Updated newest Quicktime, now Core midi is unavaialble, help!

I updated the latest version of Itunes and Quicktime and now my midi drivers are unavailable and cannot connect my midi in Audio/midi setup.
Uninstalled and reinstalled M-Audio drivers for my Firewire Audiophile and did a repair disk permissions and still no midi connection.
Please advise.
Thanks.

Hey goofygirl2424,
Thanks for the question. I understand you are experiencing issues after updating your iPhone to iOS 7.0.6. If you have not already done so, you may want to restart or reset the device:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If the above steps do not resolve the issue, you'll want to restore your device with iTunes in recovery-mode:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks,
Matt M.

Similar Messages

  • Itunes updated files and now I'm locked out - help

    So I just plugged my Ipod classic into the PC to charge it and Itunes opens up and says 'updating files'.
    The old files (over 20gb of music and movies) are still on it, but it looks in the usage bar to have compartmentalized them off.
    It then copied the whole lot over again... so now all the same files are on it twice.
    And when I turn it on it has no files. No music, movies or the games i've downloaded. Nothing.
    2 days ago I logged into my apple account on Itunes and downloaded a game for the Ipod. It didn't try to update it then, and didn't earlier today when I plugged it in. But this time it did what I mentioned above.
    So now I can't access any of my music or movies on it. Help.
    Will I have to restore it and start again?
    EDIT: I've just plugged it in again, and it has added the 2nd lot to the compartmentalized files and tried to copy it all over again. So I forced it to stop syncing and ejected it.
    Message was edited by: fooffstarr

    Nevermind.
    I called the number on my warranty we ended up having to restore it and start over.
    Still don't know what caused the issue in the first place, so ill leave this marked as unanswered for now.
    If anyone knows why it would do it please let me know

  • Just updated tiger and now cannot get into Computer-HELP!!

    Was having issues with iPhoto and importing images. Would get the darkened screen telling me I needed to do a hard restart on the machine. Happened a couple of times, so fixed permissions to start and then ran a system update.
    Now, when I restart I get the password login screen (had automatic login enabled previously). The passwords for both accounts do not work and I know I'm typing them in properly. When I try to boot up of the CD to either reset the password or run disc utility, I get a DOS screen with words such as:
    Unable to find finder driver for this platform
    panic (CPU 0 caller
    no debugger configured
    panic: we are hanging here
    Has anyone else had access issues since running the latest Tiger updates?

    I'd imagine because of the fact that you had a hard drive problem and the system update touches system files... if they aren't written back correctly this could cause a huge problem.

  • I have updated iTunes and now even after following the help instructions, I am unable to convert songs to mp3 format.  Help !!!

    I cannot convert files to mp3 format after the latest iTunes program update.

    See:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • "The iPhone is already synced with another iTunes library" same imac but after update Snow leopard now have this problem? HELP

    I recently just had to re-install snow leopard on my imac. Thankfully I backed up all my music and re-imported everything from my old install to this one. However, when I go to sync my iPhone 4 I get the message that reads:
    "The iPhone is already synced with another iTunes library. Do you want to erase this iPhone and synch with this iTunes library?"
    It warns that doing so will erase my current iphone and replace the contents of it with the contents in my new iTunes library.
    I manage to back up photo in iPhoto, using iTune I Back up using control click mouse and get the back up button, but when I search my computer for the backup it cannot find it anywhere!!!!I I'm afraid to sync in fear of losing all my images and app data. want all mytext and other things to be safe
    please HELP

    You are trying to do the same thing as wj talks about in his user tip: https://discussions.apple.com/docs/DOC-3141

  • I just updated my mac book pro mid 2009. Now i can't play videos in youtube. when i play videos it freezes. Please i need help!!

    i just updated my mac book pro mid 2009 to OS X 10.8.4 and my safari to 6.0.5 . Now i can't play videos in youtube. when i play videos it freezes. Please i need help!!

    gabevdd wrote:
    i just updated my mac book pro mid 2009 to OS X 10.8.4 and my safari to 6.0.5 . Now i can't play videos in youtube. when i play videos it freezes. Please i need help!!
    Did you also update Adobe Flash Player to be compatible w/your new OS? 

  • TS5249 Core midi quit unexpectedly after updating garageband. solutions ?

    Core midi quit unexpectedly after updating garageband. solutions ?

    Open Console in Utilities & see if there are any clues or repeating messages when this happens.
    Might try this...
    http://www.hardmac.com/news/2004/01/26/garageband-startup-crash-fix

  • I tried installing an update to QuickTime. An error occurred and it wouldn't install. I tried removing the QuickTime program, but a window appeared telling me that a fatal error  ccurred during installation and I could not remove the program.  Now what?

    I tried installing an update to QuickTime. An error occurred and it wouldn't install. I tried removing the QuickTime program, but a window appeared telling me that a fatal error  ccurred during installation and I could not remove the program.  Now what?

