Updated to 10.6.8 and now safari, system preferences, address book say "can't use this version"
Got a new harddrive in my 2010 macbook pro and rebooted it with time machine back up from a older mac running 10.5.8. I loaded snow leopard 10.6 from disc then updated to 10.6.8 on new computer after restore from back up. Now the Safari icon, system preferences and address book won't open and a box opens saying you can't use this version of the application system preferences with this version of mac os X You have sytem preferences 5.2. or safari says you have safari 5.0.6 etc. How do i update the apps so i can make them actually open. I can get them open in a round about way but not from the icons on my sidebar.
If you have an os on the hdd, why not do a clean install of the os (erase the drive and reinstall osx snow leopard) For snow leopard you insert the osx disk, restart the machine while holding down the c key
http://support.apple.com/kb/HT3910
Message was edited by: victoryhat
Similar Messages
-
I have no idea what happened!? I just updated Itunes on my macbook and now my entire song library won't play. When I click on a song it says it can't play because it can't find the original file. How is this possible? The original files are on my computer. I just upgraded!! HELP!!
The only thing I can think of is that you deleted these files off your computer without using iTunes to do it. Or maybe you backed up your computer to a previous state to where these song files didn't exist? The last one doesn't even make sense to me unless you used Time Machine to do it. But those are the only things I can think of.
-
I UP DATED MY MAC TO SNOW LEOPARD AND NOW MY COMPUTER IS TELLING ME I CAN'T US THE APP MAIL WITH THIS VERSION. I HAVE MAIL 3.6. PLEASE HELP
-
I have upgraded to mac os x snow leopard but it doesent let me open mail it says i have mail 3.6 so i tried to download a larer version of mail and i havent got space.
While the minimum free space some quote of 4GB or 10% in actual practice you want more like 10-15GB minimum and that doesn't mean it will perform as it should, only that it may be able to function at all. 20% free space, but none of that means that your free space is large enough, or that the pieces of free space may be so small as to still not allow writes.
The worst is when it is no longer possible to update the index to the drive directory of where files and fragments are located.
Last, good idea when moving to a new OS, to backup/clone your drive, erase and install, then use Setup Assistant, as in going from 10.5 to 10.6. It may seem like you or others can "get away" with avoiding formatting a drive. In practice, you want to be safe rather than sorry. And the only time to insure the partitions are aligned and healthy and no bad sectors, especially those contained by the OS that are hidden.
Swapping out hard drive, moving your drive to an external case kit can be found here:
http://www.macsales.com/firewire - has all types -
HELP.. I just opened this Mac Pro.. having second thoughts of the gift.. got it to work with pics .. and now it tells me ..
"You can’t use this version of the application “iPhoto” with this version of OS X." "you have iphoto 9.3.2"
I hav no idea how to use this Machine..If you're running Mavericks and have iPhoto 9.3.2 you can upgrade to iPhoto 9.5.1 at the App Store for free.
OT -
I allowed Apple updates about two weeks ago and now Safari is way too slow. I have tried using Airport and Ethernet and the problem is the same. Yesterday, I upgraded to Safari 5.1 and now the problem is worse. Any solutions?
I can't stand peremptory affirmations like "Nothing is wrong with Safari".
Thousands of users can't be wrong (see the discussions).
If I read you the right way, it's never software' fault, it's the user who's the culprit.
Amazing!
In this very case, the fact is we can't give to "christinefromfonthill" a good solution because weren't sitting in front of her Mac.
You give her a good advice which could, perhaps, lead to an improvement.
But must also admit that Safari is a very slow browser compared to Firefox or Chrome.
And you can't ignore all the problems which arose when upgrading to Lion and were related to the new build and specs of Safari 5.1.
The best example is the apparition of "garbage type" (use of Last Resort font) when reading numerous sites. This never occured before and is the direct consequence of Safari compliance to Web Open Type. This standard prohibits the use of Type 1 Postscript Fonts and is the reason why so many people are in trouble.
I use a Mac for more than 25 years.
I am a very "clean" user who hates the bells and whistles of third party.
My Mac is always up-to-date and despite all my Mac loving care, I run into some problems.
Imagine the nightmare which can occurs for the vulgum pecus who isn't, by definition, a power user aware of all the requirements for running a System in optimal conditions.
May be Safari is one step in advance on its time but lambda users are paying the price for it. -
I have just updated to OS X 10.9 and now find that I can't open Aperture to access photos etc, message reads : You can't use this version of the application "Aperture" with this version of OS X. You have "Aperture" 3.2.3... whichj is not a lot of help, i have limited technical ability and all i need to know is how to get Aperture to work again...help !
Software Update?
-
I just ran my updates for my MacBook Pro and now my iphoto won't open. I get a pop up that say's You can't use this version of the applicaton IPhoto with this version of os x. You have iphoto 9.2.3.
This screenshot shows which previous versions of iPhoto are compatible with Mavericks. It also indicates which versions qualify for a free upgrade to iPhoto 9.5.1 and which require a purchase:
Note 1: every day more users are reporting problems with iPhoto 8.1.2 so I've included it in the non compatible category.
Note 2: If your previous version of iPhoto was iPhoto 7 (08) or earlier you'll need to download and run the iPhoto Library Upgrader 1.1 application on the library before opening it with iPhoto 9.5.1.
