Updated now phone does not work

Updated yestrerday now 4S Iphone will not work. Unable to restore all the screen shows is a black background Itunes logo and the white plug pointing at the Itunes logo. Called everyone no one has helped me at all.

That means you'll need to plug your phone into your computer with iTunes since your phone is in recovery mode.   You will need to restore it from your last backup once the phone finishes updating.

Similar Messages

  • TS3694 error message when uploading new ios 6, now phone does not work..

    USB pic on screen and phone wont do anything, itunes wont connect. I have updated itunes and restarted computer and still nothing....please help!!

    This is my reply as a blind user we require infomation about changes to how the iPhone works with a new upgrade, so in IOS 6 to get the App Store to work istead of touch and then tap twice or move the screen to the next page we now have a differant way , all you do is touch the next thing on the line of Apps and it moves 4 places..

  • I was trying to update and sync my iphone 4, the process stopped, now the phone does not work and itunes appears not to "see" the phone? suggestions?

    I was trying to sync and update my phone with ITunes, about 5 minutes into the process everything stopped.  Now the phone does not work, it will not turn on or off, the screen of the phone shows the Apple Logo and a straight line.  ITunes seems to not "see" the phone.  Suggestions??

    http://support.apple.com/kb/HT3965

  • Prompted to update iTunes today and now it does not work.  tried reinstalling and caanot successfully reinstall.

    prompted to update iTunes today and now it does not work.  tried reinstalling and caanot successfully reinstall.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • HT3180 In the middle of the updating, iTV was unplugged. Now it does not work at all. Do you have experience, what to do now?

    In the middle of the updating, iTV was unplugged. Now it does not work at all. Do you have experience, what to do now?

    Ouch.  I am afriad the news is not good.  If there is no longer a working firmware instance on ATV there is nothing you can do.  That's why it has that message about not unplugging it during the update.
    Nothing happens when you plug it in?

  • I have updated ITunes and now it does not work

    I have updated ITunes and now it does not work. It worked before the update was installed, now it doesn't. I cannot un install it either...

    Use this application to uninstall iTunes and all related components
    http://support.microsoft.com/mats/program_install_and_uninstall/en-us

  • Just updated my iPad with iOS 7 and now internet does not work anymore, how to fix if???? Desperate

    Just updated my iPad with iOS 7 and now internet does not work anymore, how to fix if???? Desperate

    Try resetting your iPad:
    Double click the Home button. Slide up with one finger on ALL your apps to close them.
    Then, Press the Sleep/Wake button + Home button and hold 15 seconds or until you see the Apple logo.
    This will reset your device without erasing data, apps or settings.

  • After the OS 6 update my speaker does not work. My music plays but no sound comes out. Can someone help me with this issue? I currently have the 4S.

    After the OS 6 update my speaker does not work. Volume control on the side does not adjust the volume either. My music plays but no sound comes out. Can someone help me with this issue? I've tried rebooting my phone but still no sound comes out. I currently have the 4S.

    try to activate and desactivate the airplne switch a couple of time

  • In the context of restoring a drive from a backup, i copied /etc/sudoers from my backup. Now it does not work due to the permissions not being correct (even though it was copied via sudo cp -rp)

    In the context of restoring a drive from a backup, i copied /etc/sudoers from my backup. Now it does not work due to the permissions not being correct (even though it was copied via sudo cp -rp)

    Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
    Apple's iWork suite (Pages, Numbers, and Keynote.)
    Open Office (Office 2007-like suite compatible with OS X.)
    NeoOffice (similar to Open Office.)
    LibreOffice (a new direction for the Open Office suite.)

  • TS3367 Hi, the FaceTime just did not work between my mom and I. It used to work weeks ago, but now it does not work after showing"connecting". I feel frustrated and try all the method I can think of. Still do not work. Hope u can help me. Thanks!

    Hi, the FaceTime just did not work between my mom and I. It used to work weeks ago, but now it does not work after showing"connecting". I feel frustrated and try all the method I can think of. Still do not work. Hope u can help me. Thanks!

