Updated to 7.0.5 and STILL having issues!!
Just updated to Presenter 7.0.5 and STILL having issues. Hopefully someone here can help (I'm at my wit's end!) (BTW: Running Windows Vista)
Specific error: "MediaWriter::write: Unknown codec."
Thought updating would relieve me of this problem, but it happened AGAIN when I went to update the audio on a PPT I'd published!
[This error] pops up sporadically, but OFTEN during editing and ALSO during syncing - I tried both!
When it appears, I cannot move ahead. Each time I click "ok" and attempt to re-play from the point I was at, the error will appear.
The work-around I found requires that I:
- Click "ok" to the error message
- Go back to the editing window and jump a little ahead of where I was editing; then
- Click play/record
Doing this forces me to skip what I was attempting to listen to/edit and move forward from there. It happens ALOT during one editing session.
I cannot find anything on the Adobe website, or in Google search about this MediaWriter codec error! Do you know of it? Any answers on how to resolve it?
PPT STILL CRASHES!
PPT often crashes during audio editing and it did again, after updating [to 7.0.5]. It freezes and then I must force it to exit. It will attempt to restart PPT automatically, but not before I see this error on my desktop:
"PowerPoint experienced a serious problem with the 'adobe presenter powerpoint com addin' add-in. If you have seen this message multiple times, you should disable this add-in and check to see if an update is available. Do you want to disable this add-in?"
I know Presenter must work better than this... any ideas on what's going on?
Maybe I just need to uninstall and re-install. I have to find a fix.
Sorry for the long post, but as you can see, I'm in dire need of help and am hoping someone or some others have experienced these things.
Thanks so much for your time!
Matt,
Thanks for such a quick response!!!
I would seriously be sooo happy with THAT if I understand what you're saying.... So for all NEW presentations (that is I start with a blank slate, if you will), I will likely not experience either of these issues? I just really can't go back to previous PPTs, try to edit them and expect them to work w/o these issues?
If that's the case, I'm fine with that and will start anew. I've just been experiencing this since installing Presenter (Version 6) and am finally at my wit's end with it since it's so time-consuming. I do 100's of PPTs so can't go through this anymore.
Thanks!!
Similar Messages
-
I have an iphone 4. Recently I have issues with certain apps closing immediately once they are opened.(ie Email). Tried re-booting entire phone and still having issues. Any one else having this issue or know a fix for it?
Delete background Apps from memory and then Reset.
To Delete background Apps, double click Home button, in the bar at bottom, hold down on an App Icon until the minus sign appears, tap all the minus signs, until all background Apps are cleared from memory. Then Reset, hold both Home and Power buttons until the iPhone begins to restart itself, ignor the 'slide to power off' let the iPhone restart itself. Usually takes about 10 seconds of holding both buttons. -
I am still having issues with the TOC pictures. I got several chapter/section photos to show up, but can't seem to repeat this success. It is some mystery that happened during a time that I had practically given up. This should be such a simple thing. Drag and place a picture into the placeholder and it shows up in the TOC....right? Help, help help! want to get this thing done and it's taken two days of work just get some of the photos to show up. I am going to have to publish this ibook with no photos in several sections.....why can't this be simple? I have even had someone else spend hours trying to figure this out. This software is such a GREAT idea....come on...help with this little part of it.
I had the same problem myself. I got to the point where I couldn't replace the photo, of a new chapter, in the TOC. What I did was to duplicate an existing chapter that was working and was able to replace it's TOC's photo. I also found that if you try different areas of the photo you can sometimes get it to replace correctly. For example, instead of dragging the new photo to the middle of an existing photo, try dragging it to the right top corner.
-
HT4628 Still having issues with Lion os X and wi-fi
I am still havign issues with Lion os X and wi-fi. I have 3 domputers in my house including the new macbook pro that has lion os x installed. The wifi drops out all the time (every 2 minutes). I have followed all the instructions on how to fix this but I am still having issues. The other two computers work fine, one of the is Lion os X that has been updated but I managed to play with the setting and fix this one. This computer worked fine on Snow leapard and then a soon as I installed Lion the wifi started having issues.
When will apple make an update that is going to fix this problem. You want to buy a new computer that works, I took it into apple and they told me that it is my router, but I know it is the software as there are 100's of blogs and threads about this exact issue occuring only when their computer was updated to Lion.
