Updated Mavericks Mail, Version 1.0 (1822) has killed all accounts

I have a Yahoo account, an ATT account (via Yahoo), a gmail account and an iCloud account.
They worked fine after upgrading to Mavericks. THEN, the gmail bug fix came out and Mail updated. Now, I can't access the Yahoo, ATT or Gmail accounts.
Mail keeps asking me for the passwords and I input them. I've triple checked them directly. But Connection Doctor says they are invalid.
Everything continues to work fine via my iPad and iPhone.
I haven't paid any attention to Mail for years. It's been working just fine... All of a sudden I need to get back up to speed and, frankly, I'm a bit lost.
Any advice would be helpful.

iCloud was working, but Mail wouldn't save passwords for *other* Internet Accounts (Gmail, Yahoo!, etc.)
I fixed the problem serendipitously by resetting my keychain.
https://support.apple.com/kb/TS5362

Similar Messages

Ever since updating to latest version of Firefox it has been painfully slow on my Mac running OS 10.5.8.

Ever since updating to latest version of Firefox it has been painfully slow on my Mac running OS 10.5.8.
Websites just hang, and never get to where they are supposed to go. The status loop on tabs just spins and spins but never loads the site. Go to the same site on Safari and there in a second. It is like dial up slow. Have tried all the troubleshooting tips(reset, delete/re-create profiles, uninstall/reinstall, updated flash) nothing works.
Firefox had been working fine until latest update. What gives?

'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "Continue in Safe Mode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

Mac Mail Version 6.0 (1486) has stopped recieving mesages regularly and the search doesn't work

Mac Mail Version 6.0 (1486) has stopped recieving mesages regularly and the search doesn't work.
Since installing Mountain Lion, Mail seems to be very unresponsive. I have mac mail running on an iMac (which works fine) and a 2012 MacbookPro which is the one having the issues with the Mail app. Both computers are running on Mountian Lion.
When I scroll up in Mail for instance, the frame rate drops to about 5 a second.
When I click on a message it doesn't display it in the preview pane. Which is very annoying!
But I can get around the issue by double clicking on a message and it opens up the message in a new window.
When I search for a message, nothing appears in the results. Even if Im searching for something that is defiently there, eg if I type in my name, you'd think some results would come up. But when I click on something else, the results dispaly for about half a second. Bizarre. Is anyone else having this problem?

what kind of error in browser you are seeing?
is search service application never starterd or its started but cannot crawl?
did you see the timer jobs related to search services and what's their status?
so what about the search results from site collection?
also make sure this service "SharePoint Search Host Controller Service" started on all servers in the farm.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog
In the browser I receive the following error:
The search service app is running, doesn't crawl:
Yes, I can see the timer jobs related to search services, some of them are Succeded, others are Scheduled.
The service SharePoint Search Host Controller Service is started in the first server of the farm, but not in the second
one. When I try to start it, I receive the following error:
Windows could not start the Sharepoint Search Host Controller Service on Local Computer. Error 1067: The process terminated unexpectedly.
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

Updated to iMovie version 10.0 Opened it. All my clips and projects were there. Then it crashed. Now no clips no projects. If I try and import them they are dimmed. If I try and 'update projects and events' a dialogue box says no files found.

Have macbook pro 2012, running Maverick. Updated to iMovie version 10.0 Opened it. All my clips and projects were there. Then it crashed. Now no clips no projects. If I try and import them they are dimmed. If I try and 'update projects and events' a dialogue box says no files found.
Have tried restarting computer, no joy. Help!!

The reply from Nerval fixed it. It is very simple and it works.
If you have a lot of Projects and Events, leave the iMovie running for a long time. I had 160G and it took 4hrs. It is doing it in the background so don't shutdown too quick.
Thanks Nerval.

