Updated iPhone 4 to iOS 6.0.1 but now I cant use my accessories
Hey guys,
Updated my iPhone 4 to iOS 6.0.1 the other day and now my alpine car stereo, belkin charger recognizes my iphone. Just get a message saying this iPhone is not supported with the accessory. Any know a work around to get it working again?
Regards,
Motion
Meant to say it doesnt recognize the iPhone anymore.
Error Message "this accessory does not support this device"
Similar Messages
-
go t-mobile and they said 2 day later you can use this iphone. But now I cant use. this phone say its lock. But t-mobile was unlock it.
fatih ozkan wrote:
...T-mobile say you must ask apple.
Apple does not Unlock phones... T-mobile is giving you the runaround... Contact T-mobile as suggested. -
please can someone tell me what to do so i can be able to use my iphone again after updating the ios 6.1.3 software i cant do anything with mt phone again apart from being able to make emergency calls. please help. at first it was a hearing problem when i recieve or make a call after the software update and now there is no way i could even do anything with it.
Is there a sim in the iPhone?
Has the iPhone been jailbroken or modified to work with other
than the original wireless provider?
If you can get that far, what does it say when you look at
Settings=>General=>About=>Carrier? -
HT4623 updated iPhone 5 to iOS 7.0.6
updated iPhone 5 to iOS 7.0.6 and now my iPhone hasn't turned on since 6:00pm EST
Hi tlogue29,
Welcome to the Support Communities!
The article below may be able to help you with this.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281?viewlocale=en_US
Cheers,
- Judy -
Updated my iPhone 4 to iOS 7.0.6 and now cannot use text/phone
I updated my iPhone 4 to iOS 7.0.6 and now I cannot use text/phone services. When attempting to access either service from the primary display the screen whites out and freezes up. Settings>Phone allows me to interface with my preference howevver tapping on Settings>Messages (or Settings>Facetime) causes the Settings function to lock up. I have to back out of Settings entirely and restart. This is seriously agrivating.
I would do a full restore in iTunes using your last backup.
-
I have an iPhone 4 with IOS 4.2.6. I recently received an iPad with IOS5.1.1. I want to update my IOS on my phone but the computer I use is no longer hooked up to the Internet. What do I need to do? Also, does my iTunes need to be updated? It is whatever was available last July. Thank you for your time and courtesy!
To update your phone requires using the latest version of iTunes, on your computer, as well as Internet access. The update to iOS 5.0 or higher is an erase/restore deal, so you not only have to make sure all of the content, currently on your phone, is on your computer and accessible, you need to update iTunes first, have Internet access, then update your phone. There is no way around this fact. You could go to an Apple store or use another computer, but you run the risk of losing all of your data it you do that.
-
I recently updated my iphone 5 to IOS 8.0.2 and now it wont turn on it just says to connect to itunes and when i do the only option it gives me is to restore iphone because it is in "recovery mode". It says it will delete all my media but i didn't do a back up and i don't want to lose my photos, what should i do? (I never used iCloud to back them up either).
If it's in recovery mode, the data is already gone. Why did you never back up your important data?
-
Decided to update iphone 4 to ios 5.1 and mid update it froze and the screen is black. Phone does not respond to any combinations of home and power buttons, when plugged into computer it does not see it is plugged in so I cannot restore or anything. Looks like the screen is on it's just unresponsive and black obviously. Has anyone had this problem? I was updating via wifi right in front of my router and my computer.
Spoke to a "senior advisor" in the Apple TV department. Her suggestions: change channel in router to minimize/eliminate wifi interference from other users; move router away from any metal - i.e., DVD player, phone modem, etc.; keep router away from wireless 2.4 gH phones, which are "notorious" for crashing wifi routers. So she confirms that the problem is one of connection to router suddenly dropping out.
My own feeling is that none of these fixes will do the trick, because it seems pretty clear that there is a hardware component here - the timing of the drops seems like an overheating issue. It takes 35-40 minutes for the box to warm up enough for the first drop; then each consecutive drop happens quicker than the one before, as it heats up more. Each time it drops, its tiny brain gets a little more scrambled; last night it finally wouldn't start up again at all.
My suggestion is that everyone who is experiencing this problem, please call Apple tech support and ask to speak to a senior advisor in the Apple TV department. Make them aware of this problem! -
I updated my iphone 4S with iOS 6.1.3 and now I cannot retreive or send my e-mails. We have an Exchange server at work. I still receive the e-mails on all my devices just fine and I can see the subject headings & a small portion of the body of the e-mail, but when I open the e-mails there is no body and it reads, "This message has not been downloaded from the server". Very aggrevating and is not helping my business at ALL!! Same has happened with both iPads we own now.
