Updated my iphone 4 now it will not unlock with pass code

Updated my iphone 4 with latest ios now it will not unlock with pass code.;

Enter the correct passcode and the device will unlock every single time.
If the passcode has been forgotten, restore the device via iTunes on the computer.

Similar Messages

  • HT4623 Hi, I have taken over my daughters iphone 3gs and updated it and restored iphone but now it will not configure with my itunes or the original sim that was in it, saying "the activation server is temporarily unavailable. And will not connect to itun

    Hi I have taken my daughters iphone and wiped it and resetted it but it will now not let me activate it via itunes and will not even go onto the home screen of the phone so i can go to settings etc and i do not know what to do to enable the phone to be activated

    "We're Sorry, Activation Server Temporarily Unavailable, contact Customer Care?"
    99.9% of the time, the cause of this issue is the fact the phone was jailbroken/hacked to unlock it for use on networks other than the network the phone was originally locked to. Apple maintains a database of officially unlocked iPhones, and when Apple's servers detect phones such as yours, activation stops & you get the message you got.
    So, you need to get a sim card from the carrier the phone was originally locked to, or get it officially unlocked, if you want to activate it. Because it appears that it was not officially unlocked.

  • Installed new itunes update and now it will not sync with outlook

    installed new itunes update and now it will not sync with outlook. it says it will only do it through the Icloud. How can i change it

    Hello xtremejoe
    I find that changing some settings in your syncing options will get syncing working again, like enabling Manually manage music and videos.
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12313
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Hello, I just downloaded ios 8 for my 4s iphone and now it will not connect to itunes on my mac. Any help will be greatly appreciated.

    Hello, I just downloaded ios 8 for my 4s iphone and now it will not connect to itunes on my mac. Any help will be greatly appreciated.

    Hello wedge60,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning device recognition issues:
    iOS: Device not recognized in iTunes for OS X
    Follow these steps to resolve your issue:
    If you haven't connected your iOS device to this computer before, unlock the device and tap Trust. Learn more about the Trust This Computer alert.
    Restart your iOS device.
    Restart your Mac.
    Make sure that your Mac meets the minimum system requirements for your iPhone, iPad, or iPod touch.
    Install software updates on your Mac.
    If an iTunes update is available, apply the update.
    Check USB connections. iOS devices need USB 2.0 to work properly. If you're not sure your Mac has USB 2.0 ports, check the computer's specifications.
    Disconnect other USB devices and connect your device directly to a USB port on your Mac.
    Try another USB cable.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • HT4922 Downloaded 5.1.1. to my iphone. Now, Safari will not connect to my server.  Can not download web pages and many of my apps. Running very slow sluggish! Is there a fix? Sound like other users are experiencing same problems.  Anyone have a solution?

    Downloaded 5.1.1 to my iphone. Now, Safari will not connect to my server. Can not download web pages and many of my apps. Email seems to be ok. iphone running slow and sluggish.  I have read several other users have experienced the same problem. Any solutions?

    Basic troubleshooting steps oultlined in the User Guide are restart, reset, restore from backup, restore as new device.
    You need to go through all steps in succession until your problem is solved.  If going through ALL these steps fails to resolve your issue, then you'll need to bring your phone into Apple for evaluation and possible replacement.

  • I reset my iPhone 5 now it will not go pass the activation part. It keeps saying activation error

    I reset my iPhone 5 now it will not go pass the activation part. It keeps saying activation error

    is your iphone jailbroken?

  • Did update to Dreamweaver CC 2014.1 on 10.8.5 now dw will not open with ?

    did update to Dreamweaver CC 2014.1 on 10.8.5 now dw will not open with ?

    Hi Robin,
    Can you update to the latest version? Also, do you have Java SE6 installed on your computer?
    Thanks,
    Preran

  • HT1386 I was trying to update my iphone and now I can not activate it, it says no sim card installed

    I was trying to update my iphone and now I can not activate it, it says no sim card installed.
    What can I do now, help please.

    Ntmate68 wrote:
    it's stuck on a screen that has a iTune and plug picture
    See Here  >  http://support.apple.com/kb/HT1808
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup
    http://support.apple.com/kb/ht1766

  • Since updating my iPhone 3GS my music will not sync. I keep getting error 13019

    Since updating my iPhone 3GS my music will not sync. I keep getting an error message 13019.. I tried everything ..

    http://support.apple.com/kb/TS2830

  • I restored my iphone but now it will not power on fully.  The Itunes plugin appears.  I plug it in and restore as requested but the phone never restarts like it says it will.  I have done this several times now but nothing. Suggestions?

    I restored my iphone but now it will not power on fully.  The Itunes plugin appears.  I plug it in and restore as requested but the phone never restarts like it says it will.  I have done this several times now but nothing. Suggestions?

