Updated software - No screen Display

Ipod 30g 5th Gen
I recently bought a new PC, updated my sofware to 7.11 . after installation I updated the Ipod softeware - Ever since then I have NO screen display, My ipod was not dropped , kicked or abused !!!
After following the usual steps as posted all over the website ( with no success ) I tried to reinstall my original software with no success ( somehow Itunes 6 recognises that there was 7 installed and will not load )
When I restore the ipod software the screen works fine during installation then goes blank after installation.
The sound , clicker etc all work - just no screen display
CAN ANYONE HELP ME BEFORE I KICK THE DOG !

try to re-install power management, update graphic card drivers and flash bios update if there's new available.
http://consumersupport.lenovo.com/uk/en/DriversDow​nloads/drivers_list.aspx?CategoryID=42

Similar Messages

  • I have iPhone 4 with updated software and screen is too sensitive?

    I updated my iPhone 4 recently and now everytimee I'm on the phone MY EAR OR HAIR LAUNCHES FACETIME or hangs up. 

    If your router is not identified in a national database (don't recall who maintains it or where it is) then there is no location associated with it.  Hence your device cannot be located.  I suggest you try your test at some public wifi spot, like a bookstore or coffee shop.  These places usually have a location associated with their wifi router.

  • My iphone 5S is stuck on a screen displaying the itunes symbol and a charging cable. I tried connecting it to itunes and updating it to the new software, and backing it up but it keeps saying unknown error 4005, Also when I first tried backing up my

    My iphone 5S is stuck on a screen displaying the itunes symbol and a charging cable. I tried connecting it to itunes and updating it to the new software, and backing it up but it keeps saying unknown error 4005, Also when I first tried backing up my phone on my computer it would begin the processes then half way through it would say IPHONE has been disconnected, now it won't recognize it or anything. what can i do? This is a brand new phone!!!

    Hello jraff21,
    I was able to locate a support article for the error you mentioned. The following steps may help you get your device back to working order:
    iOS: Restore errors 4005, 4013, and 4014 - Apple Support
    You may see one of these messages if the device unexpectedly disconnects during the update or restore or iTunes couldn't tell the device to go to the restore state.
    The iPhone [device name] could not be restored. An unknown error occurred (4005).
    The iPhone [device name] could not be restored. An unknown error occurred (4013).
    The iPhone [device name] could not be restored. An unknown error occurred (4014).
    Try these steps to resolve the issue:
    Install the latest version of iTunes.
    Restart your computer.
    Make sure your computer is up to date. If an update requires a restart, check for updates again after you restart.
    Restore using another USB cable.
    Learn more about updating OS X.
    Learn more about updating Windows.
    Restore your device on another computer.
    If you continue to see error 4005, 4013, or 4014 when you restore your device,contact Apple for support.
    Learn more about other update and restore errors.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Updated software recently - now my mac book displays a grey screen

    Hi
    I updated software on my mac book pro around a couple of hours back. I followed all the steps during the process. Now for the past two hours, my macbook pro shows a grey screen with two buttons for signing in as me or signing in as someone else- but these buttons are not clickable - in that, nothing happens when I click the buttons - How can I resolve this issue - I have been quite happy with the mac book otherwise

    Hi mk101!
    I have an article for you that can help you troubleshoot the startup issues you seem to be experiencing. The article can be found right here:
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck
    http://support.apple.com/kb/ts1417
    Specifically, this section outlines the first step that you will want to try:
    Resolution
    Try a Safe Boot
    If you're using Mac OS X 10.2 or later, you can start up your computer in Safe Mode, which includes an automatic disk check and repair. If you're using Mac OS X 10.1.5 or earlier, skip to the next section. A Safe Boot, which starts up your computer into Safe Mode, may allow you to start up your computer successfully using a reduced version of the system software. To do this, follow these steps:
    Start up in Safe Mode.
    After the system has fully started up, restart your computer again normally.
    If the computer successfully restarts, you do not need to do any more troubleshooting. If the issue persists, try Disk Utility.
    As it says, if the issues persist, you need to continue with the troubleshooting steps found in that article. Hope that helps, thanks for using the Apple Support Communities!
    Regards,
    Braden

  • Since updating Iphone 4 the screen display is too large

    Since updating my Iphone 4 the screen display is too large to fit on the screen. For example the green battery graphic is so large half of it takes up the full screen.
    I pressed restore and restored the phone. I then restored my backup files and I still have the same problem.
    Does anyone have any suggestions?

