Updated phone page and when I ftp'd "modified files" it never changed the page

I wasn't ready to load the phone part of Muse but already added a logo and contact info. When I saw that it was on my phone I went back into Muse and added a text block stating we are updating the mobile site. When I ftp'd the "modified files" the page never changed. Any idea? I checked my layers and everything. After I added the block I went back into Muse and changed the wording. After ftping the modified files again it wrote over it and now there are two layers of text over each other! ugh! So I thought I would just delete them both. Wrong. They are both still there. Any clue?

Select "All Files" when doing the FTP upload.
Muse relies solely on the information in the muse_manifest.xml file to determine what files have changed since Muse last uploaded files. If you manually add, edit or delete files from your site Muse will be completely unaware of those changes and you'll need to upload with "All Files" select in order to get Muse back in sync with what files (and file versions) are on your site.
Muse takes this approach because manually checking every file for changes over FTP during every FTP upload would be very slow.

Similar Messages

I have iCloud on MY PC and when I try to download attachments it is changing the file name to messagepart. What can i do to change this?

I have iCloud on MY PC and when I try to download attachments it is changing the file name to messagepart. What can i do to change this?

I don't think this is an iCloud issue- it is the latest release of Safari. Firefox attachments are still correctly downloaded.
This needs some interest from Apple techs.

I have an iPhone 5 and when I'm playing music I can't change the song or start and pause on any of the shortcuts, what can I do ?

When I'm playing music and am on other things and swipe the shortcuts up, I am in able to change the song or pause and play, the same thing happens when I have locked my phone.
I have to keep unlocking my phone and going into my music to change the song, this is very frustrating!
I've gone onto settings but I am unable to find anything that will change this?
What can I do?!

I never use than switch and I had forgotten it existed but yes that was the problem.
Thank you I would have gone nuts. As they say there is no fool like an old fool.
Thanks again.
Kempsta

I have just bought Macbookpro and when ı connect digital camera from firewire port ı never see the image at macbook pro.

I have just bought the macbook pro. When i connect the digital camera (sony dxc-c33p) to mac from firewire port i never see this camera imovie or quick time programs. Macbook pro never connect the digital cameras via firewire port. What can i do to solve this problem?

We are sony dealer for profesional medical products and i want to connect sony dxc-c33 digital camera to mac via firewire port. it is very interesting;
1. i have new imac at the office with latest software. when i have connected the camera it worked perfect no problem.
2. i have bought new macbook pro last week. when i connected the camera it didn't work.
3. i have connected the camera to imac mini with latest software. it worked perfect no problem.
4. finally i went to apple support office and we connected the camera and tried to take movie at four different brand new macbook pro but they didn't work.
Also when we lived this problem we have already contacted with sony support and no problem from this side. Iam still thinking the problem is firewire port at macbook pro. Finally we contacted exclusive dealer of apple in my country but they didn't solve and understand the problem yet until today (it passed 15 days)

When opening a new tab, how can I change the page that is initially displayed?

When I open a new tab, the page that is initially displayed is one that provides a simple Bing! search. What can I do to make the initial display one of my own choosing?

Select Firefox (Top left) / Options/ Options / Main or General.
There you can select the thing you whant firefox to do when it is started up. If you would like it to open www.google.com for instance, you have to paste that url (= www.google.com) into the space below.
That's it!

Can anyone tell me why a picture would change color when I try to download/upload it? It is the exact same picture- chosen the same way and when it goes to any other program it changes the color (I've tried canvas on demand and mpixpro. I've also tried

Can anyone tell me why this picture changes color when I try to download/upload it? It is the exact same picture I have taken from the same location. The image on the left is via preview and the image on the right is what is shows like when I try to download it. I have emailed it to myself and it shows fine on the computer and in CS4, but when I look at the download via my phone or on another computer it shows the wonky color on the right. I have checked the color space shows RGB/8 bit. Any ideas why or how to fix it? It isn't with any one specific session.... and I've tried it on both my desktop and my laptop- saved image to an external hard drive and to drop box. I've tried sending the image to canvas on demand, my email, mpxipro, POST editing- all the same result. Please HELP!! What am I doing wrong?

