Updated to 10.4.8 and fan will not stop running

Ran the 10.4.8 update on my 1.25 G4 powerbook and it worked fine. Ran the update on my my 1.42 GHz G4 mac mini and the fan has not stopped running once. The fan hardy ever came on before. Any one else have this problem?
what can i do to solve this?
mac mini + power book   Mac OS X (10.4.8)  

Yep, have a Macbook Pro 1.83 Ghz (week 15) with 2GB SDRAM. Since 10.4.8 I have been experiencing the same issue. As somebody else descibed it on this site its alike a spinning wheel sound on a bicycle. Recently Apple have been messing around alot causing problems with networking and CaptureOne and so on. Hope they get their act together soon.
MacBook Pro 1.83 Ghz   Mac OS X (10.4.8)  

Similar Messages

  • HT1446 my battery on macbook pro will not charge, light doesn't show on connector (but works with my partners mac) and fan will not stop running.

    Help please...fan won't stop running and battery just has a cross through it on screen. Connector does not light up,

    ry resetting the SMC:
    SMC
    http://support.apple.com/kb/ht3964
    If you look at the battery in System Info, does it show as ok?

  • Imac fan will not stop running after power outage .

    unpluuged after we lost power . now the fan runs constantly.

    If you note that your Mac fans don't work correctly, do a SMC reset > http://support.apple.com/kb/HT3964

  • I bought a ibook G4 2005 refur-ed it is making a fan running noise when I listen to sample music on line and it will not stop until I reboot.. What could that be also bottom of computer very hot?

    I bought a ibook G4 2005 refur-ed it is making a fan running noise when I listen to sample music on line and it will not stop until I reboot.. What could that be also bottom of computer very hot?

    When my iBook got hot like that, I would take a break and let it cool down.
    You can buy laptop desks that have USB powered fans on them, such as the Targus Chill Mat.

  • Updated to Windows 8.1 and ITunes will not recognize the nano 6th generatio IPod

    Updated to Windows 8.1 and ITunes will not recognize the nano 6th geneartion IPod. I tried all the things that was listed on troubleshooting. Help

    Did you ever get help for this? I use the radio feature often and now it will not play, since updating to Windows 8.1.

  • Dock icons will not stop running

    The icons on my dock will not stop running. They have the small blue light under them when in use but the light does not go off when I close the program. I have been quitting them by holding down the curser on the icon until menu comes up to quit. Help, please. Thanks, Arudi

    yup. bizarre. logged out of MobileMe and I try to move the Keychain Icon from the third on the left to the last on the right and -whoooo-oop - it slides back to the left. no fun. like having a gremlin moving books around in my library or something...

  • Sound Test will not stop running

    I have a sound bar hooked into my desktop tower using the front headphone jack.  I tried to run a sound test on it and the sound test worked.  Now, the sound test will not stop running.  Every time I turn on the sound bar, I get the annoying, electronic siren noise.  How do I stop this and return the sound bar to its functioning state?

    Thanks. Lease see the attached link http://support.apple.com/kb/ht4097#
    Click on the 'more' link near the beginning as this may be crucial in your case. Also note the very last paragraph regarding the computer!

  • I have tried to download the update for itunes several times and it will not complete, i get an error message

    I have tried to download the update for itunes several times. Each time it get to the installation part and stall and then reverses and give me an erorr message. My current version when I open it, it says there is an error and I will not be able to download a CD into itunes, although I have completed several CD downloads.

    Go to http://www.mozilla.org/en-US/firefox/new/ and download the full installer. Run the installer and you will be up-to-date. Sometimes the updater just gets in a weird state...

  • Update iTunes to version 7 and now will not sync with my ipod

    Hi, when i go do add my new playlist it is saying error -50 and that the playlists are not sync'ed. Also my iPod is showing the 1.25 gd is used other formats? not sure what this is about. I have tried to restore and it will not let me - stating that another application is using it? Any advice welcomed.
    Thanks

    This discussion form is for Mac users only. I see that you have a windows machine and therefore should go to the iTunes for Windows discussion form. But to answer one of your question about "other formats," those are files that you sync to the iPod after you enable disk useage. Those can be anything that you put on your iPod.

  • Internal fan will not stop

    computer got unplugged one day and when attempted to re-boot the power button was jammed. Let sit for a few hours and tried again to turn on. With some wiggling we got the computer to turn on but the internal fan is running on high and will not quit. After a few hours of the fan running (so we would know that the computer was not hot) we shut it down thinking maybe re-booting it would help. We left the office with the computer shut off and the next morning we came in a started it up and the fan is still running on high. We know the computer is not hot and since the noise is very annoying we would love to know how to make it stop. Any suggestions would be lovely.