    This is asked and answered many,many times and is covered in the manual ( Zoom feature).
    iPhone User Guide (For iOS 4.2 and 4.3 Software)
    Double tap with three fingers

  • HT4623 I have a iphone 4 ,version 4.3(8F190), When I click to General settings -there is no software update sign shown .It displays About,Usage, Network etc etc software update is missing

    I have a iphone 4 ,version 4.3(8F190), When I click to General settings -there is no software update sign shown .It displays About,Usage, Network etc etc software update is missing.Need help guys! Operating system is 04.10.01(Modem Firmware)

    You have to update through iTunes on your computer.
    See the chart below to determine whether you can upgrade your device and what you can upgrade to.
    IPhone, iPod Touch, and iPad iOS Compatibility Chart
         Device                                       iOS Verson
    iPhone 1                                      iOS 3.1.3
    iPhone 3G                                   iOS 4.2.1
    iPhone 3GS                                 iOS 6.1
    iPhone 4                                      iOS 6.1
    iPhone 4S                                    iOS 6.1
    iPhone 5                                      iOS 6.1
    iPod Touch 1                               iOS 3.1.3
    iPod Touch 2                               iOS 4.2.1
    iPod Touch 3                               iOS 5.1.1
    iPod Touch 4                               iOS 6.1
    iPod Touch 5                               iOS 6.1
    iPad 1                                          iOS 5.1.1
    iPad 2                                          iOS 6.1
    iPad 3                                          iOS 6.1
    iPad 4                                          iOS 6.1
    iPad Mini                                     iOS 6.1
    Select the method most appropriate for your situation.
    Upgrading iOS
       1. How to update your iPhone, iPad, or iPod Touch
       2. iPhone Support
       3. iPod Touch Support
       4. iPad Support
         a. Updating Your iOS to Version 6.0.x from iOS 5
              Tap Settings > General > Software Update
         If an update is available there will be an active Update button. If you are current,
         then you will see a gray screen with a message saying your are up to date.
         b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
         c. Resolving update problems
            1. iOS - Unable to update or restore
            2. iOS- Resolving update and restore alert messages

  • TS3623 purchasing a movie from apple tv has stopped working.  I click on "movies" and it takes me back to the same screen instead of the movies available.  I have updated software, unplugged the modem & apple tv box, & the tv; Netflix still works!

    purchasing a movie from apple tv has stopped working.  I click on "movies" and it takes me back to the same screen instead of the movies available.  I have updated software, unplugged the modem & apple tv box, & the tv; Netflix still works!

    Welcome to the Apple Community.
    First you should try logging out of your iTunes Store account (settings > iTunes Store > accounts) and then back in again.
    If that doesn't help, try resetting the Apple TV (Settings > General > Reset > Reset all settings). You should also try restarting your router.
    If both of the above don't help, you should try a restore (Settings > General > Reset > Restore).

  • I was updating software and suddenly my IPHONE  started asking for I tunes on mobile screen ,  how can  i  get by screen back or How i can restore without loosing data , I m more worried about data , Please help in resolutio

    i was updating software and suddenly my IPHONE  started asking for I tunes on mobile screen ,  how can  i  get by screen back or How i can restore without loosing data , I m more worried about data , Please help in resolutio

    What exactly are you seeing on the phone's screen ? If the iTunes icon and cable then the phone is in recovery mode, in which case it's too late to take a new backup or to copy any content off the phone - you will have to connect the phone to your computer's iTunes and reset it back to factory defaults, after which you can restore to the last backup that you took or just resync your content to it

  • I have updated my Iphone5 with new IOS6 - now the screen/display does not react to my taps on screen as in i cant tap in my pin to start???