Is there anything else I can do to fix this issue other then un-installing Lion and buying Snow Leapard?Does this problem happen with just your airport base station? Do you have a 3rd party wireless router? Can you duplicate the problem using any wifi access point? Did your computer come with 10.7 preinstalled? Did you purchase the applecare with your computer?
-
Ive reset full iPad numerous times, connected to itunes on pc and downloaded newest software and still having the same problems!! Ive already been to the apple store the 1st time this happened and was told it just needed the new software uploaded, but 1 week later the same thing started happening again. I live about 10 miles from an apple store and its right in the town center so a nightmare for parking. Cant be bothered with the hassle of going all the way there when there not much help!
problem solved after updating itunes to 10.6.3
-
I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
Currently use a Mac with the latest Mavericks 10.9.4Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport -
HOW DO YOU TURN OFF "FIREFOX PREVENTED THIS PAGE FROM AUTOMATICALLY RELOADING". I did perform the "see Advanced - General - Accessibility. It worked for me and my "user" site (don't know how to say my site) and still having problems with my wife's. I have gone to OPTIONS → GONE TO → ADVANCE and CLICKED THE LINE → ""Warn me when websites try to redirect or reload the page…""
This did not rememdy the problem. I did try to get on the other site suggested
http://kb.mozillazine.org/Accessibility.blockautorefresh
but got a 404 error...
I have googled the "ff prevented...." and after a number of hours searching I still have not found a fix...
REALLY HOPE SOMEONE CAN HELP ME....
JMYou should still disable this setting:
*Firefox > Options/Preferences > Advanced > General : Accessibility : [ ] "Warn me when web sites try to redirect or reload the page"
The setting in "Options > Advanced > General" is meant as an accessibility feature, as you can see by the label of that section, so that people with disabilities or people who use screen readers do not get confused and is not meant as a safety protection to stop redirecting.
What is the value of the <b>accessibility.blockautorefresh</b> pref on the <b>about:config</b> page?
*http://kb.mozillazine.org/accessibility.blockautorefresh
If you have problems with preferences, see:
*http://kb.mozillazine.org/Preferences_not_saved
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
My firefox wont load any page. Says it cant find the server of any of them. I can view the same pages in safari. I just updated to 3.6.7 and now having this problem. What is happening?
== This happened ==
Every time Firefox opened
== Today ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US) AppleWebKit/533.16 (KHTML, like Gecko) Version/5.0 Safari/533.16Read this somewhere else: Can't find it again so can't reference - apols.
fixed by entering
about:config into the nav bar
toggle dom.storage.enabled to 'true'
worked for me - but don't know what it does or why :) -
Mac Pro 6,1 STILL having issues with Open CL (4K scaling and SpeedGrade direct link grades)
I've seen the staff responses to the issues of the new Mac Pro GPU saying that 10.9.4 fixes everything. For me, it has fixed my export issues, so I'm glad. I'm no longer getting lines and artifacts on my renders.
That's great.
However, I'm still having several issues, and they seem to be linked to Adobe and Open CL.
Here's a video that shows what's going on:
mac pro issues july 7 - YouTube
Issue #1
Like most of you probably, I'm doing 1080p exports of most things I'm working on. The first project shows a 1080p timeline with a mix of 4k, 5k, and 720p footage. Because zooming in so much on a 720p file in a 4k timeline looks so crappy, I'm doing 1080p timelines and scaling everything to the size it needs to be. I started in a 4k timeline then switched to 1080p because the 720p footage looked so terrible. However, in the 4k timeline, I didn't have any of the issues I'm showing in this first part of the video.
When I switched to the 1080p timeline, I discovered a weird quirk: When I resize the 4k (or 5k) footage to the size it needs to be (which varies based on the frame I want), it goes back to the 100% view when I'm scrubbing through it. When I pause, the size of the video goes back to the way I set it. I show this in the video. Then I show what was my working solution for the time being: "scale to frame size", which brings all the videos to the size of the sequence frame size and works fine. Later, I turn off OpenCL in premiere and when I scrub through the video, it doesn't zoom back in or only stay at the size I set when stopped. For some reason all of these issues only happen at 50% scale or smaller. It doesn't happen at, say, 60%.
I've tested this with raw R3D files and other 4K (or 5K) clips (even clips exported from After Effects) and the same thing happens. It doesn't seem to happen with 2.5k footage or 1080p footage.
Issue #2
This is the second project you'll see in the video.