    Not exactly sure why this is in the Remote Desktop community, but try this:
    Unplug the computer.
    Wait a few seconds.
    Press the power button in for about 5 seconds then release it.
    Wait a few seconds.
    Plug the computer back in and then start it up
    I think they call  this resetting the SMC.

  • Laserjet 1200 will not stop running.

    I have a LaserJet 1200 as a back up printer.  It gets used once or twice a month and therefore is in great condition.
    This morning when I turned it on it started running and just won't stop!
    Any ideas why?
    Moly

    The "Incoming Call" message is shown whenever we see a ring signal on the line, regardless of the fax receive mode.
    If this message is showing up when no fax is being sent, then it means that there is noise on the phone line.  You can contact your phone company to discuss options in reducing the noise on your phone line.
    If this message is showing up with no phone line plugged in, then the modem inside the printer is detecting noise.  It is possible that the internal fax parameters have become corrupt.  If that is the case, then you can perform a "Restore Defaults"  in order to reset them.  Note: doing this will erase all of your settings.  You can print out a configuration report before doing this so you can reset them.  A restore can be done at the control panel by pressing [Setup] on the main screen (the button with the wrench on it), then select "Service" and then "Restore Defaults."
    This is based on my own experience with the product.
    I am an HP Employee.

  • Updated iTunes 11.2.2 and now will not open

    I get a message iTunes has stopped working. A problem caused the program to stop working correctly.
    windows will close the program and notify you if a solution is available.
    Of course, I have never received a notice of a solution...
    I would appreciate some help.
    This problem started when I updated iTunes 11.2.2 recently and I uninstalled iTunes and reinstalled iTunes but the problem persists.

    Hi,
    I would suggest you to refer to the article to troubleshoot issues with iTunes:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/TS1717
    If you use Windows 7, please try the method:
    COPY    QTMovieWin.dll 
    FROM    c:\program files (x86)\common files\apple\apple application support\
    INTO     c:\program files (x86)/iTunes
    https://discussions.apple.com/message/21985349#21985349
    I would also suggest you to refer to the link for Apple iTunes support:
    https://discussions.apple.com/community/itunes/itunes_for_windows
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Regards,
    George Zhao
    TechNet Community Support

  • I just updated to Firefox 4.0 and it will not show anything but the homepage, no bookmarks will work and I can't use th eaddress bar, why?

    Last night I updated from the old Firefox to the latest Firefox, 4.0 I think, and now NOTHING works but the homepage. None of my bookmarks work, the address bar doesn't work, nothing. I keep getting the error message "Firefox cannot find the server to the website"

    Simply go to:
    1.View 2.Select tool bars 3. Uncheck any of the toolbars below: a. Babylon toolbar b. Softonic Eng 7 Community tool bar!
    4.Finish.... if nothing happened try to unchechked other tool bars.

  • Installing update we had power failure and system will not boot

    We do not have a current working back-up, how do I re-install the os w/o erasing the entire hard drive?  We have a Intel Imac with snow leopard on it.

    Thanks for the info.  This is my fathers machine and I am the one that gets stuck fixing it when he has problems. I used to be an Apple Certified Repair Tech in 99/00 but that seems like a life time ago now.
    The system came with 10.5.  We upgraded to SL and have the disk and then to Lion which was a downloadable upgrade correct?  I will take a look at the link you sent.
    Thanks,
    Matt

  • I have updated itunes but now phone and ipod will not connect to pc - message reads apple mobile device service not started

    i have updated itunes and cannot connect devices - apple mobile device service not started?

    Hello there, mikemason5.
    The following Knowledge Base article provides some great troubleshooting recommendations:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

Maybe you are looking for

  • Business rule takes time to open

    Hi, Business rule takes much time when trying to open it. I'm new to essbase. Can any one tell in which log i can get the information like why it takes much time like that. Thanks Kumar

  • Retrieving data from a mirrored drive

    Hello, Can anyone advise how to retrieve/access the data on a mirrored drive? Both the primary drive and the mirrored drive do not load onto the desktop, and in Disk Utility only the mirrored drive shows up in the list of drives, unhighlighted. The o

  • DVD Menu only shows up after the movie?!?!

    Hey guys I'm new to IDVD! I made a slideshow on Imovie and I hit share it to IDVD, i think pick a menu and hit burn. But when I play the movie in my DVD player, the movie starts right up and then it's not until after the movie is done playing that th

  • Virtualbox on windows host: which video driver to choose ?

    Hello all: i have installed archlinux on my vista box through vbox well next step is to install X but i dont know which video driver to choose when i do lspci |grep VGA i get VGA compatible controller: InnoTek Systemberatung GmbH VirtualBox ... so wh

  • Total number of users in NetPoint License has been exceeded

    I am keep getting this msg on my website. I goto admin > business partner > license users and delete all users except manager the msg goes away and after few hours it comes back again Total number of users in NetPoint License has been exceeded. Some