As soon as I shifted to iCloud I could not use my mail on my computer. It put all accounts offline. What's up

As soon as I shifted to iCloud I could not use my mail on my computer. It put all accounts offline. What's up

If you close Firefox, then start Firefox in Safe Mode, does the problem still occur? For instructions on starting in Safe Mode, see [[Safe Mode]]. Extensions can sometimes be the cause of problems. If the problem does not occur in Safe Mode, then you can disable your extensions one-by-one until you find out which one is causing the problem. See [[Troubleshooting extensions and themes]] Update Firefox, see [[Updating Firefox]]

Update to process version 2010 & smart collection "has adjustments"

Buying the new Lightroom 3 version ofcourse I wanted to profit of the new process version. So I selected all images I had "not adjusted" before and selected Update to Process version 2010. This works great.
However I now have one problem.
I had and have a Smart collection which helps me in my workflow to find all images that have not been touched, so have no adjustments.
This Smart collection has become worthless because of the update to process version 2010 all images have been adjusted.
Ok, this is correct and yet I miss my ability to select images which I have not adjusted.
Once I have set the default process version to 2010 all new images are correctly shown.
Question: how can I select all those images which have only the process version updated, but have no further adjustments?

Changing the process to version 2010 is considered as an adjustment; it will appear in the photo's history in the same way as any other development adjustment. The smart filter condition "Has Adjustments" only has a true or false setting so you can't distinguish the process version adjustment from any other. Instead of using this method to spot the photos I need to work on, I find that I have more control over my workflow by using keywords such as "review", "develop", "print"; you can make these keywords not exportable so that they are not part of the keyword list in exported photos.
Interestingly, when one or more photos are selected in the film strip and the reset button is clicked in develop mode the photo will revert back to its original state, the "Has Adjustments" condition will become false, but the process version will remain at 2010.
If you have a backup of your catalog that precedes the step where you updated the process version of all photos, open this backup, add a keyword of your choice to all the photos that have not been touched, then apply the process version change. You can then change your smart catalog to use this keyword as opposed to the "Has Adjustment" condition and remove the keyword you have set on photos that have not been touched as soon as you are done editing them. IMPORTANT: Any changes you have made following the date and time of the backup will be lost.
If you don't have a backup to go to, you will have to manually identify which photos, which from your point of view, have not been touched.
Some ideas:
If you did not make other edits following the change of the process version, and have not made other edits on that date, you could built a smart collection based on the 'Edit Date" and then reset the develop settings of all the photos in that collection.
Another possible condition is a "Capture Date" range where you know photos haven't been touched yet.
There may be other options, there may be a plugin that can help you, or ultimately there would be means to access the database outside of Lightroom - contact me if you get that desperate to fix this!
http://www.BDLImagery.com

Mail lost all passwords and has taken all accounts offline

Using OS 10.9.4, Mail Version 7.3 (1878.6) and Keychain Version 9.0 (55153)
My mail went offline Saturday and I haven't been able to get back into it. I have verified access into all the accounts using Browser based access so have ruled out their being server issues etc.
Chrome kept asking me for passwords from keychain after the latest OS updates, I checked with Keychain and it stated that my Keychain file needed be repaired, so I selected repair, Chrome fixed and no longer asks. However now I cannot get into Mac Mail, all accounts are shown offline, it won't store any passwords and repeatedly asks me for passwords if I try and update or take the mailboxes on line.
If I go into Keychain I cannot unlock the keychain (ie click the padlock to unlock the login keychain) and I have nothing showing..
Is there any known issues with keychain? I don't know enough about it to try things without risking breaking it...
Any suggestions gratefully received.
Graham

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

Updated reader to version 11.0.7.79, now all I am getting are gray screens. How do I fix this?

I am using Firefox 29.0.1 browser, and Windows 7 Home Premium. After updating Reader to the latest version, (11.0.7.79), any pdf page I have tried to view, has controls,(buttons) for various actions (on the page border), and THAT PART of the page is normal, but the entire VIEWING screen is gray, and nothing ever loads. This did not ever happen until I updated Reader from version 10. How can I repair this?

