND
VENDTRANS.ACCOUNTNUM = LEDGERJOURNALTRANS.ACCOUNTNUM AND CUSTINVOICETRANS.LINENUM = LEDGERJOURNALTRANS.LINENUM AND
VENDTRANS.INVOICE = LEDGERJOURNALTRANS.INVOICE AND VENDTRANS.VOUCHER = LEDGERJOURNALTRANS.VOUCHER AND
VENDTRANS.PAYMMODE = LEDGERJOURNALTRANS.PAYMMODE AND VENDTRANS.TRANSDATE = LEDGERJOURNALTRANS.TRANSDATE
WHERE (VENDTRANS.DATAAREAID = N'AR1') AND (SALESTABLE.SALESTYPE = 3) AND (SALESTABLE.SALESSTATUS = 3) AND (VENDTRANS.ACCOUNTNUM = @Accountnum)
AND (VENDTRANS.INVOICE = @Invoice) AND (LEDGERJOURNALTRANS.ACCOUNTTYPE = 2) -
When selecting "Updates I get error message "Operation couldn't be completed. (NSURLErrordomain error-1012".
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
Unable to update to IOS 5 and get error message 9006
I am unable to update to IOS 5, every time I try I get error message 9006.
See if this page helps : http://support.apple.com/kb/TS3694#error9006
-
I down loaded latest version and get error message when I launch it. Error message is entitled XUL Runner and says - Error: Platform version 1.9.2.12 is not compatible with miniversion >= 1.9.2.10 maxversion <= 1.9.2.19 and it won't launch. I can launch if I use Run Outside of Sandbox option, but I cannot navigate my home page on yahoo. What happened? Please send fix. Thanks, [email protected]
Do a clean (re)install:
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox. -
I have updated to the lastest OS on my IPad3. No problem there. Then found I could no longer access my Itunes as there was a message 'Cannot be used as it requires version 10.6.3 or later. Go to ... and download'. I have tried four times and it won't work. I get another message saying I must sign in as administrator or contact my system administrator. I am the only one who uses this PC and have no idea what my administrator password is. Now I cannot use ITunes. Please help if you can. Thank you. Eileen Frost
Many thanks diesel. I cannot remember ever having an administrator password. Looks like I shall have to do a restore on my PC and not bother with the updates. Or maybe I could find my password from somewhere ? When I went into control panel I found a box with administrator and my name and it said password protected so I must have had one at some time. Any ideas on how I could find it ? Many thanks anyway. I always use a password to sign on but obviously that is not it. Eileen
-
I have made numerous attempt to download the ios6 on my iPad 3 and it starts but then stops and gives me an error message. Someone suggested that it could be done on my main computer in iTunes but that has to be updated and I don't know how to tell if mine has been updated or not. How do I get this installed? Anyone please help?
sunshinecowgill wrote:
We have three operational computers, one does not have iTunes on it. Since Apple is saying I have more than 5 authorized computers, and I can't imagine what they are, I am afraid to deauthorize all my computers. See what I mean? I just wanted to ask the question about how I can find out WHICH computers Apple thinks I have authorized, so I can decide if it's safe to deauthorize them all or not.
You could have more 5 computers authorized if you ever, for example, reformatted a hard drive or replaced a hard drive without deauthorizing the computer first. Apple's system would see that as a different computer, even though you don't. There's nothing to be afraid of in deauthorizing everything and the reauthorizing what you actually have. You won't lose any data. Mistimp is correct, they can't tell you which computers are authorized. -
I have a PC with windows 8.1. My itunes folder is stored on external drive. I haven't used itunes for a while. I got a message to update to itunes 11.3.1. I got error message that "registry settings used by itunes for importing and burning CD's/DVD's has stopped working" I uninstalled itunes and attempted to reinstall. Now i get message" error occurred during installation before itunes could be configured" How do I fix this.
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
Cannot update to iTunes 8.2 - get error message, please help???
I have Windows Vista. When I try to update to iTunes 8.2 (which I need for the new iPhone 3Gs I bought yesterday), I get this error message:
"Errors Occurred while installing the updates. If the problem persists, choose 'Tools > Download Only' and try installing manually"
I've read a lot of the posts and tried 'repairing' the Apple Software Updater, and that doesn't work.
Can someone point me in the right direction?? Any help would be greatly appreciated!I am in the same boat.
I originally had the same error. So I tried the following unsuccessfully:
- Download Only, several times and on 2 different computers, one with XP and one with Vista o/s
- Downloading from the Apple site, several times over the last 3-4 days and each time it gets to a different % downloaded and then stops and after a while returns an error.
- I've tried uninstalling iTunes and Quicktime
- I've tried clear the cache, delete all cookies etc.