Most of the time you see something like that. The image in question has a color profile other then sRGB. Some image viewers/displayers are color managed and others are not. So the image do not look the same in all of the applications you use. So colors seem to change.
Try converting it to sRGB color and see if then looks the same all around. Also I think PC and Mac displays are set to different gamma something like 1.8 and 2.2
Though I'm colorblind I even see color variations.

How to change the page header?

Hi,
I just installed and started using Plumtree 6.0 a month ago, and we are still in a trial phase for our company's portal.
I want to change the default page header to replace Plumtree logo to my company's logo. I thought I can change it in the style sheet, but I didn't find where to change in the cssmill folder. I found an artical in edocs.bea.com saying I can modify the header by using ALI Publisher, but I don't know what's the right way to do it and faster.
Can someone guide me how to change the page header?
Thank you. (if this is not the correct forum to post the question, please let me know which forum should I go)

Depends on what you want to do. Personally, I'd do a header portlet and not touch the Plumtree/BEA logos. They're likely to be overwritten when the product receives updates.
This may seem like a lot of steps, but really - it goes quickly
** Think through what you want to display. If all you want to do is replace the image, but you wan to keep the overall layout style then you can create a simple replacement header
Step 1 - create a header portlet
=======================
If you're using Publisher...
=====
* Create a new portlet - choose the Header portlet template
* Upload your image / change the header in the rich text editor
If you're not using Publisher
=====
* Personally, static HTML will do just fine - create a folder and html file called something like "mybanner/mybanner.htm" on your remote portlet server
* Plop in an image (you'll want to swipe some adaptive tags for community and page name - can always stick those in later)
* Create a new remote portlet web service that references this HTML page
* Create a portlet from the web service - make sure the type is "header"
Step 2 - turn it on
=======================
* Create a new experience definition (or modify default - I usually create a new one so you can move it between environments)
* In the experience definition's "header / footer" settings area, tell the header to load from the new header portlet you created
* If you created a custom experience definition, modify your experience rules to load this experience defiintion according to whatever parameters you think make sense (just be careful you don't knock out your login page - we usually use security groups to just say "hey - the user is logged in and is, in fact, a member of this portal - that'll still let your login pages load)
Done
May seem like a lot of work, but really it's just a series of simple steps. Advantage here is you can vary things as you see fit and also just feel safe that the next time Plumtree/BEA updates those imageserver files you'll be good to go. From there you can get as fancy schmancy as you like using adaptive tags, etc. Heck - make it a .NET app if you want and do some crazy personalization or something. Embed stock tickers, important news alerts, whatever.
That help at all?
Thanks,
Eric

HT5624 My wife and I share the same apple id, we just updated our iphones. When we were asked if we wanted to share the same apple id for icloud we said yes, now our phones can't face time, please help?

My wife and I share the same apple id, we just updated our iphones. When we were asked if we wanted to share the same apple id for icloud we said yes, now our phones can't face time, please help?

Read http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
If you wish to share an Apple ID with family members then read: http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/

I updated my pages app on my ipad and when I tried to open a document it says the file format is invalid. None of my documents are opening pleaser help!

I updated my pages app on my ipad and when I tried to open a document it says the file format is invalid. None of my documents are opening pleaser help!!!!