    I tried removing the QuickTime program, but a window appeared telling me that a fatal error  ccurred during installation and I could not remove the program.
    I think we'd better see if some other application (other than QuickTime itself) has dropped old QuickTime componentry in the system files on the PC. (If there's a version mismatch between the old componentry and the "QuickTime proper" componentry, that can create those symptoms.)
    So we'll go looking for the older QuickTime componentry in the most common locations for it to be stashed.
    First we'll need to change some view options on the PC.
    1. Open My Computer from the desktop or Start menu.
    2. In the Tools menu, click Folder Options.
    3. Click the View tab.
    4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected, and the "Hide extensions for known file types" option is unchecked.
    5. Click OK.
    Now in My Computer, open your C drive.
    Open the "Windows" folder.
    Open the "system32" folder.
    What files and/or folders can you see in there with QuickTime in the file/folder name? (In a standard installation of QuickTime, you should see precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

  • We bought a time capsule then the wifi has a problem since it does not identify the existing wireless network and it says that its need to have an update firmware. The existing firmware is 7.3.1, does it have an newest update firmware existing now?

    We bought a time capsule, 1TB, then the wifi has a problem since it does not identify the existing wireless network and it says that its need to have an update firmware. The existing firmware is 7.3.1, does it have an newest update firmware existing now? Does APPLE do not provide latest firmware for this item?

    How old is that Time Capsule?  The fact that it still have firmware 7.3.1 suggests that it's not the latest model.  The latest firmware available for my two-year-old model is version 7.5.2.  Apple does provide firmware updates.  You just have to let the Time Capsule download and install them.  Use AirPort Utility to do that.
    Regarding your Wi-Fi problem, please explain what you mean by "it does not identify the existing wireless network".
    By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject.  In the future just type a short summary of your post into that field and type the whole message into the field below that.

  • Thunderbolt update V1.2 is not supported on my system: Mac Pro 12 Cores (mid 2012) with Mac OSX 10.8.3

    I'm trying to connect an external 8 Tera thunderbolt hard drive to my Mac Pro 12 Cores (mid 2012) with Mac OSX 10.8.3, and it is not recognizad, so I tried to make the thunderbolt upgrade V1.2, and a windows appears and says: "this software is not supported on my system"
    Please tell me waht to do.
    thanks a lot.

    Thunderbolt is a revolutionary I/O technology that supports high-resolution displays andhigh-performance data devices through a single, compact port. It sets new standards for speed, flexibility, and simplicity. And it’s on MacBook Air, MacBook Pro, iMac, and Mac mini.
    I don't see mention of the Mac Pro.

  • I have a Mac Pro Intel Xeon 3.2 Ghz Quad core (mid 2012) using OSX 10.7.5) and cannot get iDVD to run.

    I have a Mac Pro Intel Xeon 3.2 Ghz Quad core (mid 2012) using OSX 10.7.5) and cannot get iDVD to run. I tried 7.0.4 and 7.1.2, both from Apple software update and both crash during "loading themes". I am reluctant to upgrade OSX from 10.7.5 because I do not want to loose Final Cut Express 4.0.1. Apple Care no longer supports iDVD. I want a version if iDVD that supports Chapter markers as in iDVD 7.?.? that i used with my old (now deceased) Apple Power PC Mac Pro.

    iDVD 7 should work fine with 10.7.5.  Try this basic troubleshooting fix:
    1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
    User/Home/Library/ Preferences folder.
    2 - delete IDVD'S cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iDVD folder. 
    3 - launch IDVD and try again.
    NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
    OT

  • Do not update Proapps Quicktime Codecs 1.0.4 on Mavericks

    Hi there,
    I'm on a nMac Pro, 12 core, 64GB RAM Mavericks 10.9.1 and the latest versions of AE and Premiere.
    I recently (today) updated my Quicktime proapps codecs from 1.0.3 to 1.0.4 at the prompting of Apple updater and it has broken AE and Premiere.
    The Adobe QT32 server does not respond once either of these apps are opened and when I try to save my project in AE, the save dialogue gets to about 50-80% and then I get the spinning wheel of death, the system freezes up (although not completely, I can still move things around a bit and the clock still ticks forward) and I have to hard restart.
    I'm on the phone with Apple Care right now trying to figure out a way to revert back to 1.0.3.
    Any help with that process would be appreciated.  I can't find Proapps Quicktime codecs 1.0.3 anywhere on the web.

