Updated Software FIOS App Won't Change Channels

Since the software was updated a few days ago, the myfios app on my ipad doesn't properly change channels. For example, if I select "watch on TV" for channel 622, it might go to channel 62 or a completely random channel. This feature was working perfectly before the update. I rebooted the media server/DVR, I updated the app to the latest version and did a hard restart on the iPad, but it's still not changing channels properly. C'mon guys, this was a very handy feature! Please advise.

I have the exact same problem as of a few weeks ago. Incredibly annoying...

Similar Messages

  • Safari, Software Update and Mail apps won't connect

    Safari, Software Update and Mail apps won't connect to the Internet. Software Update fails with a suggestion of running Network Diagnostic. Network diagnostic says everything is fine. Firefox connects without any problems. Any ideas. This is my work computer and I need it to work.
    Chris

    Fixed it myself. Under network settings "Auto Proxy Discovery" was enabled. When I turned this off everything started working again. Not sure how this was enabled in the first place.

  • My apps won't update and new apps won't download..help?

    I have ipad with retina display and my apps won't update and new apps won't download

    Is your iPad restricted?
    Check Settings > General > Restrictions

  • HT3702 i have updated my billing information and still can't update the existing Apps. I changed the credit card and still same problem

    I have updated my billing information and still can't update my existing apps , i ahve changed the payment card and still same problem ,what shall i do ?

    It's a credit card, not a debit card ? As far as I know that message will show if you are trying to use a card that was not issued by a bank in the same country as where your iTunes account is based (and you need to be in that country). If you are sure that it is then you could try contacting iTunes Support and see if they can help : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Some programs do not run: update software, mac App Store, Calendar, ibooks.V the same time, the program iTunes, iPhoto and other work normally. What to do?

    Some programs do not run: update software, mac App Store, Calendar, ibooks.V the same time, the program iTunes, iPhoto and other work normally. What to do?

    Hello JohnnyChin95,
    You absolutely can just reinstall OS X Mavericks without having to erase and install. The steps to do that are almost the same as the only thing you do differently is that you do not go to Disk Utility to erase the drive. Just go to the Reinstall OS X option and pick your Hard Drive and follow the on screen instructions to get it going. Check out the article below for the step by step process. 
    OS X Mavericks: Reinstall OS X
    http://support.apple.com/kb/PH13871
    Regards,
    -Norm G.  

  • When updating software in app store automatically uses my partners apple ID

    Hi,
    Using a mini-Mac which has always been personalised to my apple ID, my girlfriend has a macbook air and iPhone. Somehow when I want to install software update it populates the apple ID with my girlfirends username, not mine?! The system appears to have my ID logged in and iTunes is using mine....it won't let m change it either.

    Launch the App store application. On the right side of the Panel, you will find 'Quick Links.'  The first line will read either 'Welcom xxxxx' or 'Sign In' Select that and Sign in to the correct App Store account.
    You will now have to verify that the Software has been bought for your account or not. If not, you have to 'repurchase,' if you are not in a 'Family Share'. If you are in a 'Family Share' it will provide the option under 'Purchased' to update software from your 'Family'
    Have fun
    Leo

  • Since updated software YouTube videos won't play

    Why won't iPad play you tube videos since I updated software and how do I fix it?

    Try a Restart.
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
    Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
    Here is a link to their contacts with most of the information below.
    http://www.apple.com/contact/

  • Can't update software through app store, since Feb. Says no updates available. Error says server with specified hostname not available.

    Can't update any software or apps through appstore. Updated Itunes after several months by download, install. Using my own Macbook on my network, never had this problem. Re-installed Mountain Lion. Removed file softwareupdate.plist from Library preferences. Repaired disks and permissions. Any ideas?  seems like a small issue, but this is pretty serious going forward.

    Please test after each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes. Keep in mind that no one here represents Apple or can help with customer-service issues.
    Step 1
    A purchased app can only be updated by signing in to the App Store with the same Apple ID that was originally used to buy it. There's no way around that limitation, which also applies to free apps. If you can't sign in with the buyer's ID, delete the app and reinstall it. You'll have to pay for it again, if applicable.
    Step 2
    From the App Store menu bar, select
    Store ▹ View My Account
    Enter your Apple ID password at the prompt. At the lower right corner of the window that opens, click the Reset button. Close the window.

  • After my company changed the e-mail address, I had to change my Apple-ID. How do I update my purchased Apps after the change?

    The renamed Apple ID does not update all the Apps but comes up with the old AppleID, but that ID is not there anymore and neither the old or the new password is working
    On the FAQ pages I just find a long list of Apps, stores tc. that I have to update, but no explanation on how to do that.
    I do not want to buy all the apps again just because I had to change the e-mail address and because of that the AppleID.
    It is ok to remove the free ones and load them again, but the paid one?
    How is Apple handling such things?

