Updated ituneson desktop and does not recognize devices

updated itunes on desktop and does not recognize ipod nano or touch

Message Edited by Crepuscular on 03-03-2009 04:08 PM

Similar Messages

  • Desktop Manager does not recognize device without administrator privileges

    Hi. My BB Bold is working fine at home with DM 4.6. However, at work DM only detects that the device is connected when I'm granted with administrator privileges (Windows XP Pro, SP2). When I'm denied the extra privileges DM cannot detect the BB.
    DM was intalled under administrator privileges but I'm not allowed having this privileges permanently.
    Any ideas?
    Thanks in advance.
    Solved!
    Go to Solution.

    It sounds like when DM was installed, it wasn't installed 'for any user'.  Perhaps uninstall it and when it's reinstalled make sure the option 'for any user' is checked (insteald of 'only for this user').
    If you find a post here helpful, please consider giving the poster some Kudos

  • HT4623 e while updating iOS. When connected to PC & iTunes get the message in recovery mode, must restore.   I have followed the steps to restore and still have the iTunes screen showing and iTunes still does not recognize device.

    iPad 2 froze while updating iOS 7.0.4.  When connected to PC & iTunes get the message in recovery mode, must restore.   I have followed the steps to restore and still have the iTunes screen showing and iTunes still does not recognize device.

    Sorry if we didn't get to your question fast enough; we are all volunteers doing this in our spare time. Try the steps in this article. If you're unsuccessful, you'll need to take your device to the Genius Bar for an evaluation.
    http://osxdaily.com/2010/12/04/ipad-dfu-mode/

  • I have an ipod touch  and Itunes does not recognize device.  What can I do?

    I have an ipod touch  and Itunes does not recognize device.  What can I do?

    See:
    iOS: Device not recognized in iTunes for Windows

  • Blackberry Desktop Software does not recognize Curve 8310 (on Computer Mass Storage mode is available)

    Blackberry Desktop Software does not recognize Curve 8310 (on Computer Mass Storage mode is available).
    Can not sync or do anything else. I believe I have the latest versions of Desktop Software and Device software.
    Stuck in limbo at this point. 

    Hi and welcome to the forums!
    The most common connection issues are addressed in the attached link.
    Let us know how it goes!
    Thanks,
    Bifocals
    KB00125 BlackBerry® Desktop Software cannot detect the BlackBerry® smartphone 
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Desktop Manager does not recognize USB Connection

    I have installed the Desktop Manager for MAC (v1.0.2) on my MacBook Pro Snow Leopard10.6.3.
    When I connect my Storm 9520 the Mac OS recognizes the media storage drives in the 'Finder'.  I can copy files to and from the device media using 'Finder' but the Desktop Manager does not recognize that the device is plugged into the USB (yes I have tried both USB connectors).
    file:///Users/Nigel/Desktop/WaitingForUSB.jpg

    I have an 8310, Macbook Pro running OSX 10.6 and the BB desktop v 1.0.2 build 8.  It recently stopped recognizing the USB connection as well.  I was able to sync my BB with the MAC but can no longer do so.  The MAC mounts the BB and I can access the SD card.  What gives here?

  • BlackBerry Desktop Software does not recognize Bluetooth

    When I try to add my BlackBerry using Bluetooth the BlackBerry Desktop Software does not recognize it. I have ensured that my BlackBerry is in Listen mode but it won't connect. I know the Bluetooth support on my BlackBerry Storm is working (9550) because it does recognize my laptop.

    Hi and welcome to the forums!
    We need your PC type, current OS, the version of desktop manager you are using. Here are some suggestions until your provide the details.
    Thanks,
    Bifocals
    KB13130 Cannot use Bluetooth technology to wirelessly synchronize the BlackBerry smartphone with BlackBerry Desktop Manager
    KB22387 BlackBerry Desktop Software does not detect a BlackBerry smartphone when the first-time connection is by Bluetooth
    KB05143 How to turn on BlackBerry Desktop Manager connection logging
    KB18222 BlackBerry fails to connect to Desktop Manager 5.0 via Bluetooth on 64-bit computers with Widcomm Bluetooth stack
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Been trying to use an external memory card reader with my macbook air- connecting via usb port, air does not recognize device nor the microSD card from my gopro - help

    Been trying to use an external memory card reader with my macbook air… connecting via usb port, air does not recognize device nor the microSD card from my gopro … help

    Some external ones do not work with the Mac's although most do. There are some driver compadibility issues with Mavericks, so I would wait for an update.

