Updated nvidia module problems

I just did a 'pacman -Syu' which included an update to the nvidia module. Now my screen is whacked. I took a couple pics with my camera:
This is the KDM login screen. People with nvidia cards will know that when the X server first starts up, you initially get a white screen with the nvidia log on it, and then your login manager starts up. As you can see in the pic, you can still "see" that nvidia logo.
And here is the desktop!
Completely hosed. I switched back to the nv driver and I'm working fine.
Any thoughts?
Mark

tony wrote:After 4 hours of installing everything and having brand new Arch in my comp I have installed nvidia driver from their page and my system is down :cry: . Then I've tried pacman and its practically same :evil: Now I'm not able to boot in kdm. The article said something about version number 3 but I wasn't able to find it anywhere. Do I have to reinstall everything or is there some remedy
Some are having nvidia driver problems. I have not tried this yet, but
I will later today.
Here is the thread:
http://bbs.archlinux.org/viewtopic.php?t=7945&start=15
hyp0luxa wrote:
this driver disables GLX when the composite extension is enabled. to fix add
Code:
Option "AllowGLXWithComposite" "1"
in your card device section of /etc/X11/xorg.conf
I don't know if this will work, but it's worth a shot

Similar Messages

Y510p and problem with Update Nvidia Driver

Hi everyonei have problem with updating my y510p lenovo laptop nvidia driver ,my current nvidia driver version is 327.62 which i download from lenovo website,Now for better performance in new games like gta v and witcher3 ,i decide to updating nvidia driver,first remove my nvidia graphic driver from add or remove then download nvidia ver 350 from nvidia official web site , which nvidia website confirm it support my graphic card which is Gt755m , then i install new ver and during install i check clean install , after successful install , restart laptop , then there was problem . when i try to open nvidia control panel it wont running and an error showed up and said "You are not currently using a display attached to an NVIDIA GPU" .i try to open a game , game running in really low fps and i find out game run on hd graphic of my laptop and my nvidia graphic wont run .The only way to repair was i install my last nvidia driver 327.62 and run a system restore .guys what is your suggestion and how i can update my y510p nvidia driver ?Thanks

Hi Y510Man,
     The video graphics installation order is important. You need to install the Intel Graphics first, and then do the Nvidia. IIRC you should un-install the Nvidia driver, then re-install (or upgrade) the Intel HD Graphics driver. Reboot, and install the new Nvidia driver.
     I don't know why, but every time I upgraded my Y470 Nvidia driver, I had to use this procedure. First install, or re-install, the Intel driver, then install the Nvidia. You can't just upgrade the Nvidia driver without a re-install of the Intel. I think it has to do with the Optimus setting, and the automatic switching.
    Let us know how it goes.
Cheers
DragonRider

Can't load nvidia module after kernel and nvidia update

After latest kernel (3.6.36.2) and nvidia (260.19.29) upgrade xorg doesn't work. I investigated a little, and that's what I found:
# modprobe nvidia
FATAL: Error inserting nvidia (/lib/modules/2.6.36-ARCH/kernel/drivers/video/nvidia.ko): No such device
I blacklisted nouveau module:
# cat /etc/rc.conf | grep nouveau
MODULES=(b43 vboxdrv !nouveau)
but it didn't help.
Video card:
# lspci | grep VGA
01:00.0 VGA compatible controller: nVidia Corporation G84 [GeForce 8600M GT] (rev a1)

