Updated RAM fine, but when I boot to boot camp windows drive I get beeps
Got Crucial 8GB upgrade kit, watched video, booted fine and showed new RAM level. But when I tried to boot to Window's Boot Camp partition I got beep that signifies bad RAM install or whatever.
Is there a setting to change or something to update the Windows parameters on the new RAM...I can't find one.
sorry for digging up an old thread, but what was the problem?
Similar Messages
-
Photos in my from my iPhone have the same numbering as photos from my digital camera. They all go into iPhoto fine but when I backup to my ext hard drive it will only save one with the name IMG 1002 and I have two separate images both with that name. How do I get them all to save on my ext hard drive and hope do I prevent this numbering overlap in the future? I'm really hoping I don't have to go through and manually rename every single picture. Thanks.
How are you backing up the photos? The best way is to backup the library itself as that will preserve your organizational efforts as well as all metadata like keywords, titles, faces, places, books, etc.
You can use a backup application that does incremental backups. Thus only the first backup is a full one and subsequent backups just copy those files that are new or changed. I use Synk Pro. The lower cost version, Synk, will do the same job. Other similar apps can be found at MacUpdate.com.
OR: upload your camera to a folder on the Desktop. There you can rename the files to something that is more informative than just the file name. I use the date (international format) along with a brief desc: 2007-1-20-adian1stbday-001.jpg. File renaming apps can also be found at MacUpdate.com. Also you can give the folder an informatve name which will become the Event name when you import the folder of photos into iPhoto.
OT -
How do you switch iMac 27" display when in Boot Camp (Windows 7)?
Hello,
My 27" iMac works great as an external display as long as the iMac is booted into OS X and I hit command-F2.
When I boot my iMac into Boot Camp (Windows 7) however, hitting command-F2 doesn't work to use my iMac as an external display.
Is there any way to get the 27" iMac to enter external display mode if you have booted it into Windows 7 rather than OS X?
Thanks!I have the same problem, 64bit Win7 Home Ed. loaded with all the recent updates including a Bootcamp patch from last week.
I posted on 9/2/10 and haven't gotten a reply. Did a lot of Google searching but only found it is a problem many have, but that no "real" solution is available.
Since I have had issues in Win7 after it crashes this way and after on/off (unlike you), I'm not willing to mess with it anymore.
I doubt Microsoft will commit to fixing this and it's not likely to be a top priority for Apple. -
I'm trying to playa game called day z (not sure if many are familiar) through boot camp 5 and the newest version of windows 8 it's pretty much a must to hear everything going on around me and I can't exactly do that when the sound drivers aren't working. I've updated all of my software and still nothing is working. If anyone has a link to the newest windows 8 sound drivers it'd be greatly appreciated. Or if you have any other solutions it would be greatly appreciated!
I'd recommend reposting in the Boot Camp forum, with a few exceptions most people on this forum only speak OS X. That forum can be found at:
https://discussions.apple.com/community/windows_software/boot_camp -
Can't Install Windows in Boot Camp - Windows Driver Issue
Before update to Mavericks, I had an installation of WIndows 7 running in Bootcamp. I had updated this to Windows 8.
Just prior to Mavericks release, the hard drive in my MacBook Pro started to fail. I had a full backup of the OS X partitiion, but did not have one of Windows.
After the drive was replaced, I did a fresh install of Mavericks and I'm planning on doing new installs of my apps over the coming days. (It's an opportunity to clear-out remains of old apps/OS's.) I have hit a wall with Boot Camp, though:
I used the Boot Camp Assistant to download the driver sets ("Windows support software") to a USB stick and partition the HD. However, although the Mac then boots off the Windows 8 (64-bit) installer DVD I can only get as far as choosing the installation language before I get stuck on the next step where it's looking for missing drivers. At first, I thought this was some reference to the ones downloaded from Apple, but I am now pretty certain that these just get installed after [in] Windows to allow access to the Apple hardware.
I have tried installing Windows 7 and get hung-up at the same point (which did not happen on 10.8).
