Updated iphone to 7.0.2 How to update itunes so it recognizes it?

I updated my iphone to 7.0.2 but now itunes doesn't recognize it, so I need to update itunes on my Mac, but can't because it requires os x 10.6.8  Can i get this update? My mac is running 10.5.8.  This is the info on my Mac:
Model Name:
MacBook
  Model Identifier:
MacBook4,1
  Processor Name:
Intel Core 2 Duo
  Processor Speed:
2.4 GHz
  Number Of Processors:
1
  Total Number Of Cores:
2
  L2 Cache:
3 MB
  Memory:
2 GB
  Bus Speed:
800 MHz
  Boot ROM Version:
MB41.00C1.B00
  SMC Version (system):
1.31f1
  Serial Number (system):
W8823ALD0P1
  Hardware UUID:
BC9E311E-3DBC-5391-B09C-DBA51CE8F123
  Sudden Motion Sensor:
  State:
Enabled
Why wouldn't Apple warn its consumers before letting them download an update on the iphone that can't be used with their itunes??? It's infuriating!!!!!

I believe you can get to OS X 10.6.8 on your Mac.  Here's how to purchase it:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
You would have to purchase Snow Leopard, then do all its software updating to get to OS X 10.6.8.  At that point, your OS X version would be almost three years behind current (which is 10.8.5).
I disagree with your assertion that Apple does not publicize which version of iTunes is required for a specific version of iOS.

Similar Messages

  • After a recent itunes version update, itunes doesn't recognize my iphone or ipad?

    after a recent itunes software update, itunes does not recognize my iphone 5 or ipad

    Hey there Laughlkw,
    It sounds lik eyou iPhone and iPad are not showing in the iTunes sidebar after a recent update. A number of issues could cause this type of behaviour, and would recommend starting with the troubleshooting from the article named:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    If the issue is not resolved, I would next re install iTunes with the following article:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/ht1923
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • My iphone is stuck in emergency call mode and itunes does not recognize my phone

    my iphone is stuck in emergency call mode and itunes does not recognize my phone

    NVM... broke down and called Apple Care.  Pressed on/off button and held it for a few minutes before pressing home button.  In recovery mode, but at least it is doing something now!

  • When my iphone 4s goes completely dead how long should it take to recognize the charger and begin to charge?

    when my iphone 4s goes completely dead how long should it take to recongize the charger and begin to charge?

    How do you know it is not charging? Do you see anything on the screen at all? Have you tried a reset? Hold the sleep/wake and home buttons until you see the Apple logo and then release. If the phone was completly dead, it may take up to 15 seconds or more for the Apple logo to appear.

  • IPOD's not UPDATING, ITUNES doesn't recognize internet logon

    I cannot update my ipod nano 1st gen. 'cause itunes doesn't recognize internet and the ipod updater. Have to say that Itunes store is available and i don't have any antivirus software installed on my mac.
    anybody will help me?please...
    i've got the 1.2 version for ipod and i couldn't download the 1.3 version.
    THANKS

    No, first of all i've got a MacBook not with dual core
    I suspect an error with the connection type 'cause at work i receive this kind of problem and at home not.
    I solved the problem with the ipod updater yesterday, at home i successfully updated it but today i get a new error message while contacting itunes server:
    I cannot process the request, an unknown error occurred on itunes server (error type -206)!
    Do you know why?may it depend by the Office server?
    thanks
    MacBook 12"   Mac OS X (10.4.8)  

  • My iphone 4s is stuck on recovery mode and itunes does not recognize it at all.

    Hi. Last night I left it updating 5.1.1 from 5.1 when I was going to bed. And at night I heard usb noise and woke up. iTunes had an error, I did not remember what is written there because I was sleepy. I think it was like 1612 error but I'm not sure.  There were an itunes logo and an usb wire on the phones screen. And I cant get rid of it. iTunes does not recognize the phone in "DFU mode" too. I need the phone today and I dont know what to do. Please help me. Sorry if my english is bad.
    itunes: last version
    os: windows 7 64 bit

    http://greggjturner.com/download.html
    This program got me out from the loop. I dont know sharing it here is legal or not. But it is the solution for this problem. However I'm still wondering why I faced a problem like that. Is an update is that hard?

  • IPhone 3GS - Snow Leopard 10.6.3 Upgrade; iTunes Won't Recognize iPhone

    I was just wondering if anyone else has encountered this problem, or something similar.
    Today I purchased Snow Leopard 10.6.3 upgrade and everything went smoothly, but when I decided to plug my iPhone in to transfer some ringtones, my iTunes wouldn't recognize my iPhone. I was thinking it was because of my software upgrade, but I followed all the instructions about this issue that Apple gives but nothing's working.
    Any suggestions?
    Thanks in advance.

