Updated itunes to 11.14 and now my ipod cannot be recognized by itunes

I updated my itunes to the latest version. I have an old iTouch. 2nd generation itouch and now it cant be recognized by itunes. Like it wont appear there. But it's being recognized by my computer. Someone help please

Try
iOS: Device not recognized in iTunes for Windows
I would start with              
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or              
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests

Similar Messages

  • I restored my macbook and now my ipod isn't recognized by itunes

    I restored my macbook and now my ipod classic isn't recognized by Itunes... Help

    Have you worked through each and every single suggestion in this Apple support document yet?  If not it would be a good place to start.
    iPod not recognized in iTunes and Mac desktop
    B-rock

  • While updating my Ipod to ios 5 an unexpcted error occured and now my ipod is not recognized by itunes or my computer and all data has been removed. What can I do

    While updating my Ipod to ios 5 an unexpected arror occured before my data was restored and now Itunes will not recognise my Ipod. My Ipod is also not seen as a device in My Computer but asks me to install drivers. What can I do?

    - First I would remove and reinstall all the Apple software using the following and then restoring the ipOd.
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    - Next see if manually placing the iPOd in recovery mode will allow a restore. For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    - Next try DFU mode:
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Next try another computer/cable to help determine if you have a computer or iPod problem.
    - If the other computer works and yours does not see:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • Installed the new iTunes 11.1.4.62 and now my iPod is not recognized by iTunes

    Seems to be lots of people on here with the same issue. It would be nice if Apple were to advise users of iTunes that there is an issue with iPod syncing so we all don't run around wasting our time. Looks to me like in Device Manager under portable devices the ipod is no longer using the (usbaaple.inf or usbaaple64.inf) apple driver but the older Microsoft device driver. My old one was deleted by the iTunes update and replaced with the Microsoft one. HOW ABOUT SOME HELP APPLE!!!!

    Hi All,
    I tried to download the update and iTunes doesn't work at all! It won't even open. I have tried all of the steps above but still no joy.
    Any help would be much appreciated as I have been on this for one week already.
    Close to my wits end and moving back to a Sony and trying Android for the very first time.
    Thanks in advance.
    Regards
    Darren

  • I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?

    I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?

    I would think, Twins1995, that if we are having the problem, others are as well. Hopefully, Apple will shortly issue a follow-up software release to fix the problem. Or is that just wishful thinking on my part.
    It would be helpful, if there were some kind of work-around in the interim, so we can use our devices. Pretty frustrating when you consider that all of the hardware and software is produced by Apple.

  • Downloaded the latest update and now my iphone is not recognized in itunes

    I downloaded the latest update on my computer for Itunes and now my Iphone is not recognized when I plug it into the computer or open Itunes>

    Device not detected in iTunes for Windows

  • I just updated to 10.9.2 and now my monitor cannot rotate

    I just updated to 10.9.2 and now my palette monitor has:
    1) Lost the ability to rotate
    2) Forgotten my background image
    3) Changed resolution
    It is a LG Flatron E2351.
    I have found others having similar problems and one person has solved it using 'sudo' commands in the command window (something I'm not up to doing) and that scares me a bit... especially since the problem seems to recur after a second reboot.
    This is a MASSIVE oversight by Apple and i'm quite upset that they would not allow 3RD party monitors or displays!
    I use mine (as mentioned) as a palette for video and graphics purposes... and because I cannot fit 2x landscape monitors.
    This needs to be ammended ASAP by Apple. I expect public outcry... I'm hopeful for it... Just like the removal of "mail merge" from Numbers... I'm starting to scratch my head at Apples [P.J.] decisions "post Jobs".

    My colleagues and I have a similar type issue after upgrading from 10.9.1 to 10.9.2.
    We all use mid-2011 Macbook Pro's and also use a sapphiretech Vid-2x displayport to dual DVI adapter.  This adapter essentially bonds two additional external displays into one large monitor.  i.e. two 24-inch displays now become "one" supporting 3840x1080 resolution.  The only caveat to using this adapter is that both monitors need to be of the same model.  There are no drivers needed to use this hardware adapter.
    We don't have displayports per se, rather we use the thunderbolt port.  The Vid-2x adapters have worked fine for us from 10.7 - 10.9.1.
    Since some of us upgraded to 10.9.2 we've all experienced the same issue in that the Mac no longer recognizes the Vid-2x as being capable of the proper 3840x1080 resolution we require.  The best we can get is 3200x1200.  Another interesting note is that there are at least three different model pairs of monitors being used by us (Samsung, Asus, Dell).

  • I was updating my iPod touch to 4.2.5 when an error occurred and now my iPod is not recognized by my computer or under devices in iTunes.  My iPod is also stuck on a screen saying to connect to iTunes.  I tried resetting my iPod and it did not work.