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.36-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 20101125 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Dec 10 20:01:53 UTC 2010
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000005fed0000 (usable)
BIOS-e820: 000000005fed0000 - 000000005fee3000 (ACPI NVS)
BIOS-e820: 000000005fee3000 - 0000000060000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
DMI present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x5fed0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FC0000000 write-back
1 base 040000000 mask FE0000000 write-back
2 base 05FF00000 mask FFFF00000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000001000 (reserved)
modified: 0000000000001000 - 0000000000002000 (usable)
modified: 0000000000002000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009f800 (usable)
modified: 000000000009f800 - 00000000000a0000 (reserved)
modified: 00000000000dc000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000005fed0000 (usable)
modified: 000000005fed0000 - 000000005fee3000 (ACPI NVS)
modified: 000000005fee3000 - 0000000060000000 (reserved)
modified: 00000000fec00000 - 00000000fec10000 (reserved)
modified: 00000000fed00000 - 00000000fed00400 (reserved)
modified: 00000000fed14000 - 00000000fed1a000 (reserved)
modified: 00000000fed1c000 - 00000000fed90000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000ff000000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 01800000
found SMP MP-table at [c00f7bc0] f7bc0
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 15000-1a000
RAMDISK: 37e47000 - 37ff0000
Allocated new RAMDISK: 00100000 - 002a8feb
Move RAMDISK from 0000000037e47000 - 0000000037feffea to 00100000 - 002a8fea
ACPI: RSDP 000f7b40 00024 (v02 Compal)
ACPI: XSDT 5fed8834 0008C (v01 Compal CRESTLNE 06040000 LTP 00000000)
ACPI: FACP 5fedfbd2 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
ACPI: DSDT 5fed9b9f 05FBF (v02 Compal CRESTLNE 06040000 INTL 20061109)
ACPI: FACS 5fee2fc0 00040
ACPI: APIC 5fedfcc6 00068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
ACPI: HPET 5fedfd2e 00038 (v01 Compal CRESTLNE 06040000 LOHR 0000005A)
ACPI: MCFG 5fedfd66 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
ACPI: TCPA 5fedfda2 00032 (v01 Intel CRESTLNE 06040000 LOHR 0000005A)
ACPI: TMOR 5fedfdd4 00026 (v01 PTLTD 06040000 PTL 00000003)
ACPI: SLIC 5fedfdfa 00176 (v01 Compal CRESTLNE 06040000 TBD 00000001)
ACPI: APIC 5fedff70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: BOOT 5fedffd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SSDT 5fed98da 002C5 (v01 SataRe SataAhci 00001000 INTL 20050624)
ACPI: SSDT 5fed8e4c 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
ACPI: SSDT 5fed8da6 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
ACPI: SSDT 5fed88c0 004E6 (v01 PmRef CpuPm 00003000 INTL 20050624)
ACPI: BIOS bug: multiple APIC/MADT found, using 0
ACPI: If "acpi_apic_instance=2" works better, notify [email protected]
ACPI: Local APIC address 0xfee00000
646MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0005fed0
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000001 -> 0x00000002
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0005fed0
On node 0 totalpages: 392800
free_area_init_node: node 0, pgdat c142d600, node_mem_map c1598020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3952 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 1294 pages used for memmap
HighMem zone: 164292 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [16000 - 167ff]
PM: Registered nosave memory: 0000000000002000 - 0000000000010000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Allocating PCI resources starting at 60000000 (gap: 60000000:9ec00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 13 pages/cpu @c2400000 s31488 r0 d21760 u2097152
pcpu-alloc: s31488 r0 d21760 u2097152 alloc=1*4194304
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 389730
Kernel command line: BOOT_IMAGE=/boot/vmlinuz26 root=/dev/sda2 ro
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 7858220 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Subtract (52 early reservations)
#1 [0000001000 - 0000002000] EX TRAMPOLINE
#2 [0001000000 - 000158fe8c] TEXT DATA BSS
#3 [0001590000 - 0001596198] BRK
#4 [00000f7bd0 - 0000100000] BIOS reserved
#5 [00000f7bc0 - 00000f7bd0] MP-table mpf
#6 [000009f800 - 000009fd71] BIOS reserved
#7 [000009ff35 - 00000f7bc0] BIOS reserved
#8 [000009fd71 - 000009ff35] MP-table mpc
#9 [0000010000 - 0000011000] TRAMPOLINE
#10 [0000011000 - 0000015000] ACPI WAKEUP
#11 [0000015000 - 0000016000] PGTABLE
#12 [0000100000 - 00002a9000] NEW RAMDISK
#13 [0001597000 - 0001598000] BOOTMEM
#14 [0001598000 - 0002198000] BOOTMEM
#15 [000158fec0 - 000158fec4] BOOTMEM
#16 [000158ff00 - 000158ffc0] BOOTMEM
#17 [00015961c0 - 0001596214] BOOTMEM
#18 [0002198000 - 000219b000] BOOTMEM
#19 [000158ffc0 - 0001590000] BOOTMEM
#20 [000219b000 - 000219e000] BOOTMEM
#21 [0001596240 - 0001596265] BOOTMEM
#22 [0001596280 - 00015962a7] BOOTMEM
#23 [00015962c0 - 0001596464] BOOTMEM
#24 [0001596480 - 00015964c0] BOOTMEM
#25 [00015964c0 - 0001596500] BOOTMEM
#26 [0001596500 - 0001596540] BOOTMEM
#27 [0001596540 - 0001596580] BOOTMEM
#28 [0001596580 - 00015965c0] BOOTMEM
#29 [00015965c0 - 0001596600] BOOTMEM
#30 [0001596600 - 0001596640] BOOTMEM
#31 [0001596640 - 0001596680] BOOTMEM
#32 [0001596680 - 00015966c0] BOOTMEM
#33 [00015966c0 - 0001596700] BOOTMEM
#34 [0001596700 - 0001596740] BOOTMEM
#35 [0001596740 - 0001596780] BOOTMEM
#36 [0001596780 - 0001596790] BOOTMEM
#37 [00015967c0 - 00015967d0] BOOTMEM
#38 [0001596800 - 000159682d] BOOTMEM
#39 [0001596840 - 000159686d] BOOTMEM
#40 [0002400000 - 000240d000] BOOTMEM
#41 [0002600000 - 000260d000] BOOTMEM
#42 [0001596880 - 0001596884] BOOTMEM
#43 [00015968c0 - 00015968c4] BOOTMEM
#44 [0001596900 - 0001596908] BOOTMEM
#45 [0001596940 - 0001596948] BOOTMEM
#46 [0001596980 - 0001596a28] BOOTMEM
#47 [0001596a40 - 0001596aa8] BOOTMEM
#48 [000219e000 - 00021a2000] BOOTMEM
#49 [00021a2000 - 0002222000] BOOTMEM
#50 [0002222000 - 0002262000] BOOTMEM
#51 [000260d000 - 0002d8b82c] BOOTMEM
Initializing HighMem for node 0 (000377fe:0005fed0)
Memory: 1542868k/1571648k available (3104k kernel code, 28332k reserved, 1205k data, 428k init, 662344k highmem)
virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1436000 - 0xc14a1000 ( 428 kB)
.data : 0xc1308056 - 0xc1435820 (1205 kB)
.text : 0xc1000000 - 0xc1308056 (3104 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:512
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1795.546 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3592.72 BogoMIPS (lpj=5985153)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
AppArmor: AppArmor disabled by boot time parameter
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
ACPI: Core revision 20100702
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 Ok.
Initializing CPU#1
CPU1: Thermal monitoring handled by SMI
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (7184.34 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: PCI BIOS revision 2.10 entry at 0xfdde1, last bus=14
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 5fed95da 00238 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00238 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT 5fed90ab 004AA (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 004AA (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: SSDT 5fed9812 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
ACPI: SSDT 5fed9555 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x60000000-0xdfffffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io 0x1800-0x181f]
pci 0000:00:1a.1: reg 20: [io 0x1820-0x183f]
pci 0000:00:1a.7: reg 10: [mem 0xf8404800-0xf8404bff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xf8400000-0xf8403fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0x1840-0x185f]
pci 0000:00:1d.1: reg 20: [io 0x1860-0x187f]
pci 0000:00:1d.2: reg 20: [io 0x1880-0x189f]
pci 0000:00:1d.7: reg 10: [mem 0xf8404c00-0xf8404fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 1640 (mask 007f)
pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 20: [io 0x18a0-0x18af]
pci 0000:00:1f.2: reg 10: [io 0x18d8-0x18df]
pci 0000:00:1f.2: reg 14: [io 0x18cc-0x18cf]
pci 0000:00:1f.2: reg 18: [io 0x18d0-0x18d7]
pci 0000:00:1f.2: reg 1c: [io 0x18c8-0x18cb]
pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff]
pci 0000:00:1f.2: reg 24: [mem 0xf8404000-0xf84047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f]
pci 0000:01:00.0: reg 10: [mem 0xc6000000-0xc6ffffff]
pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xc4000000-0xc5ffffff 64bit]
pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xc4000000-0xc6ffffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xbc000000-0xbfffffff]
pci 0000:00:1c.0: bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
pci 0000:04:00.0: reg 10: [mem 0xf0000000-0xf000ffff 64bit]
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 04-04]
pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf3ffffff]
pci 0000:00:1c.1: bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 06-06]
pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:00:1c.2: bridge window [mem 0xfc000000-0xfdffffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 08-08]
pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.3: bridge window [mem 0xb4000000-0xb7ffffff]
pci 0000:00:1c.3: bridge window [mem 0xc8000000-0xc9ffffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 0a-0a]
pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:0c:00.0: reg 10: [mem 0xf8000000-0xf8003fff]
pci 0000:0c:00.0: supports D1 D2
pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.5: PCI bridge to [bus 0c-0c]
pci 0000:00:1c.5: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.5: bridge window [mem 0xf8000000-0xf80fffff]
pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:0e:06.0: proprietary Ricoh MMC controller disabled (via firewire function)
pci 0000:0e:06.0: MMC cards are now supported by standard SDHCI controller
pci 0000:0e:06.0: reg 10: [mem 0xf8100000-0xf81007ff]
pci 0000:0e:06.0: supports D1 D2
pci 0000:0e:06.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0e:06.0: PME# disabled
pci 0000:0e:06.1: reg 10: [mem 0xf8100800-0xf81008ff]
pci 0000:0e:06.1: supports D1 D2
pci 0000:0e:06.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0e:06.1: PME# disabled
pci 0000:0e:06.2: reg 10: [mem 0xf8101000-0xf81010ff]
pci 0000:0e:06.2: supports D1 D2
pci 0000:0e:06.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0e:06.2: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 0e-0e] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xf81fffff]
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
HEST: Table is not found!
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 0000000000002000 - 000000000000ffff
reserve RAM buffer: 000000000009f800 - 000000000009ffff
reserve RAM buffer: 000000005fed0000 - 000000005fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:06: [io 0x0680-0x069f] has been reserved
system 00:06: [io 0x0800-0x080f] has been reserved
system 00:06: [io 0x1000-0x107f] has been reserved
system 00:06: [io 0x1180-0x11bf] has been reserved
system 00:06: [io 0x1640-0x164f] has been reserved
system 00:06: [io 0xfe00] has been reserved
system 00:06: [io 0xff00-0xff7f] has been reserved
pci 0000:00:1c.4: BAR 14: assigned [mem 0x60000000-0x601fffff]
pci 0000:00:1c.4: BAR 15: assigned [mem 0x60200000-0x603fffff 64bit pref]
pci 0000:00:1c.5: BAR 15: assigned [mem 0x60400000-0x605fffff 64bit pref]
pci 0000:00:1c.4: BAR 13: assigned [io 0x7000-0x7fff]
pci 0000:00:1c.5: BAR 13: assigned [io 0x8000-0x8fff]
pci 0000:00:1f.3: BAR 0: assigned [mem 0x60600000-0x606000ff]
pci 0000:00:1f.3: BAR 0: set to [mem 0x60600000-0x606000ff] (PCI address [0x60600000-0x606000ff]
pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xc4000000-0xc6ffffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xbc000000-0xbfffffff]
pci 0000:00:1c.0: bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 04-04]
pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf3ffffff]
pci 0000:00:1c.1: bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 06-06]
pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:00:1c.2: bridge window [mem 0xfc000000-0xfdffffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 08-08]
pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.3: bridge window [mem 0xb4000000-0xb7ffffff]
pci 0000:00:1c.3: bridge window [mem 0xc8000000-0xc9ffffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 0a-0a]
pci 0000:00:1c.4: bridge window [io 0x7000-0x7fff]
pci 0000:00:1c.4: bridge window [mem 0x60000000-0x601fffff]
pci 0000:00:1c.4: bridge window [mem 0x60200000-0x603fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 0c-0c]
pci 0000:00:1c.5: bridge window [io 0x8000-0x8fff]
pci 0000:00:1c.5: bridge window [mem 0xf8000000-0xf80fffff]
pci 0000:00:1c.5: bridge window [mem 0x60400000-0x605fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0e-0e]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xf81fffff]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xc4000000-0xc6ffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xbc000000-0xbfffffff]
pci_bus 0000:02: resource 2 [mem 0xcc000000-0xcdffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf3ffffff]
pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfbffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:06: resource 1 [mem 0xf4000000-0xf7ffffff]
pci_bus 0000:06: resource 2 [mem 0xfc000000-0xfdffffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:08: resource 1 [mem 0xb4000000-0xb7ffffff]
pci_bus 0000:08: resource 2 [mem 0xc8000000-0xc9ffffff 64bit pref]
pci_bus 0000:0a: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:0a: resource 1 [mem 0x60000000-0x601fffff]
pci_bus 0000:0a: resource 2 [mem 0x60200000-0x603fffff 64bit pref]
pci_bus 0000:0c: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:0c: resource 1 [mem 0xf8000000-0xf80fffff]
pci_bus 0000:0c: resource 2 [mem 0x60400000-0x605fffff 64bit pref]
pci_bus 0000:0e: resource 1 [mem 0xf8100000-0xf81fffff]
pci_bus 0000:0e: resource 4 [io 0x0000-0xffff]
pci_bus 0000:0e: resource 5 [mem 0x00000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1700k freed
Simple Boot Flag at 0x38 set to 0x1
apm: BIOS not found.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1294159792.419:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1723
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
intel_idle: MWAIT substates: 0x22220
intel_idle: does not run on family 6 model 15
ERST: Table is not found!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
rtc_cmos 00:07: setting system clock to 2011-01-04 16:49:53 UTC (1294159793)
Initalizing network drop monitor service
Freeing unused kernel memory: 428k freed
udev[38]: starting version 165
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404100 irq 40
ata2: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404180 irq 40
ata3: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404200 irq 40
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
ata4.00: ATAPI: Slimtype DVDRW SSM-8515S, GS09, max UDMA/33
ata4.00: configured for UDMA/33
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata1.00: unexpected _GTF length (8)
ata1.00: ATA-8: ST9320423AS, 0002SDM1, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: unexpected _GTF length (8)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST9320423AS 0002 PQ: 0 ANSI: 5
scsi 3:0:0:0: CD-ROM Slimtype DVDRW SSM-8515S GS09 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
udev[839]: starting version 165
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
input: PC Speaker as /devices/platform/pcspkr/input/input4
Switching to clocksource hpet
compal-laptop: Identified laptop model 'FL90/IFL90'
cfg80211: Calling CRDA to update world regulatory domain
compal-laptop: Driver 0.2.7 successfully loaded
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
Linux agpgart interface v0.103
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
iTCO_vendor_support: vendor-support=0
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sdhci-pci 0000:0e:06.1: SDHCI controller found [1180:0822] (rev 22)
sdhci-pci 0000:0e:06.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
sdhci-pci 0000:0e:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:0e:06.1] using DMA
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
ACPI: Battery Slot [BAT1] (battery present)
ACPI: WMI: Mapper loaded
ACPI: AC Adapter [ACAD] (on-line)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
acpi device:03: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
b43-pci-bridge 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
b43-pci-bridge 0000:0c:00.0: setting latency timer to 64
ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243)
ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243)
ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243)
ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243)
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8404800
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8404c00
ssb: Sonics Silicon Backplane found on PCI device 0000:0c:00.0
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
firewire_ohci 0000:0e:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
psmouse serio1: ID: 10 00 64
firewire_ohci: Added fw-ohci device 0000:0e:06.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
tg3.c:v3.113 (August 2, 2010)
tg3 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
tg3 0000:04:00.0: setting latency timer to 64
tg3 0000:04:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
usb 1-2: new high speed USB device using ehci_hcd and address 2
tg3 0000:04:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
elantech: assuming hardware version 1, firmware version 2.0.4
tg3 0000:04:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
tg3 0000:04:00.0: eth0: Tigon3 [partno(none) rev b002] (PCI Express) MAC address 00:1b:38:55:15:a4
tg3 0000:04:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1])
tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:04:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
elantech: Synaptics capabilities query result 0x10, 0x02, 0x64.
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
HDA Intel 0000:00:1b.0: irq 41 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
firewire_core: created device fw0: GUID 00023f79b240229a, S400
b43-phy0: Broadcom 4311 WLAN found (core revision 10)
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
phy0: Selected rate control algorithm 'minstrel_ht'
Registered led device: b43-phy0::tx
Registered led device: b43-phy0::rx
Registered led device: b43-phy0::radio
Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ]
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b018)
input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input8
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
nvidia 0000:01:00.0: power state changed by ACPI to D0
nvidia 0000:01:00.0: power state changed by ACPI to D0
nvidia 0000:01:00.0: enabling device (0000 -> 0003)
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:0407) installed
NVRM: in this system is not supported by the 260.19.29 NVIDIA Linux
NVRM: graphics driver release. Please see 'Appendix A -
NVRM: Supported NVIDIA GPU Products' in this release's README,
NVRM: available on the Linux graphics driver download page at
NVRM: www.nvidia.com.
nvidia: probe of 0000:01:00.0 failed with error -1
NVRM: The NVIDIA probe routine failed for 1 device(s).
NVRM: None of the NVIDIA graphics adapters were initialized!
EXT4-fs (sda2): re-mounted. Opts: (null)
EXT4-fs (sda2): re-mounted. Opts: (null)
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
fuse init (API version 7.15)
Adding 3156768k swap on /dev/sda3. Priority:-1 extents:1 across:3156768k
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=none,decodes=none:owns=io+mem
NVRM: The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:0407) installed
NVRM: in this system is not supported by the 260.19.29 NVIDIA Linux
NVRM: graphics driver release. Please see 'Appendix A -
NVRM: Supported NVIDIA GPU Products' in this release's README,
NVRM: available on the Linux graphics driver download page at
NVRM: www.nvidia.com.
nvidia: probe of 0000:01:00.0 failed with error -1
NVRM: The NVIDIA probe routine failed for 1 device(s).
NVRM: None of the NVIDIA graphics adapters were initialized!
last lines looks interesting, but I also checked mentioned Appendix A of README, and I found 8600M GT (PCI ID 0x0407) between supported chips.

[SOLVED]Problem updating nvidia-beta

If I update nvidia-utils-beta it tells me I need nvidia-beta
If I try updating nvidia-beta it gives me the following error:
error: target not found: nvidia-utils-beta=275.09.07
==> ERROR: 'pacman' failed to install missing dependencies.
==> ERROR: Makepkg was unable to build nvidia-beta.
Last edited by sbfreak (2011-06-15 10:48:43)

That would take me to the stable branch would it not ? I just want to keep using nvidia-beta to have the latest driver,beta or not.