    There was no separate install disk that came when I purchased my computer. I have gone into Disk Utility and hit the verify button and everything comes up ok. I don't think I've ever hit the repair disk button, though.
    The various issues include: freezing at some point while I'm working on the Internet or in mail or using Kodak; the screen 'bleeds' as I scroll through (where the image smears as I scroll); there is an occasional line that shows up on my monitor, but usually goes away if I close an app like Mail or if I restart the computer.
    I did add RAM in accordance with the instructions on the apple website and my computer was running great after that...no freezing and it was running so much faster. Prior to adding the RAM and having my drive wiped clean at the Genius Bar, it was really bad. I was constantly having to shut off the computer and turn it back on because it was constantly freezing or the screen would just go black as if it had shut off, though it was still on. They could not find anything wrong with the computer that would cause it to have those issues and that's why they decided to wipe it clean and load Leopard. Of course, that gave me a new host of issues, but it seemed to resolve once I upgraded the version of Leopard they put on.
    Should I still do the repair disk?
    And yes, the computer is working. Of course, I'm still on Leopard and not Snow Leopard...I don't know what happened with that.

  • IPhone has been syncing for 2 hrs, now iTunes doesn't recognize my phone and is "restoring iPhone from backup"

    It's been a while since I've synced with my computer (yes, I'm still on iOS 4.0). Tonight I finally synced all my music, apps, purchases, etc. Tried to import all photos into iPhoto (tried 3 times) and about a third of the way through my 3,000 files it quit on me and didn't import a single thing.
    After I did a manual backup of the phone, iTunes said it would download the file to update my iOS to 5.0. Took almost an hour to get the update file... and now iTunes no longer sees my iPhone as "Erica's iPhone," it's just a generic iPhone symbol and it says "Set up your iPhone" / "This computer has previously been synced with an iPhone or other device" / "Restore from backup" which started automatically. Am I about to lose everything on my phone?!?!?!
    Help!

    Hi galvarenga21,
    If you are having issues with an iPhone that won't start up past the grey Apple screen, you may find the following article helpful:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Regards,
    - Brenden

  • IPAD 1 problems after ios 5.1.1 update, itunes does not recognize IPAD.. I check the device manager, it identifies an unknown device (My ipad) but unable to use it.

    I am using the generation 1 IPAD.
    I recently updated my ios from ios 4 to ios 5.1.1, I did the restore after the update and all seemed fine as it was detected the first time.
    I tried connecting the IPAD again but it shows that the computer, itunes is not able to detect the IPAD.
    I checked on the device manager, it identifies an unknown device (IPAD) and says no software for the driver. I am using windows 7 on my laptop. I never had any such problem with the iso 4. Any suggestions as to how this can be solved?
    Thanks,
    Vinay

    Thank you, I tried uninstalling the device driver to reinstall again. After doing the scan for hardware changes, nothing flashes on the device manager. I dont see anything related to the IPAD or any other device for which driver shows unidentified device. It is as though the device is not being seen by the computer at all..
    I even tried flashing the home/sleep buttons together but that doesnt seem to identify any device either.
    Anything else I am missing?

  • Help (urgent, sorry) - Inaccessible iTunes songs located in SugarSync folder - how to get iTunes to re-recognize these files?

    Somehow (don't get me started) SugarSync got hold of part of my iTunes library and now I have hundreds of songs with exclamation marks next to them, which are of course unplayable.
    I have found the unplayable songs using "Locate" in iTunes:  the missing songs are all in Libary/ApplicationSupport/SugarSync/small_file folder.  They are each identified in the Finder window as "iTunes.app documents" in that folder.  The filenames look like this:  8859638_512534.!8859638_106139
    I have tried iTunes/Organize Library.  I have tried iTunes/Add to Library.  I have quit iTunes, I have rebooted.  Nothing has worked.
    How can I get iTunes to recognise these files as iTunes Music (purchased from the iTunes store), and get them back in to my iTunes library ?
    Would welcome all suggestions.  Especially as I'm supposed to have my sister's 50th birthday CD ready in 6 hours and many of the songs I chose are inaccessible :-(
    Thank you.
    iTunes 10.6.3
    Mac OSX 10.7.4

    Ok, what you should do is go to "Preferences" in iTunes, with your iPod connected, and check the option that makes the iTune s your default player and all music files defaultly the Apple format (AAC). It will automatically convert all songs to that format, and list them in your library. However, you may have to right click on them and select "Convert to AAC selection" if they won't play in iTunes... hopefully I have provided some insight...

  • Apple tv (2nd gen) froze; update; itunes doesn't recognize

    I started the new update--it seemingly froze...I didn't know what else to do but unplug it (yes to spite warnings) and now it powers up and goes to the home page, but the cursor won't move. I've tried restarting; I tried restoring it to factory settings by going and buying the micro USb cable-- but itunes cant see it. I tried every which way with the restoration, including plugging in order--powering and not powering the Apple tv, and numerous restarts of the computer.

