Updated McAfee anti-virus, Computer turned off and now it won't boot past windows

I have a HP Pavilion P6000 Series
Model #P6520f
AMD Athlon II 633 Quad-Core
6GB DDR3
1 Terabyte HD
Genuine Windows 7 Home Premium 64-bit
I was installing updates for McAfee anti-virus, and suddenly the power went out. After a few hours the power came back on and when I turned the computer back on it went straight to disk repair, which I also waited for to run another two hours. I then turned it off and back on but I can't get past the Windows display.

Hello screwdriver08,
Are you able to boot the system into safe mode? If we can get into safe mode then we know that it's a program causing your issue. If we can't get into safe mode then the operating system is the issue.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Similar Messages

  • My iphone 4 turned off and now it won't turn back on I've tried charging it and plugging it into my computer but it's still a blank screen. please help me.

    my iphone 4 turned off and now it won't turn back on I've tried charging it and plugging it into my computer but it's still a blank screen. please help me.

    Intel-based Macs: Resetting the System Management Controller (SMC)

  • HT201412 My iphone 3GS automatically turned off and now, it won't turn on.

    My iphone 3GS automatically turned off and now, it won't turn on. My lock button is not working. What do I do? HELP!!!!! :(((

    I had it checked a while ago. They said, my battery's dead so they changed it. Now, while I was using my phone, it turned black but it still vibrates and it has a little light (but still black). Please help me.

  • I was working on my iPad 1 and it turned off and now it won't turn back on.  It was 50% charged and even when I connect it to be charged it still won't turn on.  Is there a reset button?

    I was working on my iPad and it turned off suddenly and now it won't turn back on.  It was at least 50% charged and when I tried to connect the charger it still will not come on.  Is there a reset button?

    Thank you so much!  It worked, I was reading around and saw this has happened to a number of iPad users.  Thank you for your prompt response, I was so worried I broke it or something.

  • My laptop randomly turned off and now it won't turn back on. What do I do now?

    I was just on my laptop like any other regular day but than all of a sudden it turned off. I tried to turn it back on but nothing happen. The battery is full and everything seems normal (except the reason it won't turn on) HELP!

    Intel-based Macs: Resetting the System Management Controller (SMC)

  • I changed the name on my computer from the Windows side and now it won't boot to Windows (bootcamped)

    I changed the name on my computer on the Windows side and now I cannot boot to Windows 7 (bootcamped).  Any suggetions?

    Hello cmcnanna,
    I'm sorry to hear you are having these issues with your iPhone. If your iPhone isn't starting up or responding at all, you may find the troubleshooting steps outlined in the following article helpful:
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    If that does not resolve the issue, you will most likely need to have your iPhone evaluated and/or serviced. You may find the following page useful in that case:
    Apple - Support - Service Answer Center
    Sincerely,
    - Brenden

  • HT1688 My Iphone just turned off and now it won't turn on at all.  What's wrong?

    The last thing I did was check my email and place it on the counter. I went and did something and when I picked it up it was off.   Even when I attach it to the charger, it does nothing.  We tried the Iphone tracher and it says it is offline.
    Has this happened to anyone?  Should I take it to ATT or Apple?

    What to do if your iPhone will not turn on

  • My Ipod turned off, and now it won't respond to anything!

    I was in the shower listening to it on my docking station, and it shut off.
    now when i plug it into my computer or my charger it doesn't even flinch. NOTHING WORKS!!!
    not even the five r's...
    Any help?

    i got the same prob. i just use it for 2 hours... now it doesnt work anymore. it wont start, im so disappointed with this.... help us.....

  • I was updating to ios7 and my phone turned off and now it wont turn back on. it shows the apple sign but it slowly fades away and so on. Help!

    i was updating to ios7 and my phone turned off and now it wont turn back on. it shows the apple sign but it slowly fades away and so on. Help!

    Hello there, RFJA2211.
    The following Knowledge Base article offers up some great troubleshooting steps for unexpected power off of your iOS device:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • With firefox and IE9, computer turn off and closing bt itself

    With IE9 and Firefox, computer turn off and closing by itself

    I see two possible causes:
    * '''outdated graphics drivers:''' Try to [[Safe Mode|run Firefox in Safe Mode]] and, if it works, [[How do I upgrade my graphics drivers?|update your graphics drivers]] or [[How do I upgrade my graphics drivers?#w_turning-off-hardware-acceleration|turn-off HW acceleration]].
    * '''malware:''' [[Is my Firefox problem a result of malware#w_how-do-i-get-rid-of-malware|Check for malware]].
    Please [[Updating Firefox|update also Firefox]].