Xorg cannot find screens with nvidia module

I know that this question is very common, but I cannot find solution,
I should use "nvidia" drivers on Lenovo notebook with two videocards (work with Cuda technology).
Xorg cannot load nvidia module with this xorg.conf. Can anybody help?
Thanks.
lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 630M] (rev a1)
xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
# Screen 0 "Screen1" 0 0
# Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # 
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # 
#Option "FPScale" # [<bool>]
#Option "FPTweak" # 
#Option "DualHead" # [<bool>]
Identifier "Card0"
Driver "nvidia"
BusID "PCI:1:0:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # <str>
#Option "Backlight" # <str>
#Option "DRI" # [<bool>]
#Option "ColorKey" # 
#Option "VideoKey" # 
#Option "Tiling" # [<bool>]
#Option "LinearFramebuffer" # [<bool>]
#Option "SwapbuffersWait" # [<bool>]
#Option "XvPreferOverlay" # [<bool>]
#Option "HotPlug" # [<bool>]
#Option "RelaxedFencing" # [<bool>]
#Option "XvMC" # [<bool>]
#Option "Throttle" # [<bool>]
#Option "ZaphodHeads" # <str>
#Option "DelayedFlush" # [<bool>]
#Option "TearFree" # [<bool>]
#Option "PerCrtcPixmaps" # [<bool>]
#Option "FallbackDebug" # [<bool>]
#Option "DebugFlushBatches" # [<bool>]
#Option "DebugFlushCaches" # [<bool>]
#Option "DebugWait" # [<bool>]
#Option "BufferCache" # [<bool>]
#Option "TripleBuffer" # [<bool>]
Identifier "Card1"
Driver "intel"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1366x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1366x768"
EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 32
# Modes "1366x768"
# EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1366x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1366x768"
EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 32
# Modes "1366x768"
# EndSubSection
EndSection
Xorg.0.log:
[ 27.732]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 27.732] X Protocol Version 11, Revision 0
[ 27.732] Build Operating System: Linux 3.6.2-1-ARCH x86_64
[ 27.732] Current Operating System: Linux kot_dymok 3.5.6-1-ARCH #1 SMP PREEMPT Sun Oct 7 19:30:49 CEST 2012 x86_64
[ 27.732] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=fc9d19b7-8701-471d-bf1f-867196c6d392 resume=/dev/disk/by-uuid/007e49dc-18dc-442a-89c8-ab927e6a17ff ro quiet
[ 27.732] Build Date: 19 October 2012 03:54:56PM
[ 27.732]
[ 27.732] Current version of pixman: 0.26.2
[ 27.732] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 27.732] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 27.732] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 26 01:54:00 2012
[ 27.732] (==) Using config file: "/etc/X11/xorg.conf"
[ 27.732] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 27.732] (==) ServerLayout "X.org Configured"
[ 27.732] (**) |-->Screen "Screen0" (0)
[ 27.732] (**) | |-->Monitor "Monitor0"
[ 27.732] (**) | |-->Device "Card0"
[ 27.732] (**) |-->Input Device "Mouse0"
[ 27.733] (**) |-->Input Device "Keyboard0"
[ 27.733] (==) Automatically adding devices
[ 27.733] (==) Automatically enabling devices
[ 27.733] (==) Automatically adding GPU devices
[ 27.733] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 27.733] Entry deleted from font path.
[ 27.733] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 27.733] Entry deleted from font path.
[ 27.733] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 27.733] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 27.733] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 27.733] (WW) Disabling Mouse0
[ 27.733] (WW) Disabling Keyboard0
[ 27.733] (II) Loader magic: 0x7fcc20
[ 27.733] (II) Module ABI versions:
[ 27.733] X.Org ANSI C Emulation: 0.4
[ 27.733] X.Org Video Driver: 13.0
[ 27.733] X.Org XInput driver : 18.0
[ 27.733] X.Org Server Extension : 7.0
[ 27.733] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 27.734] (--) PCI:*(0:0:2:0) 8086:0166:17aa:3901 rev 9, Mem @ 0xd3400000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64
[ 27.734] (--) PCI: (0:1:0:0) 10de:0de9:17aa:3901 rev 161, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[ 27.734] (II) Open ACPI successful (/var/run/acpid.socket)
[ 27.734] Initializing built-in extension Generic Event Extension
[ 27.734] Initializing built-in extension SHAPE
[ 27.734] Initializing built-in extension MIT-SHM
[ 27.734] Initializing built-in extension XInputExtension
[ 27.734] Initializing built-in extension XTEST
[ 27.734] Initializing built-in extension BIG-REQUESTS
[ 27.734] Initializing built-in extension SYNC
[ 27.734] Initializing built-in extension XKEYBOARD
[ 27.734] Initializing built-in extension XC-MISC
[ 27.734] Initializing built-in extension SECURITY
[ 27.734] Initializing built-in extension XINERAMA
[ 27.734] Initializing built-in extension XFIXES
[ 27.734] Initializing built-in extension RENDER
[ 27.734] Initializing built-in extension RANDR
[ 27.734] Initializing built-in extension COMPOSITE
[ 27.734] Initializing built-in extension DAMAGE
[ 27.734] Initializing built-in extension MIT-SCREEN-SAVER
[ 27.734] Initializing built-in extension DOUBLE-BUFFER
[ 27.734] Initializing built-in extension RECORD
[ 27.734] Initializing built-in extension DPMS
[ 27.735] Initializing built-in extension X-Resource
[ 27.735] Initializing built-in extension XVideo
[ 27.735] Initializing built-in extension XVideo-MotionCompensation
[ 27.735] Initializing built-in extension XFree86-VidModeExtension
[ 27.735] Initializing built-in extension XFree86-DGA
[ 27.735] Initializing built-in extension XFree86-DRI
[ 27.735] Initializing built-in extension DRI2
[ 27.735] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 27.735] (II) LoadModule: "glx"
[ 27.735] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 27.741] (II) Module glx: vendor="NVIDIA Corporation"
[ 27.741] compiled for 4.0.2, module version = 1.0.0
[ 27.741] Module class: X.Org Server Extension
[ 27.741] (II) NVIDIA GLX Module 304.43 Sun Aug 19 20:34:01 PDT 2012
[ 27.741] Loading extension GLX
[ 27.741] (II) LoadModule: "nvidia"
[ 27.741] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 27.742] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 27.742] compiled for 4.0.2, module version = 1.0.0
[ 27.742] Module class: X.Org Video Driver
[ 27.815] (EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
[ 27.815] (EE) NVIDIA: system's kernel log for additional error messages.
[ 27.815] (II) UnloadModule: "nvidia"
[ 27.815] (II) Unloading nvidia
[ 27.815] (EE) Failed to load module "nvidia" (module-specific error, 0)
[ 27.815] (EE) No drivers available.
[ 27.815]
Fatal server error:
[ 27.815] no screens found
[ 27.815] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 27.815] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 27.815] (EE)
dmesg.log
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 20120721 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Oct 7 19:30:49 CEST 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=fc9d19b7-8701-471d-bf1f-867196c6d392 resume=/dev/disk/by-uuid/007e49dc-18dc-442a-89c8-ab927e6a17ff ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000baabefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000baabf000-0x00000000baebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000baebf000-0x00000000bafbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bafbf000-0x00000000baffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: LENOVO Lenovo G580/Product Name, BIOS 5ECN33WW(V2.03) 06/06/2012
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x13f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BB000000 mask FFF000000 uncachable
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 5 base 100000000 mask FC0000000 write-back
[ 0.000000] 6 base 13F600000 mask FFFE00000 uncachable
[ 0.000000] 7 base 13F800000 mask FFF800000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xbaffffff]
[ 0.000000] [mem 0x00000000-0xbaffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0xbaffffff @ [mem 0x1fa24000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13f5fffff]
[ 0.000000] [mem 0x100000000-0x13f5fffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x13f5fffff @ [mem 0xbaab9000-0xbaabefff]
[ 0.000000] RAMDISK: [mem 0x37a12000-0x37d00fff]
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000baffe210 00094 (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 00000000baffb000 000F4 (v04 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 00000000bafee000 09755 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS 00000000bafbb000 00040
[ 0.000000] ACPI: UEFI 00000000baffd000 00236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 00000000baffc000 000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 00000000baffa000 00038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 00000000baff9000 0008C (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 00000000baff8000 0003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SLIC 00000000bafed000 00176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000bafec000 006FE (v01 LENOVO CB-01 00001000 ACPI 00040000)
[ 0.000000] ACPI: BOOT 00000000bafea000 00028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASPT 00000000bafe5000 00034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 00000000bafe3000 00044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000bafe2000 00968 (v01 LENOVO CB-01 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000bafe1000 00A92 (v01 LENOVO CB-01 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000bafdf000 01EDD (v01 LENOVO CB-01 00001000 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13f5fffff]
[ 0.000000] NODE_DATA [mem 0x13f5fc000-0x13f5fffff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013ac00000-ffff88013ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0xbaabefff]
[ 0.000000] node 0: [mem 0xbafff000-0xbaffffff]
[ 0.000000] node 0: [mem 0x100000000-0x13f5fffff]
[ 0.000000] On node 0 totalpages: 1023564
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3911 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 743679 pages, LIFO batch:31
[ 0.000000] Normal zone: 4056 pages used for memmap
[ 0.000000] Normal zone: 255528 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
[ 0.000000] PM: Registered nosave memory: 00000000baabf000 - 00000000baebf000
[ 0.000000] PM: Registered nosave memory: 00000000baebf000 - 00000000bafbf000
[ 0.000000] PM: Registered nosave memory: 00000000bafbf000 - 00000000bafff000
[ 0.000000] PM: Registered nosave memory: 00000000bb000000 - 00000000bfa00000
[ 0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb80000
[ 0.000000] PM: Registered nosave memory: 00000000ffb80000 - 0000000100000000
[ 0.000000] e820: [mem 0xbfa00000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013f200000 s83392 r8192 d23104 u262144
[ 0.000000] pcpu-alloc: s83392 r8192 d23104 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1003118
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=fc9d19b7-8701-471d-bf1f-867196c6d392 resume=/dev/disk/by-uuid/007e49dc-18dc-442a-89c8-ab927e6a17ff ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3947540k/5232640k available (4661k kernel code, 1138384k absent, 146716k reserved, 4191k data, 760k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.003333] Detected 2494.278 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.41 BogoMIPS (lpj=8314260)
[ 0.000004] pid_max: default: 32768 minimum: 301
[ 0.000025] Security Framework initialized
[ 0.000028] AppArmor: AppArmor disabled by boot time parameter
[ 0.000250] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001230] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001662] Mount-cache hash table entries: 256
[ 0.001817] Initializing cgroup subsys cpuacct
[ 0.001818] Initializing cgroup subsys memory
[ 0.001825] Initializing cgroup subsys devices
[ 0.001826] Initializing cgroup subsys freezer
[ 0.001827] Initializing cgroup subsys net_cls
[ 0.001828] Initializing cgroup subsys blkio
[ 0.001850] CPU: Physical Processor ID: 0
[ 0.001850] CPU: Processor Core ID: 0
[ 0.001854] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.002211] mce: CPU supports 7 MCE banks
[ 0.002221] CPU0: Thermal monitoring enabled (TM1)
[ 0.002227] using mwait in idle threads.
[ 0.003141] ACPI: Core revision 20120320
[ 0.021624] ftrace: allocating 18032 entries in 71 pages
[ 0.029975] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062936] CPU0: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz stepping 09
[ 0.166795] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.166800] ... version: 3
[ 0.166801] ... bit width: 48
[ 0.166802] ... generic registers: 4
[ 0.166803] ... value mask: 0000ffffffffffff
[ 0.166804] ... max period: 000000007fffffff
[ 0.166804] ... fixed-purpose events: 3
[ 0.166805] ... event mask: 000000070000000f
[ 0.186863] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.200098] Booting Node 0, Processors #1 #2 #3
[ 0.266902] Brought up 4 CPUs
[ 0.266905] Total of 4 processors activated (19962.65 BogoMIPS).
[ 0.269981] devtmpfs: initialized
[ 0.270796] PM: Registering ACPI NVS region [mem 0xbaebf000-0xbafbefff] (1048576 bytes)
[ 0.271536] NET: Registered protocol family 16
[ 0.271635] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.271637] ACPI: bus type pci registered
[ 0.271695] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.271697] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.277539] PCI: Using configuration type 1 for base access
[ 0.277665] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.277666] mtrr: probably your BIOS does not setup all CPUs.
[ 0.277666] mtrr: corrected configuration.
[ 0.277952] bio: create slab <bio-0> at 0
[ 0.277994] ACPI: Added _OSI(Module Device)
[ 0.277995] ACPI: Added _OSI(Processor Device)
[ 0.277996] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.277997] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.279372] ACPI: EC: Look up EC in DSDT
[ 0.280773] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.283353] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.284330] ACPI: SSDT 00000000bae18018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.284681] ACPI: Dynamic OEM Table Load:
[ 0.284683] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.284902] ACPI: SSDT 00000000bae19a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.285275] ACPI: Dynamic OEM Table Load:
[ 0.285277] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.285380] ACPI: SSDT 00000000bae17d98 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.285725] ACPI: Dynamic OEM Table Load:
[ 0.285726] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.286579] ACPI: Interpreter enabled
[ 0.286581] ACPI: (supports S0 S3 S4 S5)
[ 0.286600] ACPI: Using IOAPIC for interrupt routing
[ 0.409275] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.409424] ACPI: No dock devices found.
[ 0.409427] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.409682] \_SB_.PCI0:_OSC invalid UUID
[ 0.409683] _OSC request data:1 8 1f
[ 0.409687] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.410085] pci_root PNP0A08:00: >host bridge window [io 0x0000-0x0cf7]
[ 0.410087] pci_root PNP0A08:00: >host bridge window [io 0x0d00-0xffff]