    "At this point do you think the problems are related? In other words, would the same problem have occurred if you did not install the ProApp codecs update?"
    I think that's a safe assumption. I have a 100% motion graphics comp that I've been working on that AE chews through pretty easily in multicore, it think it's just not digging the ProRes.  I did have a mograph comp that AE was chewing through, but not anymore :/  This was on my internal drive though, soooo. . .
    There may also be an IO component at work here as well.  I'm not working off internal drive on the Mac Pro, rather a USB3 external and I was reading and writing to the same drive.  I'm going to try writing to the internal and see if that doesn't alieveate things a bit.
    So now it's just spinning wheels of death all the time.  I'm trying to view a single frame in the comp panel after adjusting and replacing some footage in a screen fill pre-comp and it's just hanging.  I've pressed caps lock to try and free it up, not working.  Nothing is really working.
    I've adjusted the RAM settings, allocating more RAM to background processes.  I've probably hard restarted my machine twenty times today.
    I'm turning off multicore completely.  What a let down today was.

  • Leopard Broke Core Midi?

    Hello everyone,
    I'm new here so I apologise if I was not able to find a thread that already answers my question.
    I just upgraded my Imac (Intel) to Leopard, and Core Midi now no longer responds. I tried getting rid of my midi drivers and re installing, but core midi will still not launch. (it says so in the Audio/Midi utility. Has anyone had any midi problems with leopard? Does anyone know of a way for me to get core midi working again, I need it for a project for school. I did the dvd update from Tiger, not sure what else you guys might need me to tell you.
    Thanks for your help
    ~ YYZ

    After re-reading my response, perhaps I wasn't clear. How about this:
    1. Open he hard drive by double clicking it's icon.
    2. Open the Library folder.
    3. Open the Audio folder.
    4. Open the MIDI Drivers folder.
    5. Remove all MIDI drivers.
    6. Reinstall correct driver that's Leopard compatible for your MIDI interface.
    7. Restart the computer.
    8. Open the Audio MIDI Setup application in the Utilities folder (within the Applications folder).
    9. Run the program and set up MIDI.
    This should work as long as the MIDI drivers are Leopard compatible. It worked for me.

  • Problems with EFI Firmware Update to 1.5 for mid 2010 Mac Pro, and sleep issues

    Hello to the community, I have run into an annoying issue.
    I need to update the EFI firmware on my 8 core mid-2010 Mac Pro. I downloaded the EFI update from the apple website from here : http://support.apple.com/kb/DL1321
    But everytime I download it, as I click to install, it gives me the message:
    Alert
    This software is not supported on your system.
    But clearly this is the correct EFI for my computer. I tried burning the Firmware restoration onto a CD from here:
    http://support.apple.com/kb/DL1320
    But the computer did not respond the way it said it should (with the 3 flashes/beeps etc.) and have the optical drive open for the CD.
    So I'm completely stuck.
    *Also my Mac Pro had issues with sleep, when I put it to sleep, sometimes when I try to bring it back, it restarts itself, and other times, it just turns itself on and the monitor screen remains black, so I have to hit the power button to turn it off then back on again. This only happnens when the computer has been put to sleep for a slightly extended period of time, roughly 20mins +, sometimes longer.  I was trying to solve this problem by first updating the firmware because I think it could be related to that, but I've had this problem with the firmware so I couldn't find out. This is actually the bigger problem for me because it will affect my work. I am currently using an iMac while I fix up this mac pro.
    I'm a music composer so I've upgraded many aspects of my system due to work. I have a 1TB Samsung 840 evo SSD, 2 seagate 2 TB HDD, and 1 WD 1TB HD (the original one in the mac pro), along with 32 GB of RAM. So my only problems are the firmaware and the weird activity when the computer is put to sleep.
    Some help would be greatly appreciated!
    I'm running OS X Mavericks 10.9.2
    mid-2010 Mac Pro
    8 core processor (2 X 2.4gHz)

    According to this article, your EFI firmware is up to date:
    Computer
    Model identifier
    EFI Boot ROM version
    SMC version
    Mac Pro
    Mac Pro (Late 2013)
    MacPro6,1
    MP61.0116.B04 (EFI 2.0)
    2.20f18 (SMC 2.0)
    Mac Pro (Mid 2010)
    MacPro5,1
    MP51.007F.B03 (EFI 1.5)
    Mac Pro (Early 2009)
    MacPro4,1
    MP41.0081.B07 (EFI 1.4)
    Mac Pro (Early 2008)
    MacPro3,1
    MP31.006C.B05 (EFI 1.3)
    Mac Pro (8-core)
    MacPro2,1
    MP21.007F.B06 (EFI 1.2)
    1.15f3 (SMC 1.1)
    Mac Pro (Original)
    MacPro1,1
    MP11.005C.B08 (EFI 1.2)
    1.7f10 (SMC 1.1)
    EFI and SMC firmware updates for Intel-based Macs

  • I tried to update itunes and now my ipod won't work. What's wrong?

    I tried to update itunes and now my ipod is not recognized in itunes or on my computer. It will only show a picture of the usb cord going into itunes and it won't do anything else. How do I make it work and what happened?

    http://support.apple.com/kb/TS1538
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Maybe you are looking for