  • I put my iphone to restore but the computer turned off and jammed it, what should I do to put it working?

    I put my iphone to restore but the computer turned off and jammed it, what should I do to put it working?

    Hi jonnym2132,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    If you are unable to update or restore your iPhone, follow these troubleshooting steps:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Cheers,
    - Judy

  • I did a factory reset on my late 2008 MacBook from a Snow Leopard disc. It installed fine, but as soon as I began to use the computer (safari) it froze. Couldn't even force quit. So I held down the power button to turn it off, and now it won't start up.

    I did a factory reset on my late 2008 MacBook from a Snow Leopard disc. It installed fine, but as soon as I began to use the computer (safari) it froze. Couldn't even force quit. So I held down the power button to turn it off, and now it won't start up. It goes to the grey Apple screen and just sits there loud as can be. Help! Please keep in mind I've not done anything like this before and am going to need a little hand-holding. Thanks in advance.

    Hi. Don't worry it's nothing serious. Insert the Instal Disc (Snow Leopard) and press the C button while turning on the computer. Once you see the desktop, go to Utility and choose Disk Utility. Select the Macintosh Partition on the left window pane and then click on Repair Disk and Repair Disk Permissions on the bottom right corner. Wait for both processes to finish. Click on the Apple icon (top left corner) and choose quit. Your computer should restart. See if it reboots normally. If not you can always reinstall the OS following the same steps. Good luck!

  • HT1941 While working in word computer turned off and started beeping

    Okay, I was working on a word program and the computer turned off and started beeping. And doesn't respond to anything

    Sounds like hardware failure. Take it in for service.

  • My ipod froze then turned off and now will not turn back on

    my ipod was fully charged and was working perfectly.
    i locked it and when i tried to unlock it my touch screen wouldnt work.
    i tried reseting it by pressing the home button and the power button.
    it started to reboot then froze on the apple logo screen.
    after waiting for twenty minutes or so i tried reseting it again while it was still on the apple logo screen,
    then it turned off and now will not turn back on.
    i have tried plugging it into my computer to see if it would by some miracle turn back on but i have been unsuccessful
    my ipod is my life, if anyone can help me fix it i would greatly appriciate it!!!!!!!!

    See Here first...
    Frozen or unresponsive iPod touch
    If no joy... See here
    Unable to Update or Restore
    http://support.apple.com/kb/HT1808

  • My Internet was messing up so I turned it off and on. It still wouldn't work so I turned my iPhone off and now it won't come back on. What can I do to fix it?

    I was trying to fix the internet on my iPhone so I turned it off and back on, then it still wouldn't work so I i turned my iPhone off and now it won't turn back on. Now when it's plugged into the wall or the computer the Apple Logo comes up for about 6 seconds and turns off, then back on for another 6 seconds then turns off again and it just repeats, and it really frustrates me. What can I do to fix it?

    I had a similar issue with my phone.....it just shut off and wouldn't come back on even thought it was charged.  My daughter toggled the mute switch several times and then she pressed and held down the home and lock buttons.  It worked......would be worth a shot.

Maybe you are looking for

  • Satellite A355-S6879 Static in speakers

    My Satellite laptop is about 1 year old. I have about 3 weeks left of warranty on it. About 1 month ago, I could hear an annoying static-like, crackling sound coming out of the speakers. I took it to an authorized repair facility close to my home and

  • Substitution for miro

    HI i need to substitute amount and quantity fields at line item level in miro can ny1 suggest how to achieve this using substitution.. tcode for mm substitutions? OR NY OTHER USER EXIT DAT 'LL FULFILL MY REQUIREMENT? points 'll b rewarded. Message wa

  • Function Module to Update Inbound Idoc

    Please let me know is there any Function Module is there to update invound idoc to data base Thanks Umesh

  • Determining frame requested by After Effect (AEGP Plugin)

    Hi, I am writing Source Generator(AEIO)(File Importer) plugin for Adobe After Effect. Frames from file are to provided in AEIO_DrawSparseFrame callback. But AEIO_DrawSparseFrame does not tell which frame it wants. Also if we treat tr as current frame

  • Automatic Site Wide Client Upgrade To R2

    I know if I run the wizard manually to I can select "Always install the client software" to upgrade the client from SP1 to R2 but if I turn on site wide push will existing SP1 clients upgrade to R2?