Updated my K450e to Windows 10, Realtek Audio Manager icon missing from system tray

When my K450e was using Windows 8 and 8.1, there was a red Realtek AudioHD Manager icon in my system tray. Now that I've updated the K450e to Windows 10, there is no Realtek Audio Manager icon in my system tray (or control panel) anymore. I've tried installing the Realtek Audio software both from the Lenovo download site for Windows 10, and also from the Realtek site. This has not helped. On the up side, the computer's audio is working fine *smile*. Any ideas what I might try to get the Realtek AudioHD manager icon back in the system tray for Windows 10? Thanks!

Macaby there are two separate components of Boot Camp. First is Assistant which runs on the Mac side of things from OS X. It creates/deletes the Windows partition which is necessary to install Windows. Next the Boot Camp Panel software which is installed once you have successfully installed and are running Windows. It allows tweaking of the Apple hardware from within Windows. It is installed using the OS X disc and does not jeopardize your installed Windows OS in any way. This disc also contains the hardware driver necessary to optimize the hardware in Windows. In my experience this disc has never started via autorun so you will most likely have to locate the Boot Camp folder and run the setup.exe file manually.
Don't know how much your wife uses Windows but if it's running well enough then you may want to leave it alone. Check device manager in Windows for any red or yellow punctuation marks. This will indicate a potential driver issue in Windows. Also check the Windows Experience Index for performance issues. A 1 anywhere indicates a driver issue. If you have no driver issues and Windows is running well enough you may want to leave it at that.

Similar Messages

T440s Windows 10 Realtek Audio restart loop

Have downloaded the latest windows 10 realtek audio driver from the lenovo site and when you install the driver there is a message like "driver installation is a 2 step process, 1) uninstall current driver and restart 2) install new driver" The uninstall works and the restart happens, but after booting up again the new driver does not install - instead the exact same window comes up about the uninstallation, resulting in an endless restart loop. Any fixes ?

The installation of the driver mentioned in the topic fails both in automatic procedure started from the Device Manager as well as in the installation wizard. Device Manager fails with timeout and the wizard fails with 0xC0000374 which seams to
be some kind of heap corruption.
Please see if the link below can be of any help. It has helped quite a few users with Realtek HD audio driver installation problem .......
How to fix: Realtek Audio Driver Wont Install - Error Code 0x000005b4 displayed, or driver update process times out
http://kb.stonegroup.co.uk/index.php?View=entry&EntryID=289

My iTunes update install failed. Error message says MSVCR80.dll is missing from my comuputer. What is that and where do I get it?

My iTunes update install failed. Error message says MSVCR80.dll is missing from my comuputer. What is that and where do I get it?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

I just updated my iPhone 4s to iOS8 and the weather is missing from my notification center. Where has it gone and how do I get it back?

I just updated my iPhone 4s to iOS8 and the weather is missing from my notification center. Where has it gone and how do I get it back?

Scroll down on the Notification page and there is a button at the bottom
labelled 'Edit'. Tap that button and you can add the weather back as well
as choose other things to display.

MSI Z77A-G43 Realtek Audio Manager

Hello,
I just bought a MSI Z77-G43 motherboard and I did a clean installation of Windows 7 Ultimate 64bit and when it started up the audio was already working which is normal. Then I installed the basic drivers (chipset,lan,audio).(Ok just so you know the situation)
Now the volume changes on the new Realtek software are working, but the EQ presets, Graphic EQ, Environment settings, Voice Cancellation and Karaoke settings are not working. So basically the whole "Sound Effects" tab is not doing anything to the sound when being adjusted.
What could the problem be here ? (And how do I add a picture to this message, I have a screen shot)

Yes it's a shame that one cannot just use Realtek audio drivers but have to use the audio program too. I have tried to extract and install only the drivers but it always wants the software as well. And I haven't find those driver only from nowhere without the software studio.
That's why I'm using MS drivers, luckily, those work perfect with my 5.1 set up.
If anyone knows where to get just the audio driver without the software please post link here.