Try this. It worked for me.
I discovered the same problem. I had an older version of Pages on my iPad. After updating it to the latest version all my previous documents created in pages for the iPad were rendered unreadable and a message stated that they were an invalid format. Why for the life of me would a program that was created by Apple and sense updated not be able to read previous versions...well that's a whole other sad story. Any way I discovered how to fix it but it would require that you had backup your iPad on a computer and not emptied your trash. If this sounds good than here is how you fix it... And it worked for me.
These steps will enable you to reinstall a previous version of the Pages app so you can be able to read and edit older documents.
FIRST: if you did backup your iPad using your computer and did not empty your trash, GOTO the trash and look for PAGES 1.4 (or other number) ipa ( that's the file extension) ie PAGES 1.4 ipa.
SECOND: move that file out of the trash and onto your desktop. Once you do this, double click on it and a box will come up stating a newer version has been found and do you want to revert back to older version. ANSWER YES. It will than automatically place and overwrite the older version back into the file on iTunes that contains the rest of your backed up apps.
THIRD: and this is where it is important that your backup would have to have been on your computer. I'm not sure if backup on the cloud will work. iCloud backup at your own risk And here's why. Before you restore you will need to remove the latest version of Pages off your iPad by doing the usual : holding down the home button until the apps wiggle and remove by pressing on X on app. Removing off your iPad will also delete all your documents but if you have a previous backup on your computer those documents will be stored safely on itunes and will return.
FORTH: plug your iPad into your computer and allow it to sync so iTunes will recognize it. Once iTunes is up and you can see that it recognizes your iPad, GOTO "FILE/DEVICES/RESTORE FROM BACKUP." ******* DO NOT CLICK ON BACKUP***** click on RESTORE FROM BACKUP. This will reinstall all previous settings and documents that were their when you backuped PLUS the older version of Pages that you placed back from the above steps. Let it run through all the setups ( this could take up to 20 minutes...depending on amount of data and photos and apps).
FIFTH: Once everything is reinstalled a message will popup on your computer stating "to leave iPad plugged in until iTunes recognizes it again" ( it's basically rebooting itself). Once done (leave iPad plugged in still) GOTO iPad and follow the steps. IMPORTANT: iPad will ask you if you want to SET IT UP AS A NEW IPAD, BACK UP FROM THE CLOUD or BACK UP FROM ITUNES.....press SET UP AS NEW IPAD. Follow all of the steps required. Once complete GOTO iTunes on computer, look for "IPAD" plus a little arrow ( should be on upper right corner of iTunes window, click on it ( this will safely disconnect your iPad from iTunes) . Now unplug iPad from computer and go to your iPad and look for the older version of Pages. It should be there along with all your old documents ( readable and editable too).
Hope this helps. Good luck.

TS3694 I was updating the latest software i.e iOS 6 on 3gs and battery got finished and now I cant turn my phone on and when I update it with itunes error 3194 comes up

I was updating the latest software i.e iOS 6 on 3gs and battery got finished and now I cant turn my phone on and when I update it with itunes error 3194 comes up

Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.

I updated my iphone and when it came time for activation it won't work and keeps telling me to try again. At the top it says "No Service" and I have my SIM card in and a good WiFi connection and have connected it through iTunes but it says I have no SIM

I updated my iphone and when it came time for activation it won't work and keeps telling me to try again. At the top it says "No Service" and I have my SIM card in and a good WiFi connection and have connected it through iTunes but it says I have no SIM card and need to disconnect and insert my SIM. I don't understand why this keeps happening and it's been going on for a wile now. I have tried over and over again to get this iPhone to work but nothig is happening. I've even gone on the website for support (apple.com/support) but cannot find anything that will help me with this situation. Can someone please help me find a solution to this problem? I have been without a phone and do not have money to buy another one and it is crucial for me to get it fixed. Thanks.

wesb
What computer operating system is involved in the Premiere Elements 11 and 13 issues? Same computer or different ones? Are you installing from purchased download installation files or from purchased installation disc? Does Premiere Elements 11 work completely on this computer whereas 13 will not?
Let us go through the typical drill so as to take nothing for granted.
1. Does the problem exist with or without the antivirus and firewall(s) disabled? Are you working with an individual home computer or in a
school or company network?
2. Are you running the program as Administrator and is there any "domain" account involved?
3. Is your video card/graphics card up to date according to the web site of the manufacturer of the card?
4. Do you have the latest version of QuickTime installed on the computer with Premiere Elements?
Let us start by ruling in or out any of the above, and then we can decide what next.
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

After uploading our phones with the latest update, we have noticed that the battery life has deminished considerably. I now have to charge my phone overnight and two or three times a day. Prior to the update, my battery life lasted me at least a full day

After uploading our phones with the latest update, we have noticed that the battery life has deminished considerably. I now have to charge my phone overnight and two or three times a day. Prior to the update, my battery life lasted me at least a full day. We have several phones in our office and the ones that have updated (4) now have issue holding a charge/battery life. I really liked this phone and can not believe that you are now going to charge us $79 a battery to fix what is most definately a problem with your latest update. I know other people outside of our company that are having the same problem. Not to mention when I called AT&T it was confirmed to me that they are hearing the same issue and then some from other customers as well. Your own people, once I talked to them earlier today, told me they are showing a history of issues that are showing up after the update was put in place. Of course she tried to say, "Maybe the age of the battery and the update both contributed". Whatever.
I want you all to know how disappointed I am in your company for the handling of this issue. I always thought "Apple" was the line I didn't have to worry about having any types of issue. And that you all would stand behined your product 100%. Now I am not so sure.
I would love to hear back from your company on how you perceive the issue with all of these phones that prior to the update didn't have any issues and how after the update THEY ARE NOW having issues. I do not believe this was an issue due to the age of a battery and that was pretty lame to say so. It was fine and now its not.
Please feel free to contact me and help me figure out a way to pay for all of the batteries that will be needed for our company to contiue doing business as needed.
Thank you.
Web Address (URL):
5106 McNarney