Delete then add back the exchange acct on each device.
-
Just updated iPhone 5 to iOS 7.1.2 (from some version of iOS 6), now it won't sync with iPhoto 9.4.3 on my MacBook pro (running OS 10.8.5). I plug it in and iPhoto recognizes the iPhone but only displays a 'Loading..." message next to the 'New Photos' page.
Tried it also on my older Mac Pro running Snow Leopard 10.6.8 and iPhoto 9.2.3 and same problem.
Any ideas? Already tried rebooting both devices.I have same problem but with iPhoto 9.5.1
Photos don't get to the iPhone. -
HI I updated iphone 5 to ios 8.1 but now there is many problems and i want to turn back to ios 7 . How can i do it?
Just restore the iPhone as new
Use iTunes to restore your iOS device to factory settings -
How do i restore my iphone from "no Service". I tried to update my iphone 3G TO iOS 6.0. But it got stuck and now my itunes is displaying Error message: "there is no sim card installed in the iphone you are attempting to activate" and my iphone is without service. While i am trying to activate my ihone on wifi also it doesnt saying servers are temporary unavailable try after sometime. Kindly suggest
It sounds a lot like your phone was hacked or jailbroken to unlock it prior to your trying to update it.
If that is the case, it is nowpermanently bricked. -
How do i restore my iphone from "no Service". I tried to update my iphone 3G TO iOS 6.0. But it got stuck and now my itunes is displaying Error message: "there is no sim card installed in the iphone you are attempting to activate" and my iphone is without service. While i am trying to activate my ihone on wifi also it doesnt saying servers are temporary unavailable try after sometime. Kindly suggest
tariqrehmani wrote:
How do i restore my iphone from "no Service". I tried to update my iphone 3G TO iOS 6.0. ...
The iPhone 3G is Not Compatible with iOS 6...
It also appears that your phone may have been Hacked and / or Jailbroken...
If this is the case... you are out of luck... Because...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
Why Jailbreak is Not Supported > http://support.apple.com/kb/HT3743 -
I have updated iphone 4 to iOS 6 now itunes 10.7 on windows 7 does not recognize it
Hi I have updated iphone 4 to iOS 6 and also updated itunes to 10.7, now when I connect my device via usb it does not appear in itunes. I have followed all the advice in troubleshooter including uninstalling and reinstalling itunes but it still doesn't appear. Please can anyone help with this? I am not really very tech minded so a simple solution would help!! thankyou
Thank you. I ended up performing the Restore after I did an Update, and performing the restore solved the problem----I now have a functioning iPhone with all of my data, pics, and apps on it. Fortunately I made sure that I backed up my iPhone before I tried to update to iOS6. Man, what a headache though, and it sounds like I had it easy compared to some other horror stories I've read. I won't update my iOS on my iPhone again; i've learned my lesson. It remains to be seen whether iOS6 will be worth it :-)
-
How do I update iphone 4 with ios 4.2?
How do I update iphone 4 with ios 4.2?
Do you mean that you want to update your iphone that currently has 4.2 to the newest software 4.3.2?
If so, then update it as you always do, via itunes. Click Check for updates.
If you want to upgrade to version 4.2, then you cannot as 4.3.2 is the latest.
Maybe you are looking for
-
How to get real time information about how many user are logged in and thei
I use tomcat as my server platform in Ubuntu for a war file. I know in order to get real time information about how many user are logged in, we can count how many active sessions exist by a SessionCounter code. However, I have to permit HttpSessionLi
-
Delete and replace video in iweb
I have iWeb 3.0.4 (iWeb '11 I think). I want to delete a YouTube video on my video page and replace with another YouTube video, or simply call up the YT widget and change the URL address to the video I want. I can't seem to delete the old video and w
-
How to add a push button(download) to my ALV Report to download report data
Hi, I developed a normal alv report and now i want to add a push button ex.. download in the report output and then whwnever I am clicking this download button then download functionality will work.Please don't take it as simple from my point of view
-
Why is logitech 350 usb headset not recognized by my MBP?
I have a Logitech Premium USB Headset 350 that is not recognized (at all) by my fairly new MBP, which is running OS X Lion 10.7.5. I have run all of the available software updates but the headset it still not recognized as an input or output device (
-
Is there a Windows 8 driver for HP DesignJet 750c?
I have an old DesignJet 750c printer/plotter that has been running as a network printer connected via Ethernet. It is running perfectly under Windows 7... I used the XP 64-bit driver with no problem at all. But I cannot load the same XP 64-bit driver