Does anyone have any insight into what's happening and how I can get around the problem please?Just chiming in - having the same issue as Bernard and Ian here myself, but with Windows 7 Ultimate 64 bit. Trying to install on MBP Late 2013, Mavericks, using USB. I get through the bootcamp phase to the language selection in Windows and then get the drivers error message.
Called apple tech support and they indicated that OEMs can sometimes be lightweight versions of the DVD installers (i.e. they leave out certain drivers because they assume a certain set of hardware components will be present, typically hardware that perhaps only PCs have and Macs don't) - so they suggested trying to get my hands on a retail version of the ISO file that might have all of the drivers necessary. I tried downloading every feasible iteration of the windows trial ISOs here but every one of them gave me the same error message in Windows setup. My next step is to call microsoft to ask them for a "complete" ISO - I'm hoping they can cooperate since I do have a valid, un-used authentication code for my Windows product. I'll let you know if this works.
In the meantime - has anyone found an easier fix? -
Not sure if I have to repeat question, but I cannot access the iTunes HELP from the Store on my PC (Dell laptop/Windows 7) - opens the box, but it remains blank/white, never fills in with HELP information. Any thoughts? dee
I would check with HP. Your scanner may need a firmware update and updated HP software. Start here:
http://www8.hp.com/us/en/hp-search/search-results.html?qt=LaserJet+m1217nfw+MFP& cc=us&lang=en&charset=utf-8&qp=&hpn=&hpa=&hps=&hpr=&cat=¤t_url=CSSres
then here:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw _lang=&product=4075472 -
Cursor problem when I boot to Windows
So, I've used a Windows 7 install disk with Boot Camp to create a Windows partition, but, when I boot to Windows, the cursor isn't on the 'select country options' install screen. I'm running the latest version of Mavericks (10.9.4) and am using a MacBook Pro 13-inch Retina.
To out it differently, I'm getting no mouse, trackpad or keyboard response when trying to install Windows. PLEASE HELP!!!!Sorry, really bad typos there and I put it rather badly...
What I mean is that I used Bootcamp and booted to the Windows partition. It was working fine until it comes to the 'Installing Windows' screen, where it tells me to select my keyboard, currency and language options, but my keyboard is un-responsive and the backlighting i';t working, my trackpad cursor doesn't show up on screen and my mouse (a Windows-compatible options) has the same problem as the trackpad. I've tried 'wriggling' the mouse around, but that doesn't work...
Please help, I really need to use Windows 7!!!
Thanks in advance!
~Wayne -
I tried updating my iPhone with the latest update. It downloads the update to my computer fine, but when it tries to update the phone, I keep getting a fault code of 3014. I've tried it four times.
Try taking it to the nearest Apple Store. They should have computers there that they can use to get your iPhone out of recovery mode. Make an appointment first.
-
After plugging in my iPhone 4s to iTunes it asks me to update my software. I went to update to the latest iTunes software, download went fine but when completed, I couldnt open iTunes. I uninstalled and reinstalled again and its happening again. I click on the iTunes icon to open but nothing happens? (Im a WindowsPC user)
Restart Computer.
Refer steps here to delete SC file(s):
Win7/Vista http://support.apple.com/kb/TS2363
WinXP http://support.apple.com/kb/TS1776
Then proceed to repair your QuickTime. START > CONTROL PANEL
WinXP - Add n Remove Programs
Win7/Vista - Programs n Features
highlight QUICKTIME and click CHANGE then REPAIR -
Disk Utility says everything's fine, but Install disk doesn't find my internal drive as a possible destination. When I startup with Command + S, I get a looping "cannot mount errno = 19" message.
Problem started when I used Tech Tool Pro 6 to "de-fragment volume". Had to cancel that process before it finished because I ran out of time. Thereafter, when I startup my machine normally, I get the gray Apple logo at first, but it changes to a prohibited symbol (circle with a slash thru it) and hangs.
When I startup holding the Option key, I can see my internal drive, but I get the same results as above.
When I startup using the MacBook OSX Install DVD, it does not find my internal drive as possible destination.
When I startup using the MacBook OSX Install DVD and then run Disk Utility, it finds my drive, allows me to "repair" and says everything is fine.