You do use the Adobe Reader plugin, not the Firefox PDF viewer? See http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html
If you use indeed the Adobe plugin, I would check your graphics driver: http://forums.adobe.com/thread/945765

With maverick Mail won't let me search at all. Anyone able to help?

With my new powerbook came Maverick. Now mail won't let me search at all. Can anyone help me solve this please?

I have exactly the same problem. I received an important mail just two days ago and search doesn't even find it. Flagged mail no longer works either, so it's nigh on impossible for me to find my mails to respond to later. It's accurate to say that to me, in general Mavericks Mail.app is no longer a useful mail tool since it utterly breaks my mark-for-later-response workflow.
What's worse is that this is a massive regression. This all used to work fine. It's somewhat upsetting that I can use my four-year-old Apple laptop to effectively use email and yet my brand new one is useless. With "progress" like this, how can Apple expect brand loyalty?
EDIT: In case any Apple people read this, I am using a Google Apps mail account.
Message was edited by: redpola

Update for OSX 10.2.? has killed my mouse

I have an IMAC blue with CRT. It came with OS 9 and update discs to OSX and a further update CD to I think OSX 10.2.?
However it may be and older version of OSX as I can't see the current version as machine has problems.
I had not used the machine for a while and when I started it the other night it said I needed to update which I did. I think it was the combo update. I am running Norton Anti Virus. It got 98% of way through the update and froze. I left it for a while but as the only thing I could do was move the mouse but not then click on anything I was forced to unplug it. Since then when I start the machine up it looks like it is working but it does not use the mouse and I can't see how to get at anything to try and repair it without a working mouse. I can use te keyboard but can't work out how to do anything usefull without the mouse.
I have tried plugging the mouse into deifferent USB ports without success.
I tried to reinstall the latest OSX update CD I have which boots OK and then lets me use the mouse (not a hardware fault) but when it gets to selecting the disk it says that it is the wrong language and will not let me select the hard drive. So I can't reair it to the previous working version.
Any suggestions would be appreciated.

Hi Paul, and welcome to the discussions:
I suspect the source of your trouble is Norton. I'm not going to argue the merits of having anti-virus software on a Mac: if you're more comfortable with it than without, then go ahead and use it. BUT, always disable Norton when you're running software updates.
That said, you could try booting into Safe mode, then running Disk Utility. Also, go into System Preferences and open the International pane to check which language has priority. If "English" isn't at the top, move it to the top.
Or, if there isn't anything of importance stored on the iMac, boot from the install disk, and at the first opportunity go to the Install menu at the top of the screen. Launch Disk Utility and erase the hard drive. Then quit Disk Utility and continue with the installation.
Good luck,
Andrew

10.9 Mavericks Mail Setup Instructions for Gmail/Google Apps Email Accounts

Can Apple provide (or have they already) specific instructions for setting up the Mail client with Gmail/Google Apps email accounts? I've read other threads with various workarounds that work for some but not others. I am hoping there is a standard set of instructions directly from Apple on this.

Gmail with Apple Mail
Gmail with Apple Mail (2)
Gmail with Apple Mail (3)
Gmail with Apple Mail (4)
Gmail with Apple Mail (5)

Update to Mountain Lion 10.8.5 has killed my wifi access. Help needed.

I have a late 2008 aluminium MacBook. Everything worked fine until I downloaded the update on wifi, restarted, & now I cannot turn my wifi on.
Help please! I need to use my MacBook tonight.

Information.
Troubleshooting Wi-Fi issues in OS X
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)
Wireless Diagnostics - About

HT6065 I have unresolved issues with Mavericks mail. When receiving identical emails in different accounts if I open in one account it automatically appears as open in the other accounts.