OT -
I downloaded the OS X version 10.9 and my Iphoto version 9.2.3 will not open. I get a message that I can't use this version of the application I photo with this version of OS X. How do I upgrade to a i photo that will run on 10.9. Do I purchase a new program or can I do just an download?
Check the "Purchases" page in the Mac App Store and see if there is a more recent version there already waiting for you.
-
I just downloaded Snow Leopard to my Mac Book, now my ICalendar says I cant use this version of iCal with this version of Mac OS X, i currently have ICal 3.0.8.....what do i need to do?
Your profile shows you are running Snow Leopard. Put the Safari version you now have into the Trash. You need to reinstall Snow Leopard.
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
System Preferences, Address book, and ical suddenly won't open
As I said My system Preferences, Address book, and ical suddenly won't open. This seemed to have happen all at once. The only unusual thing to happen lately is that my ipod was corrupted and I resored it last night. Now when I try to open these programs I get one or two bounces on the icon, then nothing. My other programs including itunes seem to work fine. There are no error messages at all.
/System/Library/Frameworks/Message.framework/Versions/B/Message (file is empty)OK, this is an important part of your basic system and will need to be restored.
First you should boot from your Install Disk and repair your disk: see Using Disk Utility and fsck to resolve startup issues or perform disk maintenance.
Then I think you would be wise to consider an Archive & Install. See Mac OS X : About the Archive and Install Feature. This should put back the missing file(s). You will also then need to re-apply the Mac OS X 10.3.9 Update (Combo), and anything else Software Update says is missing.
Post back and let us know how you get on! -
When I try to install Lion it tell's me "You can't use this version of the application install mac os x Lion with this version of Mac os X" even though I have the latest update 10.5.8 of Mac os X?
The install icon has this sign on itmoose0422 wrote:
You can't install Lion over Leopard. To install Lion, a requirement is Snow Leopard. So you can either upgrade to Snow Leopard first or you can make a bootable Lion install disc and use that to wipe your hard drive and install a fresh copy of Lion.
So to make a disk would require you to purchase Snow Leopard and upgrade to 10.6.8 so you can use the App Store, unless you have access to another computer to download it from with your Apple ID. Remember it is about a 3.4GB download.
Good Luck -
I have just bought a 2011 iMac (2.5 ghz, 4gb) and logic express 9, and when i installed logic and tried to run it i had a message saying 'you can't use this version of the application logic express with this version of Mac OS X. How do i sort this out!? It is very frustrating as the main reason i have bought a mac is to use logic! Any help would be great as i am a complete novice when it comes to Macs!
You're probably on OS X Lion?
I had the same problem as you. I used Software Update to update Logic Express to the latest version, and then it ran without any problems. -
My apple id is with gmail, I want to change it and create an @me email address. How can I do this?, My apple id is with gmail, I want to change it and create an @me email address. How can I do this?
You can't merge accounts, if you start using the gmail account for iCloud by logging out of the me ID in system preferences and back in using the gmail ID, you'll need to copy all your data in calendars etc to the gmail account. you also won't be able to use the me address for mail unless you add the me account as a secondary account at system preferences > mail, contacts and calendars.
-
I bought iPhone 4s device from the owner and the previous owner is not present and the device has already been erased, how can I use this device using my Apple ID and iCloud
Hello adilx
The only way to get passed that and to use that iPhone is to ask the previous owner to remove it from icloud.com in the Find my iPhone section.
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
http://support.apple.com/kb/TS4515
If the previous owner is not present
Make sure the device is powered on and connected to a Wi-Fi or cellular network. Then contact the previous owner and ask them to follow these steps to remove the device from their account:
Sign in to their iCloud account at www.icloud.com/find.
Click All Devices to open a list of devices linked to their account, then select the device to be removed.
Click the Erase button to erase all content and settings from the device. When prompted, don't enter a phone number or message. Click Next until the device is erased.
When the erase is complete, click "Remove from Account" to remove the device from the account.
After the device is erased and removed from the account, you can proceed with the device setup process.
Regards,
-Norm G.
Maybe you are looking for
-
How to get two empty columns in reporting?
Hi Experts, How to get Two empty columns in a report, i have taken a formula and i have given '=0' in the formula box after executing the query that two columns containing zero's, but i don't want zero's, i want to display empty columns. pl help to
-
HT1430 my ipod id disabled and says connect to itunes how do i get ipod working again
My ipod is disabled and says connect to itunes, i can't seem to get it working, help!!!
-
Creating a delivery document wrt sales document
Hi All, Kindly help with any BAPIs/FMs to craete a delivery wherein I can enter: The reference sales document, shipping point,selection date,valuation type, quantity,goodsmvt date,serial numbers and then PGI.
-
Join two tables into a new one
I have two tables that I would like to save as one. They are related by a key (id). I've tried this: - Created empty table_new with the same columns as table1 and table2. - Then: SELECT * INTO table_new FROM table1 LEFT OUTER JOIN table2 ON table1.id
-
Hello, i wish to know How can i convert String like (java.awt.Color(r=77,g=32,b=77)) into a Color Object.ie.I got the color name by Color.toString() method.Again i wish to convert this string into Color Object. Is it possible?.Kindly help me .Urgent.