    Same problem- though mine was recognized after troubleshooting the same way you did. I have the ATV3 though, so maybe that worked. Where I then ran into issue was updating, as everytime I try to update it via iTunes i get an error and it fails.

  • How to restore an iPhone from a specific folder that iTunes doesen't recognize as a backup but in fact it is a backup?

    Hi, I have an iphone 5 on wich I made factory reset. When I wanted to restore yesterday a backup from iTunes (22.5.2013.) in the middle of restoring there was an error saying that there is not any more space on the computer. After that I can't restore it any more with this backup - the last backup that is available is the one made couple of hours ago. BUT I searched for this backup in the App Files of my WinXP and found that backup folder with many files in there but I don't know how to make my iTunes to restore an iPhone with this specific folder - it seems that iTunes doesen't recognize this folder as a backup but in fact that is a backup.
    Thanks for help.
    Regards, Borna

    Hello olip0101,
    From the following article:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    Restore from a backup
    If you have a new iOS device, or if you need to restore your device to resolve an issue, follow these steps:
    Connect your iOS device to the computer that has your backup.
    Make sure this computer has the latest version of iTunes.
    Choose File > Devices > Restore from Back up.
    If you're using iTunes 10.7 or earlier, right-click the device from the list and choose Restore from Backup.
    Regards,
    Jeff D. 

  • My new version of iTunes won't recognize my iPhone 4

    i have a iphone 4 which has not been upgraded and itunes will not recognize the devise for backup. i want to back up the phone so that i can upgrade to a new iphone 5s.

    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X - http://support.apple.com/kb/TS1591
    Mac OS X v10.6: iOS device not recognized in iTunes after restart - http://support.apple.com/kb/TS3540
    If syncing by wifi you may need to restart your computer and try again.

  • Itunes says I need itunes 11.1 version or later on my iphone before it will recognise the iphone. How do I update itunes on my iphone or is it a computer problem?

    I have been trying to sync/back up my iphone and ipad but iTunes is saying I need to update my iphone to version 11.1 or later. I thought my phone was up to date and I can't seem to update iTunes on my phone anyway. Does anyone know how to update iTunes on my phone or is it a computer problem? I've been having problems with iTunes on my PC so I re-installed it but it's been a nightmare trying to get it to work.
    This is the message I receive says " The iphone 'iPhone' cannot be used because it requires iTunes version 11.1 or later. Go to www.itunes.com.au to download the latest version of iTunes". I get a similar one for my iPad too.
    When I go to the website I can only find the download for my PC but not the iPhone.
    Any help would be much appreciated! Thank you!

    emcg23 wrote:
    I have been trying to sync/back up my iphone and ipad but iTunes is saying I need to update my iphone to version 11.1 or later
    No, your iPhone i s telling you that you need iTunes 11.1 or greater on your computer in order to sync with the computer.
    I've been having problems with iTunes on my PC so I re-installed it but it's been a nightmare trying to get it to work.
    Then you should fix this issue with iTunes before you try to sync your iPhone to it.
    See this -> Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support

  • Will doing the software update to 6.1.2 destroy any info saved on my iPhone 4? If so how do I back up what is on there - especially the contact list?

    Will doing the software update to 6.1.2 destroy any info saved on my iPhone 4? If so how do I back up what is on there - especially the contact list?

    see the link above
    and this discussed in above
    http://support.apple.com/kb/ht1766

Maybe you are looking for

  • How to Create a Dynamic Link Oracle 10g

    Hi all, I have a requirement like i am using the below sql query in my application select * from emp@testlink;Now i have 3 users i have created the seperate link for this three users. ex: test and work and office Now if test login to pc the above cod

  • Touchscreen and trackpad won't work after installing new OS

    i want to ask why that after i upgraded my os, and during the start up when i have to scroll down the aggrements text  my trackpad and my touchscreen won't work. is that any way to solve this problem? i beg you to answer my question please. i would b

  • VC on EP

    Hi all, Which version of Visual Composer is available for NW2004 EP 6.0 sp16 installation? Do i need Win2003 + IIS + MSSQL to run VC ? Or is there any patch or plugin using which i can attach VC to my EP Server itself? And, finally , the version of V

  • How to deploy the finished app (JSF)?

    Hi Guys, may be the question is obvious, but I spent enough time fighting with this IDE, that I don't want to waste any minute more. The problem: I prepared my web-app in JSF. Now I'd like to take it outside of the environment and run on a extern ser

  • ATP Check in ECC

    Hi, In ECC, can ATP check while creating Sales Order; trigger production if stocks are not present. Will ATP check be able to confirm the dates if stock not available. Also please share what time variables does ATP ceck consider if stock is present (