After grading in speedgrade (through direct link) I open my project back up in premiere and start playing it back. The video plays back with delays and frame drops. Now normally, this would be expected. But this is 1080p pro res footage, and this is just an effect added, and the yellow bar appears indicating that open CL should be accelerating the playback and it should do so smoothly.
Maybe I was just wrong in assuming that a simple grade from speedgrade would be able to playback smoothly. I turn off the grade, and it plays normally.
But then, when I turn off open cl and leave the grade on, the video plays back without ANY issues.
So to me, it seems I'm still having issues with Open CL and adobe. I've found fixes that make it work temporarily, I don't need that kind of answer. However, I would like this to work. Is there something I'm doing wrong? Something I need to do to get this to work?
Here are my specs:
Mac Pro 6,1 (Late 2013)
3 GHz 8-Core Intel Xeon E5
64 GB 1867 MHz DDR3 ECC
AMD FirePro D700 6144 MB (x2)
OSX 10.9.4
Firmware: 2.20f18
What you're seeing is latest version of Premiere (CC 2014, v8.0.0 [169] Build)
Everything here is ProRes 422, running from a Promise Pegasus2 R4 RAID (drives: 4x Seagate Desktop HDD 4 TB SATA 6Gb/s NCQ 64MB Cache 3.5-Inch Internal Bare Drive ST4000DM000) (that's thunderbolt 2).
I've done everything: I've restarted my computer hundreds of times, I've reset NVRAM and PRAM and done power cycles.
This isn't just some issue that started with 10.9.3 of OSX, the 4k issues happened when I first switched to a 1080p sequence back in February (2014) or so, which means it was an issue even with 10.9.2 and the previous firmware release.
I've reported this issue to adobe.That crash appears to be casued by the Facebook plug-in.
Create a new account (systempreferences -> accounts or Users & Groups on 10.7 and 10.8), make a new Library in that account, import some shots and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account. -
I'm frustrated, I am doing everything you recommend, I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you ave too many live channels, the disk is slow prepare...can you help?
Quote from: Richard on 15-November-07, 20:33:05
tornado2003,
What you need to do is boot into Safe Mode. Then delete the VGA Drivers.
After that boot normally and install the latest nVidia ForceWare Drivers
Take Care,
Richard
i guess you missed that:
Quote from: tornado2003 on 15-November-07, 17:26:52
ive tryed booting xp in safe mode but it just freezes after it loads up a couple of needed files .
ive even formatted my hard drive and tryed installing a fresh xp on it but it just keeps locking up when it gets to the "starting windows setup" .(this is just after it loads all the drivers from the xp cd) -
I updated my ipad1 thru iTunes from 4.2.1 to 4.3.5 and now having issues, especially playing videos. Anything I should know. I have not jail broken my iPad and don't want to.
you update it by connecting it to a computer running itunes and starting itunes up on the computer clicking on it in devices and clicking on the update button in the content menu
if it say you have the latests then it's because you don't own an iphone 3gs but an iphone 3g where the version 4.2.1 was the last released
in that case you can't ever update it
http://en.wikipedia.org/wiki/IOS_version_history#Current_versions -
I have a iphone 4s, it died and has been on the charger for the last two days and still wont turn on. How can i fix this???? condition of phone is not the best and was having issues staying charged to begin with but never NOT came back on. I've tried the holding of the home and power button but still nothing
iOS: Not responding or does not turn on - Apple Support
try this but maybe terminal if no result -
I am still having issues when visiting a website and then selecting the back icon and browsers is returning old data instead of current. How do I fix this?
found a solution thank you firefox live chat!!!
-
My mac hung up while installing an update. It took hours and still did not complete the update. I restarted my mac. Upon turning it back on, a wheel has been spinning on a grey screen. I tried to reinstall OS X from utilities, but encounter an error. What do I do?
Hey Manaskala,
First point of call on all grey screen issues is the following:
http://support.apple.com/kb/TS2570
Given this issue has appeared after a software update, I'd advise you do the following instead though:
1. Get an external hard drive, with enough space to put the entire hard drive of your Mac onto. Make sure you've safely copied any data you have off of it, as the next step will erase it.
2. In the recovery HD of your machine, use Disk Utility to format you EXTERNAL hard drive with the partition table as GUID, and the format as Mac OS Extended (Journaled).
