Updated iPod software & all songs disappeared

I plugged my iPod 40G into my father's computer and he updated the software on my iPod. Now, none of the songs I had on my iPod show up either in iTunes or on the iPod itself. The memory shows that there is only 34.87 gigs remaining (the same amount as before the software upload). Does anyone know if my songs are still available on my iPod and if so, how can I access them now? Thanks

something similar happened to me, where my ipod still shows the same amount of storage but i cant access any music thru the ipod.
try plugging the ipod into the usb, then through "my computer" pull up the ipod, then go to "tools" and "folder options" and then click "show hidden files". then inside the ipod control there is a music folder with subfiles labeled F00 - F49. your music should be in there. now, how to get it back onto your ipod, i'm not sure. you may just need to re-load it into your ipod thru itunes (it takes a while). the problem is that you will then double the storage amount, cause it will be storing the old data and the new data.
i'm trying to figure that out right now too, if anyone knows - help us!

Similar Messages

  • Installed Itunes: New PC, Windows 7 x64, updated ipod software, click to eject ipod, PC goes to blue screen, dumps data, restarts; songs do not play correctly on ipod. IE: play a song - only first few seconds will play. Some songs play fully, some do not.

    Installed Itunes: New PC, Windows 7 x64, updated ipod software, click to eject ipod, PC goes to blue screen, dumps data, restarts; songs do not
    play correctly on ipod. IE: play a song - only first few seconds will play. Some songs play fully, some do not.

    Hi just wanted to let you know I solved most of my XP problems with my new IPOD. It won't recognise the IPOD or driver and froze and locked up and then the battery died. After hours of trying different things here is what I did. I completly closed computer down. Waited 15 minutes turned on and reloaded everything. I put the usb cable in but not hooked up to IPOD. I turned off Mcaffee (all of it). After my computer came on. I then went and closed everything I didn't need in the bottom toolbar. (taskbar). I then reloaded the software and waited. Took forever to reload and I don't know why but whatever it worked but I DID NOT HOOK UP THE IPOD LIKE IT SAID! I instead shut down the computer after loading the software and waited 5 minutes and turned it back on. I again waited and shut of mcaffee. It loaded everything fine this time and said new hard ware and drivers detected. I plugged my IPOD in and YES I WAS UP AND RUNNING (THIS IS AFTER 6 HOURS OF PLAYING WITH OTHER THINGS!) I am able to load and play, burn, watch movies, see pictures and everything your suppose too! The only thing I see different than the instructions is I left my usb cable plugged in and when it said to eject the disk I didn't. I also didn't plug in the IPOD (5th Gen) and then I shut down waited and then restarted the computer. I hope this helps others because I know the feeling of wanting to return something you paid dearly for and worked hard at saving money to buy one and it doesn't work. My only thing I dislike about apple is they didn't supply a ac adapter for the IPOD and the instructions say to plug it up when trying to charge battery. DUHHHHHH, ya can't do that if ya don't have one and stores are closed and won' open until Monday! But at least I am up and running. I just hate having to plug up IPOD to computer daily to charge the battery which only last a half a day1

  • Cannot update ipod software from version 1.0.2 to 1.0.3

    I cannot update ipod software from version 1.0.2 to 1.0.3.  The message says, "The ipod cannot be updated because it contains files that are in use by another application."  It's an ipod nano 7th generation. My Mac OS X is version 10.6.8.  What should I do?

    Temporarily disable ALL of your anitvirus/antispyware software or in your AV software turn off iPod scanning.

  • Update ipod software version 4..3.5 fails

    update ipod software version 4..3.5 fails

    Abit more information is needed so we can help you more.
    What OS are you running on
    What is the error message displayed if any,

  • Updating iTunes without updating iPod software

    If I update my iTunes to 7.6, when I plug in my iPod will it require that I update iPod software too?
    If I update my iPod I will lose the majority of my music because it will require me to factory reset (it was initialized on a PC and is still on those settings) so I don't want to be forced into that option. I'd like 7.6 though so I can rent movies.
    any help would be great!

    No, you'll have the option to update iPod software--or not. I updated to iTunes 7.6, but I still haven't updated iPod from 1.2.1 to 1.2.3.

  • Why do i keep getting error msg #1403 when updating ipod software in itunes

    why do i keep getting error msg #1403 when updating ipod software in itunes

    I Googled an found no good solutions. II would try:
    - Making sure that you have the latest version of iTunes, 10.6.
    - Disable firewall and antivirus.
    What iOS is currently on the iPod?