Sorry this is a user to user technical forum. There is NO APPLE here as stated in the term of use when you signed up for this forum.
here are some battery tips
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
http://www.apple.com/batteries/iphone.html

Firefox updated to 5. now when i want a new tab none of my previous pages come up listed like they used to how do I make it do that again

before updating to 5.0 today Firefox used to show me the most visited pages on screen when I pressed New Tab. now all I get is a blank page with a search box. Where can I get back the page listings like that used to show when New Tab pressed I couldnt find anything in Help? thanks

See also:
*New Tab Tools: https://addons.mozilla.org/firefox/addon/new-tab-tools/
Note that you can also do this without an extension by creating a <b>userContent.css</b> file and placing code in this file to hide the search bar.
*http://kb.mozillazine.org/userContent.css
<pre><nowiki>@-moz-document url(about:newtab){
#newtab-margin-top, #newtab-search-container {display:none!important}
</nowiki></pre>
The customization files userContent.css (websites) and userChrome.css (user interface) are located in the <b>chrome</b> folder in the Firefox profile folder.
*http://kb.mozillazine.org/Editing_configuration
*Create the chrome folder (lowercase) in the <xxxxxxxx>.default profile folder if this folder doesn't exist
*Use a plain text editor like Notepad to create a (new) userContent.css file in the chrome folder (file name is case sensitive)
*Paste the code in the userContent.css file in the editor window
*Make sure that the userChrome.css file starts with the default @namespace line
*Make sure that you select "All files" and not "Text files" when you save the file via "Save file as" in the text editor as userContent.css. Otherwise Windows may add a hidden .txt file extension and you end up with a not working userContent.css.txt file

I've been using my cell phone number to imessage from my ipad for a while now, but yesterday I got signed out of I message and when I signed back in, I didn't get the option to use my number, only my email adress. How can I fix that?

I've been using my cell phone number to imessage from my ipad for a while now, but yesterday I got signed out of I message and when I signed back in, I didn't get the option to use my number, only my email adress. How can I fix that?

Hey bill.rizzo2,
Thanks for the question. I understand your phone number is missing on your iPad as an option for iMessage. The following article provides steps to resolve this issue:
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Phone number missing on iPad or iPod touch
If your phone number isn't listed on an iPod touch or iPad, follow these steps:
1. Update to the latest version of iOS.
2. Verify that you're using the same Apple ID that you're using on your iPhone.
3. On your iPad or iPod touch, sign out of your Apple ID in the following locations:
    - Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
    - Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
4. Sign in to your Apple ID with FaceTime and iMessage.
If your phone number still isn't listed, follow these steps:
1. Sign out of your Apple ID on all iOS devices, including your iPhone, in the following locations:
    - Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
    - Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
2. Sign in to your Apple ID on your iPhone.
3. When activation is complete, your Apple ID and all verified email addresses should be visible in Settings > Messages > Receive At and Settings > FaceTime.
4. Sign in to your Apple ID on your other iOS devices.
Thanks,
Matt M.

HT201317 I recently had my phone fixed and when they fixed it they wipe the phones memory but had everything saved but how do I retrieve my photos ?

I recently had my phone fixed and when they fixed it they wipe the phones memory but had everything saved but how do I retrieve my photos ?

Welcome to the Apple Community.
Navigate to Settings > General > Software Update and install any updates available.
Navigate to Settings > General > Reset > Erase all contents and settings on the device you want to restore.
When this completes and the Set-Up Assistant starts, choose "Restore from iCloud Backup" and enter your iCloud account and password. You will see the three most recent backups for each of the devices on which you enabled Backup. Choose which backup to restore from.

Updated phone page and when I ftp'd "modified files" it never changed the page

Similar Messages

Maybe you are looking for