Updated to current version and it won't start up. sqlite3.dll not found. Try to reinstall. I have tried many times unsuccessfully. What is the fix?
A pop-up told me to update to the current version. I did. Installation completes successfully. When I try to run the program, open a browser window after installation, I get an error that says sqlite3.dll not found, try to reinstall the program. I have tried uninstalling and reinstalling about a dozen times over the last few days, and I always get the same error.
Although you say you have let the battery drain, was it for long enough? Since nothing else that you've tried so far has worked, I suggest that you leave the iPod unplugged for at least four days, preferably a week. That way, if something is stopping the iPod from turning the screen on, then whatever it is will drain the battrey. However, since the screen isn't on, that may take longer than if the screen was on.
Then, after that time, plug the iPod into a power source and leave it alone for at least thirty minutes. Only after thirty minutes will it show any signs of life, but you should leave it until it is fully charged before trying to use it.
If you get to this stage, the fact that the battery has drained will cause the iPod to reset when it springs back to life.
Let us know how you get on.
Similar Messages
-
When updating my itunes on my PC (Windows 7) this message came up: Itunes program won't start because MSVCR80.dll is missing. Try reinstalling to fix this problem.
If I re-install, will I lose all my downloaded songs and other data I've accumulated over time?
Thanks!!Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
I made an in-app purchase and it won't download. It keeps saying I've already purchased this in-app purchase but it hasn't been downloaded. It then say's Oops! Your transaction didn't go through, Please try again! and I have several times. The purchase has already been charged to my credit card on file.
Open the App Store and navigate to purchased, it should show the missing app under Not On This ipad. There should be a small cloud icon you can click on to download it.
-
Windows 7, Adobe update icon launches Updater, always fails. No other Internet access issues, how can I get the Photoshop updates?
Try
Direct Updates
https://www.adobe.com/downloads/updates/ -
How can I get updates for Photoshop CS5 to download to my new Mac book pro where CS5 is already installed from my original disk? I have tried many times over 2 days. I get the same error messages re downloading error. I successfully downloaded the current version of Adobe DNG Converter & it installed perfectly. Help please!
The Adobe auto updater is highly unreliable.
You need to look for and download the update yourself and then manually apply it as per the detailed instructions on the download page:
Adobe - Photoshop : For Macintosh
~~~~~~~~~~~~~~~~~~~~~~
Please note that the Adobe Camera Raw plug-in must be updated separately, after you have updated Photoshop:
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh -
I have an iphone4 currently running on iOS 5.1.1 and while updating to ios 7 it shows an error 3004 and I have tried many times forcefully also as per apple discussions but I can't update so help me.......
http://support.apple.com/kb/TS3694?viewlocale=en_US&locale=en_US
-
When I try to upgrade and install to iOS 5.1, error message prompt "operation stop running". I have tried several time but failed. Also, would like to know why always need to have wifi access in order to upgrade the version of iPad iOS, what is the purpose of 3G then? This is really nonsense using wifi + 3G iPad. need help ! Thanks.
The file is too large to download via 3G. There is a 20MB limit with 3G. The purpose of having 3G is that you have internet access everywhere and do not need to be near a WiFi hotspot or network.
Not every single thing that you do every single minute of the day on the iPad involves downloading files larger than 20MB. You can surf the internet all day long sitting out in a park somewhere with 3G - but not with a WiFi only iPad - unless you use a hotspot with it.
Try turning off your firewall and anti virus software while you try to download the iOS update. -
I have attempted to update ipad1 with latest update but after extracting software it goes to restoring ipad software and stops at 25% on the bar. Have tried several times but it does the same, I now have one usless ipad help! any ideas ?
when connected click the iPad in the left navigation panel of iTunes, on the bottom of the summary tab: how much memory is "free" (grey)?
-
hello i was updating my ipod 5 to ios 8 and when it was in the middle of updating it came up that i had to connect to itunes and i have done so and its telling me to restore it and i have tried many time to and its not working. So what to i do??
What exactly happens when you try to restore via iTunes?
Error messages? -
I downloaded a movie on my apple tv and now when I try to watch it tells me there is an error and to try later. I have tried several times over the last 5 days and nothing changes. Any help please?
What is your current connection via speedtest.net
Make sure DNS is set to auto (settings - general - network)
If on wifi try ethernet -
I have tried many times to download creative cloud desktop app such as AI, LR, PS, ID and so on. the following message appears You are running an operating system that Illustrator no longer supports. Refer to the system requirements for a full list of supported platforms. The only one I have succeeded to download are DW and MU.
Please could you help outHello,
please have a look at the different sys-requirements for example:
AI: http://helpx.adobe.com/illustrator/system-requirements.html
PS: http://helpx.adobe.com/photoshop/system-requirements.html
(LR 1-5: http://helpx.adobe.com/de/lightroom/system-requirements.html)
You will find the same explanations for your other programs.
Hans-Günter -
I have a song that I purchased from Itunes on my Iphone and there was an error downloading. Every time i try to download it times out and says to try again. I have tried several times and still get same message. Help? I have been charged for this song but have not been able to download.
Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards. -
I disabled my iPhone 4 and while doing a restore via iTunes, it is downloading and timing out so the download is not completing. any idea how to get past that? I have tried many times and the same error keeps happening.
You need to force the phone into recovery mode, as described here, & restore it:
http://support.apple.com/kb/ht1808
Sorry, you've already lost all data on your phone. -
We had a power surge the other day and ever since, my bookmarks in Safari do not display their respective logos, i.e., New York Times logo rather than the generic blue circle. How can I restore them?
Thanks for any help.One way to add Facicons back is to visit those sites again.
It is time consuming if you really want to have all those back. -
When I follow the directions about deleting bookmarks by clicking on the bookmark, then clicking on the blue star and then clicking on delete bookmark, it will work with some but not all my bookmarks. I have noticed that the ones that won't work appear to be marked in unsorted bookmarks rather than bookmarks menu.
I have tried many different ways to delete these bookmarks but nothing works. Some of these bookmarked pages need to be signed in and I no longer have a way to sign in or want to sign in.
I just want to delete the bookmark. Please help.This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
Maybe you are looking for
-
HFM 9.3 - FR Studio - can't format negative numbers with minus sign prefix?
How can negative numbers on an account balance report be made to appear with a leading minus sign?? This is a necessary requirement for generating an export file for loading to our new Tax software, but does not appear to be a format option.
-
Needing to use xml data source to populate richfaces tree nodes
Hey I cant seem to figure this out. I know I probably need to write some java code but Im not sure how it should look. I have some xml and I need to use the data from within the elements to populate some nodes on a richfaces tree. I know how to use a
-
Windows Installer 3.0 and ZFD 3.2
We just got an application that uses, and requires, Windows Installer 3.0 upon deployment. None of our Windows 2000 or Windows XP computers has that version of installer, yet... What issues are there with installing the installer and this application
-
Regarding sending mail as XLS attachment.
Hi SAP Gurus, I am taken code from program "BCS_EXAMPLE_7" for sending mail with xls attachment. I am using following code to send as copy . L_RECIPIENT = CL_CAM_ADDRESS_BCS=>CREATE_INTERNET_ADDRESS( Email_ID ). CALL METHOD SEND_REQUEST->
-
Sample code that allows System.inheritedChannel() to work?
Hi, I would like to create a C program, which will launch a Java runtime. I want the C program to open a listening socket, then pass that listening socket to the started Java VM. I should be able to do this, and have the java VM inherit the listening