[SOLVED]KDE does not remember window state, restoring from System Tray

Hi,
I'm facing a problem with some KDE applications that dock in the system tray, like Amarok and Konversation. I like to keep these apps maximized. But when I restore them from the system tray, they always revert back to their original, unmaximized size. Is there any workaround or fix for this?
Using KDE 4.3.4-2 (not KDEmod)
Thanks.
Last edited by codemon (2009-12-08 08:56:16)

Funny thing happened. I tried out your suggestion for my Firefox window, which would always start in an un-maximized state. It worked perfectly. Then I opened up Konversation and Amarok, and found that they properly remember the window state now!
Thanks for the help.

Iphone 4s icon missing from windows 7 64bit

when my iphone 4s is plugged into my computer running windows 7 64bit, the apple icon doesn't show up. instead, a generic camera icon shows up. is there a way to fix this?
thank you!

Possibly. The only thing I could think to tell you is to Google and find an icon you'd like to use, and then navigate to c:\\windows\\system32\\Shell32.dll (back this file up immediately) then use a program like 7zip to extract all of the contents, put your custom icon in and rename it what the default portable device icon is named (you'll have to rename that one something else first), and then re-compress the whole package and paste it into the system 32 folder (make sure it is named the same thing as the original dll, and then it should give you that pop-up window, click replace) and then hope it works. If not, get rid of the modification immediately and replace it with the original, so as to not induce a fatal exception and blue-screen your PC.

Audio tracks suddenly missing from capture... need help!

Hi! I have been capturing video (with audio) successfully and routinely for months now. Suddenly, though, when I capture video... from the same device, with the same preset... the clips have only 1 Video track, and no Audio tracks. My camera is still recording audio (and I still hear it during the capture), but the audio tracks just aren't there in the resultant clip. It seems to me like FCE has just decided not to capture audio, as if to say "pffft... we don't need that." But why this happened is beyond me!
Even within this same project, I have other clips captured with audio just fine. I didn't even realize it was an option NOT to capture audio. There aren't any settings to that effect in the Capture window... i.e. there's nothing to turn OFF, so I don't know how to turn it back ON! HELP! How do I get audio back on my captured clips? Is there a way to toggle this? How can I possibly be getting video without audio when the preset has already been working for this device?
Things seemed to change once I started using the Voice Over tool. After that, none of my captured clips have audio. Something I did on or around that time changed FCE internally. I combed through the manual but didn't see any leads. They assume if you have the right preset, it'll just work. No mention of disabling audio.
Please help, because I'm just about ready to throw my Mac throw the wall. I even tried reinstalling FCE, just to get it back to the previous state, but it didn't help.
P.S. I also haven't changed anything on my camera that would affect audio. I feel this is just a setting somewhere in FCE that I can't find and don't even know where to look for it...
Thanks in advance!!

Hi. Where should I look for them? I haven't had much success finding things on my own, so please spell it out for me.
I just find this so odd... it would be one thing for the tracks to be silent or garbled, then I would think this was a cable issue or the camera. But I can't even imagine why the audio tracks would just not be there. If I saw a preference for "Video Only Capture" somewhere, it would make sense.
Anyway, thanks. Please tell me where there's a prefs file, and I'll roast it.

How to delete an update icon in the system tray?

I have an icon for an update to Bibg Bar, which I don't want and will only install into IE, which I don't have.
How do I get rid of it?

