Updated Itunes and hit a problem

Not sure if this is the right forum as i can't remember what my ipod is, bought two years ago and it may be a video ipod i'm just not sure. Anyway I updated itunes the other day and now all my playlists appear to now be empty. Not sure what i've done but any suggestions as to how to fix it. I have an old copy of my music on my external hard drive, do i need to retrieve that?
Thanks in advance

Go here:
iTunes Support
and follow the instructions to report the issue to the iTunes Store. If you tried that and didn't even receive the automated acknowlegement of your submission, check any antispam filters on your email account or in your email application and make sure they're not trapping emails from Apple.
Regards.

Similar Messages

  • I updated iTunes and then had problems. iTunes fails to download. Did they take it off-line?

    I updated iTunes and then had problems. iTunes fails to download. Did they take it off-line?

    There were no error codes.  I went to the download site and started to download. Popup window appeared and then when I clicked on save, the window disappeared, but no download appeared in the download folder.
    many thanks.
    Try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

  • Trying to update iTunes and I get the error - "errors occured while installing the updates. If the problem persists, choose Tools Download only and try installing manually". Currently on version 10.5.3.3 trying to update to 11.0.2 on a Windows 7 64-bit

    Trying to update iTunes and I get the error - "errors occured while installing the updates. If the problem persists, choose Tools > Download only and try installing manually". Currently on version 10.5.3.3 trying to update to 11.0.2 on a Windows 7 64-bit.

    Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
    http://www.apple.com/itunes/download/

  • My iphone 3gs wont update. itunes and ipod touch update no problem, my GF has exact same phone and hers updated also...any advice?

    My iphone 3gs wont update. itunes and ipod touch update no problem, my GF has exact same phone and hers updated also...any advice?

    If I was in your shoes, I would choose to restore the iPhone with iTunes and then choose to NOT restore a previous backup.  I'd then go on to set up the phone as though it were totally new, and choose the stuff to load onto it.
    The reason I'd go through that trouble.. even though it meant losing a lot of settings and having to set stuff up again .. is because I wasn't sure I could trust the backup that it's restoring from.
    If you have trouble again after doing the fresh reload -- especially if it's soon after you do it -- you may have a hardware issue with the phone, such as faulty flash memory or a processor chip that's failing. If that's the case, you'll want to consider your repair/replacement options at that point.

  • When i try to update itunes and quicktime, it stops me and says " The feature you are trying to use is on a network resource that is unavailable" please help.

    when i try to update itunes and quicktime, it stops me and says " The feature you are trying to use is on a network resource that is unavailable" please help.

    Before trying the update again, use Microsoft's Fix it solution at http://support.microsoft.com/mats/Program_Install_and_Uninstall. Use it to uninstall iTunes and Quicktime. It bypasses this not uncommon problem. When the solution finishes, the selected program will be uninstalled. It can take several minutes and I have seen as much as half an hour.
    After iTunes & Quicktime are uninstalled, try the update again.

  • I tried to update itunes and now my ipod won't work. What's wrong?

    I tried to update itunes and now my ipod is not recognized in itunes or on my computer. It will only show a picture of the usb cord going into itunes and it won't do anything else. How do I make it work and what happened?

    http://support.apple.com/kb/TS1538
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • Exception processing message 0xc0000013 after updating itunes and Quicktime

    After updating itunes and Quicktime, every time I remove a CD from my DVD drives I get an error saying no disk exception processing message 0xc0000013 Parameters 0x759f023c 0x87f51934 0x759f023c 0x759f023c.
    I tried doing a restore to a time before that update and that didn't seem to help. It just gave me different parameters.
    I'm using Windows Vista and this is driving me nuts.
    Any help would be greatly appreciated.

    I also have the same problems as you guys after installing Corel Painshop Pro X12. I went into the task list and stop the CorelIOMonitor process and then the problem went away. I found out that you can disable this from starting up using System Configuration tool via Start -> Run -> msconfig
    . It's an interm solution untell they fix it. Maybe someone needs to notify Corel or Apple to fix this problem.

  • My iPod touch won't connect to wifi. Password is correct. Already reset network settings and restored ipod to original settings. Already updated iTunes and upgraded iPod to iOS 6.

    A message keeps popping up when I try to join my network that says, "unable to join the network."
    I have already reset network settings and restored ipod to original settings.
    I already updated iTunes and upgraded iPod to iOS 6.
    The password is correct. I even made sure by checking my wifi account.
    I have completely restarted my internet connection multiple times.
    I have also restarted my ipod multiple times
    My wifi was working on my iPod yesterday before I reset all settings.
    I updated it yesterday to iOS 5. Still didn't work.
    It wasn't updated to the new iOS 6 until today so I don't think it has anything to do with the upgrade.
    My camera started to be glitchy, so I reset my Ipod like I was advised in another discussion.
    My internet wasn't connected anymore. My password wasn't working either, but the wifi connection was still showing.
    Safari still wasn't working, though.
    I did the sensible thing and I reset my network connection.
    Now, the password isn't working and there's no wifi signal.
    The camera is working well now, but the wifi is messed up. I didn't expect any of this to happen. The internet is all I use the iPod for. Now, the iPod is useless to me. Please help?

    are other things still connecting to the wifi without a problem?
    Have you tried resetting network settings, then unplugging modem and router from power for 40 seconds then plugging back in letting the lights stabilize and Then recconecting with the ipod>?

  • HT1719 my ipod shuffle 4th generation will not charge or connect to the computer, I updated iTunes and I got a new charger.