    I have updated my Iphone5 with new IOS6 - now the screen/display does not react to my taps on screen as in i cant tap in my pin to startup???

    I have updated my Iphone5 with new IOS6 - now the screen/display does not react to my taps on screen as in i cant tap in my pin to startup???

  • Hi, I have just tried to update the iPhone software and it appears to be updating but the screen on my phone has had the same picture of the apple and its at the same spot of loading (about 3 quarters) for the last HOUR!! help!

    Hi, I have just tried to update the iPhone software and it appears to be updating but the screen on my phone has had the same picture of the apple and its at the same spot of loading (about 3 quarters) for the last HOUR!! help!

    oh and the device is not being recognised by itunes now either.

  • HT4623 why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

    why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

    You are in Recovery Mode. Follow the instructions below to recover your iPad.
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
    5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

  • Since the iOS 7.0.2 update, my iPad retina display is now experiencing white blurred screen, can you help me from this?

    Since the iOS 7.0.2 update, my iPad retina display is now experiencing white blurred screen, can you help me from this?

    Restore the device via iTunes on the computer.

  • Tried to update software now phone has itunes logo on screen and ont do anything

    got mesage asking to update software now phone has itunes logo on screen and wont do any thing else on i tunes say device not found

    http://support.apple.com/kb/HT1808

  • Immediately after updating Acrobat Pro XI to the latest version, the software no longer displays imags in pdf docs.

    Immediately after updating Acrobat Pro XI to the latest version, the software no longer displays images in pdf docs.  All the boxes where images are supposed to be are solid grey.  Old documents that worked are no longer displayed correctly and new documents I make do not display images.  All grey boxes.  Worked fine before the update.  Suggestions?

    Hi precious_star,
    Could you please let me know what version of OS are you using.
    Open Acrobat and go to "Edit > Preferences > Page Display" and check whether 'Show large images' option is checked.
    Is this issue specific for one PDF?
    If possible, please share the file with me via email so that I can also check at my end.
    I have sent you a message with my contact id details.
    Hope to get your response.
    Regards,
    Anubha

  • HT1600 update Apple TV via settings general update software advise Apple support.  But Airplay won't display the Apple Tv because it needs an updated compatible software. Catch 22. How does one resolve this contradiction please? Paul

    update Apple TV via settings>general>update software advise Apple support.  But Airplay won't display the Apple Tv because it needs an updated compatible software. Catch 22. How does one resolve this contradiction please? Paul

    only the following macs support airplay mirror
    http://support.apple.com/kb/ht5404

Maybe you are looking for

  • Oracle XE and character set

    Hello all, I installed Oracle XE on RHEL 4 Linux and I found out that database character set is AL32UTF8. Does anyone know why oracle choose this character set? Maybe because of NLS_LANG env variable? Is it possible to change it to EE8ISO8859P2? Sinc

  • CS 5.5 Export - Error Compiling Movie - Unknown Error

    I am running CS 5.5 and every time I export in Premiere or in Media Encoder - I get this message: Error Compiling Movie - Unknown Error I have tracked it down to a video clip with alpha channel. I have some animated overlays - If I turn off this laye

  • How can a standalone App subscribing messages

    I've configured a JMS message publisher and a message subscriber, and run them both in the same machine with J2EE Server running and everything works fine. Now I need to use a standalone app client in a diferent machine to subscribe messages publishe

  • Variables for E2E Summary View (SSR Workload)

    Hi there, I have installed the Solution Manager Diagnostics and the Diagnostics Agent on the Solution Manager. If I choose the Solution Manager and open the Workload Analysis there are no informations. When I go to the "Workload Summary" there appear

  • Hard drive defect message

    When checking the drive before installing Mavericks it gave the message error on 4HDD/11/40000000.SATA(0,0). I then used disc repair to fix it and then installed Mavericks. Will there be further problems down the road with this message. Do I need to