Updated Report Selection Criteria doesn't show in Publication

Hi,
This is my first post in this forum and I'm relatively new to Crystal Reports Server.
We have Crystal Reports Server 2008 V1 SP3.
I have two independent reports that I've put together in a report publication. The report is saved to the file system.
I made a change to one of the report's selection criteria. I viewed the report thru the Crystal Reports Program and Infoview/CMC to confirm the additional records I wanted showing were showing. They were and everything worked.
A week went by and I noticed that the saved report didn't have the additional records.
I've contacted SAP support and we were able to get everything working by doing the following
1) Remove the updated report from the publication's Source Documents list. Save and Close
2) Re-add the report to the publication's Source Documents list.
3) Delete the old recurring schedule (so we don't have two instances doing the same thing).
4) Re-create a new schedule for the delivery (not reschedule and replace an existing nor reschedule and create new, but a brand new one).
These changes were compounded by the fact that I had 4 different scheduled instances, each with a different parameters, so these 4 steps were actually closer to 8.
In my own testing I was able to confirm something similar happens with a single report (not part of a publication) when you change the selection criteria. I had to create a new scheduled delivery in order to get the selection criteria change to flow thru.
My questions to all you is
Is there some other way to distribute 2 reports in way that making a change the criteria of the report doesn't require doing anything else?
Thanks.
Edited by: David Steven on Feb 13, 2012 9:58 PM

Hi RobbinsFam!
Here is an article that describes the issue you are seeing, and can provide you with some helpful troubleshooting steps:
iOS: Unable to import photos to computer
http://support.apple.com/kb/ts3195
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

Similar Messages

PS report: multible selection for report selection criteria

Is there a possibility to define multible selections in the report selection variables of a PS hierarchy report?
I tried to define them via
CJE6 -> EDIT -> General data selction
and entered valiables in the FROM column and the TO column. But when I execute the report it will not show multible selction, but only single selection. Also, I did not find a SAP standard report which has multible selection in the report selection criteria screen.
I found the multible selections only in the DB profile selection screen and the dynamic selection, but that is not the solution I am searching for.
Can anybody kindly help me with this?

E.g. S_ALR_87013532
here you can see multible selection in the DB profile selection group, but not in the report selection group. I would like to use multible selection in the report selection group, as mentioned above.
I am aware of the possibility of creating a new DB profile, but this is only my option B.

Create choose from list in Report selection criteria

Hi all,
Is it possible to create a choose from list in UDF in a Report selection criteria ?
My issue is i just want to create a report using crystal report. In this report contain some parameter which the parameter choose from list value is come from a UDT. If the value come from OCRD or OITM , it's so easy to make. I just make Customer @From OCRD in parameter CR, then i just preview, it will make choose from list from business partner. But how about from UDT.
I have try to make it using Formatted search. So in SAP B1, i binded with formatted search in some parameter that i make it in CR. But there is some thing odd. if I make 2 different report with different parameter. The formatted search with binded in the first report, will also binded in the second report. And i don't want this happen.
How can i make it , the formatted search didn't binded in second report parameter, because the second report is totally different. ?
thanks in advance
regards
Jia shun

Hi Jia
Try this
@UDT
     Code          Alpha(8)
     Name          Alphe(30)
     Fields      etc
Define the parameter token as follows.
Season@SELECT DISTINCT T1.Code, T1.Name FROM OADM T0 CROSS JOIN "@UDT" T1
OADM only has one record so the join will return the right number of records.
Hope this helps
Rob

Where is define Templates in Profit Center Report - Selection Criteria

Hello Experts,
where is define Templates in Profit Center Report - Selection Criteria Window ?
Dixit Patel

Define Templates in
Financials ->Cost Accounting -> Cost Centre Hierarchy

Help with selecting 10 random records from all records meeting report selection criteria in Crystal 11

I am trying to select ten random records from all that match the report selection criteria then report on each of these random records for QA/QI. I have tried the RND function however it is giving me a random number rather than a random record selection. I cannot figure this out and am despirately seeking assistance.Thank you,Amy

