Updated to 2.0.2 Iphone won't recover Please HELP!!
I too updated my iphone to 2.0.2 and it has been in broken ever since, I also got error 1604 and the 2005. I have been reading the discussions for the past few days and no one really seems to know what the problem is, I have called apple twice 30 mins each. Uninstalled itunes twice, updated my USB, and tried stopping the recovery, nothing seems to work. I'm going to the apple store tomorrow yet it's over two hours away and don't want to waste the gas! Does anyone have any ideas??
Thank You
Error 1604 means that the USB connection between the phone and the computer was interrupted. Unfortunately there are about a dozen places this can happen in the communications protocol stack, and only a couple of them are under Apple's control. Have you seen Apple's tech note on this problem? http://support.apple.com/kb/TS1458
Important things to check:
1. Make sure your computer has USB 2 ports, not USB 1.1.
2. Do not use a USB hub.
3. Only use a USB connection on the BACK of your computer. Many computers with front connections have an internal hub that serves them.
4. Disconnect other USB devices that use power (keyboard and mouse are OK).
5. Create a different user id on your computer and try restoring with that.
6. Try a different computer.
Similar Messages
-
I just downloaded the new iOS7 onto my iPhone 5 and now I can not get my iMessage to activate with my Apple ID! My iPad connected just fine but my iPhone won't. Please help
I would go to Settings - General - Reset - and Reset Network Settings
Try it again after the phone restarts -
My iPhone won't restore, please help
I recently dropped my iphone 5 in a cat bowl of water it was left there for about 2-3 minutes, when i opened the phone, it was working fine but the sim card reader/modem wasn't responding so i thought "i could buy a new iphone and use the non working sim iphone as an ipod touch" so i figured that i would back up my details and content, then restore it. when i restored it the progress got to almost finished and an error code told me that there was an error (the error code was 3)
please help if you can i really want to get it to work because it is a beautiful phone and i love using it!!See this discussion. https://discussions.apple.com/thread/5372052?start=0&tstart=0
You will probably need to replace the device. As I said earlier, water and electronics do not mix and as you can read in the discussion, only a few people have survived that error. Generally, if the device has been in water, even if you get it to work in the short term, it will not last long before it fails completely. -
Ever since updating to new OS, my iphone won't sync to itunes. When I plug in the phone to the PC, dialog box says I need to update itunes to 10.6.3 or later. I did that update, but still get the same error message.
Can anyone offer suggestions?
Thanks!Since it told me to update, I updated to 10.7.
Then when I plugged in the phone again, it gave the same message that I need to update itunes. -
i have an iphone 4, i connect it to my laptop using the usb and then when connecting to itunes it says my phone is not up to date with itunes yet i cannot find an update 11.1 for my phones itunes? someone please help me.. kind regards
Itunes 11.1 is for your computer, not your iphone
It is required in order to sync with ios 7. -
I have updated my iPhone 4s to iOS7 but when i connect it to itunes on my PC it give me a msg to restore your iPhone in summary tab, Please help m using win 7 and updated itunes.
What is showing on the screen of the iPhone?
Does iTunes say the iPhone is in recovery mode? -
while updating 4.0 version to 5 version system shows sim card is not valid. My iphone is not working .Please help me
I would imagine your iPhone was hacked to make it work on your local carrier.
Updating the iOs to 5.xx will lock it back to the original carrier .The carrier holding the lock are the only
entity able to authorise the unlock .You will have to contact them and see if they unlock and the terms the apply -
I have iphone 4; tried to sync it said I need to update software so I clicked ok - it then said I need to restore and did above got to stage 3, clicked restore and update, but it comes up with an error saying iphone cannot be found Please help!!!
Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa -
After updating my iphone 3gs not activing please helpe me
after updating my iphone 3gs not activing please helpe me
See here > http://support.apple.com/kb/TS3424
Also see this discussion.
https://discussions.apple.com/message/21189708 -
Can't open numbers on my iPhone 5S and iPad mini (1st Gen.) after updating to the new version 2.0.1. Please help!
