Updated to 7.6.1.9 and now MOST songs cannot find their path!!!!!!!!!!!!!!

I'm about ready to scream. I updated iTunes to the 7.6.1.9 version and now when I tried to synch my iPod it gave me a message that stated it cannot find some songs.
When I look at my iTunes it has and exclamation point next to the MAJORITY of my 5,000 songs! I'm not going to sit and find the song path for these. What the heck happened???????????????
Also, I downloaded two new games before I tried to synch my iPod and it also says it cannot find the games. When I go into the games it shows the correct path!? How come it cannot find it, or how do I force it to find that path?

Ok, I checked several forums and websites. After freaking out thinking I would have to import all of my songs again from cd's I haven't seen in years - I found my songs in my iTunes folder on my hard drive. I highlighted the folder with the songs I needed and dragged it into my open iTunes library. The songs copied over and play now. The bad news is, it made duplicates of the songs. So I have to delete all of the corrupted files with the exclamation points next to them. (to make it a little easier, I went to VIEW > show duplicates. By holding CTRL and selecting each of the corrupted files, you can right-click and delete several at once. Good luck.

Similar Messages

[Forum FAQ] Cannot perform a backup schedule via Windows Server Backup and receive "The system cannot find the path specified." Error

Symptom One
You attempt to
schedule a backup every day via Windows Server Backup on Windows Server 2008 R2. At the beginning, the backup works without issue. But after a few days it failed and you receive the error “Windows Server Backup:
The system cannot find the path specified.”
Cause
The issue may occur if there is
no shadow copy storage space available on the backup volume.
Verify
You can use the List ShadowStorage command to check if you have enough storage space to store the newly created shadow copy. If you've reviewed the size of the backup snapshot and discovered
that there is no allocated space for the storage association, you need to resize shadowstorage.
Solution
You could run the command below to create shadow copy storage space on the backup volume:
vssadmin resize
shadowstorage /for=<ForVolumeSpec> /on=<OnVolumeSpec> [/maxsize=<MaxSizeSpec>]
More Information
Vssadmin resize shadowstorage
http://technet.microsoft.com/en-us/library/cc788050.aspx
Symptom Two
When you add
another external hard drive to backup schedule via Windows Server Backup on Windows Server 2012, it fails and you receive the error “The System cannot find the path specified.”
Cause
The issue is due to the
Original Destination Disk was not attached to the server.
Verify
You could check the disk status in Disk Management to see if the Original Destination Disk is offline or removed.
Solution
You need to attach
Original Destination Disk to the Server then choose another external hard drive as backup target. After that, you could remove the Original Destination Disk.
Workaround
To work around this issue, please use the WBADMIN command line tool to add disk.
WBADMIN ENABLE BACKUP -addtarget :{ DiskID}
The AddTarget parameter takes disk ID as parameter. It can be retrieved by running "WBADMIN GET DISKS" command.
Example:
WBADMIN ENABLE BACKUP
-addtarget :{ aa123d14-bba0-1dd9-0d93-80aaaa6bbb63}
More Information
Wbadmin enable backup
http://technet.microsoft.com/en-us/library/cc742130.aspx
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

good

Update to Version 1.1.1. and now IPOD songs does not play on speaker

After I update the iPhone to version 1.1.1., I can not hear a call, but can hear it only when I put it to speaker also when I play music in ipod mode I can not hear it on the speak, i need the headphones. Can someone help? I retored it many times and I am having the same problem.

eddi0 wrote:
After I update the iPhone to version 1.1.1., I can not hear a call, but can hear it only when I put it to speaker also when I play music in ipod mode I can not hear it on the speak, i need the headphones. Can someone help? I restored it many times and I am having the same problem.
After the installation of 1.1.1 I can still hear calls through the earspeaker, the speaker my headset and my BlueTooth headset.
Additionally my iPod functions through the speaker and my headset just perfectly.
If you continue to restore your iPhone and you in fact are having the problems that you suggest you have after the 1.1.1 update I would either go to the nearest Apple Store or call AppleCare immediatley.

Updated to iOS 6 this morning and now it can't find networks.

When I go to wi-fi, it just continually searches for networks that I know are there and accessible. I have tried a hard reset, as well as turning wi-fi on and off and reseting network connections. Help!

if that doesnt work,
i would suggest you turn your wifi router off..and phone off wait a min start the router wait till its up
start the phone.
but you are not seeing the broadcast messaging to connect (which is the issue) and I dont believe you played with any of the wifi default settings.
you could attempt to restore the iphone to an earlier point in time with your backups to see if that eliminates the problem....(there are lengthy processes that we could get into) --- example of a thread https://discussions.apple.com/thread/3042520?start=555&tstart=0
or you may want to go to the apple store or do an express lane ticket (os6 upgrade)
(which may be a good idea) https://expresslane.apple.com/GetproductgroupList.action
to have them walk you through it or have them tell you device fault go into store

Updated music files on my hard drive and now itunes can't find path.

I updated my music files on my hard drive and now iTunes can't find the path. too many to manually do. can itunes refresh or should i delete all itunes music files and re-import?

Once a track is in your iTunes library, you should not touch it except through iTunes. But I guess you know that now.
iTunes, to answer your question, cannot "refresh." If you re-add those files to your library, iTunes is unable to match them with the existing library entries, and will create a bunch of duplicate entries. This is a longstanding shortcoming of iTunes (and the source of lots of traffic on this fourm).
If there are "too many to manually" reassociate, then starting over, in the sense of deleting and then re-adding, may be a good plan.