    My iPod Shuffle will not charge or connect to the computer. I updated iTunes and bought a new charger. Any ideas? Thanks

    My question was, when you connect the shuffle to USB, does the light come ON?  From the way you answered, I'm not sure if you are answering that question, or saying that the light does not come ON when you move the power switch on the shuffle to the ON position.
    Also, what happens when you connect the shuffle to your computer by itself, with nothing else connected to USB?
    If you get no response (no light) from the shuffle when you connect it to USB by itself, trying both the original USB cable and a new one that is compatible with the 4th gen shuffle, try connecting something else to the USB port to confirm it is working properly.  It would be best to test the USB port with something similar, such as a USB flash drive or external drive.  If you can confirm the USB port works properly, it is likely that the cause for this problem is on the shuffle, such as a faulty headphones jack or bad logic board.
    If the shuffle is less than one year from purchase date, it is under warranty.

  • Updated iTunes and now get an error message that the file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. ??

    updated iTunes and now get an error message that the file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. ??

    hello!
    i have a similiar problem:
    i upgraded my mac from 10.6.8 to 10.7.something recently, but i did NOT update itunes, still running version 10.4.1. now i wanted to open itunes but it tells me, that my iTunes Library.itl was created by a newer version of iTunes - which i never used!
    its annoying since i dont want to be forced to download a 720MB pckage of itunes every month - even more so, if the system start "lying" to me.
    or is it another problem? anyone got the same? any solution? maybe an erratic prompt?
    thanks, florian

  • I have just updated iTunes and now it doesn't recoginize my nano or iphone

    I have just updated iTunes and it doesn't recognize my devices

    Hi, I had the same problem with my iPod nano 7th generation.  I found the answer on another forum.  Apple support instructs to uninstall and reinstall iTunes.  However, you must uninstall ALL Apple software, then install iTunes.  I rebooted in between steps (i.e. uninstalled all Apple software, rebooted, installed iTunes, rebooted).  iTunes now recognizes my iPod again.

  • Should I auto update iTunes and Quicktime?

    the System update asks me to update iTunes and Quicktime but I think the versions are incompatible to this version.
    This computer is old dog slow. Would it be slower if i upgraded to the latest OS? Is it even possible.
    Thanks.
    Will

    i appreciate the help
    problem still persists

  • My computer is telling me i do not have permission to access the requested resource to update my iphone 5 to the new ios 7. why is it telling me this and how can i fix it, I have updated itunes and everything

    my computer is telling me i do not have permission to access the requested resource to update my iphone 5 to the new ios 7. why is it telling me this and how can i fix it, I have updated itunes and everything

    I saw this post at about 2:05 becasue I had the same problem. I just tried it again and now the update is downloading! just wait it out. I had to wait about 3.5 hours.

  • Updated iTunes and lost my files again! Please help!?!

    I just updated iTunes and once again lost my library. Using Windows7 64 bit OS. Now I found the file and imported as before and have some but not all of my files. Is there any way to restore my playlists?? I have spent hours creating these for my various devices and each time software is updated I have to do it all over again. It duplicates the names of the playlists but no files are within the lists themselves. Also I don't have any songs that I have paid for in the store. These tally into the hundreds as well into the hundreds of dollars. I kinda would like to have these back as well. Any help here??? Also must I rip all my CDs every time, this process is getting very, very, very old!

    roaminggnome wrote:
    "I just updated iTunes and once again lost my library. "
    So you failed to maintain a backup ( basic) and you lost your music. And then after this happened once, you still have failed to maintain a backup?
    Let's review your logic... If iTunes FAILS, doesn't work properly and it has BUGS the size of 18 wheels trucks THEN it's the users fault???
    OK. He should have made a DVD back up in case of a disaster like this, I'll give you that. BUT the problems are Apple's and iTunes software engineering team responsibility. They're the ones providing defective, buggy software.
    The reason 90% of users won't make a backup is just because they TRUST Apple to correct the problem if it already happened before or they don't have the time to do it. Or maybe they're just plain lazy. LOL

  • After updating iTunes and iPhone 3gs AppleMobileDeviceService.exe initializes and takes up 50% of CPU

    After updating iTunes and iPhone 3gs AppleMobileDeviceService.exe has been taking over 50% of my CPU.  When i attempt to sync my iPhone iTunes hanges on backing up.   I have uninstalled all the apple software and reintalled it.  This fixed the problem until QuickTime updated.  Immediately following the update Apple...Services.exe went haywire agian.  Any help?

    Thanks wjosten.  I've now been through all this, and there was a lot of old 3d party phone stuff to remove.
    However, I have not progressed really.  Any other thoughts on this please?

Maybe you are looking for

  • Create a new plan in OEM

    Hi, I'm having an issue with one huge sql query and want to create a new plan for it. How do I create a new SQL plan in OEM? Someone please help me? Thanks. JW

  • Automatic row processing in a validation

    Hi, I have a form on a table (page11) with one process for automatic row processing and I have the buttons Submit and Create. I have another button f.e. BUTTON_NEW. I have a validation (function returning error text) with "BUTTON_NEW" as When-Button-

  • Spot colors and Transparency causing Overprint knock-out

    Whenever I create a PDF from InDesign (CS3) I get missing artefacts/items on print production. It is caused by a transparent PSD file being laid over a spot color. I print a /ps file and then Distill to Press Quality. Overprint preview in ACrobat Pro

  • Lightroom 3 folder structure display

    I have been using Lightroom 3 for a number of years quite happily. My folders in Lightroom nicely reflected the folder names for their respective photo folders on my external drive. The top level folders were the years (e.g. 2012, 2013, etc) with sub

  • Viewing photos on Macbook on Ipad

    Evening all, I currently have a macbook 2012, I run lightroom on it with the vast majority of my photos having been taken in RAW format (Nikon/Olympus), to speed up my workflow I store my photos on the mac itself (photo's are backed up on a NAS and d