[ 0.410089] pci_root PNP0A08:00: >host bridge window [mem 0x000a0000-0x000bffff]
[ 0.410091] pci_root PNP0A08:00: >host bridge window [mem 0xbfa00000-0xfeafffff]
[ 0.410117] PCI host bridge to bus 0000:00
[ 0.410119] pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7]
[ 0.410121] pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff]
[ 0.410122] pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
[ 0.410123] pci_bus 0000:00: >root bus resource [mem 0xbfa00000-0xfeafffff]
[ 0.410131] pci 0000:00:00.0: >[8086:0154] type 00 class 0x060000
[ 0.410164] pci 0000:00:01.0: >[8086:0151] type 01 class 0x060400
[ 0.410192] pci 0000:00:01.0: >PME# supported from D0 D3hot D3cold
[ 0.410210] pci 0000:00:02.0: >[8086:0166] type 00 class 0x030000
[ 0.410220] pci 0000:00:02.0: >reg 10: [mem 0xd3400000-0xd37fffff 64bit]
[ 0.410226] pci 0000:00:02.0: >reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.410231] pci 0000:00:02.0: >reg 20: [io 0x4000-0x403f]
[ 0.410281] pci 0000:00:14.0: >[8086:1e31] type 00 class 0x0c0330
[ 0.410303] pci 0000:00:14.0: >reg 10: [mem 0xd3a00000-0xd3a0ffff 64bit]
[ 0.410373] pci 0000:00:14.0: >PME# supported from D3hot D3cold
[ 0.410396] pci 0000:00:16.0: >[8086:1e3a] type 00 class 0x078000
[ 0.410419] pci 0000:00:16.0: >reg 10: [mem 0xd3a14000-0xd3a1400f 64bit]
[ 0.410494] pci 0000:00:16.0: >PME# supported from D0 D3hot D3cold
[ 0.410528] pci 0000:00:1a.0: >[8086:1e2d] type 00 class 0x0c0320
[ 0.410779] pci 0000:00:1a.0: >reg 10: [mem 0xd3a19000-0xd3a193ff]
[ 0.412197] pci 0000:00:1a.0: >PME# supported from D0 D3hot D3cold
[ 0.412223] pci 0000:00:1b.0: >[8086:1e20] type 00 class 0x040300
[ 0.412237] pci 0000:00:1b.0: >reg 10: [mem 0xd3a10000-0xd3a13fff 64bit]
[ 0.412305] pci 0000:00:1b.0: >PME# supported from D0 D3hot D3cold
[ 0.412329] pci 0000:00:1c.0: >[8086:1e10] type 01 class 0x060400
[ 0.412408] pci 0000:00:1c.0: >PME# supported from D0 D3hot D3cold
[ 0.412433] pci 0000:00:1c.1: >[8086:1e12] type 01 class 0x060400
[ 0.412512] pci 0000:00:1c.1: >PME# supported from D0 D3hot D3cold
[ 0.412546] pci 0000:00:1d.0: >[8086:1e26] type 00 class 0x0c0320
[ 0.412788] pci 0000:00:1d.0: >reg 10: [mem 0xd3a18000-0xd3a183ff]
[ 0.414203] pci 0000:00:1d.0: >PME# supported from D0 D3hot D3cold
[ 0.414230] pci 0000:00:1f.0: >[8086:1e59] type 00 class 0x060100
[ 0.414353] pci 0000:00:1f.2: >[8086:1e03] type 00 class 0x010601
[ 0.414371] pci 0000:00:1f.2: >reg 10: [io 0x4088-0x408f]
[ 0.414379] pci 0000:00:1f.2: >reg 14: [io 0x4094-0x4097]
[ 0.414387] pci 0000:00:1f.2: >reg 18: [io 0x4080-0x4087]
[ 0.414396] pci 0000:00:1f.2: >reg 1c: [io 0x4090-0x4093]
[ 0.414404] pci 0000:00:1f.2: >reg 20: [io 0x4060-0x407f]
[ 0.414412] pci 0000:00:1f.2: >reg 24: [mem 0xd3a17000-0xd3a177ff]
[ 0.414457] pci 0000:00:1f.2: >PME# supported from D3hot
[ 0.414475] pci 0000:00:1f.3: >[8086:1e22] type 00 class 0x0c0500
[ 0.414491] pci 0000:00:1f.3: >reg 10: [mem 0xd3a15000-0xd3a150ff 64bit]
[ 0.414512] pci 0000:00:1f.3: >reg 20: [io 0x4040-0x405f]
[ 0.414568] pci 0000:01:00.0: >[10de:0de9] type 00 class 0x030000
[ 0.414578] pci 0000:01:00.0: >reg 10: [mem 0xd2000000-0xd2ffffff]
[ 0.414589] pci 0000:01:00.0: >reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.414600] pci 0000:01:00.0: >reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.414607] pci 0000:01:00.0: >reg 24: [io 0x3000-0x307f]
[ 0.414615] pci 0000:01:00.0: >reg 30: [mem 0xfff80000-0xffffffff pref]
[ 0.419807] pci 0000:00:01.0: >PCI bridge to [bus 01-01]
[ 0.419812] pci 0000:00:01.0: > bridge window [io 0x3000-0x3fff]
[ 0.419816] pci 0000:00:01.0: > bridge window [mem 0xd2000000-0xd30fffff]
[ 0.419834] pci 0000:00:01.0: > bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.419945] pci 0000:02:00.0: >[1969:1090] type 00 class 0x020000
[ 0.420065] pci 0000:02:00.0: >reg 10: [mem 0xd3900000-0xd393ffff 64bit]
[ 0.420115] pci 0000:02:00.0: >reg 18: [io 0x2000-0x207f]
[ 0.420574] pci 0000:02:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
[ 0.426507] pci 0000:00:1c.0: >PCI bridge to [bus 02-02]
[ 0.426512] pci 0000:00:1c.0: > bridge window [io 0x2000-0x2fff]
[ 0.426516] pci 0000:00:1c.0: > bridge window [mem 0xd3900000-0xd39fffff]
[ 0.426588] pci 0000:03:00.0: >[168c:002b] type 00 class 0x028000
[ 0.426615] pci 0000:03:00.0: >reg 10: [mem 0xd3800000-0xd380ffff 64bit]
[ 0.426744] pci 0000:03:00.0: >supports D1
[ 0.426746] pci 0000:03:00.0: >PME# supported from D0 D1 D3hot
[ 0.433127] pci 0000:00:1c.1: >PCI bridge to [bus 03-03]
[ 0.433150] pci 0000:00:1c.1: > bridge window [mem 0xd3800000-0xd38fffff]
[ 0.433170] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.433258] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.433280] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.433313] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 0.433378] \_SB_.PCI0:_OSC invalid UUID
[ 0.433379] _OSC request data:1 1f 1f
[ 0.433382] pci0000:00: >Requesting ACPI _OSC control (0x1d)
[ 0.433416] \_SB_.PCI0:_OSC invalid UUID
[ 0.433417] _OSC request data:1 0 1d
[ 0.433420] pci0000:00: >ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 0.433421] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.435631] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.435669] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.435705] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.435740] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.435774] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.435809] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.435844] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.435879] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.435945] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.435951] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.435952] vgaarb: loaded
[ 0.435953] vgaarb: bridge control possible 0000:01:00.0
[ 0.435954] vgaarb: no bridge control possible 0000:00:02.0
[ 0.435977] PCI: Using ACPI for IRQ routing
[ 0.437526] PCI: pci_cache_line_size set to 64 bytes
[ 0.437598] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.437599] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.437600] e820: reserve RAM buffer [mem 0xbaabf000-0xbbffffff]
[ 0.437602] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
[ 0.437603] e820: reserve RAM buffer [mem 0x13f600000-0x13fffffff]
[ 0.437671] NetLabel: Initializing
[ 0.437672] NetLabel: domain hash size = 128
[ 0.437673] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.437681] NetLabel: unlabeled traffic allowed by default
[ 0.437696] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.437700] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.439709] Switching to clocksource hpet
[ 0.443743] pnp: PnP ACPI init
[ 0.443758] ACPI: bus type pnp registered
[ 0.444001] pnp 00:00: >[bus 00-3e]
[ 0.444004] pnp 00:00: >[io 0x0000-0x0cf7 window]
[ 0.444005] pnp 00:00: >[io 0x0cf8-0x0cff]
[ 0.444007] pnp 00:00: >[io 0x0d00-0xffff window]
[ 0.444008] pnp 00:00: >[mem 0x000a0000-0x000bffff window]
[ 0.444010] pnp 00:00: >[mem 0x000c0000-0x000c3fff window]
[ 0.444011] pnp 00:00: >[mem 0x000c4000-0x000c7fff window]
[ 0.444012] pnp 00:00: >[mem 0x000c8000-0x000cbfff window]
[ 0.444013] pnp 00:00: >[mem 0x000cc000-0x000cffff window]
[ 0.444015] pnp 00:00: >[mem 0x000d0000-0x000d3fff window]
[ 0.444016] pnp 00:00: >[mem 0x000d4000-0x000d7fff window]
[ 0.444017] pnp 00:00: >[mem 0x000d8000-0x000dbfff window]
[ 0.444019] pnp 00:00: >[mem 0x000dc000-0x000dffff window]
[ 0.444021] pnp 00:00: >[mem 0x000e0000-0x000e3fff window]
[ 0.444023] pnp 00:00: >[mem 0x000e4000-0x000e7fff window]
[ 0.444024] pnp 00:00: >[mem 0x000e8000-0x000ebfff window]
[ 0.444025] pnp 00:00: >[mem 0x000ec000-0x000effff window]
[ 0.444027] pnp 00:00: >[mem 0x000f0000-0x000fffff window]
[ 0.444028] pnp 00:00: >[mem 0xbfa00000-0xfeafffff window]
[ 0.444029] pnp 00:00: >[mem 0x00010000-0x0001ffff window]
[ 0.444084] pnp 00:00: >Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.444094] pnp 00:01: >[io 0x0000-0x001f]
[ 0.444095] pnp 00:01: >[io 0x0081-0x0091]
[ 0.444096] pnp 00:01: >[io 0x0093-0x009f]
[ 0.444097] pnp 00:01: >[io 0x00c0-0x00df]
[ 0.444099] pnp 00:01: >[dma 4]
[ 0.444115] pnp 00:01: >Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.444121] pnp 00:02: >[mem 0xff010000-0xffffffff]
[ 0.444135] pnp 00:02: >Plug and Play ACPI device, IDs INT0800 (active)
[ 0.444191] pnp 00:03: >[mem 0xfed00000-0xfed003ff]
[ 0.444207] pnp 00:03: >Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.444214] pnp 00:04: >[io 0x00f0]
[ 0.444222] pnp 00:04: >[irq 13]
[ 0.444238] pnp 00:04: >Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.444246] pnp 00:05: >[io 0x002e-0x002f]
[ 0.444247] pnp 00:05: >[io 0x004e-0x004f]
[ 0.444248] pnp 00:05: >[io 0x0061]
[ 0.444249] pnp 00:05: >[io 0x0063]
[ 0.444251] pnp 00:05: >[io 0x0065]
[ 0.444252] pnp 00:05: >[io 0x0067]
[ 0.444253] pnp 00:05: >[io 0x0070]
[ 0.444254] pnp 00:05: >[io 0x0080]
[ 0.444255] pnp 00:05: >[io 0x0092]
[ 0.444256] pnp 00:05: >[io 0x00b2-0x00b3]
[ 0.444257] pnp 00:05: >[io 0x0680-0x069f]
[ 0.444259] pnp 00:05: >[io 0x1000-0x100f]
[ 0.444260] pnp 00:05: >[io 0xffff]
[ 0.444261] pnp 00:05: >[io 0xffff]
[ 0.444262] pnp 00:05: >[io 0x0400-0x0453]
[ 0.444263] pnp 00:05: >[io 0x0458-0x047f]
[ 0.444264] pnp 00:05: >[io 0x0500-0x057f]
[ 0.444266] pnp 00:05: >[io 0x164e-0x164f]
[ 0.444267] pnp 00:05: >[io 0xfd60-0xfd63]
[ 0.444300] system 00:05: >[io 0x0680-0x069f] has been reserved
[ 0.444302] system 00:05: >[io 0x1000-0x100f] has been reserved
[ 0.444303] system 00:05: >[io 0xffff] has been reserved
[ 0.444305] system 00:05: >[io 0xffff] has been reserved
[ 0.444306] system 00:05: >[io 0x0400-0x0453] has been reserved
[ 0.444308] system 00:05: >[io 0x0458-0x047f] has been reserved
[ 0.444309] system 00:05: >[io 0x0500-0x057f] has been reserved
[ 0.444311] system 00:05: >[io 0x164e-0x164f] has been reserved
[ 0.444312] system 00:05: >[io 0xfd60-0xfd63] has been reserved
[ 0.444315] system 00:05: >Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.444322] pnp 00:06: >[io 0x0070-0x0077]
[ 0.444327] pnp 00:06: >[irq 8]
[ 0.444341] pnp 00:06: >Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.444360] pnp 00:07: >[io 0x0454-0x0457]
[ 0.444385] system 00:07: >[io 0x0454-0x0457] has been reserved
[ 0.444387] system 00:07: >Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.444394] pnp 00:08: >[io 0x0060]
[ 0.444396] pnp 00:08: >[io 0x0064]
[ 0.444400] pnp 00:08: >[irq 1]
[ 0.444416] pnp 00:08: >Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.444460] pnp 00:09: >[irq 12]
[ 0.444479] pnp 00:09: >Plug and Play ACPI device, IDs ETD0613 ETD0001 PNP0f13 (active)
[ 0.503108] pnp 00:0a: >[mem 0xfed1c000-0xfed1ffff]
[ 0.503110] pnp 00:0a: >[mem 0xfed10000-0xfed17fff]
[ 0.503111] pnp 00:0a: >[mem 0xfed18000-0xfed18fff]
[ 0.503113] pnp 00:0a: >[mem 0xfed19000-0xfed19fff]
[ 0.503114] pnp 00:0a: >[mem 0xf0000000-0xf3ffffff]
[ 0.503115] pnp 00:0a: >[mem 0xfed20000-0xfed3ffff]
[ 0.503116] pnp 00:0a: >[mem 0xfed90000-0xfed93fff]
[ 0.503117] pnp 00:0a: >[mem 0xff000000-0xff000fff]
[ 0.503119] pnp 00:0a: >[mem 0xff010000-0xffffffff]
[ 0.503120] pnp 00:0a: >[mem 0xfee00000-0xfeefffff]
[ 0.503121] pnp 00:0a: >[mem 0xbfa00000-0xbfa00fff]
[ 0.503153] system 00:0a: >[mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.503154] system 00:0a: >[mem 0xfed10000-0xfed17fff] has been reserved
[ 0.503156] system 00:0a: >[mem 0xfed18000-0xfed18fff] has been reserved
[ 0.503159] system 00:0a: >[mem 0xfed19000-0xfed19fff] has been reserved
[ 0.503161] system 00:0a: >[mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.503162] system 00:0a: >[mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.503164] system 00:0a: >[mem 0xfed90000-0xfed93fff] has been reserved
[ 0.503165] system 00:0a: >[mem 0xff000000-0xff000fff] has been reserved
[ 0.503167] system 00:0a: >[mem 0xff010000-0xffffffff] could not be reserved
[ 0.503169] system 00:0a: >[mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.503170] system 00:0a: >[mem 0xbfa00000-0xbfa00fff] has been reserved
[ 0.503173] system 00:0a: >Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.503426] pnp 00:0b: >[mem 0x20000000-0x201fffff]
[ 0.503428] pnp 00:0b: >[mem 0x40004000-0x40004fff]
[ 0.503467] system 00:0b: >[mem 0x20000000-0x201fffff] has been reserved
[ 0.503469] system 00:0b: >[mem 0x40004000-0x40004fff] has been reserved
[ 0.503471] system 00:0b: >Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.503484] pnp: PnP ACPI: found 12 devices
[ 0.503485] ACPI: ACPI bus type pnp unregistered
[ 0.509719] pci 0000:01:00.0: >no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[ 0.509749] pci 0000:01:00.0: >BAR 6: assigned [mem 0xd3000000-0xd307ffff pref]
[ 0.509751] pci 0000:00:01.0: >PCI bridge to [bus 01-01]
[ 0.509753] pci 0000:00:01.0: > bridge window [io 0x3000-0x3fff]
[ 0.509756] pci 0000:00:01.0: > bridge window [mem 0xd2000000-0xd30fffff]
[ 0.509758] pci 0000:00:01.0: > bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.509761] pci 0000:00:1c.0: >PCI bridge to [bus 02-02]
[ 0.509764] pci 0000:00:1c.0: > bridge window [io 0x2000-0x2fff]
[ 0.509769] pci 0000:00:1c.0: > bridge window [mem 0xd3900000-0xd39fffff]
[ 0.509778] pci 0000:00:1c.1: >PCI bridge to [bus 03-03]
[ 0.509783] pci 0000:00:1c.1: > bridge window [mem 0xd3800000-0xd38fffff]
[ 0.509815] pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7]
[ 0.509816] pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff]
[ 0.509818] pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
[ 0.509819] pci_bus 0000:00: >resource 7 [mem 0xbfa00000-0xfeafffff]
[ 0.509821] pci_bus 0000:01: >resource 0 [io 0x3000-0x3fff]
[ 0.509822] pci_bus 0000:01: >resource 1 [mem 0xd2000000-0xd30fffff]
[ 0.509824] pci_bus 0000:01: >resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.509825] pci_bus 0000:02: >resource 0 [io 0x2000-0x2fff]
[ 0.509827] pci_bus 0000:02: >resource 1 [mem 0xd3900000-0xd39fffff]
[ 0.509828] pci_bus 0000:03: >resource 1 [mem 0xd3800000-0xd38fffff]
[ 0.509849] NET: Registered protocol family 2
[ 0.509940] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.510462] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.511934] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.512121] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.512123] TCP: reno registered
[ 0.512131] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.512148] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.512215] NET: Registered protocol family 1
[ 0.512227] pci 0000:00:02.0: >Boot video device
[ 0.539686] PCI: CLS 64 bytes, default 64
[ 0.539720] Unpacking initramfs...
[ 0.587463] Freeing initrd memory: 3004k freed
[ 0.587782] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.587786] software IO TLB [mem 0xb6ab9000-0xbaab8fff] (64MB) mapped at [ffff8800b6ab9000-ffff8800baab8fff]
[ 0.587808] Simple Boot Flag at 0x44 set to 0x1
[ 0.588188] audit: initializing netlink socket (disabled)
[ 0.588201] type=2000 audit(1351239412.473:1): initialized
[ 0.598216] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.599469] VFS: Disk quotas dquot_6.5.2
[ 0.599501] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.599601] msgmni has been set to 7715
