Updated iPod Touch Software And Its Crazy!

Hi guys,
just purchased the latest software update for my 1G Touch. Now my perfectt player is kinda ruined. Firstly I can't play most of my video clips as I get an "cannot play video file" error. Another bug is my playlists. For some strange reasons my playlists like "Recently Added" doesnt show up in the player even when it pop ups when I connect to iTunes. What do I do?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.

Similar Messages

  • HT1923 i updated my ipod touch software and it made my ipod touch be restored. now my itunes does not sync my stuff and everything is backed up.

    i updated my ipod touch software and it made my ipod touch be restored

    Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
    Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.
    Error 50: This error (and error -50) are timeout errors. Follow the steps for errors 13 or 14 above.
    Above from:
    http://support.apple.com/kb/TS3694

  • I was halfway thru updating ipod touch software, got error 1602

    I was halfway thru updating ipod touch software, i walked away from computer and when i came back there was an error "1602" and a picture on my ipod (requesting to connect to itunes?) but WILL NOT WORK AT ALL!
    What's going on?  Seems like a lot of people are having similar problems all at the same time.

    From the article cited at the end of my post:
    Error 1602: Try the following steps to resolve this error:
    Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
    Follow the steps listed for Error 1604.
    This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    Error 1603: If you receive this error and the iOS device is not automatically placed into recovery mode, it may be necessary to do so manually. Refer to iPhone and iPod touch: Unable to restore for steps on placing iPhone into forced recovery mode. Also, remove the IPSW and attempt to restore again. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user.
    Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the USB 30-pin dock-connector cable. If the issue persists on a known-good computer, the device may need service.
    http://support.apple.com/kb/TS1275

  • My IPod touch froze and its not responding at all what can i do to fix it?

    my IPod touch froze and its not responding at all what can i do to fix it?

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • HT201441 my friend found this ipod touch 5g and its in find my ipod mode it say the ipod is currently linked up to other apple id so i want to find the owner or learn how to take that off

    my friend found this ipod touch 5g and its in find my ipod mode it say the ipod is currently linked up to other apple id so i want to find the owner or learn how to take that off

    The Apple ID is an email address. Simply email the person at that email address.
    If not successful, turn the iPod in to the police.

  • Updating iPod Touch Software Version and Apps saved game data

    When I transfer my apps from iPod touch to iTunes will it also moved the saved game data like in Zombie Cafe, Amateur  Surgeon 2 so on and so fort? Because I want to update my software version...

    No.  Transferring the app to the computer only transfers the app itself. not app data.  App dat is stored in the iPod backup that iTunes makes as the first step of the a sync and of an update.  Therefore, I would do one last sync of the iPod before restoring and ensure that the backup gets made.  You can check by going to the Devices tab in iTunes' Preferences and looking at the date of the backup.  Also, make sure your apps are in your iTunes library since the apps themselves are not in the backup but are synced to the iPod at the end of the update.

  • I cant update ipod touch software

    every time i try to update my ipod touch my laptop downloads it completely and then when its processing the file it says there was a problem downloading the update and gives me an error number of -3259.

    Fro the article listed at the bottom of my post:
    Error 2000-2009: (2001, 2002, 2005, 2006, 2009, and so on) If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. Learn how to reset the SMC. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue continues, it may be related toconflicting security software.
    http://support.apple.com/kb/TS1275

  • Help with updating Ipod Touch software

    So about a week or 2 ago I downloaded the newest version of iTunes because when I went to update the software on my Ipod Touch it said I needed the newest version of iTunes. So when I did that it said my software was up to date (even though it wasn't) and it said to check back for the next update on 10/31/10. So just a few minutes ago I opened up iTunes, plugged in my Ipod Touch, and again it said my software was up to date and now it says to check back on November 7th. Now my Ipod Touch is on 2.2.1 software and I want to get it to the newest software but Itunes won't let me do this. Does anybody possibly know why iTunes is doing this and how to fix it?

    It says that it will automatically check for updates on those dates. You can check whenever you like.
    Only 2nd gen and later can get the newest upgrade.
    You can purchase 3.1 for the 1st gen ipod touch:
    http://support.apple.com/kb/HT2052
    What model is your ipod?

  • Tried to update ipod touch software now stuck in recovery loop any ideas?

    tried to update software on brand new ipod touch but now stuck in recovery mode (displaying usb plug into itunes logo) any ideas?

    Maybe:
    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
    Next try placing in DFU mode and then restoring.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Last, try restoring on another computer.

  • Itunes wont update ipod touch software 3.1.3

    I have a 2nd generation iPod Touch running software version 2.1.2.
    I want to buy the new 3.1.3 software via iTunes. When I connect the iPod Touch to my PC and click on the device name in iTunes, I'm given option of updating to version 3.1.3. But when I click "Update" I get an alert window repeating the fact that new software is available, and asking if I want more information from the iTunes Store. When I then click "Learn More" (which is the only option other than "Cancel"), iTunes simply reloads the same status screen.
    I've also tried to buy the software update by accessing the iTunes Store via iTunes, but there is no apparent link to do so.
    I've also found Apple's link on the web(http://www.apple.com/ipodtouch/softwareupdate.html) to buy version 3.0, but clicking the link simply switches me to my iTunes application, and i repeat the same loop from above.
    Any help on this would be appreciated.