I don't know of any Random record selection functions but maybe you could write your own custom function inside of a record selection to randomly filter the records. You would use the Rand function we currently have to decide if a record was included in the report data or not.Another possible option is to filter the records before they get to the report. You can only do this if you are pushing the data into the report instead of having the report pull the data. An example of this would be passing an ado recordset to a report at runtime. Rob Hornehttp://diamond.businessobjects.com/blog/10

MSS - reporting - selection criteria - translation

Hi
The selection criteria iView
( com.sap.pct.hcm.rpt_objectselection )
has two drop down lists fields:
1) reporting period
2) limitation (all employees, directly subordinate
employees etc)
I need to translate them to french.
If I inlcude the iView in my translation list I see
the reporting period object as:
Selection period values
(0=today, 1=current year, 2=current month,
3=all, 4=past, 5=future, 6=key date, 7=other period)
which I can translate without problem.
but i do not see the object for the limitation.
Any help appreciated.
Thanx
Paul

Paul,
I think you need to do them in R/3. Lok at table V_TWPC_V & V_TWPC_VC (customer view of V_TWPC_V) this is where codes for All Employees etc and the texts are held.
thanks,
Paul

Description change in query report selection criteria

I created a query report with certain criteria but in that i suppose to change the description .
for example
Posting date greater than
Posting date lesser than
but i need this selection criteria
as
Posting date from
Posting date to
regards
kavitha

Hi Kavitha,
Unfortunately, it is not possible to change the system field description.
Refer to this thread
Re: Parameter Display Name Reg.
Regards,
Vijay Kumar
SAP Business One Forums Team

After updating mountain lion it doesn't show mountain pic ?

after updating when i check about this mac it doesn't show any Lion pic..
is this ok or i need to do something else..

There won't be any picture under "About this Mac..." just the OS X version, etc.
Clinton

Ageing report selection criteria

Hello Solution Management,
It is sometimes necessary to select only a special range of suppliers or customers.
This could be achieved by selecting a range of groups or excluding a groupe or a range of group in the selection criteria.
this criteria would be similar to those in the stock posting list seletion criteria, BP tab for the range of group and on the tab by warehouse . The difference would be that instead of being warehouses it would be BP groups.
KR/MFG/Bivacha
Murielle

Hello Marta,
This is system default function. It is hard coded already. You could print this page on the virtual printer instead.
Check this thread to have more info:
Suppress Printing of Selection Criteria page
Thanks,
Gordon

I can't watch movies, it is asking for latest adobe flash. After updating adobe flash still doesn't show movies.

I can't watch movies , asking for adobe flash. After installing the latest adobe flash still doesn't show movies.

The other day, there was someone here who figured after quite a while that he had plug-ins disabled in Safari. He could have installed Flash a hundred times but never get it to work.
Of course, you do have plug-ins enabled. Yes? Quick double-check? Safari -> Preferences -> Security tab -> checkmark at "Enable plug-ins"...

Update an existing bug doesn't show the new test run "steps to reproduce" in TFS

Hello all...
So let's say I have a bug. Then I run a new test because I've been told it's fixed. This second test fails. I choose "Update an Existing Bug" and I'm presented with the window that looks like I'm reporting a new bug - all the info is there. I save
and close, go into TFS, refresh...and I all I see is the original bug that I reported, but none of the new stuff I just did. Where is that new stuff? I would expect it to push the old stuff down, and the new stuff I'd see above. My developers get mad at me
because I've moved their tasks back to "To Do" but they see the old bug and complain that it's fixed, even though I have new info to report, they don't see it. I'm in VS/MTM 2012 V4...
Thank you for your help!