[ 0.599760] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.599785] io scheduler noop registered
[ 0.599786] io scheduler deadline registered
[ 0.599824] io scheduler cfq registered (default)
[ 0.599901] pcieport 0000:00:01.0: >irq 40 for MSI/MSI-X
[ 0.600058] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[ 0.600059] vesafb: scrolling: redraw
[ 0.600061] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.600464] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005100000, using 4160k, total 4160k
[ 0.667429] Console: switching to colour frame buffer device 170x48
[ 0.734140] fb0: VESA VGA frame buffer device
[ 0.734147] intel_idle: does not run on family 6 model 58
[ 0.734170] GHES: HEST is not enabled!
[ 0.734209] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.734579] Linux agpgart interface v0.103
[ 0.734634] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS4] at 0x60,0x64 irq 1,12
[ 0.748568] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.748578] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.748663] mousedev: PS/2 mouse device common for all mice
[ 0.748692] rtc_cmos 00:06: >RTC can wake from S4
[ 0.748829] rtc_cmos 00:06: >rtc core: registered rtc_cmos as rtc0
[ 0.748861] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.748868] cpuidle: using governor ladder
[ 0.748870] cpuidle: using governor menu
[ 0.748966] drop_monitor: Initializing network drop monitor service
[ 0.749023] TCP: cubic registered
[ 0.749094] NET: Registered protocol family 10
[ 0.749220] NET: Registered protocol family 17
[ 0.749227] Key type dns_resolver registered
[ 0.749314] PM: Checking hibernation image partition /dev/disk/by-uuid/007e49dc-18dc-442a-89c8-ab927e6a17ff
[ 0.762323] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.775385] PM: Hibernation image not present or could not be loaded.
[ 0.775393] registered taskstats version 1
[ 0.775839] rtc_cmos 00:06: >setting system clock to 2012-10-26 08:16:53 UTC (1351239413)
[ 0.776874] Freeing unused kernel memory: 760k freed
[ 0.776957] Write protecting the kernel read-only data: 8192k
[ 0.780137] Freeing unused kernel memory: 1472k freed
[ 0.781606] Freeing unused kernel memory: 608k freed
[ 0.787240] systemd-udevd[47]: starting version 194
[ 0.813888] ACPI: bus type usb registered
[ 0.813910] usbcore: registered new interface driver usbfs
[ 0.813918] usbcore: registered new interface driver hub
[ 0.813955] usbcore: registered new device driver usb
[ 0.815211] SCSI subsystem initialized
[ 0.816356] libata version 3.00 loaded.
[ 0.816442] xhci_hcd 0000:00:14.0: >setting latency timer to 64
[ 0.816447] xhci_hcd 0000:00:14.0: >xHCI Host Controller
[ 0.816456] xhci_hcd 0000:00:14.0: >new USB bus registered, assigned bus number 1
[ 0.816560] xhci_hcd 0000:00:14.0: >cache line size of 64 is not supported
[ 0.816578] xhci_hcd 0000:00:14.0: >irq 21, io mem 0xd3a00000
[ 0.816632] xhci_hcd 0000:00:14.0: >irq 41 for MSI/MSI-X
[ 0.816791] xHCI xhci_add_endpoint called for root hub
[ 0.816793] xHCI xhci_check_bandwidth called for root hub
[ 0.816874] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.816904] hub 1-0:1.0: >USB hub found
[ 0.816914] hub 1-0:1.0: >4 ports detected
[ 0.817280] xhci_hcd 0000:00:14.0: >xHCI Host Controller
[ 0.817286] xhci_hcd 0000:00:14.0: >new USB bus registered, assigned bus number 2
[ 0.817469] xHCI xhci_add_endpoint called for root hub
[ 0.817471] xHCI xhci_check_bandwidth called for root hub
[ 0.817493] hub 2-0:1.0: >USB hub found
[ 0.817500] hub 2-0:1.0: >4 ports detected
[ 0.822755] ehci_hcd 0000:00:1a.0: >setting latency timer to 64
[ 0.822761] ehci_hcd 0000:00:1a.0: >EHCI Host Controller
[ 0.822768] ehci_hcd 0000:00:1a.0: >new USB bus registered, assigned bus number 3
[ 0.822798] ehci_hcd 0000:00:1a.0: >debug port 2
[ 0.826690] ehci_hcd 0000:00:1a.0: >cache line size of 64 is not supported
[ 0.826709] ehci_hcd 0000:00:1a.0: >irq 16, io mem 0xd3a19000
[ 0.835913] ehci_hcd 0000:00:1a.0: >USB 2.0 started, EHCI 1.00
[ 0.836049] hub 3-0:1.0: >USB hub found
[ 0.836052] hub 3-0:1.0: >2 ports detected
[ 0.836166] ehci_hcd 0000:00:1d.0: >setting latency timer to 64
[ 0.836170] ehci_hcd 0000:00:1d.0: >EHCI Host Controller
[ 0.836177] ehci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 4
[ 0.836203] ehci_hcd 0000:00:1d.0: >debug port 2
[ 0.840097] ehci_hcd 0000:00:1d.0: >cache line size of 64 is not supported
[ 0.840110] ehci_hcd 0000:00:1d.0: >irq 23, io mem 0xd3a18000
[ 0.849231] ehci_hcd 0000:00:1d.0: >USB 2.0 started, EHCI 1.00
[ 0.849353] hub 4-0:1.0: >USB hub found
[ 0.849356] hub 4-0:1.0: >2 ports detected
[ 0.849406] ahci 0000:00:1f.2: >version 3.0
[ 0.849473] ahci 0000:00:1f.2: >irq 42 for MSI/MSI-X
[ 0.849524] ahci: SSS flag set, parallel bus scan disabled
[ 0.862579] ahci 0000:00:1f.2: >AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[ 0.862582] ahci 0000:00:1f.2: >flags: 64bit ncq stag pm led clo pio slum part ems apst
[ 0.862586] ahci 0000:00:1f.2: >setting latency timer to 64
[ 0.869649] scsi0 : ahci
[ 0.869722] scsi1 : ahci
[ 0.869780] scsi2 : ahci
[ 0.869834] scsi3 : ahci
[ 0.869889] scsi4 : ahci
[ 0.869943] scsi5 : ahci
[ 0.870010] ata1: SATA max UDMA/133 abar m2048@0xd3a17000 port 0xd3a17100 irq 42
[ 0.870011] ata2: DUMMY
[ 0.870014] ata3: SATA max UDMA/133 abar m2048@0xd3a17000 port 0xd3a17200 irq 42
[ 0.870015] ata4: DUMMY
[ 0.870016] ata5: DUMMY
[ 0.870016] ata6: DUMMY
[ 1.142189] usb 3-1: >new high-speed USB device number 2 using ehci_hcd
[ 1.188798] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.242364] ata1.00: ATA-8: ST9500325AS, 0011LVM1, max UDMA/100
[ 1.242367] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.244122] ata1.00: configured for UDMA/100
[ 1.244233] scsi 0:0:0:0: >Direct-Access ATA ST9500325AS 0011 PQ: 0 ANSI: 5
[ 1.265963] hub 3-1:1.0: >USB hub found
[ 1.266053] hub 3-1:1.0: >6 ports detected
[ 1.371886] usb 4-1: >new high-speed USB device number 2 using ehci_hcd
[ 1.495531] hub 4-1:1.0: >USB hub found
[ 1.495628] hub 4-1:1.0: >6 ports detected
[ 1.561668] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.561806] usb 3-1.3: >new full-speed USB device number 3 using ehci_hcd
[ 1.566490] ata3.00: ATAPI: PLDS DVD-RW DS8A8SH, KL31, max UDMA/100
[ 1.567395] ata3.00: configured for UDMA/100
[ 1.569763] scsi 2:0:0:0: >CD-ROM PLDS DVD-RW DS8A8SH KL31 PQ: 0 ANSI: 5
[ 1.572713] sd 0:0:0:0: >[sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.572771] sd 0:0:0:0: >[sda] Write Protect is off
[ 1.572774] sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00
[ 1.572806] sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.579557] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.579561] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.579683] sr 2:0:0:0: >Attached scsi CD-ROM sr0
[ 1.588282] Refined TSC clocksource calibration: 2494.333 MHz.
[ 1.588300] Switching to clocksource tsc
[ 1.646147] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
[ 1.646510] sd 0:0:0:0: >[sda] Attached SCSI disk
[ 1.711612] usb 3-1.4: >new high-speed USB device number 4 using ehci_hcd
[ 1.861415] usb 4-1.6: >new high-speed USB device number 3 using ehci_hcd
[ 3.905748] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 6.297029] systemd-udevd[165]: starting version 194
[ 6.879435] ACPI: Requesting acpi_cpufreq
[ 6.901533] Monitor-Mwait will be used to enter C-1 state
[ 6.901538] Monitor-Mwait will be used to enter C-2 state
[ 6.901542] ACPI: acpi_idle registered with cpuidle
[ 7.242423] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input1
[ 7.242428] ACPI: Power Button [PWRB]
[ 7.243055] ACPI: AC Adapter [ACAD] (on-line)
[ 7.243224] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input2
[ 7.243227] ACPI: Sleep Button [SLPB]
[ 7.243264] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 7.243282] ACPI: Lid Switch [LID0]
[ 7.243312] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 7.243314] ACPI: Power Button [PWRF]
[ 7.250773] thermal LNXTHERM:00: >registered as thermal_zone0
[ 7.250778] ACPI: Thermal Zone [TZ00] (54 C)
[ 7.450794] ACPI: Battery Slot [BAT1] (battery present)
[ 7.582945] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
[ 7.612108] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x12
[ 7.612381] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x12
[ 7.612637] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x12
[ 7.612948] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 7.634516] input: Ideapad extra buttons as /devices/platform/ideapad/input/input5
[ 7.648434] Compat-wireless backport release: compat-wireless-v3.6-rc6-1-npc
[ 7.648436] Backport based on linux-stable.git v3.6-rc6
[ 7.648436] compat.git: linux-stable.git
[ 7.734886] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[ 7.734890] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.734893] ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
[ 7.734896] ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20120320/utaddress-251)
[ 7.734898] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.734899] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 7.737294] mei 0000:00:16.0: >setting latency timer to 64
[ 7.737362] mei 0000:00:16.0: >irq 43 for MSI/MSI-X
[ 7.743686] mei 0000:00:16.0: >wd: failed to find the client
[ 7.757142] agpgart-intel 0000:00:00.0: >Intel Ivybridge Chipset
[ 7.757223] agpgart-intel 0000:00:00.0: >detected gtt size: 2097152K total, 262144K mappable
[ 7.758105] agpgart-intel 0000:00:00.0: >detected 65536K stolen memory
[ 7.758213] agpgart-intel 0000:00:00.0: >AGP aperture is 256M @ 0xe0000000
[ 7.972440] Qualcomm Atheros(R) AR813x/AR815x/AR816x PCI-E Ethernet Network Driver
[ 7.972474] alx 0000:02:00.0: >DMA to 64-BIT addresses
[ 7.972555] alx 0000:02:00.0: >(unregistered net_device): HW Flags = 0x15
[ 7.973019] alx 0000:02:00.0: >(unregistered net_device): reset PHY, pws = 1, az = 0, ptp = 0
[ 7.974361] alx 0000:02:00.0: >(unregistered net_device): speed = 0x2f, autoneg = 1
[ 7.975707] alx 0000:02:00.0: >irq 44 for MSI/MSI-X
[ 7.975824] alx: Atheros Gigabit Network Connection
[ 7.977650] snd_hda_intel 0000:00:1b.0: >irq 45 for MSI/MSI-X
[ 8.008080] [drm] Initialized drm 1.1.0 20060810
[ 8.066122] iTCO_vendor_support: vendor-support=0
[ 8.075437] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
[ 8.078855] scsi6 : SCSI emulation for RTS5139 USB card reader
[ 8.078971] scsi 6:0:0:0: >Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
[ 8.080194] sd 6:0:0:0: >[sdb] Attached SCSI removable disk
[ 8.080898] usbcore: registered new interface driver rts5139
[ 8.166428] cfg80211: Calling CRDA to update world regulatory domain
[ 8.175247] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 8.175288] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 8.175343] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.188460] Linux media interface: v0.10
[ 8.307532] Linux video capture interface: v2.00
[ 8.337832] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (04f2:b2e2)
[ 8.339661] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/input/input6
[ 8.339707] usbcore: registered new interface driver uvcvideo
[ 8.339708] USB Video Class driver (1.1.1)
[ 8.477762] Bluetooth: Core ver 2.16
[ 8.477776] NET: Registered protocol family 31
[ 8.477777] Bluetooth: HCI device and connection manager initialized
[ 8.477779] Bluetooth: HCI socket layer initialized
[ 8.477780] Bluetooth: L2CAP socket layer initialized
[ 8.477784] Bluetooth: SCO socket layer initialized
[ 8.491954] usbcore: registered new interface driver btusb
[ 8.639211] hda_codec: CX20590: BIOS auto-probing.
[ 8.640020] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 8.672690] psmouse serio1: >elantech: assuming hardware version 3 (with firmware version 0x450f02)
[ 8.697264] psmouse serio1: >elantech: Synaptics capabilities query result 0x78, 0x17, 0x0b.
[ 8.709692] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 8.709766] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 8.709813] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 8.710242] ACPI Warning: 0x0000000000004040-0x000000000000405f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
[ 8.710247] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.710479] checking generic (e0000000 410000) vs hw (e0000000 10000000)
[ 8.710481] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 8.710502] Console: switching to colour dummy device 80x25
[ 8.710580] i915 0000:00:02.0: >setting latency timer to 64
[ 8.744483] i915 0000:00:02.0: >irq 46 for MSI/MSI-X
[ 8.744490] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 8.744491] [drm] Driver supports precise vblank timestamp query.
[ 8.745029] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 8.745030] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[ 8.825185] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input11
[ 9.132101] nvidia: disagrees about version of symbol module_layout
[ 9.243757] usbcore: registered new interface driver ath3k
[ 9.265032] usb 3-1.3: >USB disconnect, device number 3
[ 9.265920] systemd-udevd[329]: failed to execute '/opt/VirtualBox/VBoxCreateUSBNode.sh' '/opt/VirtualBox/VBoxCreateUSBNode.sh --remove 189 258': No such file or directory
[ 9.273016] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 9.400084] ath: EEPROM regdomain: 0x65
[ 9.400085] ath: EEPROM indicates we should expect a direct regpair map
[ 9.400087] ath: Country alpha2 being used: 00
[ 9.400088] ath: Regpair used: 0x65
[ 9.421060] fbcon: inteldrmfb (fb0) is primary device
[ 9.487637] ieee80211 phy0: >Selected rate control algorithm 'ath9k_rate_control'
[ 9.487781] Registered led device: ath9k-phy0
[ 9.487785] ieee80211 phy0: >Atheros AR9285 Rev:2 mem=0xffffc900050e0000, irq=17
[ 9.552614] kvm: disabled by bios
[ 9.556577] kvm: disabled by bios
[ 9.601270] Console: switching to colour frame buffer device 170x48
[ 9.602975] fb0: inteldrmfb frame buffer device
[ 9.602976] drm: registered panic notifier
[ 9.603101] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 9.605310] acpi device:38: >registered as cooling_device4
[ 9.605524] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 9.605938] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:36/LNXVIDEO:00/input/input12
[ 9.611483] acpi device:44: >registered as cooling_device5
[ 9.611810] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 9.611971] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input13
[ 9.612048] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 9.960891] usb 3-1.3: >new full-speed USB device number 5 using ehci_hcd
[ 10.048160] systemd-udevd[343]: failed to execute '/opt/VirtualBox/VBoxCreateUSBNode.sh' '/opt/VirtualBox/VBoxCreateUSBNode.sh 189 260 e0': No such file or directory
[ 11.761061] EXT4-fs (sda7): re-mounted. Opts: data=ordered
[ 11.956330] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: data=ordered
[ 12.074341] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: data=ordered
[ 12.321742] fuse init (API version 7.19)
[ 12.703502] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 12.770085] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 12.840886] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 12.906640] Adding 16016768k swap on /dev/sda6. Priority:-1 extents:1 across:16016768k
I'm sorry for my English.
Last edited by Kot Dymok (2012-10-26 08:29:53)