I upgraded my phone using a friends computer and now I can't connect to iTunes at all as it is not compatible (and the computer I uninstalled it from I can't download it to reinstall.
Not sure what else to try. A friend warned me that iTunes was problematic and frustrating to use, but I bought an iPhone anyway and now understand what they mean! -
Can't update OS to latest version - get error message
I was getting some advice/suggestions for this problem (see below) from the imac section of Communities, and after several attempts did not work, a contributor suggested posting to the iphone forum. ( I don't know how to cross link)
Problem:
With my 2 yr old macbook, I cannot update my recently purchased iphone 4 when an update is available. I get message: "...device isn't eligble for requested rebuild." I have worked with Apple store Genius bar staff 4 times with no sucess. Latest attempt was to erase HD, reinstall OS X, and only reinstall itunesin orde to test the update feature. In this scenario, with only itunes on the macbook, the update is successful. However, after I drag and dropped many, but not all, of my programs and files from the saved data on external HD back onto the macbook, and tried an update on a different iphone 4 (in our family plan), same problem. So I guess somewhere in what I transferred back onto the macbook is a bad file. I suppose I could go through the tedious process of transferring one program/file at a time onto the macbook, then trying the update again, but I can't do an update after each transfer because there is no new update to download, as they come out only every so often.
Is there a program that can scan the external HD to find bad/corrupted files? I have Spring cleaning and Drive Genius, neither of which seem to have the features to do such a scan (they do have disk scan, which I have run, along with Apple's Tech Tool, and all such scan operations have show no problems)
(to complicate this, this apparent bad file on this macbook likely came from my white intel based iMac. I first discovered this "updating of the iphone 4 problem" on the imac. When we bought the macbook, we bought one to one and had the Apple store do a complete transfer from the imac to the macbook in its first time set up. I purchased the iphone 4 in Sep 2010 and first tried an update in Nov 2010, which failed. I have been back to the Apple Genius bar 5 times since then with this problem. During one of those visits, Genius suggested trying to do just the update of my iphone 4 from the macbook, and that is when we discovered the macbook had the same problem. So this bad file likely was transferred to the macbook in that initial set up transfer. Furthermore, this macbook is still under AppleCare, yet that does not seem to mean anything to the Genius Bar. Tomorrow I will call applecare about this, but in the meantime, if anyone out there has a clue, I'm much obliged.
If this works, here is screen shot of the error message:
file:///Users/imac/Desktop/Screen%20shot%202011-07-18%20at%203.21.36%20PM.png
One suggestion was to do a safe boot, then try. Same problem
Another was to provide the contributor a cut and paste of teh Console activity lines of the time this happened. I did that and found an old version of Mozy still trying to do something. I fixed that , shut down, started, tried again, same problem.
Any ideas are appreciated. ThanksSorry to hear of your woes too. So, do you even get to the point where an error message box appears that states ... isn't eligible for requested rebuild...", or some other wording, (with a "more info" tab that takes you to an apple.com help screen)
-
I started the update for IOS 7 and now I am getting a message with a charger pointing to I Tunes, I try to turn my phone off and the same message comes up. Not sure if this is part of the updating process, or if my phone is damaged. Has anyone out there experienced the same problem before, and if so, how did you fix it?
AmandaMacDonald wrote:
..I am getting a message with a charger pointing to I Tunes, ...
You are being asked to connect to iTunes on the computer you usually Sync with.
Maybe you are looking for
-
Can no longer send mail; it sits in my outbox and goes nowhere!
Last night, I used a program from SBC to set up my POP account through that server. For whatever reason, emails now appear in the outbox but never seem to be sent. I receive mail. Connection Doctor was used; no problems. All accounts look the exact s
-
I have installed the beta version of 6.1 a month ago and now i cannot open my iphone 5 it needs regestration and when i try to register it says that it couldnt complete and i need to register in the developer what can i do now to reopen my device?
-
How to increase my JMSDestinationRuntimeMBeanConsumers Current ?
How to increase my JMSDestinationRuntimeMBean Consumers Current , I see JMSDestinationRuntimeMBean's Consumer current and Consumers High is 16 i need to increase this so that my messages are been accessed by more consumers in parallel and increas
-
How to Use Same Asset Number with Different Sub-number
Hi We want to sell some assets and buy them back on lease. We want to use same Asset number with different sub-number under the same company code. This new asset will be under different Depreciation Area (Statistical). We use external numbes for asse
-
======================================================= SELECT mc.segment1 sbu, mc.segment3 ssbu, mc.segment2 bu_code, msi.inventory_item_id, msi.segment1, group_code, package_name_code, 0 onhand, 0 VALUE FROM mtl_system_items_b msi, sga_inv_item_ext