Updated to i-OS 8.2 On Ipad 2 and camera does'nt work

Camera stopped working when I upgraded to I-OS 8.2 on I-Pad2 restore reset retry nothing works so afr
any Ideass

Reset the iPad.  Hold the on/off and home buttons together for about 10 seconds until the Apple logo appears.
By the way, you posted your iPad question in the iPhone forum.

Similar Messages

  • What is "Assisted GPS" on the iPad and how does it work?

    What is "Assisted GPS" on the iPad and how does it work?

    I purchased the iPad mini Wi-Fi & Cell because it has GPS. OK, it is assisted GPS but the GPS works very well as stand alone. I got the iPad mini for use in flight, so I dont even have a sim card in it. The GPS works perfectly in flight under all conditions. I have cross checked it against typical approved aircraft installations and it is very accurate at all times. I use it in Wi-Fi mode on the ground when updating my aviation database, when planning a flight, or similar circumstances. The primary advantage of A-GPS is quick location reading when first turned on, when on the ground where the GPS satellites signal may be of reduced quality. At 10,000 feet plus, it is a stand alone GPS. I have frequently turned the iPad off in flight for periods of time and when powering up, it gave me accurate positioning in a few seconds, never exceeded 10 seconds. I have also tested my iPad on the ground, using the aviation maps, and the GPS works perfectly also.
    It remains possible that there is some feature that enhances the GPS when on the ground, even if there is no sim card in the iPad. But I doubt that any of these would work in an aircraft at high altutide. Nonetheless, I would appreciate knowing more about this.

  • Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

    Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
    My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • Why the Flash on my IPad 2 Camera does'nt work anymore After updating to IOS 7?, Why the Flash on my IPad 2 does'nt work anymore After updating to IOS 7?

    Why the Flash on my iPad 2 Camera doesnt work anymore After updating to IOS 7??

    No iPad has ever had a built-in flash for the camera.

  • HT4623 I recently updated to ios6 & have now found my forward facing camera does not work. We have tried to reset ipad & numerous other suggestions but no luck. Why has this happened & how can I fix it?

    I recently updated my software to ios6 & have now found camera not working on my ipad. We have tried resetting & numerous other solutions but nothing has helped. Can anyone tll me why this has happened & ow o I fix it, thanks

    1. Double-click the Home button to reveal Task Bar at bottom
    2. Hold the Camera app down for a second or two until you see the minus sign
    3. Tap the minus sign to close app
    4. Re-launch the app and test
    Note: If necessary close all apps in the Task Bar

  • What is the "Saved Gestures" option in iOS7 for iPad, and how does it work?

    I can't find any guides or tutorials on it anywhere.

    Not helpful at all, but I probably should have been more specific. I'm trying to figure out how to use the custom gestures. Do they do anything more than just trace specific shapes on the screen? For example, can you make a gesture that will open your photos or mail app without having to back out of the app you're in? Or to close the app you're in without using multitasking?

  • When I try to update my apps on my MacBook Pro, Ipad, and Ipod it wont allow me. On the computer it says theres and error. (11111) But on the Ipod and Ipad it starts to update and completely stops. What should I do?

    When I try to update my apps on my MacBook Pro, Ipad, and Ipod it wont allow me. On the computer it says theres and error. (11111) But on the Ipod and Ipad it starts to update and completely stops. What should I do?

    Maybe this.
    Fix iPhone Apps Stuck "Waiting" During Installation
    Try update the apps one at a time

  • I have an Apple iphone 4s and for the last 4 weeks I cannot download or update any apps. I have an iPad and a Mac book pro and the apps download on these devices fine. My phone tells me that I have 12 updates but when I press update all or update any indi

    I have an Apple iphone 4s and for the last 4 weeks I cannot download or update any apps. I have an iPad and a Mac book pro and the apps download on these devices fine. My phone tells me that I have 12 updates but when I press update all or update any individually nothing happens at all. It also does not ask me for my password any more but my iPad and mac book do.
    I have signed in and out of the app store and the password is correct. I have tried both kinds of reboot but that did nothing. I have tried to update the apps by connecting phone to Mac book pro...it shows the apps being download on the Mac book and says it will sync them to my phone but it does not. Everything else on my phone works fine.
    Any ideas ...Please!

    Thank you, this has resolved both the iphone and ipad problem immediately.  I am concerned that I may have a problem with apps that I bought under my old  AppleID as they will not be recognised.  Any suggestions for this please?