3. Get out of Disk Utility, and click Reinstall Mac OS X.
4. When asked where, choose to install onto your external hard drive.
5. When the download and installation is complete, your Mac will reboot into a clean fresh setup screen. Make your user account an administrator, and make up a name and password; I use 'Test' and 'test'.
6. Your machine is now running from the external hard drive, not the internal hard drive, so don't be alarmed when you don't see your files.
7. Open the finder, you should see 'Macintosh HD' in the sidebar. This is the internal hard drive of your computer.
8. Open Macintosh HD, and copy out the following folders into a new folder on your desktop:
-Users.
-Applications.
-Library. (This only needs to be done if you use 3rd party software that saves things in the /Library, do a quick google and see if it does e.g. Photoshop, Protools).
9. When these have copied (it'll take quiet a while), you can now use Disk Utility to erase your hard drive. Don't erase Macintosh HD but the ENTIRE hard drive on the inside of your Mac, and as Thomas A Reed mentioned, there was likely an existing issue on your HDD so please go to Security Options and choose 'Zero Out' before clicking erase. This will rebuild the partition table which was a possible cause of the failed update.
10. Reboot the machine holding 'Option', go to recovery HD.
11. Choose 'Reinstall Mac OS X', this time onto your INTERNAL hard drive.
12. When this is complete, make another admin user called test and password test, like you did last time.
13. Run Software Update from the menu of your Mac.
14. In the Finder, you should see your external Hard Drive. open it up, inside that you should see your desktop etc, and on the desktop will be your folder containing Library, Applications and Users.
15. Go to Finder up next to the and choose File -> New Finder Window.
16. In your second finder window, open up Macintosh HD (through the Go -> Computer menu), and go to your Users folder.
17. Open the Users folder in your first finder window, and copy your user folder (has your name on it) into the second user folder (the one inside Macintosh HD).
18. This might take a while.
19. When complete, go to System Preferences -> Users and Groups and unlock the padlock.
20. Click the '+' sign, and make a new administrator user.
21. Now, the fun bit. Note the name of your user folder you copied, e.g. 'Nathan', containing all of your stuff. Note the difference between your user folder (has your name on it) and the Users folder (contains YOUR user folder, guest folder and shared folder).
22. Make the ACCOUNT NAME of your new adminstrator user the EXACT name of your user folder (normally lower case and without spaces), this is case sensitive folks. Your full name can be whatever you want, usually your full name.
23. Then click create. You should be informed that a home folder with that name in it already exists in the Users folder, would you like to make your new account from that folder? say YES!
24. When this is complete, log out of the Test user, log into your new account we've just made, all your stuff should be there.
25. ???????
26. Profit.
There's a few little bits that may need to be cleaned up afterwards, applications folder from your external hard drive should replace the applications folder on your internal hard drive, if the previously mentioned /Library folder contained important goodies then that should replace the /Library folder on your new Mac.
Hopefully that will help you out, straight after that is done make sure your stuff is there, erase your external hard drive and turn on time machine! -
HT1918 updated my credit card info and still cant purchase anything??? help
updated my credit card info and still cant purchase anything on itunes? help
Apple - Support - iTunes - Contact Us
Apple - Support - Contact Apple Support
Customer Service: Contacting Apple for support and service - this includes international calling numbers.
Maybe you are looking for
-
I just purchased a 128 Gig iPhone 6+. When I have the sound off and volume as low as possible, I get a static sound coming out of the speakers. It is distracting and annoying when I am in meetings, etc. Does anyone know what to do? Thanks in advance.
-
Segregate internal ordered items from purch. order items for the i-pro user
We want to know if there are any Oracle i-Procurement implementations that have segregated the internally ordered items via an Order Management sales order from items ordered on a PO (purchase order). We have considered three possible paths to purse.
-
I am running Windows Vista Ultimate 32 I have a AMDfx 60 3 Gigs of Ram and 8800 GTX This definately should meet minimal requirements however... Since I installed windows Vista my video does not function. Sound is fine...... Video just is random still
-
Open XE without UNDO tablespace
Hy I have an oracle xe installation on linux ubuntu that does not start, it arrives in MOUNT status. When i try to open i get the following messages: ORA-01172: recovery of thread 1 stuck at block 153 of file 2 ORA-01151: use media recovery to recove
-
Importing song problem - not complete
I am able to import most songs but I noticed that some songs are not being completely imported. I just got a new laptop (windows xp) so I don't understand why there is a problem. I did try re-installing Itunes but that didn't work. I never had a prob