Thank you so much for the prompt reply.
I have flushed the system restore points as sugested. But running the same SPYWARE DOCTOR program to scan the computer is appearing to be a tedious task! I have recieved blue screen errors for three consecutive times mid-way during the full system scans. The latest one being, "driver caused error in memory pool destined for disk use", exactly which I could not read, the system restarted immediately.
history of the machine:
norton anitvirus 2005 crashed during an update around the 20th march,2011. the live update said that the virus definitions were corrupted. I used norton removal tool. I downloaded the Norton antivirus2011 from its website. Initially it worked well but later it also crashed. Looking in the hardware section for a faulty driver, it highlighted two such drivers:
BHDrvx86 and Symantec iron Driver. After removing Symantec products completely , these drivers vanished!
I have tried MS essentials and ENod32 by d/l the trial version from their websites. however, the same result.
Using the PC Doctor tool through the service partition showed error in the memory and the dvdwriter. However, the drive reads the HP printer s/w but does not read the original music CDs!!
I had also updated my Service partition by d/l the R&R new version in january. The computer did not behave as erratically before doing this. Is it possible that a virus was introduced into the service partition and hence the memory is giving me errors?
please help me out.!

10.2 update - after exiting folder, my bottom phone/search/camera icons missing

After I updated my Z10 a couple weeks ago, I started noticing that after I click on a folder I created to store my app icons and then exit the folder, my bottom 3 basic icons are missing and will not return till I reboot. When I click the center of the area that had the icons, a blue line appears just above the center area and if I hold it a "rename folder" box appears. Is this a known glitch or am I just lucky?

I'm having the same issue. Did you ever find a solution?

HT2479 I recently updated the iMovie app and now all my events are missing from the event library, although they seem to be on the external hard drive...how do I restore all the clips (I have begun to edit the clips down) I am a recent PC convert, thanks

I just updated the imovie app and all the clips from the event library are now missing, although they seem to be on the external hard drive...I am a new mac user, so please help...thanks...

I just updated the imovie app and all the clips from the event library are now missing, although they seem to be on the external hard drive...I am a new mac user, so please help...thanks...

Updated iPad 2 to 7.1 and all apps are missing from iPad

I updated iPad 2 to 7.1 and iPad is non-responsive and missing all my apps

Hi Happy25y!
Here are some basic steps for troubleshooting your iPad:
iPad: Basic troubleshooting
http://support.apple.com/kb/ts3274
You may need to restore your iPad if you cannot get it to respond. Here is an article with the best way to restore an unresponsive iPad:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
You can re-download your purchased apps by following the steps in this article:
Download past purchases
http://support.apple.com/kb/ht2519
Thanks for using the Apple Support Communities!
Cheers,
Braden

Text missing from system preferences permissions window

I recently changed the short name on a 2009 (I think) Mac running OS 10.6.3. Everything transfered over fine, but when I went to disable the root user, the window asking the username and password appears completely blank (see picture below).
It's only happening with one user and only within systems preferences. I can select the different fields, but the text is not visible. However, I have been able to enter the information and proceed to unlocking the area.
If anyone out there knows how to fix this, your help and knowledge will be much appreciated!!
Thanks,
Casey

Back up all data.
Launch the Font Book application and validate all fonts. You must select the fonts in order to validate them. See the built-in help and this support article for instructions. If Font Book finds any issues, resolve them, then boot in safe mode to rebuild the font caches. Boot again as usual and test.

I am not able to use internet in i-phone 4s turbo after updating it ios6 to ios8 n some option is also missing from my phone like enable 3g and APN

plz help me out of it am very much frustated of it

You have hacked your phone with Turbo SIM. You cannot get any help here for hacked phones. Contact the place/person who sold you the SIM. Surely, they have support services, don't they?

Webcam icon missing from desktop on windows 7

hi
i no longer see the desktop icon. i use the webcam frequently to click images. the device manager shows the driver installed. how do i get the icon back on my desktop ??
pl help

Hi,
You can go to start\all programs and check if webcam program list in that, then right click the icon and send it to desktop.
In addition, reinstall the webcam driver can get the icon back.
Regards,
Leo Huang
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Updated my K450e to Windows 10, Realtek Audio Manager icon missing from system tray

Similar Messages

Maybe you are looking for