    Please help!  I was updating my iPod to 4.2.5 and iTunes said that it was preparing my iPod for update.  Then an error popped up and now my computer won't recognize my iPod and it doesn't show up under devices in iTunes.  All it has on my iPod is a picture of a USB cable with an arrow pointing to the iTunes logo.  I tried resetting my iPod and it just restarts to the same picture.  I tried restarting my computer as well.

    What was the error number?  That would be very useful since the following gives actions for various errors.
    http://support.apple.com/kb/TS3694
    Try manually placing the iPod in recovery mode to see if that will make the iPod visible in iTunes.  See:
    http://support.apple.com/kb/HT1808

  • Updated my Windows 8 and updated Itunes to newest versions and now my Ipod 7th Generation Nano is not recognized on my computer or Itunes anymore. I have went thru all steps instructed and offered here so what else can I do?

    Recently have updated my Windows 8 and updated Itunes to mose recent version available. My Ipod 7th Generation Nano worked, connected and synced without difficulty prior to this updating, Now when I plug into my computer it will pop up Itunes but say that this Ipod is not recognized. I have done multiple steps offered to try and nothing has worked. Any other suggestions would be helpful. I just got this Ipod for Christmas and now can't even use it to sync content anymore.

    Try a different cable. And are you connecting directly to your computer or through a USB hub?

  • Updated nano to 1.2 and now can't connect to PC or iTunes

    I made the mistake of updating iPod Updater and iTunes and then updated nano to 1.2. Seemed to work fine last night and then today I got a message on the nano screen saying "firewire is not installed. plug in USB to download". I couldn't get the message to clear the screen until I reset many times. AT first it was recognize on both PC and iTunes and then when I tried to connect I got a message saying the device was not installed correctly and it wouldn't load and now suddenly I can't get the PC to even attempt to recognize the device. I did uninstall the updater and iTunes and then re-install the software back to previous revision but that didn't seem to make any difference. Can someone help??
    Compaq   Windows XP Pro  
      Windows XP Pro  

    The only resolution I could get from Support was to replace the device.

  • I just updated to OS 4.0, and now my iPod doesn't play music

    I just installed OS 4.0, and now I can't play music. If I select a track then it will take me to the "Now Playing" screen, and sometimes it will immediately bounce back to the track selection screen, sometimes it won't. But either way it won't play. If I press the play button at the bottom of the screen then a play icon momentarily appears next to the battery indicator, then immediately disappears.
    Also, when I plug the iPod into my computer, iTunes gives me a "set up your iPod" screen, in which I am offered two options: "Set up as a new iPod" or "Restore from the backup of: Phil's iPod". I don't think I want to do either, do I? Will restoring from the backup revert to the old OS or what?

    Huh. I phoned Apple's tech support and was told I needed to restore my iPod, which would mean losing all saved data thereon. iTunes spent ages trying to restore, before telling me that it could not do so - something about data being used by another application. However when I tried using the iPod again I found it was now able to play music. I haven't lost any of my data, and it seems to be working fine now.

  • I downloaded the new version of iTunes and now my iPod will not open in iTunes

    I recently downloaded the new version of iTunes and not my iPod will not open in iTunes

    Hello, srg60. 
    Thank you for visiting Apple Support Communities.
    If your device is not recognized by iTunes, I would recommend the steps in the article below.  Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H.

  • I emptied trash with itunes in it accidentally and now can't play any songs on itunes what can i do?

    so i needed to clear disk space so i could use imovie more, so i put a load of stuff in trash and emptied it, but somehow i stupidly put itunes there too, so now when on itunes i can't play any songs because it keeps asking me to "Locate" it, which i can't do because it doesn't exist anymore arrrggh! i can't use any of my songs on imovie either, it's very frustrating. If there is any way at all that i could recover the songs so i could play them on itunes then that would be great-
    thanks,
    Hamish

    Hi,
    If you don't have a back up, you have lost your music.
    If you have iTunes Store purchases, you can go into iTunes Store and redownload previous purchases.
    Jim

  • There was a virus on my computer. After that i redownloaded itunes and now my ipod is not syncing with itunes. What should i do?

    Please Help.
    Its serious. I cannot put songs in my ipod touch anymore.

    I suspect that now the iPod sees the computer/iTunes library as a new computer/library. Follow these instructions
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

  • Have forgotten my password and have tried to restore but itunes stops in the middle and sayd that i need to connect to itunes with as passcode and now my ipod touch says system disabled

    I have a ipod touch that my son forgot what the passcode is so i went to itunes to restore it and it goes half way through the restore process then itunes doest recognize the ipod the my ipod says ipod is disabled connect to itunes but itunes brins up the message enter passcode does anyone know what to do or how to get this to work

    Follow these instructions to resolve a forgotten passcode:
    http://support.apple.com/kb/HT1212

Maybe you are looking for