Updated my iPad to lastest version, when using one of the app I have on the iPad not all of the pages work. One page I go onto it flip straight back to the main menu. Any one know how to correct this.
II'm a driving instructor using an iPad with an app for instructing, since the update version done on Friday the app won't work on all pages, the payment page just flicks back to main menu on the iPad, can't work out how or why. Anyone got some answers.
IT work perfectly fine before the update.
It also cannot be detected on any of my computers when I try to plug it in and use iTunes.
How did you load the 18 songs, if you cannot get iTunes to recognize it?
Similar Messages
-
am trying to set my background setting to change when ever I log in, I clicked on both 'change picture' and 'random order' boxes as my settings, but when ever I log in it has the same background as before. Does any body know how to fix this?
You have to enter the Apple ID and password. You are running into the Activation Lock
iCloud: Find My iPhone Activation Lock in iOS 7
Is there a way to find my Apple ID Name if I can't remember it?
Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information. -
I did the 5.1.1 update over wifi, had update issues, then updated on Itunes no problem, now my phone continues to freeze and restart, any suggestions on how to correct this - thank you
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Has any of this been tried?
-
Hey Guys i have a problem with my mac since last month and it wont boot up it freezes in a grey apple logo and and spinning gear any body know how to fix this?
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Before reconnecting an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode.* The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see above for instructions.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it produces. Look for the line "Permissions repaired successfully" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. -
I unstalled Photoshop Elements 12 from my computer andnow when I'm trying to re-install I'm getting an error message "objext already exist". Any suggestions on how to correct this?
jgbrph
If your program is Photoshop Elements 12, then you have posted in the wrong forum. Your thread is now in the Adobe Premiere Elements Forum (video editing).
Please re-post your question in the Adobe Photoshop Elements Forum or wait for a moderator here to see your thread here and move it from here to there.
Photoshop Elements
While you are making your move, consider
a. what computer operating system is involved...if we assume Windows
b. have you checked Control Panel/Programs to assure that the program is no longer listed as an installed program?
If it is no longer installed, you might want to consider a free ccleaner run through (regular cleaner and registry cleaner parts) to get
rid of any leftovers from incomplete installs and uninstalls. Then reinstall with antivirus and firewall(s) disabled.
ATR -
I own the 4s and my BT Planttronics Pro works fine with calls but does not work to listen to music?
Any ideas on how to correct this?
Thanks-VitaleyesI don't know what they call it, but my plantronics voyager pro, and my wifes plantronics voyager pro+ will not let you hear music through the headset. My Blueant T1 does support it and plays the music through the deadset.
-
When I try to order a book in iPhoto it says I have empty frames on pages. But I don't. Any advice on how to correct this so I can order this book? Thanks.
You do have one or more empty photo frames. Most often it will be a full page photo page missing behind a placed full page photo. To find it you need to go through you'd book and look behind each full page photo
LN -
My iMac is connected to a Brother printer. I have Snow Leopard 10.7.3 As of yesterday, when I try to print a PDF it prints as a blank black page. Does anyone know how to correct this so that the PDF will print as I see it on screen?
If you are running Mac OS X 10.7.3 then you have Lion installed, not Snow Leopard. It's probably not important to this discussion, but something you should be aware of.
What application are you printing the PDF files from? Have you tried opening the PDF file using the Preview application that can be found in the Applications folder? Does the issue still occur? Have you tried other PDF files from a different source?
Another poster in the following discussion thread reported that this method resolved their black blank PDF issue when viewing (and presumably printing) PDF files from Safari.
https://discussions.apple.com/thread/3890509?start=0&tstart=0
This solved my question by mcbuffy on Apr 20, 2012 11:29 AM
There's a solution if you want to see the PDF inside Safari's window :
Go to the folder : Your Hard Drive / Library / Internet Plug-ins.
If you see a file with PDF in its name drag it to the trash.
Quit and restart Safari to test with a PDF.
If it works you can empty the trash. -
My first post to the Apple Support Community so it looks like all I wanted to know is covered in the title. The research I have done led me to solutions that I am not comfortable trying for fear of irreparably damaging my keyboard and/or Mac mini. Does anyone have a simpler solution? Please? Hellooooo?
Just in case the title is too long to show, I have re-pasted here:
The volume keys on my Logitech K760 wireless keyboard do not work with my 2.3 GHz, Intel Core i5 Mac mini which runs Mac OS X 10.7.4. Anyone know how to correct this without having to re-code firmware?BDAqua wrote:
Hello & welcome to the Forums!