    Well, if your iPod Touch is newer that a first generation device, they you can get iOS 4.2.1. If you have a first generation device, OS v3.1.3 is the newest you can get.
    Also, as best as I can remember, iPod Touch os 3.2 was never released. the iPad shipped with OS v3.2 but the iPod Touch went from 3.1.3 to iOS 4.0 (or maybe it was 4.01)

  • HT1222 update ipod touch software on a different computer

    My internet connection is slow. Can I upgrade my ipod touch on a different computer that I don't normally connect to?

    Plug it in and sync it.  it will erase the current content and replace with content of the new computer.
    You need to copy everything from the old computer, or your backup copy of the old computer, to the new one.

  • Do not update IPOD Touch Software!!!!!!!!

    I have used the software updat and has mucked my IPOD up, the first time I did it, it failed saying 'The ipod "DavesIpod" could not be updated. An unknown error occurred (1602)
    So I had to do a restore & update, this did not help
    It fails everytime
    I am running Vista Utimate and I have even tried to run both itunes helper and itunes as admin (Run as adminstrator)
    The new error is The ipod "ipod" could not be restored. An unknown error occurred (6)
    Please help
    If I cant fix it I will take it back and want a exchange. Which I would want a 38 week and 16GB instead of 8GB

    Just finished a 40 minute restore to my touch after installing the update. Is this what we can expect from now on each time Apple tries to stay ahead of the application hackers?
    For crying out loud, they put OS X on here, so is it too much to ask for them to provide apps to use with it? If individual developers can create programs for the touch/iphone so fast, is it unreasonable to ask apple to do the same so we don't have to go around them?
    heck charge me for apps, I will pay for them. Would rather spend my money on small apps rather than spend my time restoring!

  • Why is update iPod Touch software is taking hours

    The download took over an hour, but that could easily be a slow connection.  Once it got to the update, iTunes displayed a progress bar which stopped at about 50% and the iPod displayed a progress bar which stopped at about 20%.  It has been this way for a couple of hours.  Why?  What can I do to correct this?

    You shouldn't have any major problems after an upgrade. 3.x firmware introduced some new features so some things you were used to will operate differently. WiFi may act differently but any problems you see are pretty easy to fix (usually caused by dated router firmware).
    The worst that can go wrong is a unresponsive iPod. So don't do anything to interrupt the process once it starts. Shut down unneeded apps so you have lots of ram and let the upgrade do it's thing.
    The reason you need to shut down your anti-virus is that it could interfere with the download of the firmware image. The reason you need to shut down your firewall is that the firmware update needs to contact the Apple servers during the upgrade.

  • Update ipod touch software

    I have tried to update my ipod to the newer softwere counless times and it wont work.

    Please verify your model number on the back. If it is A1288, it is a 2nd gen unit and can not be upgraded beyond 4.2.1

  • My friend gave me an ipod touch 3g and its disabled and he does not know the password. it says ipod is disabled connect to itunes and the computer the itunes is broken what should i do.

    My friend gave me an ipod that is disabled and i dont know the code. the computer that has the original itunes for the ipod is broken so i cant restore it. i dont know the password, can someone please help.

    Did you try plugging your iPod into the computer and hitting Restore iPod?

Maybe you are looking for

  • Ituneshelper was not installed correctly, please reinstall itunes Error 7

    Have uninstalled and reinstalled itunes and related  programs (ad infinitum) per advice offered in this forum. So far a complete waste of time. Running Windows 7, 64 bit,  Home Premium. Have repaired windows installation as well, to no effect. Consid

  • Missing conference ID while scheduling an online meeting

    Hi, I've deployed a Lync server 2010(4.0.7577.0) and an Exchange 2010(14.00.0639.021) for our video/audio calls/conferences. When I schedule an online meeting in the outlook, I could see the meeting web access link (https//...), but couldn't find the

  • How to change the Table name during the Run Time

    Hi I have to generate a Oracle Developer/2000 report. The input paramater is Vendor ( Ex:- Aetna,Cigna,BCBS...) If the input paramater is Aetna then the table report should use is Aetna_Emp_Data or If the input is Cigna then The table is Cigna_Emp_Da

  • Having a problem in Flash

    Hi my name is Cathy, I'm new to flash and have come across a problem already. I'm trying to do a simple animation with tweens but the tween button does not appear on the properties box when I want to animate my shape and there is a message in the pro

  • Dymanic Drop down list

    I have a drop down list that will exists in multiple pages. The VO that is linked to the dropdown list need to be executed differently (passing certain parameters) depend on the page that the drop down list is in. So two things determine the values i