  • I have OS X (10.6.8) , I have downloaded Apple Java 6 update 13, pogo chess does not recognize my Java, also Java does not appear in system preferences

    I have OS X (10.6.8) , I have downloaded Apple Java 6 update 13, pogo chess does not recognize my Java, also Java does not appear in system preferences.
    How do I get Java to work.

    I just got off phone with AppleCare about same issue. Here is how to fix:
    How to reinstall Java for 10.6.8:
    - Go to:  /System/Library/Java/Support/CoreDeploy.bundle/Contents
    -  Move: javaAppletPlugin.plugin to the trash
    -  Run update   ---   Found at: http://support.apple.com/kb/DL1573
    -  Reset safari
    -  Empty cache

  • Changed my email address, confirmed my password. The App Store still has old address and does not recognize my password.

    Changed my email address, confirmed my password. The App Store has old email address and does not recognize the password?

    Easy fix... it's a refresh issue. Sign out and back in with changed name.
    iOS: Changing the signed-in iTunes Store account
              http://support.apple.com/kb/HT1311

  • BlackBerry Desktop Software does not recognize my device

    My problem is that when I plug my phone into my desktop computer by USB it will charge, but when I go to do anything to by means of BlackBerry Desktop Software the program does not recognize that my device is plugged in. This has been going on for months now that it will not sync, I just haven't desperately needed to sync my phone until now. I have tried pulling the battery and pulling the sim card. I have also tried other USB cords.

    This has been known to help others in your situation:
    www.blackberry.com/btsc/KB10144
    Let us know if that helps you.  
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • IMovie (and iMac) does not recognize device(s)

    Hello and thanks for reading.  I know this topic is like beating a dead horse but this one is unique.  I'm a professional editor and I couldn't figure this out so any help would be appreciated.  Here's the play by play:
    I edit using FCP 5.1.4 and have for years.  I've had the same set up running for years and do high volume editing.
    I have a chain of 4 Lacie drives, all connected by firewire.
    At the end of that string, I have my tape player for capturing footage, a Sony GV-HD700, which then goes on to the TVs, DVD players, etc.
    Also the end of that string, I also have a disc burner for making DVDs.
    So it goes: iMac > Lacie #1 > Lacie #2 > Lacie #3 > Lacie #4 > Sony tape player & DVD burner > TVs, VCRs, etc.
    Yesterday, I was in a rush and the DVD burner was going slow so I unplugged it from the end of the string of Lacie drives and plugged it directly into the back of the computer to see if it would burn faster.
    It didn't, so I plugged it back into the end of the Lacie string.
    At that point, Lacie #4 became unrecognizable to the computer and therefore so was the tape player, which is further down the chain.
    When I plugged the tape player high up the chain, into Lacie #3, it still was not recognized.
    I plugged the tape player (Sony GV-HD700) directly into the back of the computer...still not recognized.
    I took the Sony GV-HD700 into our other editing bay and it was still not recognized.
    I pulled out my camera (Sony HDR-FX1000) and plugged it directly into the back of the original computer...recognized just fine.
    I plugged Sony HDR-FX1000 camera into the back of Lacie #2...recognized just fine.
    I took the Sony HDR-FX1000 camera into our other editing bay...recognized just fine.
    I have a big deadline so I said "Screw it." and was just going to capture from the camera for the time being.
    I reset the Lacie drive chain, plugged the Camera into the back of Lacie #4 (just like the original setup) and BANG: Lacie #4 and the Sony HDR-FX1000 camera was not recognized.
    I plugged the Sony HDR-FX1000 camera directly into the back of the computer...still not recognized.
    I took the Sony HDR-FX1000 camera into our other editing bay...still not recognized.
    I thought it might be a Final Cut Pro issue so I pulled up iMovie and it does not recognize any device connected to the computer even though I'm looking directly at it plugged in.
    The entire iMac has lost the ability to recognize devices that I've used for years.  I've now lost the ability to capture footage and I'm running out of time.  It's almost as if the devices were getting infected by one of the Lacie drives (I think Lacie #4).  Is that even possible?  Has anyone ever heard of something like this?  I don't know if it's something I need to change on the iMac to recognize them again, or if it's a setting on the device to reset the connection, or if somehow the Lacie drive corrupted the devices and made them unrecognizable to iMacs.
    It's very, very weird.
    Thanks for your help.
    27" iMac (2009)
    OS X 10.8.5
    Final Cut Pro 5.1.4
    Tape player: Sony GV-HD700
    Camera: Sony HDR-FX1000
    I've had this setup for years so I don't know what type firewire it is.