I don't see any messages of loading nvidia ("NVRM") or nouveau. Are you sure that you have installed a module that is compatible with your current kernel?
You'll also need to patch your ACPI handle or the nouveau/nvidia driver will refuse to load at all, see https://github.com/Bumblebee-Project/bbswitch/issues/2 (this is specific to some machines, your Lenovo G580 machine included)
Last edited by Lekensteyn (2012-10-29 14:52:55)

[Solved] Nvidia module fails to load on lastest kernel (3.6.7-1-ARCH)

Hi there!
I have just updated my desktop PC yesterday, as I normally do every week (yaourt -Syu --aur), and today when I rebooted my Xorg refuses to load.
I've checked the logs, etc, and I think there's a problem with the nvidia module. In fact, I can't even modprobe it.
I've googled for hours, but I can't find any solution out there...
Here you have the log: https://dl.dropbox.com/u/1732176/Xorg.0.log
Any hint will be appreciated...
Thanks in advance ^^
Last edited by roobre (2012-11-24 16:18:40)

falconindy wrote:
[ 24.672] (EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
[ 24.672] (EE) NVIDIA: system's kernel log for additional error messages.
Perhaps you should look at dmesg.
Thanks!
Looking there I found:
[ 5.371106] NVRM: The NVIDIA GeForce 7100 / nForce 630i GPU installed in this system is
NVRM: supported through the NVIDIA 304.xx Legacy drivers. Please
NVRM: visit http://www.nvidia.com/object/unix.html for more
NVRM: information. The 310.19 NVIDIA driver will ignore
NVRM: this GPU. Continuing probe...
I'll try to pacman those drivers and check again...
[EDIT]
Yeehaa!
It works! ^^
Thank you so much
Last edited by roobre (2012-11-24 16:18:27)

Nvidia module in X fails to load after Patch 118844-28

I'm new to Solaris so please bear with me.
I just received a shipment of Ultra 20 workstations and while setting up one of them, I used the Update manager to install all the patches. After installing the kernel update, X fails to run since the Nvidia module doesn't load, which makes sense since its a new kernel(Is this wrong, I'm used to Linux).
So I download the latest nvidia module from Nvidia.com and the installer runs with no problem. I reboot and still no go.
I've looked around and found something about using the update_drv command, and I tried that with no luck. Used reboot -- -r to reconfigure everything and still nothing. There is nothing that stands out from dmesg, so I'm at my wits end.
Any ideas?

After installing
the kernel update, X fails to run since the Nvidia
module doesn't load, which makes sense since its a
new kernel(Is this wrong, I'm used to Linux).I don't know why X or the Nvidia module fails after the kernel
upgrade...
But for Solaris is does not make sense that drivers start to fail
when the kernel is patched. This assumes the driver is using
documented kernel interfaces only - in this case a kernel update
should not cause driver failures.