I updated to MacBook pro last night and now safari won't open

I updated my MacBook Pro last night and since I did this I can not open Safari. It crashes and sends a report to Apple. Not tech smart enouh to figure it out can anyone give me simple suggestions?

ted39 wrote:
I updated to OS 10.8.2 and now Pages won't open
Please elaborate on what exactly you mean by it "won't open".
Do you try to launch it and get an error message from the Finder (for example, something like "This application is damaged and cannot be launched....")? Does an icon for the application ever appear in the Dock when you try to launch it? Does it start to launch and then immediately crashes (Finder will display an "unexpectedly quit" dialog)? Or does it start to launch and never seems to "finish" launching (in other words, it basically hangs and is unresponsive)?
If the application crashes, please post the contents of the crash log here.
Otherwise, if the application seems to be hanging, can you, before attempting to launch it, open the Console.app application (it's in the /Applications/Utilities/ folder), and see if anything is reported when you attempt to launch it? If so, please post it here.

I just updated my IPad to iOS 5 and now can not send email. The error message says the server rejects the address which is not true Asti sends on my desktop.

I just updated my iPad to iOS 5 and now can't send email- I have tried the obvious but no luck. Any suggestions?

Usually 'authentication required' means that you need to submit a username (or e-mail address) and password to the e-mail server, when sending a message. This logic is not different between Outlook and Thunderbird, and even with the latest and previous version of Thunderbird.
Of course you can try the previous version again to see if it solves the problem, although you'll be less secure because you would be missing the latest fixes.
If you'd be willing to get back to Thunderbird, say if your frustration level with your new app would increase too much, please see our article [https://support.mozilla.org/en-US/kb/cannot-send-messages cannot send messages] for further help.
In all other cases I'd appreciate it if you could mark this as answer so we know you don't need further help.

I updated itunes to version 11.0 and now it will not open and says it is corrupted?

i updated itunes to version 11.0 and now it will not open and says it is corrupted?
how do i get it to work it updated fine then asked to restart comp so i did now it will not open

Let's try a repair install of iTunes first.
Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
Can you launch your iTunes now?

TS1717 I have updated to version 11 of itunes and now it wont open comes up with comment saying it is not installed correctly or corrupt. Help

I have updated to version 11 of itunes and now it wont open comes up with comment saying it is not installed correctly or corrupt. Help

A complete uninstall/reinstall is worth a crack with that one:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Had a recent crash on my macbook, was previously using OS 10.6 I think. Restored from recent Time Machine backup and updated to OS 10.8.2 and now I cannot open Logic Pro 9. I get a 'No entry' Icon and a not supported on this type of Mac message. I cannot

Had a recent crash on my macbook, was previously using OS 10.6 I think. Restored from recent Time Machine backup and updated to OS 10.8.2 and now I cannot open Logic Pro 9. I get a 'No entry' Icon and a not supported on this type of Mac message. I cannot update either as anything up to 9.1.1 tells me I don't need it yet 9.1.2 tells me I need an eligable Logic Pro Version was not found in applications.
All of my files are stored in a separate hard drive with only the actual app having been on my Macbook. Should I just reinstall?

Hi
To run Mouitain Lion you need to update Logic.
For the updaters to work the Logic application must be:
a) Within the Applications folder, and not in any sub-folder
b) Named "Logic Pro" with no extra numbers or spaces
CCT

TS1506 I just updated my IOS to 7.1 and now I can't open Microsoft attachments - I used to always do it. Help - I use my iPad for work and now can't see any attachments.

I just updated my IOS to 7.1 and now I can't open Microsoft attachments - I used to always do it. Help - I use my iPad for work and now can't see any attachments. I've tried opening straight into other apps and just get error messages, and I the mail preview there is just a grey screen telling me the file name and size. It worked fine until I did the IOS upgrade

Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Delete the app and redownload.
Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
http://support.apple.com/kb/ht2519
 Cheers, Tom

I updated to OS 10.8.2 and now Pages won't open

I updated to OS 10.8.2 and now Pages won't open

ted39 wrote:
I updated to OS 10.8.2 and now Pages won't open
Please elaborate on what exactly you mean by it "won't open".
Do you try to launch it and get an error message from the Finder (for example, something like "This application is damaged and cannot be launched....")? Does an icon for the application ever appear in the Dock when you try to launch it? Does it start to launch and then immediately crashes (Finder will display an "unexpectedly quit" dialog)? Or does it start to launch and never seems to "finish" launching (in other words, it basically hangs and is unresponsive)?
If the application crashes, please post the contents of the crash log here.
Otherwise, if the application seems to be hanging, can you, before attempting to launch it, open the Console.app application (it's in the /Applications/Utilities/ folder), and see if anything is reported when you attempt to launch it? If so, please post it here.

I tried updating to iso 8.0.2 and now my ipad is stuck in recovery mode and will not do anything. it will not reset.

I tried updating to iso 8.0.2 and now my iPad is stuck in recovery mode and will not do anything. it will not reset.

RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

During the io 5 update process, my iphone 3gs froze and now will shut off and turn on by itself, and will not allow me to unlock the phone or do anything with it. how do i fix this?

during the io 5 update process, my iphone 3gs froze and now will shut off and turn on by itself, and will not allow me to unlock the phone or do anything with it. how do i fix this?

Follow the instructions here > http://support.apple.com/kb/HT1808
You may need to try a few times to get it to work

HT1222 I just updated iTunes to the latest version and now I can't play more than have of my songs. Says it can find it and then leasds me to locate it. I don't know where to look. Help!!!

I just updated iTunes to the latest version and now I can't play more than half of my songs. When I click on a song it comes back and states that it can't find it and prompts me to try and locate it. I don't know where to look. Help!!!!

Hi ldhong,
There are a few ideas in this article on how and where to look for missing iTunes media:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Hope this helps!
- Ari

Updated to 7.6.1.9 and now MOST songs cannot find their path!!!!!!!!!!!!!!

Similar Messages

Maybe you are looking for