When I startup with Command + S, I get a looping error message "errno = 19" and cannot stop it to do anything else.
When I startup from Disk Warrior v4.4, it does not find my internal drive to do any repairs.
When I startup from Tech Tool Pro 6 and run the "computer check" diagnostics, everything passes but the Volume Structure, which fails at "Volume Extents (B-tree)." When I use TTP's "Tools" option to run "volume repair" it will show my internal drive and allow me to click the GO button, but nothing happens and nothing changes.
I have a Time Machine backup on an external USB drive, but for as long as the internal drive doesn't mount, I can't use the backup to restore.It's a false report and should be ignored.
I would not rely on TT as I've already said earlier even before Grant posted similar advice.
I really think the Rigid Disk Block may be corrupted. This holds the partition map and could prevent a volume from being unmounted. Unfortunately, there is no way to fix that without repartitioning the drive which will remove everything. So, before going down this road I hope you have backups or can make a backup.
Drive Partition and Format
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Proceed with reinstalling OS X.
5. Download and install Mac OS X 10.6.8 Update Combo v1.1. -
why is that when i take pictures with my new iphone 4s rotationally they look fine but when i try to download them onto my computer or email them to others they come out upside down or sideways. how can i fix it or is it an OS issue?
I have iPad 2 and I am having same problem since I updated to iOS 5. All we can do it is rotate it from computer
-
I am in Muse 2014.3. When I edit a page, in the preview everything looks fine, but when I upload it to FTP, the page does not change, even when I upload the whole site. Is this a bug? I don't know what to do.
Hi Jaap,
Are you sure about your FTP credentials (FTP folder and site URL) that you are using for the upload? Are you able to see the updated files in the remote directory of the FTP server, after you finish uploading the muse file, using an external FTP client like FileZilla?
Thanks
-Prashanth -
I want to upgrade the software (currently I have Mac OS X 10.6.4) but when the mac is downloading the new version i get an error message and is not possible get the most updated software: Mac OS X 10.6.8 or either the most recent itunes why?!?!?!
Then you either have a network problem or a hardware problem or a corrupted hard drive. You might try:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
You can also try downloading from another computer on a different network connection. -
running windows 7 with plenty of memory.when i use the smart brush program is fine but when i start to use detail smart brush program shuts down,PLEASE ADVISE what corrective actions need done
thank youYou should post that on the Boot Camp forum, that is where all the Boot Camp and Windows guys hang out.
Good luck. -
Just installed windows 7 Ultimate using Boot Camp. Problem is when I choose to boot the windows partition, I get the windows icon on the screen showing that it is starting, but few second after, I get a blank screen. I suspect a driver (screen) issue, since I also installed Parallell using the boot camp partition and that works fine.
Do anybody out there has an ideal of what to do to solve this issue.
Thanks
Pierre317Hi Pierre,
more tips can be found here ...
Maybe you are looking for
-
the following install error :Your new directory server has been started.Created new Directory Server Start Slapd Starting Slapd server configuration.ERROR: Ldap authentication failed for url ldap://serverjfsun.software.centellki) Fatal Slapd Did not
-
A question regarding authorisation policies in OIM 11g
Hi, I went through the list of OOTB Authorization policies in OIM 11g, just to know what all permissions were given to the 'ALL USERS' role which will be assigned to any OIM user by default. Below two policies are of a bit confusion to me. It would b
-
Problem declaring and using a REF CURSOR
I'm having a real problem using a REF CURSOR type Here's the DECLARE and the start of the BEGIN I've so far developed. DECLARE TYPE r1 IS RECORD ( szvcapc_pidm szvcapc.szvcapc_pidm%TYPE, szvcapc_term_code szvcapc.szvcapc_term_code%TYPE, szvcapc_reque
-
How to export annotations in acrobat professional 10?
is there any way to export annotations in acrobat professional 10? This feature was there in acrobat 9. Please do reply ...Its urgent.
-
Facebook photo upload from Iphoto
Hi, am trying to upload some photos from iphoto onto fb, but for the 1st time it is telling me I need Iphoto 5. I am not computer savvy and don't know how to do this. Please help.