  • I am updating the software on my daughters IPOD touch 4th generation and it is going on 4 hours now.  I know this is not normal.  What can I do?  It synced just fine, but has been stuck on" updating ipod software for 3 hours now!

    I am updating the software on my daughters IPOD touch 4th generation and it is going on 4 hours now.  I know this is not normal.  What can I do?  It synced just fine, but has been stuck on "updating ipod software" for 3 hours now!
    She has had it for about 6 months and this is the first time we have plugged it into the computer since then.  I can not exit out of itunes either.

    If you still have the problem after retoring the iPOd to factory defaults/new iPod then The iPod is likely defective and replacement is required.  You can make an appoinment at the Genius Bar of an APple store or take it back to BestBuy if within warranty

  • I bought 3 songs from itunes and when i upgrade my iphone all songs disappeared. how do i get them back?

    i bought 3 songs from itunes and when i upgrade my iphone all songs disappeared. how do i get them back?

    Sync it the same way you got it on the device to begin with.

  • Deleted iPod Selection--all songs on iPod disappeared--help!

    I had too many songs in my library to fit on my iPod, so my iPod created a selection of songs. Then I added and deleted many songs to the library.
    However, when I plugged in my iPod so it would be updated from the revised iTunes library, nothing would happen. So I deleted the iPod selection, thinking iTunes would automatically create a new one based on the revised library. Wrong. I got the message "Songs on your iPod cannot be updated because all of the playlists no longer exist." Uh oh.
    Deleting the iPod selection wiped out my iPod, but all the songs are still in my library. How do I get all the music in my iTunes library back onto my iPod? Can't find any info about this problem in the articles. Thanks for any advice you can provide...I'm freaking out.

    See if this helps: Hudgie - iPod cannot sync because one or more playlist is missing

  • How do you fix your ipod touch when you stop it in the middle of when its updating its software. all i get is a white screen or a screen with lines running down it. please help!!

    this happened when i was updating it from ios 5.0.1 to 5.1 i had to stop it before it was done updating and now all i get is a frozen screen.

    - Try a reset:
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Then connect to computer and try to restore via iTunes.
    - If screen remains on (white, has lines etc), let the battery fully drain. After charging for an hour try the reset and restore as necessary.

  • My Nano is no working because of wrong operation of updating ipod software

    i download the recent IPOD software and try to update it to my ipod nano(1st generation). the message box shows " updating our ipod now", but suddenly, my computer is unplugged by mistake. my ipod nano is no working after that. the apple log display repeatly, but when i connect it to my computer, there is no response, and apple log still display then disapper, and repeat it for ever. so what can i do now? because there is no response when i connect my nano to computer, i can not reset, reinstall or whatever i can do. so could you please give me some advice for this problem.thanks a lot

    I have the same problem, i accidently clicked update software..and it didnt load all the way and now when i plug in the ipod nothing updates to it, everything is deleted off the i pod even though itunes has songs.. someone please help

  • After 1.2.3 update, Ipod freezes playing songs and is SLOW

    Hello, I updated my 5th Generation to 1.2.3 with Itunes at the latest level. Now the Ipod plays for awhile and then pauses for 30 seconds and then continues playing the song. It also takes about a minute for a playlist to begin playing. All worked well before 1.2.3. I've tried reset and restore. I even reformatted the Ipod (fat32 2048k) and then restored. No luck. It appears there are no useful instructions to reload 1.2.1 with the latest Itunes and Windows Vista. If an Apple person happens to read this, I sure would like to go back to 1.2.1 to see if this problem continues.

    First, for safety, do a quick diagnostic of the iPod.
    You can do this by starting a sync as usual with iTunes, then enabling Disk Use. Now, go to Utilities/Disk Utility on your desktop, and perform a diagnostic - it should take only a few seconds. Now, go back onto iTunes and Disable Disk Use (so you can take your cable out).
    As long as you have the iTunes desktop up, click Check for Updates, and then Update. (They update thee software every month.)

  • Trying to update iPod software; Connection problems.