    See:
    iOS: Device not recognized in iTunes for Windows

  • Windows 7 does not recognize device

    I have been successfully connecting my 8330 to a desktop PC running XP for quite a while.  The device sw is v4.5.0.175.  I recently got a new Lenovo T410 laptop, running Windows 7.  I have downloaded the DM software (v5.0.1) and verified that my device SW is up-to-date, but the laptop is still not recognizing that the device is connected (via USB).  I've tried it in all the USB ports on the laptop, and also followed all the steps detailed in KB13146, with no luck.  I can't find anything in any of the forums that reference Windows 7.  Can anyone provide help to resolve this problem?
    Solved!
    Go to Solution.

    Hi and Welcome to the Forums!
    Here is the list of troubleshooting atricles...hopefully something will be useful:
    http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Tips-for-getting-BlackBerry-Deskt...
    KB02640 Troubleshooting USB connections
    KB15486 Top 10 BlackBerry smartphone and BlackBerry Desktop Manager troubleshooting tips
    KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
    KB00019 No PIN displayed in BlackBerry Desktop Redirector
    KB10938 "USB charging current is insufficient" appears on the BlackBerry smartphone
    KB01451 How to turn on advanced synchronization logging if a wired synchronization fails
    KB19717 The BlackBerry smartphone is not detected as a USB Mass Storage Device when connected to a computer
    Also, check that you are using only root USB ports...no hubs (sometimes the front-side ports are hubs...use a rear USB port). And make sure to try disabling USB power management in your system configuration (Device Manager).
    Apologies in advance if this is redundant -- there's no way to be sure if you've already seen and tried these. I can attest that DTM does indeed recognize a BB under Win7...mine is exactly so.
    Hopefully something there is helpful!
    Cheers!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Desktop computer does not recognize ROM OS

    Hi! ... I'm in Viet Nam. I use to BDM ROM OS 4.2 for BlackBerry but do not know how youuse a test period ROM computer does not recognize it anymore, BlackBerry plug oncompetition may not automatically receive ROM to ROM update ... I have tried multiple patches down and try different ROM but with different kinds of BlackBerry but the computer still does not receive ROM ... I examined the file and delete C: \ Program Files\ Common Files \ Research In Motion \ AppLoader \ Vendor.xml but still is not. Whoknows how to fix it for me to test ... UP BDM7 ROM online through a time consuming ...
    Currently I am content Window7 and WINDOW8 ... = ((

    Hi and welcome to the forums!
    Are you receiving any JVM errors?
    Try the following procedure posted on the BlackBerryForums by user D_Fisher.
    Click here: http://blackberryfaq.com/index.php/How_do_I_wipe_t​he_BlackBerry_using_Jl_Cmder%3F
    Look at step 2 under wipe device.
    This may also apply if you are using a laptop with docking station or you have USB power management enabled on the PC.
    Click here: KB02792
    Thanks,
    Bifocals
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Desktop Mac does not recognize Wireless  Keyboard

    my iMAc does not recognize my wireless keyboard. It works fine with my iPad.

    Does your iMac recognize any other BT devices? For example a trackpad, or a wireless mouse?
    Also, check Applications -> Utilities -> Console and look for bluetooth messages.

Maybe you are looking for