    Sounds like time to take it back to Apple for repair.
    Allan

  • I just loaded the new version of iTunes on the PC and now iTunes will not sync with either the iPod or iPhone.  Any suggestions

    I just loaded the new version of iTunes on my PC and now iTunes will not sync with either the iPod or iPhone.  Any suggestions

    Hello there, Duane Harris.
    The following Knowledge Base article provides in-depth troubleshooting steps for resolving your issue:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • Since Mavericks update my iPhone and iPad calendars are NOT syncing with the calendar on my MacBook Pro

    Since Mavericks update my iPhone and iPad calendars
    are NOT syncing with the calendar on my MacBook Pro.
    I used to use iTunes but don't see the options now.
    Does anyone know how to set up a sync.?

    I have temporarily solved the sync problem by using an older MBAir running snow leopard, I exported
    both calendar and contacts and imported them in the MBA and synced normally.
    Since I'm not about to send my data on the cloud, or setup a server to just sync my iphone,
    I think this is a good workaround ! BTW I stopped updating my contacts and calendar on the MB, I only
    update the iphone until a permanent solution is found !
    And they better come up with one soon, because I'll just switch to an Android phone and Ubuntu linux for my MBP, Apple should make our lives easier, not harder !
    I'm sure Samsung is having a ball ever since the sync issue was made public !
    Hopefully Apple is listening and will make things right again !

  • HT201401 My iphone will NOT unlock with my CORRECT passcode.

    My iphone will NOT unlock with my CORRECT passcode.  I can't even backup and restore on itunes because it's locked.  What can I do?  Does anyone have experience with this and know how to fix it?

    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
    A Complete Guide to Recover Your iDevice if You Forget Your Passcode
    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • Restored Ipod now Itunes will not sync with Ipod music shows to be in library

    Restored ipod, now Itunes will not sync with ipod, music still shows to be in my library. Ipod does show to be under a new name.  How do I get the music back on ipod. note Ipod is classic modle

    Hello Cobre,
    After reviewing your post, I have located an article that can help in this situation. It contains helpful advice concerning syncing:
    iTunes: Syncing media content to iPod
    http://support.apple.com/kb/ht1351
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Silverlight 5 WebBrowser Control - Is the SL5 WebBrowser control is set to work in IE7 mode only? I have a 3rd party web site i'm hosting and now they will not work with IE 7 Compatibility mode. Looks like this control can't detect I'm setup for IE 9.

    Silverlight 5 WebBrowser Control - Is the SL5 WebBrowser control is set to work in IE7 mode only? I have a 3rd party web site I'm hosting and now they will not work with IE 7 Compatibility mode. Looks like this control can't detect I'm setup for IE 9. I'm
    running IE 11 with registry hack for IE 9. I think the SL5 webbrowser control is set to work only in IE 7. can some one verify this or tell me how to set the WebBrowser control up to run either IE8, 9, 10 or 11? I have same issue with machines running IE 8
    and above. This Silverlight 5 application is running out of browser with the elevated privileges (hack) and at test certificates install in proper stores. This application has been running for 2.5 years. Vender switch on some changes a couple days ago that
    broke this application. Help!!

    Hi,
    It seems there is nothing to do with IE mode.
    Please make sure your link still can be accessed.
    The WebBrowser displays HTML content in applications running in a Silverlight 4 or later out-of-browser applications or in Silverlight 5 in-browser trusted applications only.
    For more infromation,please check link below:
    http://msdn.microsoft.com/en-us/library/system.windows.controls.webbrowser(v=vs.95).aspx
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

Maybe you are looking for

  • Determine the current page of pdf

    In my VI I load a pdf into an activeX container. I would like to be able to progammatically determine which page is currently being viewed.  I have looked throught the various property classes and method classes for the adobe pdf reader and can't fin

  • Howto implement hand-rolled locking with SQL?

    Hi there, For now I used java.util.Concurrent's classes for locking critical sections which should only be modified/read by a client at a time. However now one customer would like to cluster our app and I wonder wether the locking could also be done

  • Setting time in  adf-faces-config.xml configuration file

    Hello check this link http://jdevadf.oracle.com/adf-richclient-demo/docs/tagdoc/af_convertDateTime.html this specifies "Timezone can be set per web-app in adf-faces-config.xml configuration file. If timeZone is not set on the converter, then timezone

  • Editing audio after extracting it

    Hi, had a quick browse and not sure if this has been dealt with in the forum but...... I have a video of a performance which I now just want to make an audio file from and so I extracted all audio from all clips first before working into it. It seems

  • Improved Search on Google.....

    I have built separate webites for my two Daughters. I own the .com, .co.uk, and .me urls for both sites, however when I search for their names on Google I do not get a hit until page 3/4 of the search results. The question is, how do I improve their