[SOLVED] Kernel Update & nVIDIA latency

Hi friends. I've got this problem when i upgraded the kernel and the nVIDIA drivers.
http://ompldr.org/vZGZvNg
When i start Blender, it has a latency that doesn't have before.
I've an nVidia Geforce 6100 nForce 405.
Linux machina 3.3.2-1-ARCH #1 SMP PREEMPT Sat Apr 14 10:08:43 UTC 2012 i686 AMD Sempron(tm) Processor 3400+ AuthenticAMD GNU/Linux
There are the last 200 lines of dmesg:
[ 1.754859] pata_acpi 0000:00:06.0: setting latency timer to 64
[ 1.755468] pata_amd 0000:00:06.0: version 0.4.1
[ 1.755519] pata_amd 0000:00:06.0: setting latency timer to 64
[ 1.759270] sd 1:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.759324] sd 1:0:0:0: [sda] Write Protect is off
[ 1.759328] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.759351] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.759671] scsi2 : pata_amd
[ 1.761136] scsi3 : pata_amd
[ 1.761686] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 1.761690] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.798754] sda: sda1 sda2 < sda5 sda6 sda7 > sda3
[ 1.799307] sd 1:0:0:0: [sda] Attached SCSI disk
[ 2.157042] ata3.00: ATAPI: HL-DT-STDVD-RAM GSA-H54N, 1.00, max UDMA/66
[ 2.157050] ata3.01: ATAPI: SONY CD-RW CRX230EE, 2YS3, max UDMA/33
[ 2.157060] ata3: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5c00000) ACPI=0x1f01f (30:60:0x1f)
[ 2.157066] ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc5c00000) ACPI=0x701f (30:60:0x1f)
[ 2.170299] ata3.00: configured for UDMA/66
[ 2.200227] ata3.01: configured for UDMA/33
[ 2.205371] scsi 2:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H54N 1.00 PQ: 0 ANSI: 5
[ 2.206479] scsi 2:0:1:0: CD-ROM SONY CD-RW CRX230EE 2YS3 PQ: 0 ANSI: 5
[ 2.206694] ata4: port disabled--ignoring
[ 2.210059] usb 2-2: new low-speed USB device number 3 using ohci_hcd
[ 2.217468] sr0: scsi3-mmc drive: 125x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.217474] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.217742] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.221192] input: WALTOP Tablet as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input0
[ 2.221238] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 2.221458] sr 2:0:1:0: Attached scsi CD-ROM sr1
[ 2.221667] generic-usb 0003:172F:0038.0001: input,hidraw0: USB HID v1.10 Mouse [ WALTOP Tablet ] on usb-0000:00:02.0-1/input0
[ 2.221694] usbcore: registered new interface driver usbhid
[ 2.221696] usbhid: USB HID core driver
[ 2.408649] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input1
[ 2.408740] generic-usb 0003:04F3:0103.0002: input,hidraw1: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-0000:00:02.0-2/input0
[ 2.420202] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.1/input/input2
[ 2.420282] generic-usb 0003:04F3:0103.0003: input,hidraw2: USB HID v1.10 Device [HID 04f3:0103] on usb-0000:00:02.0-2/input1
[ 3.051957] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 6.913577] udevd[126]: starting version 182
[ 8.022098] ACPI: Fan [FAN] (on)
[ 8.183545] gameport gameport0: EMU10K1 is pci0000:01:06.1/gameport0, io 0xc800, speed 59659kHz
[ 8.192402] Floppy drive(s): fd0 is 1.44M
[ 8.207420] FDC 0 is a post-1991 82077
[ 8.248074] thermal LNXTHERM:00: registered as thermal_zone0
[ 8.248079] ACPI: Thermal Zone [THRM] (40 C)
[ 8.256224] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 8.256234] ACPI: Power Button [PWRB]
[ 8.256326] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 8.256331] ACPI: Power Button [PWRF]
[ 8.346886] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 8.347116] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
[ 8.347141] forcedeth 0000:00:07.0: setting latency timer to 64
[ 8.382209] psmouse serio1: hgpk: ID: 10 00 64
[ 8.531957] cfg80211: Calling CRDA to update world regulatory domain
[ 8.610050] Linux agpgart interface v0.103
[ 8.611246] IT8726 SuperIO detected.
[ 8.611581] parport_pc 00:09: reported by Plug and Play ACPI
[ 8.611642] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 8.762747] ppdev: user-space parallel port driver
[ 8.866130] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 8.866190] snd_emu10k1x 0000:01:06.0: setting latency timer to 64
[ 8.866197] Model 1003 Rev 00000000 Serial 10031102
[ 8.871105] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x50ef @ 1, addr 00:19:21:dc:53:d2
[ 8.871111] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
[ 8.871430] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 8.871748] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[ 8.871780] i2c i2c-1: nForce2 SMBus adapter at 0xf400
[ 8.975921] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 9.275869] usb 1-3: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
[ 9.510853] ath9k_htc 1-3:1.0: ath9k_htc: HTC initialized with 33 credits
[ 9.548830] nvidia: module license 'NVIDIA' taints kernel.
[ 9.548837] Disabling lock debugging due to kernel taint
[ 9.595148] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 23
[ 9.595164] nvidia 0000:00:0d.0: setting latency timer to 64
[ 9.595171] vgaarb: device changed decodes: PCI:0000:00:0d.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 9.595992] NVRM: loading NVIDIA UNIX x86 Kernel Module 295.40 Thu Apr 5 21:28:09 PDT 2012
[ 9.700981] ath9k_htc 1-3:1.0: ath9k_htc: FW Version: 1.3
[ 9.700985] ath: EEPROM regdomain: 0x809c
[ 9.700987] ath: EEPROM indicates we should expect a country code
[ 9.700990] ath: doing EEPROM country->regdmn map search
[ 9.700992] ath: country maps to regdmn code: 0x52
[ 9.700995] ath: Country alpha2 being used: CN
[ 9.700997] ath: Regpair used: 0x52
[ 10.143823] ieee80211 phy0: Atheros AR9271 Rev:1
[ 10.144790] Registered led device: ath9k_htc-phy0
[ 10.144795] usb 1-3: ath9k_htc: USB layer initialized
[ 10.144824] usbcore: registered new interface driver ath9k_htc
[ 10.924965] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 11.112244] fuse init (API version 7.18)
[ 12.260476] Adding 530108k swap on /dev/sda6. Priority:-1 extents:1 across:530108k
[ 17.150049] usb 1-4: new high-speed USB device number 5 using ehci_hcd
[ 17.464775] usbcore: registered new interface driver uas
[ 17.473252] Initializing USB Mass Storage driver...
[ 17.473608] usb-storage 1-4:1.0: Quirks match for vid 071b pid 3203: 400
[ 17.473640] scsi4 : usb-storage 1-4:1.0
[ 17.474183] usbcore: registered new interface driver usb-storage
[ 17.474188] USB Mass Storage support registered.
[ 18.752550] scsi 4:0:0:0: Direct-Access RockChip USB MP3 1.00 PQ: 0 ANSI: 0
[ 18.755264] scsi 4:0:0:1: Direct-Access RockChip USB SD 1.00 PQ: 0 ANSI: 0 CCS
[ 18.757010] sd 4:0:0:0: [sdb] 8113152 512-byte logical blocks: (4.15 GB/3.86 GiB)
[ 18.758264] sd 4:0:0:0: [sdb] Write Protect is off
[ 18.758271] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 18.758880] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 18.759376] sd 4:0:0:0: [sdb] No Caching mode page present
[ 18.759417] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 18.762868] sd 4:0:0:0: [sdb] No Caching mode page present
[ 18.762906] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 18.764554] sdb:
[ 18.766947] sd 4:0:0:0: [sdb] No Caching mode page present
[ 18.766986] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 18.767022] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 69.447431] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 87.591048] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 90.730377] wlan0: authenticate with 1c:bd:b9:ca:dd:67 (try 1)
[ 90.732558] wlan0: authenticated
[ 90.826254] wlan0: associate with 1c:bd:b9:ca:dd:67 (try 1)
[ 90.828690] wlan0: RX AssocResp from 1c:bd:b9:ca:dd:67 (capab=0x411 status=0 aid=3)
[ 90.828696] wlan0: associated
[ 90.828701] wlan0: moving STA 1c:bd:b9:ca:dd:67 to state 1
[ 90.828704] wlan0: moving STA 1c:bd:b9:ca:dd:67 to state 2
[ 90.834302] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 90.834579] wlan0: moving STA 1c:bd:b9:ca:dd:67 to state 3
[ 100.883338] wlan0: no IPv6 routers present
[ 182.446959] Netfilter messages via NETLINK v0.30.
[ 183.410466] device wlan0 entered promiscuous mode
[ 183.417003] ettercap uses obsolete (PF_INET,SOCK_PACKET)
[ 183.530800] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 183.544599] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 269.171525] device wlan0 left promiscuous mode
[ 279.947116] device wlan0 entered promiscuous mode
[ 292.066274] device wlan0 left promiscuous mode
[ 311.193796] device wlan0 entered promiscuous mode
[ 957.482100] usb 1-4: USB disconnect, device number 5
[ 959.303285] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 973.756608] usb 1-4: new high-speed USB device number 7 using ehci_hcd
[ 973.881588] usb-storage 1-4:1.0: Quirks match for vid 071b pid 3203: 400
[ 973.881613] scsi5 : usb-storage 1-4:1.0
[ 975.159102] scsi 5:0:0:0: Direct-Access RockChip USB MP3 1.00 PQ: 0 ANSI: 0
[ 975.161844] scsi 5:0:0:1: Direct-Access RockChip USB SD 1.00 PQ: 0 ANSI: 0 CCS
[ 975.162594] sd 5:0:0:0: [sdb] 8113152 512-byte logical blocks: (4.15 GB/3.86 GiB)
[ 975.163108] sd 5:0:0:0: [sdb] Write Protect is off
[ 975.163114] sd 5:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 975.163720] sd 5:0:0:0: [sdb] No Caching mode page present
[ 975.163726] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 975.166974] sd 5:0:0:0: [sdb] No Caching mode page present
[ 975.166981] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 975.169398] sdb:
[ 975.171343] sd 5:0:0:1: [sdc] Attached SCSI removable disk
[ 975.172974] sd 5:0:0:0: [sdb] No Caching mode page present
[ 975.172981] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 975.172985] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 1315.192404] JFS: nTxBlock = 8192, nTxLock = 65536
[ 1315.273969] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 1315.276185] SGI XFS Quota Management subsystem
[ 1323.168570] mdadm: sending ioctl 800c0910 to a partition!
[ 1323.168576] mdadm: sending ioctl 800c0910 to a partition!
[ 1323.168582] mdadm: sending ioctl 1261 to a partition!
[ 1323.168584] mdadm: sending ioctl 1261 to a partition!
[ 1323.186973] mdadm: sending ioctl 1261 to a partition!
[ 1323.186979] mdadm: sending ioctl 1261 to a partition!
[ 1323.188520] mdadm: sending ioctl 1261 to a partition!
[ 1323.188522] mdadm: sending ioctl 1261 to a partition!
[ 1323.203659] mdadm: sending ioctl 1261 to a partition!
[ 1323.203665] mdadm: sending ioctl 1261 to a partition!
[ 1325.176709] device-mapper: uevent: version 1.0.3
[ 1325.177760] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
[ 1457.503964] scsi_verify_blk_ioctl: 82 callbacks suppressed
[ 1457.503968] mdadm: sending ioctl 800c0910 to a partition!
[ 1457.503973] mdadm: sending ioctl 800c0910 to a partition!
[ 1457.503986] mdadm: sending ioctl 1261 to a partition!
[ 1457.503988] mdadm: sending ioctl 1261 to a partition!
[ 1457.505581] mdadm: sending ioctl 1261 to a partition!
[ 1457.505584] mdadm: sending ioctl 1261 to a partition!
[ 1457.506314] mdadm: sending ioctl 1261 to a partition!
[ 1457.506317] mdadm: sending ioctl 1261 to a partition!
[ 1457.507354] mdadm: sending ioctl 1261 to a partition!
[ 1457.507360] mdadm: sending ioctl 1261 to a partition!
[ 1481.374348] scsi_verify_blk_ioctl: 96 callbacks suppressed
[ 1481.374354] mdadm: sending ioctl 800c0910 to a partition!
[ 1481.374357] mdadm: sending ioctl 800c0910 to a partition!
[ 1481.374363] mdadm: sending ioctl 1261 to a partition!
[ 1481.374366] mdadm: sending ioctl 1261 to a partition!
[ 1481.388224] mdadm: sending ioctl 1261 to a partition!
[ 1481.388230] mdadm: sending ioctl 1261 to a partition!
[ 1481.389771] mdadm: sending ioctl 1261 to a partition!
[ 1481.389773] mdadm: sending ioctl 1261 to a partition!
[ 1481.389934] mdadm: sending ioctl 1261 to a partition!
[ 1481.389937] mdadm: sending ioctl 1261 to a partition!
[ 1505.934227] scsi_verify_blk_ioctl: 82 callbacks suppressed
[ 1505.934232] mdadm: sending ioctl 800c0910 to a partition!
[ 1505.934236] mdadm: sending ioctl 800c0910 to a partition!
[ 1505.934249] mdadm: sending ioctl 1261 to a partition!
[ 1505.934252] mdadm: sending ioctl 1261 to a partition!
[ 1505.935841] mdadm: sending ioctl 1261 to a partition!
[ 1505.935844] mdadm: sending ioctl 1261 to a partition!
[ 1505.937039] mdadm: sending ioctl 1261 to a partition!
[ 1505.937044] mdadm: sending ioctl 1261 to a partition!
[ 1505.937953] mdadm: sending ioctl 1261 to a partition!
[ 1505.937955] mdadm: sending ioctl 1261 to a partition!
[ 1601.422116] usb 1-4: USB disconnect, device number 7
[18525.907292] device wlan0 left promiscuous mode
Also, this problem affects my mp4 chinese ipod. It has an ugly latency that doesn't happens before.
Thanks in advance
gabo
Last edited by iamgabo (2012-04-22 20:35:44)