I have 3 email accounts on my mac. Often more than one account will receive the same email. If I open the email on any one account it appears as opened on each account that received the identical email. This problem only began with the installation of Mavericks. I have contacted Apple phone support and removed each account and then added them again. The problem persists. I have talked with several other friends who have the same complaint. This is particularly annoying as these accounts have different users. Is there a fix? Thanks.

You can look at one of these if you want to sign on with different identities at the same time:
* CookiePie: http://www.nektra.com/oss/firefox/extensions/cookiepie/
* CookieSwap: https://addons.mozilla.org/firefox/addon/3255
* Multifox: http://br.mozdev.org/multifox/ - Different logins at the same time

New Iphone baseband firmware has killed all GPS location software.

Are apple aware that the new iphone modem firmware update has effectively broken the iphone 3gs as far as GPS location goes. I have looked around on various forums and on the tomtom forum there are lots of people in the same situation.
http://www.tomtomforums.com/tomtom-iphone-navigator/22273-ios4-1-4-upgrade-no-gp s-fix-iphone-3g.html
I have not seen evidence of apple acknowledging the issue...so dont know if they are even aware of the problem.

I'm getting very interested in GPS problems across the iPhone range. Ive got a 3GS and the GPS satellite fix stopped working completely recently. A fix identified using jailbreak and an ssh terminal tells me a good proportion of these problems are with locationd, the gps process in the iPhone, or more accurately, I think that it's possible for some of the data this process uses to become corrupted; the "fix" involves stopping the process and deleting the data it uses. On restart, locations is forced to rebuild the data, and everything then works.
I suspect this is true across the iPhone range - and worse, I think that the backup function in iTunes actually backs up the bad data. Thus, when you restore from backup, you actually put the problem back in! Either that, or GPS cache data isnt deleted when the iphone is restored.
What we need is an option in iTunes, or the iPhone settings, to clear GPS ephemeris and related data down and restart locationd: this will save apple a fortune in support at genius bars, as I reckon everyone who is getting a replacement is just getting a reblanked refurbished iPhone with no hardware fixes - they could be turning them around in the back of the stores!
We need to get some group pressure together to get an answer out of apple on this really - they do seem to have an approach which has much in common with the way the UK banks were dealing with overdraft fees - if you complained, they refunded just to keep you quiet and make sure you didn't shout. If this issue is an underlying gps driver or application demon issue, they should give us a way to work around the issue.

Leopard has killed all recording via all devices

What is up with this. Not a single one of my external recording devices of any kind will record. I have a professional studio and nothing will record directly into Leopard.
Everything registers as receiving a signal but when you bring up the app to record it will not translate into a data stream for recording.
I even freaking tested Leopard on my Mac Book Pro before installing it on my Mac Pro and stupid me since all my apps opened and operated as normal and in the sound preferences all my inputs were registering an incoming signal I thought I was a go to upgrade.
WRONG!! WRONG!!
Someone please help. Right now I can only record a single track into my backup dat recorder and cannot record anything into Soundtrack Pro, Garageband, QuickTime, Audacity well anything.
Is there a work around or a command line fix? Anything. I just have to think something is hung up in core audio somewhere.
The funny thing is that right after the install everything worked fine. It only stopped sometime in the last 4-5 days.
Jeff

Others of us have had issues with the X800 XT drivers, specifically not allowing fast switching when used at highest resolution with the Apple Cinema Display 30" model.
You can remedy this by either not doing fast switching (log out each time you want to switch users) or dropping resolution down 1 or more notches on the control panel.
There are bad drivers and ATI is putting the blame on Apple for this. No identified fix, though enough people have the problem that I'd think they would fix it sooner rather than later. THis is all for G5 machines.
All in all, Leopard seems to have MANY MANY more issues on PPC / G5 machines than with Intel-based machines.... I've gone back to 10.4.10 until they produce a workable, usable version of 10.5.

Updated Mavericks Mail, Version 1.0 (1822) has killed all accounts

Similar Messages

Maybe you are looking for