I think Spark cured this for another person and the same problem...
http://www.shadowlab.org/Software/spark.php
http://scripts.sil.org/cms/scripts/page.php?site_id=nrsi&id=ukelele
http://doublecommand.sourceforge.net/
Thank you for the response. Unfortunately, I could not figure out how to work the above applications. I thought that i had managed to assign the appropriate function keys in Spark to their volume counterparts, but it had no effect. Below is a screen shot. Do you see anything amiss? -
I recently upgraded my software and now when I click on a document in an email it wont automatically open - does any superstar know how to fix this? Thanks in advance!
Have you installed something called "CleanMyMac?"
-
I have an Iphone 3gs and cannot send text messages to my wife. She is the only person that I cannot send or receive text messages from. Does anyone know how to correct this?
We both have AT&T service. She has an Iphone 4s, I have the 3gs.
-
HT204074 how to assess the apps i have on my ipad with my iphone 5s
how to assess the apps i have on my ipad with my iphone 5s
If universal, just re-download them to your phone, or sync them from your iTunes library.
-
I am trying to upgrade from Tiger to Snow Leopard. When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed. Does anyone know how to correct this (since Tiger doesn't have Time Machine)?
http://support.apple.com/kb/TS2986
-
On my screen my iChat name shows as my AIM handle, but other people are showing a completely different name. Anyone know how to correct this?
Hi,
I still have you in my Buddy list.
Whereas you were showing just plain "Norma" you are now showing "Norma Howe" in Capital Letters.
The only way I know to achieve that at my end is to View any Display Name that was set up or Add those "First Name, Last Name" Details to my address Book and list your Screen Name against them.
IF the AIM Settings Display Name items does not List NORMA HOWE and in fact lists something else the only thing I can think of is another App allows the Display name to be set from there and this is overriding the AIM Setting info.
I fired up an old version of AIM for Mac (version 4.7 from 2005) on my G4 computer running Leopard.
This Identifies Buddies that have entered Display Names (puts them in the Quotes as in "NORMA HOWE")
In the Preferences of this version of AIM for Mac it has a Sign On tab.
This has a box to enter how you show up (i.e. the Display Name) This version hints at adding Capitalisation and Spaces to your Screen Name.
Actually when I tried to change it to anything this version refused to let me.
So I changed my regular Name to "Ralph Johns r"
This however does not change the AIM settings page
Uploaded with Skitch!
This would suggest that if the AIM setting page does not have this info then it is an AIM app somewhere.
Boot Camp and windows Version ?
AIM for Mac (Any versions) ? (I am prettry sure it will be alter version than mine as the Self Listing shows the changed Name but still lists it as the Screen Name in the info Screen)
AIM on a Phone or iPad ?
8:38 PM Thursday; April 5, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
I am using system 10.7.3 and my I photo 9.2.3 keeps crashing upon start up. Does anyone know how to correct this without losing my photos?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Step 1
Enter the name of the crashed application or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the contents — again, the text, not a screenshot. For privacy’s sake, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall or hang logs — they're very long and not helpful.
Maybe you are looking for
-
Where can I find a tutorial for the Canon Pixma MG6220
I am unable to make full use of the Canon Pixme MG6220 I purchased a few weeks ago. I am an 85 year old geezer and my old printer was pretty straight forward but had limited features whereas this Pixma 6220 is a great machine but I find it most intim
-
Auto brightness of iPad mini retina is not working after 7.1.1 update
Auto brightness of my iPad mini retina has stopped working after iOS 7.1.1 update. The brightness neither automatically reduces nor does it increases as per the change in ambient light conditions. I have ensured that auto brightness is ON still nothi
-
Cannot install Windows XP over Windows 7 on an HP Elite 2540p laptop
Receives a blue screen error as soon as all system files are loaded and the message "Installing Windows" comes up. Tried installing first from XP Pro OEM CD, and from HP CD. Both with same results. Hard drive had Windows 7 originally. This questio
-
HELP NEEDED!!! BIOS hangs, is my board dead?
It is probably my fault for trying to install a custom bios but I acknowledge the fact that I was stupid. At POST it will hang after Auto detection of my drives. According to the D-Bracket it hangs at Initializing Floppy Drive Controller but it never
-
LabVIEW cannot recognize all functions in dll.....
The shared library contains 118 function(s). The declarations of 77 function(s) are found and recognized in the header file and these function(s) can be wrapped. The remaining function(s) cannot be wrapped. If you want to import these functions, plea