Hi,
I would be possible that this has to do with http://nvidia.custhelp.com/app/answers/detail/a_id/3109. They have fixed it and the result is a performance regression.
http://www.phoronix.com/scan.php?page=n … px=MTA4ODQ

Set up systemd with bumblebee. Now Xorg loads nvidia module.

I have the nvidia module blacklisted in /etc/modprobe.d/modprobe.conf.
I have bbswitch set to turn the card off when it loads up using "options bbswitch load_state=0 unload_state=0" in /etc/modprobe.d/modprobe.conf.
I have confirmed that the bbswitch module believes these configuration options are set, and I know that the card is successfully turned off when Bumblebee loads up.
But when I load into my login manager (SLiM), the card gets powered on and the module is loaded up. I don't think bbswitch is involved.
Is there any way to trace exactly which process loads a module?
Is there something simple I'm missing?

Thanks for the heads up! But that introduces the problem that I won't be set up for DKMS. Seems like a lose-lose situation with how often Arch updates the kernel. My cheap hack works for now. When I get a chance I may try to get the best of both worlds and build a dkms-nvidia-bumblebee of my own.

Nvidia module does not exist in /proc/modules

Hi!
I compiled kernel with grsecurity from AUR. everything goes fine, and my system boot with a new kernel.
Only thing i have a problem with, is nvidia module.
I'm tried to makepkg nvidia with ABS way, but i get errors:
ERROR: Module nvidia does not exist in /proc/modules
In order to use the new nvidia module, exit Xserver and unload it manualy.
I"m trying to do:
modprobe nvidia
but i get:
FATAL: Error inserting nvidia (/lib/modules/2.6.32-grsec-ARCH/kernel/drivers/video/nvidia.ko): Cannot allocate memory
When i write :find /lib/modules -name nvidia.ko
I get: lib/modules/2.6.32-grsec-ARCH/kernel/drivers/video/nvidia.ko
When i write: uname -r
I get: 2.6.32-grsec-ARCH
Any help please..

you have to reboot after installing nvidia because the > 2.6.34 kernel has nouveau and is using the card.

How do I update Nvidia 9400M GeForce drivers on MacBook late 2009?

How do I update Nvidia 9400M GeForce drivers on MacBook late 2009?
I've got a huge fps drop problem on my mac, and i've called apple support, they told me to update Nvidia Graphics Card or something. How do i do this?

Nope, I'll do that, but since I've seen you here before, can I ask you something regarding my HD?
I've been transferring about 1.6 GB from my USB stick, and when it is going on with the transfer, my computer just freezes, i can move the mouse but not click anywhere. then after some time i can click again, but then it freezes again. And it takes like 10 times longer to transfer.
And also, would it work to transfer a windows xp.iso to my usb stick, and then install windows using boot camp?
And also, would it work if I purchase 4GB or 2GB + 4GB (6GB) RAM to my Macbook unibody late 2009?
And also, would it work if i purchased RAM memory originally from a macbook Pro?

Regarding update function module

Hi all,
This is regrding update function module
How to handle errors in update function module
Can exception be used in Update function modules
while calling in update Task
if we can use please let me know how to do so while calling in Update task.
Regards,
siva chalasani.

Hi Vinod,
Just wanted to say...
your answer solved my problem.
I needed to pass my error records into a internal table and from there to notepad using GUI_DOWNLOAD.
The following is my function module....
RHPP_Q_PROFILE_WRITE
It has under TABLES-- 'err_profile' to capture error records.
So, I passed a internal table in " err_profile" to capture the errors.
And then passed this internal table in GUI_DOWNLOAD.
Regards,
Hari Kiran
Edited by: HARI KIRAN REDDY on Aug 12, 2008 12:20 PM

Multiple call of update function module

Hi Everybody,
I have made implementation to the definition MB_DOCUMENT_BADI( material Document creation).
While executing this BADI I am getting short dum with this error Multiple call of update function module.
Here is the short dump--
In the FORM routine Buchen_Ausfuehren (program SAPMM07M), an error
message was issued by a Business Add-In (BAdI) or function module.
This is not permitted, because it could lead to data
inconsistencies. For this reason, the update of the material
document was also terminated with a termination message (dump).
Note that this message (M7 372) is not the responsible error
message.
Please any body suggest the way forward.
Regards,
Sandeep.

Hi Kiran,
Thanks for the reply.
I have created one implementation to the BADI MB_DOCUMENT_BADI. This badi will hit while creation of material document.I have write the code in method MB_DOCUMENT_BEFORE_UPDATE such that it will act only for certain movement types specially for t-codeMb1a and MB31.
What problem I am facing i have used a error message "MB_DOCUMENT_BEFORE_UPDATE" in this method.If we got the erroe message then we dont need to post the material dcoument,but here problem is that if the material document could not posted then it corrupt the material and when we performing 261/101 we got error message like " Inconsistency between MM and ML for material and plant"
I have used following things like-
1-while updating the customized table using " Commit Work".
2-Call function vb_change_batch for updating the batch and not in update task.
3. Dequeue the table after updating the table.
Will thos things can create any inconsistency to the MM and ML.
Please suggest me uor thoughts.
Thanks
sandeep.
Thanks ,
sandeep.

[svn] 758: Updating all modules to Java 1.5.0 and Ant 1.7.0

Revision: 758
Author: [email protected]
Date: 2008-03-07 10:47:56 -0800 (Fri, 07 Mar 2008)
Log Message:
Updating all modules to Java 1.5.0 and Ant 1.7.0
* Updated setup.sh to reflect this.
* Added an Eclipse project called flex-asc; it's required to run the other compiler projects now (now you can build and debug the entire compiler, including asc, all in Eclipse; I've removed the reference to asc.jar).
* The other Eclipse projects now specify Java 1.5.
* Revving asc.jar for compatibility with Java 1.5; it's taken from the 3.0.x branch temporarily while mainline asc is fixed up.
* Fixed some assertions in mainline ASC (commenting them out with comments means fixing them, in this case)
* Fixed some in-your-face warnings in the modules when compiling.
* This will probably break the build, so hold tight. Preemptively, I'm on it...
Modified Paths:
flex/sdk/trunk/README.txt
flex/sdk/trunk/development/eclipse/java/flex-compiler/.classpath
flex/sdk/trunk/development/eclipse/java/flex-compiler/.settings/org.eclipse.jdt.core.pref s
flex/sdk/trunk/development/eclipse/java/flex-compiler/.settings/org.eclipse.jdt.ui.prefs
flex/sdk/trunk/development/eclipse/java/flex-debugger/.classpath
flex/sdk/trunk/development/eclipse/java/flex-debugger/.settings/org.eclipse.jdt.core.pref s
flex/sdk/trunk/development/eclipse/java/flex-debugger/.settings/org.eclipse.jdt.ui.prefs
flex/sdk/trunk/development/eclipse/java/flex-jars/.classpath
flex/sdk/trunk/development/eclipse/java/flex-swfutils/.classpath
flex/sdk/trunk/development/eclipse/java/flex-swfutils/.settings/org.eclipse.jdt.core.pref s
flex/sdk/trunk/development/eclipse/java/flex-swfutils/.settings/org.eclipse.jdt.ui.prefs
flex/sdk/trunk/lib/asc.jar
flex/sdk/trunk/modules/antTasks/build.xml
flex/sdk/trunk/modules/asc/README.txt
flex/sdk/trunk/modules/asc/build/java/build.xml
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/embedding/LintEvaluator.java
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/parser/MetaDataEvaluator.java
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/util/Context.java
flex/sdk/trunk/modules/compiler/build.xml
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/API.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/config/ConfigurationBuffer.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/swc/zip/ZipEntry.java
flex/sdk/trunk/modules/compiler/src/java/flex2/tools/ToolsConfiguration.java
flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/Library.java
flex/sdk/trunk/modules/debugger/build.xml
flex/sdk/trunk/modules/swfutils/build.xml
flex/sdk/trunk/modules/swfutils/src/java/flash/util/ExceptionUtil.java
flex/sdk/trunk/setup.sh
Added Paths:
flex/sdk/trunk/development/eclipse/java/flex-asc/
flex/sdk/trunk/development/eclipse/java/flex-asc/.classpath
flex/sdk/trunk/development/eclipse/java/flex-asc/.project
flex/sdk/trunk/development/eclipse/java/flex-asc/.settings/
flex/sdk/trunk/development/eclipse/java/flex-asc/.settings/org.eclipse.jdt.core.prefs
flex/sdk/trunk/development/eclipse/java/flex-asc/.settings/org.eclipse.jdt.ui.prefs
flex/sdk/trunk/development/eclipse/java/flex-jars/.settings/
flex/sdk/trunk/development/eclipse/java/flex-jars/.settings/org.eclipse.jdt.core.prefs
Property Changed:
flex/sdk/trunk/development/eclipse/java/flex-compiler/
flex/sdk/trunk/development/eclipse/java/flex-debugger/
flex/sdk/trunk/development/eclipse/java/flex-jars/
flex/sdk/trunk/development/eclipse/java/flex-swfutils/

I'm expieriencing the very same problem, i.e. code compilation with a 1.5.0_06 compiler and execution on a 1.5.0_06 jre works fine, but the code parser will display an red line under a code line like the following:
Vector<String> sv = new Vector<String>();
I did what was hinted to in the reply. I connected to archive rt.jar in the jre-director of the jdk-1.5 and connected the javadoc for 1.5, but I still have the red lines.
I have also added the argument -source 1.5 to the compiler, but nothing seems to help.
Any hints very much appreciated. Many thanks.
Pasqualino

3D Graph Merge Module Problem

I am using a 3rd party intaller (InstallShield Express) to produce my
distributables. Into my project i insert the required merge modules, such
as the run-time engine. However when i try to include the ComponentWorks 3D
graph merge module InstallShield cannot merge it into the build. Has anyone
else experienced this or know why this might be happening.

Tom,
If you are using .NET in this project then you may need the updated merge modules, you can get then here:
Unable to Import Merge Module Error When Building Installer in Visual Studio .NET with Measurement Studio 6.0 Merge Modules.
http://digital.ni.com/public.nsf/websearch/36C5E45E15A6862D86256B79005F89BB?OpenDocument
Otherwise this should work just fine, here is the link to it.
Distributing Visual C++ Projects That Contain Tools for Visual C++ Components
http://digital.ni.com/public.nsf/websearch/41694B641CEFF03D862568B900546BCE?OpenDocument
Depending on the error that you get when you insert the merge module you may need to repaor the installation. Depending on the version that you are using you can go to add/remove programs and repair
it, if this is specific to the 3D graph then this could fix it.
Please keep me posted on this problem.
regards,
Juan Carlos
N.I.

Updated nvidia module problems

Similar Messages

Maybe you are looking for