Okay , you should only delete EMPTY DUPLICATED folders, not preview folders or any others. I would put them all back. Then just delete any DUPLICATED EMPTY folders, do not disturb any other folders. On iOS switch off DOCUMENTS AND DATA under ICLOUD in SETTINGS. Do this on all iOS devices not just the one. Once deleted DUPLICATE FOLDERS on the mac in MOBILE FOLDERS then exit the LIBRARY. Open PAGES on your MAC and view folders on icloud. Check everything is all there as expected. If okay then DELETE and re-install PAGES app on iOS - THEN switch on DATA and DOCUMENTS in ICLOUD. Now open PAGES. If you have Time Machine on you can recover any 'lost' doc files and restore them from your mac from pages application. Try the process again and do not disturb any folders other than ones I mentioned as this is the system files LIBRARY. It is not a place to be over zealous in moving, altering and deleting folders and files. Take care please.
-
i have been having trouble my iphone 3gs doesn't work the slide to unlock is broken i have tired everything to get it open but it won't work please help me!
Basic troubleshooting steps are: Restart, Reset, Restore,
-
My iPhone 5 speaker suddenly doesn't work properly! The volume is so low I can't hear the phone ring. I've restored and updated and done everything I can think of. Please help!
Sorry, I think you got scam.
Last thing you can try is restore as new:
http://support.apple.com/kb/HT1414 -
I have been given an iphone 4 from one of my friends it seem that prior to ios 7 coming out he coudnt wait so he ilegally downloaded the software and now i can't activate it as it says my iphone is not regestered please help!
Then you should talk to that person. Apple won't help you if the iOS was downloaded illegally, and since this is their community, due to Terms of Use, no one here will help you either.
-
I had an PC crash while backing-up my iPhone4, before installing iOs7.
Now I am unable to restore the iPhone.
Can anyone please help me!
Arjen RonhaarHey Arjen Ronhaar,
Thanks for the question. I understand you are experiencing issues updating your iPhone to iOS 7. If you have not already done so, you may want to restart or reset the iPhone:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If the above steps do not resolve the issue, you'll want to restore your iPhone in recovery mode with iTunes:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks,
Matt M. -
After install ios 7 wifi won turn on please help....
after install ios 7 wifi won turn on please help....
Thanks for the update. I don't know if you have tried this, but I would next I would try removing and re adding the mail account from the phone, then testing the issue again:
Delete the affected email account from your device.
Tap Settings > Mail, Contacts, Calendars.
Choose the affected email account, then tap Delete Account.
Add your account again.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
If it persists, I would next backup your device to iTunes with this article:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
And restore it from your backup with this article:
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/ht1414
Maybe you are looking for
-
WebService to SOAP XI to R/3 Error
Hi All, Need some help, can not understand where exactly the problem. Created the scenario where creating User Interface in WebDynpro using wsdl file created from XI infterface for retrieving the customer Information from R/3 System. Web-Service is e
-
hi i need the query to fetch the data ... i have two table 1. plan 2. voidplan each table has id uniquely, and each table has rep_id but it is not unique. i retrieved the data from both table using union. now i need the data for the rep who is in bot
-
How to set a start date for inputDate calendar
The inputDate component in the ADF faces library is not allowing the user to choose a start day other than the current day for the calendar. (We are using JDeveloper 11.1.1.0.0) We found out that a fix was made to MyFaces trinidad in July 2006 for th
-
Synchronize in Alerts(Its Urgent)
Hi, I've to display the no of records affected using Alerts which may vary frm 1-1000. I want a synchronized output. For that,I've got a simple ex: declare i integer:=0; al_num number; alert_id alert; begin for i in 1..1000 loop alert_id:=find_alert(
-
Message determination in ERS.
Hi Experts, I encounter an error message "No message was found for Partner XXXX (Vendor Name) / Company code XXXX" while doing ERS, and hence unable to settle. I have already maintained the message determination settings in MRM1 for Vendor partner VN