    Was it just this one time?  Could be that you, or your mom, were experiencing network problems.  Try again at a later time.

  • I have a WRT54G v8.1. I upgraded the firmware, and now it DOES NOT WORK.

    I have a WRT54G v8.1. I upgraded the firmware, and now it DOES NOT WORK.  It keeps telling me that this router is not supported.  There is no firmware to roll back to.  It worked fine until a power outage.  HELP!

    If your Internet Service Provider is Cable follow this link to configure the router.
    If your Internet Service Provider is DSL follow this link to configure the router.

  • I HAVE EARLIER PREPARED WINDOWS REPAIR DISC, NOW IT DOES NOT WORK

    140525
    I HAVE WINDOWS 7  ULTIMATE VERSION- 32 BIT
    I HAVE EARLIER PREPARED MANY  " WINDOWS REPAIR DISC" FROM TIME TO TIME AS A PROTECTION ON THIS VERY LAPTOP AND OS.
    NOW IT DOES NOT WORK AND GIVE ERROR CODE -- 0XC00AA0301.
    I TRIED SEVERAL TIMES AND WASTED QUITE A FEW DVD'S.
    CAN YOU GUIDE?
    REPLY ON [email protected]
    HOPE TO RECEIVE HELP.
    GJDMBH

    Once downloaded the Window7 setup you then want to download the windows free burning app from the same thread.
    Also visit the Microsoft website link below as has basic guidance that may help you.
    http://www.microsoftstore.com/store/msusa/html/pbP​age.Help_Win7_usbdvd_dwnTool
    Basically with the Windows free burning app you can make either a USB boot stick media of windows 7 or a good older fashioned DVD boot media. Just follow instructions & see how you go, if get stuck come back to this thread & post details on your issue - hopefully myself or other members will be able assist you further if needed.
    Like my post? Click Kudos (thumb+) to show appreciation.

  • After sending sound from find my iphone, now ipad does not work

    after sending sound from find my iphone, now ipad does not work
    it can't be unlock and scrren is blank, only siri works

    Try a reset: hold down the home button along with the sleep/wake button until you see the apple, then let go.

  • HT4972 i have gotan update on my itunes that should allow me update my iphone 4g from ios 4 to ios5 but whenever i try to update it it does not work what do i do

    i have gotan update on my itunes that should allow me update my iphone 4g from ios 4 to ios5 but whenever i try to update it it does not work what do i do

    Well... if you really want help, you could start by providing some details of what happens when you try to update.

  • Tried to run ios5 upgrade, get unkown error 0xE8000065 and now ipad does not work at all and is frozen can not even switch off

    tried to run ios5 upgrade, get unkown error 0xE8000065 and now ipad does not work at all and is frozen can not even switch off

    Try a hard reset and go from there. You might try a manual install (using DFU Mode), as outlined in the link below.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

Maybe you are looking for

  • Problem with Item Validation

    Hello, I am running an advanced tutorial: http://download.oracle.com/docs/cd/E14373_01/appdev.32/e13363/issue_track_ui.htm#BGBJCGIC and I have a problem with item Validation. Tutorial offers the following: You must manually create another validation

  • Problem is report painter form defination

    Hi Mentors, i wish to alter the length of the lead column and have to show a lot of columns in my layout form page (But system is giving error that length exceed.) How to cater this? Regds, Sharmi

  • Problem with Select in Production

    hi all, My Select query is working fine in Devlopment server, but it is going to Dump in Production. In ST05, it is showing time-out error, may be due to heavy data, i guess.  Is there any way to modify this query sothat it wont go to Dump in Product

  • Pixel accuracy - using ActionScript to snap to pixels?

    Is it possible to use ActionScript to snap to pixels, repositioning everything in ones Flash project to whole-number, or integer positions and sizes? Flash's "Snap to Pixels" doesn't really work, and despite making sure that everything I design (such

  • When opening a new blank tab I'd like it to open a specific page rather than have nothing. Can this be done?

    When hitting cmd/ctrl + t (or pressing the open new tab button) I'd like Firefox to open a page that I specify rather than being 'blank'. Can this be done (with / without a plug in)?