Hi OneOfThreeDevs,
As you said that you did not see the new bug report in TFS after you
reporting a new bug - all the info by choosing "Update an Existing Bug" option in test runner.
I suggest you need to check if you can see the new bug report by selecting
Testing Center->Test->Verify
Bugs.
(1)If you could not see the
new bug report in the bugs list, I doubt that you may be not update an Existing Bug successfully.
Therefore, I suggest you can refer the following link to create a new bug report by the update an Existing Bug.
Reference:
http://msdn.microsoft.com/en-us/library/vstudio/dd465175(v=vs.110).aspx
(2)If you could see the new bug report in the bugs list, I suggest you can try to input the bug ID in Team Explorer Windows and then
check this issue again.
In addition, you can try to see the new bug report by the web access.
Reference:
http://msdn.microsoft.com/en-us/library/ee523998(v=vs.110).aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Match code in report selection screen does not show any values for 0FISCPER

Hi Experts,
I have problem with selection screen in several reports. When I use match code for fiscal period selection I get only # as a possible value. I have checked the master data they seem to be correct. I work with 7.0 BW system. Can you please give me any hint what I should check?
Thank you,
Michal

Hi,
maybe I ask different way - how do you add characteristic values for a characteristic in the BEx? Is it automated somehow in SAP (e.g. from master data)? For the fiscal period I use custommer exit to fill in the default value, which is the current fiscal period. But this is something different, right?
<removed by moderator>
Michal
Edited by: Arun Varadarajan on Nov 14, 2008 3:55 PM

HT5362 How do I turn off notifications for Software Updates? 'App Store' doesn't show in the list of notification apps. I want the background checks for updates, just not the notifications.

How do I turn off notifications for Software Updates?
In the 'Notifications' section of the 'System Preferences' app, there is no tab for managing the notifications of System Updates nor App Store.
Hey--- I like auto-checking for updates, and hey--- I like auto-downloading them in the background.
BUT I do not like being notified of updates in the middle of working! Especially when it's iTunes updates. Grrrr.
Any chance this is easy and I just missed it?
THANKS COMMUNITY!

Settings > Notification Center > Mail > Select the mail account (if more than one) > Alert Sound > None

SAP Crystal Reports 2011/2013 doesn't show Company Data Base

I have CR versions 2011 and 2013 in several clients, and I can't connect to SAP B1 through the integration component. The behavior is that when I fill all the fields, I can't see the Company DataBases; if I type it manually and click "finish" I get the "conexion failed" error. With version 2011 it was working and then stoped working just like that. With 2013 has never worked. I've read in several forums that this error is recognized by SAP since early 2008 versions, but only talk about future "fixes". I've checked if any fix for 2013 is available but no lucky, it seems that fixes is a mess with CR.
See screenshot. Any ideas how to fix this? is this really a bug?
I have SAP 9 PL 9.
UPDATE: My SAP Partner Support has told me this error is caused by the version of SQL I have (which is 2012) and that SAP will release a patch to correct this soon, is this correct?

Hi,
Please check SAP note:
1966132 - SAP Business One 9.0 PL09 (SQL & HANA) supports SAP Crystal Reports 2013, version for the SAP Business One application
Thanks & Regards,
Nagarajan

Office Updates Version 16.x doesn't show up

Hi all,
I am part of the Office Pre-Release Program for Business and so forth I should have received the latest update of Office 2013 (16.0.3823.1010). I have also automatic updates enabled. No such version listed in my options nor by forcing the update.
Note: I received a confirmation email by the Office Team that this version should be available to my organization during the past few days.
Has anybody got it updated to this version yet? Do I need to be more patient!
Thanks in advance for any thoughts or help.
Kal
Director of Technology
Washington, DC - USA

No Office 2013 latest update...
My actual version is 15.0.4701.1002
Office 2016 is in preview I am talking about the latest update for Office 365 ProPlus.
Yesterday, I received an email from MSFT regarding an updated release for Office 365 v16.0.3832.1010 as part of the Office Pre-Release Program for Business. The email stated that the update should have automatically streamed down to my machine in the last
few days.
This sounds almost exactly like what you're describing.
The thing is, that I'm running the Office2016 preview on a different machine, but, I guess this is information that only *I* would know.
So, I think the matter of your situation is that you have registered at some point for the Office2016 preview, but, that' doesn't mean that Office v15 machines will automatically update to Office v16 - you need to download and install the necessary
Office v16 first, and then that will auto-update via streaming to the relevant Office v16 update.
So, any machine which has Office v15 will not auto-update to Office v16, during the Pre-Release/Preview period.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Updated Report Selection Criteria doesn't show in Publication

Similar Messages

Maybe you are looking for