    Okay, so I have the iPod Touch 4th Gen, and when I plugged it into my computer, iTunes said that there was a iPod software update available. I've tried several times to download the update, but every time I try the same thing happens: It only downloads a few hundred KB of it, then it stops there, and the remaining time displayed keeps going up until it shows up to 24 hours or more, and finally, an error message comes up saying it couldn't complete the request because of connection problems. (error = -3259)
    On a similar note, when downloading songs from iTunes, I constantly have to pause and resume them in order for them to fully download. Otherwise it just stops where it is.
    However, I can still connect to the store just fine, with only a very few timeouts here and there, but those are easily remedied by re-visiting the page I tried to view.
    So, clearly I have some sort of issue with my connection to iTunes. Can someone please help me?

    care to share what the other way to download it is??
    My boss has an ipad, last week he downloaded the 2 entire seasons of 24, and a season of Rescue Me with no problems at all, now he's trying to download a movie and he keeps getting this error. If those shows downloaded just fine why won't the movie download? Our Windows firewalls are disabled by Group Policy so that's not the problem... and our security software hasn't changed since last week when he successfully downloaded those shows so that shouldn't be the issue either. We don't use proxys. He's wired to the internet so it's not a wireless timing out on him issue. He's on the latest version of itunes. He's logged out of itunes store, shut down itunes, and relogged in... same problem.

  • Updated Ipod software 1.1

    Hey there,
    I am on the road for work for a period of time and do not have access to my full library of music which is on my PC at home. ( I have added some more tunes while travelling by manual update)
    If I install the new software update (ipod 1.1)on the computer I am using temporarily, will it auto-update the ipod and remove all the music I brought from home?
    Any help please?
      Windows XP Pro   30 GB video ipod

    I see complaints about the new iPod software update, and me I haven't had any problems with the update and my 60 Gig video iPod. If anything, I have notices that the menu responses seem a little faster, movie playing now only takes one click to play or pause the movie instead of two clicks and looking at the album art and rating songs seems to move slightly faster across the screen. What kind of problems are you having with the update on your iPod?

  • Ipod classic frozen after sync since I updated ipod software 1.02

    I have an iPod Classic 80G and iTunes 7.4.2(4) installed in my Macbook Pro, had about 12G music in my iTune, everything worked fine, untill yesterday I added some more songs (about 2G), when I tried to sync, iTune asked me to update iPod Classic software 1.02, I did and after sync, my iPod frozen (only apple logo on screen). I tried all 5 Rs, and even erased the drive with Disk Utility, after restore, I can copy songs from iTunes while using it as a disk, the ipod works fine, but the iPod crashs everytime finished sync. This morning I tried to sync with my girlfriend's Mac mini (she has about 8G music in her iTunes), it works no problem at all. So I am thinking the problem is with my iTunes - any help please?
    p.s My last attemp was deleting the ipoddriver.kext from extensions libary, still didn't work.

    The iPod classic not bring recognized is unrelated to iTunes Match. You should post this problem to either the iPod Classic forum https://discussions.apple.com/community/ipod/ipod_classic or the iTunes for Windows forum https://discussions.apple.com/community/itunes/itunes_for_windows. Probably the former.
    FYI it is only iOS devices that cannot be synced via USB with iTunes Match enabled.

Maybe you are looking for

  • JTable display update

    I created my own Model to sum in last line and column the values of the previous cells. Unfortunately the update is only done for either column or line. Never for both. E.g. class myTest extends DefaultTableModel{ public int getColumnCount() { return

  • SRM 7.0 PO fields edit

    Hi Guru, I am new to SRM but I have this problem. I have created a Shopping card. When I go to Buyer Professionnal, search for PO number, when I displays I want I want a specific text like 'Hello World' to show up in 'Note to Supplier' field. How can

  • FastcgiStub does not raise a new process

    Hi there. we have a perl FCGI running with Sun ONE 6.1 sp5 over Solaris10. We have a line in obj.conf like this: <Object name="fcgi.perl"> Service fn="responder-fastcgi" app-path="/usr/bin/perl" app-args="/internet/datos/WWW/cgi-bin/loginCGI/loginCGI

  • Role design: use of billing block

    Role design: use of billing block Billing block should be applied automatically after the net total hit a certain $ value. For example, any credit memo request above $1,000 would automatically get a billing block.  User ID #12345 can release a billin

  • REP-52266: The in-process Reports Server rep_myhostname failed to start

    Hi Everyone, My name is John and I've a small 10g report configuration issue which I would like to share and, hopefully, some of you might already have come across it and able to assist and guide me through it. First, I've installed Oracle Developer