  • When I attempt to updates apps on my ipad my password does not work. I tried updating them one at a time and it still doesn't work. I've reset my password and I can use the new password and update apps on my PC but not on my ipad. Why?

    When I attempt to update apps on my ipad my password does not work, even when I attempt to update each app separately. When I change the password it works on my PC but not on my ipad.  Why?

    Try logging out of your account on the iPad by tapping on your id in Settings > Store and then log back in and see if it then works.

  • After a rescent update on my ipad 3 Ican no longer connect to my pc with WIFI.  I have tried resetting ipad and itunes but nothing works.  Talked to support and they were no help.  Any suggestions?

    After a rescent update on my ipad 3 I can no longer connect to my pc with WIFI.  I have tried resetting ipad and itunes but nothing works.  Talked to support and they were no help.  Any suggestions?

    What error do you get if any?
    Have you tried connecting to another network besides your own?
    Do you use DHCP on your router or static IP address?

  • I am having trouble updating the operating system on both my ipad and iphone. I get a strange message when I open my PC desk top that says "the procedure entry point sqlit3_wal-checkpoint could not be located in teh dynamic link library SQLite3.dll"

    I am having trouble updating my operatI am having trouble updating the operating system on both my ipad and iphone. I get a strange message when I open my PC desk top that says "the procedure entry point sqlit3_wal-checkpoint could not be located in the dynamic link library SQLite3.dll"  Any ideas what my problem is?

    Hi whatsthe77,
    Welcome to Apple Support Communities.
    You may want to follow the steps in this article to reinstall iTunes:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    Have a great day,
    Jeremy

  • I have updated to 8.1 on both my ipad and iphone 5. I am missing photos...they display as blank boxes. What should I do next?

    I have updated to 8.1 on both my ipad and iphone 5. I am missing photos...they display as blank boxes. What should I do next?

    Apps downloaded on one should also appear on the other as long as the app in question runs on both iPads and iPhones.

  • I've spent 6 hours trying to update my iPad, and it doesn't work. It can't get past trying to back up, and just stops and gives an error code. I've deleted the backup, re-synced, and tried again and still no luck. What do I do now?

    I've spent 6 hours trying to update my iPad, and it doesn't work. It can't get past trying to back up, and just stops and gives an error code. I've deleted the backup, re-synced, and tried again and still no luck. What do I do now?

    I am not running any antivirus software on my Mac, and I have the firewall shut off. Any other ideas? I have not problem downloading all other Apple software updates. I downloaded the latest iTunes software before starting the iPad update process.

  • I updated to version 6.0 on my iPad and did not back up my iBooks. I lost all access to books purchased

    I updated to version 6.0 on my iPad and did not back up my iBooks. I lost all access to books purchased. How can I get them back?

    Thanks Frank but not there... Nothing shows up in purchased folder

  • I updated my iPad 4 iOS 8.0.2 and the camera does not work, ... Please help

    I updated my iPad 4 iOS 8.0.2 and the camera does not work and hangs and unconnected, .... Please help me in this question,... Thanks in advance

    You're welcome, but I didn't do anything. Try closing the camera app completely and reset your iPad and maybe that will help.
    In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Maybe you are looking for

  • Playing recorded loops (they stay greyed out)

    When recording on a loop , it creates multiple recordings, and places it on a new track. I love this functionality! However only the last loop recorded lets me play it / hear it. How do I enable the other tracks so that i can hear them (ungrey them o

  • Bridge won't open NEF files, when you double click them, using PS CC

    I have installed the latest version of PS CC and the Bridge, but when I go to my Nikon NEF files and double click to open them, they open up in some weird Window Photo Gallery, then I went to the preferences for bridge and reset the settings, and now

  • Sync encountered an error while syncing: Unknown error.

    Bookmarks vanished on multiple computers. Error message on all platforms: Sync encountered an error while syncing: Unknown error. Android device seems unaffected. Attempts to re-sync good data from android device have no effect. I filed a bug report

  • Error: ORA-01033: Oracle initialization or shudown in progress

    I can't connect to my Oracle database 10g XE from both browser and SQL*Plus. I get this Error message each time I try: ORA-01033: Oracle initialization or shudown in progress. I am so confused, since I worked with it successfully yesterday and tis mo

  • Audio Channel Mapping problems

    Hi Everyone, I can't seem to find a solution to my problem. I use Audition in two situations. Firstly, with the internal soundcard (Mac Book Pro) when I'm out and secondly, when I'm at home with my focusrite scarlett. When I'm out, Audition won't pla