    OK, after reading other and similar threads too, I found a solution myself.
    Thought to share it.
    On my iPhone, after the change was made at the AppleID site, I had to logoff from the old AppleID and then to relogon with the new/changed one. After that I could update all apps again

  • Can't update software, iTunes songs won't transfer

    I have an older docked iPod (2nd gen, I think). It is running iPod software 2.2. I updated iTunes to the latest version and now my recently downloaded iTunes songs won't transfer to the iPod. I get an error message saying my iPod software is outdated. But I can't get the latest iPod update software to load. I've downloaded it twice now. When I go through the installation program, it shows me the possible destination volumes for the software -- either my iPod or my hard drive. The iPod has a red X next to it, with an error message saying the software can't be installed on a volume that doesn't have OS X 2.8 or higher on it (my Mac is running OS X 10.3.9). If I try to install the iPod software on the hard drive, everything is grayed out and says disabled. I don't know what to do next. How do I update the software so I can transfer my new playlists? Should I downgrade iTunes back to its previous version (if this is even possible?)? Help! Thanks!!

    I have an older docked iPod (2nd gen, I think). It is running iPod software 2.2. I updated iTunes to the latest version and now my recently downloaded iTunes songs won't transfer to the iPod. I get an error message saying my iPod software is outdated. But I can't get the latest iPod update software to load. I've downloaded it twice now. When I go through the installation program, it shows me the possible destination volumes for the software -- either my iPod or my hard drive. The iPod has a red X next to it, with an error message saying the software can't be installed on a volume that doesn't have OS X 2.8 or higher on it (my Mac is running OS X 10.3.9). If I try to install the iPod software on the hard drive, everything is grayed out and says disabled. I don't know what to do next. How do I update the software so I can transfer my new playlists? Should I downgrade iTunes back to its previous version (if this is even possible?)? Help! Thanks!!

  • Trouble  updating software from  app store

    I am  getting an error message (error 100) every tie I  try to update  my software updates from the app store.   What is the problem and what do I need to do?

    Many folks are getting these errors. Tel Apple and perhaps they will fix it.
    http://www.apple.com/feedback/macosx.html

  • Updating software via App Store

    When I try to update software through the App Store application it automatically populates the Apple ID with a previous owner for my computer. It will not allow me to enter in my apple ID. How do I remove the previous owner's information from my computer?

    You'll need to use the Recovery system and use Disk Uitlity found on the start screen of the Recovery system, Mac OS X Utilities screen, to repartition the drive as one partition and then reinstall Mac OS X clean and fresh.
    Whatever apps are now on that system aren't yours. They are the previous owners and can't be transferred to you.

  • DVR sometimes won't change channels automatically to record a show

    Last  night I turned on my TV and a FIOS message was there indicating a user action was required.  I needed to select 'record both shows' in order for the DVR to change channels on the second tuner to record an hour long show that was already 35 minutes in.  The DVR should have recorded the two shows in the schedule without intervention.
    Model number:  Motorola QIP 7232 2
    Does anyone know why this happened or is there a setting that needs to now be set?

    This is how Verizon set up their system. It is absolutely asinine. As is the fact Verizon uses show titles to record as opposed to time like Cox cable. The result is you lose the last couple of minutes on ABC when they run their 9:02 to 10:02 schedule And in many cases I cannot record with an extended time because I already have 2 channels scheduled. On the other hand, Cox cable uses time.
    My other issue is, and I am wondering if it is just my service, now that Verizon has gone to this new guide, it takes my set top box over 45 seconds to switch functions. Most of the time things don't delete, some shows take 2 recordings even though it was automatically recording, and more times than not, I lose the last few seconds of the recordings. And I am also getting numerous times where I lose either audio or the picture freezes.
    Hopefully someone at Verizon reads these comments else we are just complaining to each other.

  • Updating and installing apps won't install after update to R29

    Hi all,
    You can't update an existing app in Adobe DPS App Builder and install it.
    You need to create a new app each time. This is to time consuming.
    Anyone else noticed this?
    regards
    Mario

    We think we’ve located the problem. It could be the actual signing when you download the ipa frop DPS Builder.
    we’ve unpacked the ipa
    Removed the CodeSignatures folder
    And signed it again manually using Terminal
    Zipped it all back to an ipa
    And we successfully installed the ipa using iTunes.
    So therefore, we think this might be a signing issue in the Adobe DPS App Builder

  • Upgraded Iphone software and apps won't load

    I updated by Iphone software to the latest version last week and now none of my applications will load onto the iphone, i have tried deleting the applications and getting them again from the I-Tunes store but this doesn't work either... can any one please help me??

    Hmmm sorry pal, I think you may be stuffed. I have had the same problem with some of my apps, that don't seem to work anymore ie they load, but then just crash out.

Maybe you are looking for

  • BPEL calling EJB 3.0 - EclipseLink error

    I have an 11g BPEL process calling an EJB 3.0 method. It looks like the payload has been formatted correctly, but it is throwing an exception: Exception [EclipseLink-70] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.

  • External keyboard and display not recognized

    After upgrading to Leopard, Vista doesn't see my external keyboard and display. Any ideas?

  • Quicktime Player in Snow Leopard cannot download Apple HD Trailers

    Hi! I've had this same problem since couple of months ago I bought this MBP 17". I cannot watch the movie trailers from Apple. They download normally the first 45seconds (1/4 movie) or so, but then it completely stalls. The download rate drops dramat

  • Oracle Business Intelligence Essbase Cube Builder

    hi does any one prior exp on Oracle Business Intelligence Essbase Cube Builder or can any one tell me whats the use of it and how does it work with essbase ?

  • Harddrive for 2006 macbook pro

    I have a Spring 2006 15"MBP and the harddrive is starting to go. The wheel of death is having a ball. Any suggestions out there where I can find a replacement hard drive?