Updated to iOS 5.1 and my iPad 2 reboots every time I edit a photo in photos.

I screen shot something and I wanted to crop something out in photos but when I tapped edit, it reboot my iPad. When it turned on again, and I repeated the process, it reboot again. I closes all the running apps and manually reset the iPad but nothing changed. Is it a bug in iOS 5.1?

Andy-
I just tried it and it worked OK on my iPad 2 with iOS 5.1.
I've read that other weird problems with 5.1 were cured by going to Settings-General-Reset-Reset All Settings.
You might also try resetting (rebooting) by holding both the Home and Sleep buttons for several seconds until the Apple logo appears.  Ignore the "Slide to power off" arrow.  The iPad will restart after a couple of minutes.  Resetting this way will not hurt anything, and sometimes clears up mysterious problems.
Fred

Similar Messages

  • HT4623 I have an iPad 4th generation and when I updated to iOS 7 I can't use FaceTime.  Every time I tried to sign in I get a message asking me to check my Network connection.  FaceTime and iMessage are the only application that give me this message.

    I have an iPad 4th generation and when I updated to iOS 7 I can't use FaceTime.  Every time I tried to sign in I get a message asking me to check my Network connection.  FaceTime and iMessage are the only application that give me this message.

    Try Reset all settings
    Settings>General>Reset>Reset All Settings
    Note: Data will not be affected but settings will be reset.

  • If i close firefox and try to reopen it tells me its alreasdy running and I have to reboot every time??? WHY IS THIS Please

    if I close FireFox and then try to open it again I get a message saying its all ready running and i must close current session and start again or reboot and I always have to reboot ?? Most frustating is there a reason for this I can change settings for

    Hi Andis.
    First of all, this is completely normal behavior, although it's a bit irritating, I know. What happens is that when you close Firefox, despite the window disappearing right there and then, Firefox keeps running for a little bit until the whole closing procedure is completed. This can take a fraction of a second on fast computers, or can take a few seconds on slow computers or when Firefox is storing a large session (if you save your tabs). All you have to do is wait a bit until Firefox closes, and then open it again.
    To see if it's still running, you can press CTRL+SHIFT+ESC and then, under the Processes tab, you can see if firefox.exe is still there. If it's taking an unusual amount of time to close (which happens very rarely, and only if the browser freezes on exit), you can force the application to terminate from this application (task manager).
    Firefox 4.0 will reduce by 97% the time it takes firefox.exe to close, so this problem will be basically erased for Firefox's next version.
    Until then, I can recommend you this extension, which helps you restart your browser more easily and without bothering about closing times:
    https://addons.mozilla.org/en-US/firefox/addon/3559/
    Hopefully this will help.

  • HT4623 After updated to iOS 7.1.1, my iPad went wrong with time and date. How can I solve this?

    I have updated my iPad mini to iOS 7.1.1 recently. After updated, it went wrong with time and date even I tried to restart it or set manual time/date or set auto time/date. How can I solve this problem?

    Hello Phirum OL,
    Here is an article that will help you adjust the date and time settings on your iPad:
    iOS: Troubleshooting issues with date and time
    http://support.apple.com/kb/ts3920
    Learn the steps to take if your device has any of the following issues with the date and time.
    Incorrect date or time
    Wrong time zone being set automatically
    Issues related to automatically switching with daylight savings time
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • I just updated to iOS 6.1 and my iPad 3 is stuck in recovery mode???

    After receiving the prompt to update my software on my iPad 3 Retina, I plugged the iPad into the charger and began the software update. A few seconds later, everything went black and the plug into iTunes icons appeared. I think this is called the recovery mode screen.
    I tried plugging into iTunes on my iMac, but it wants me to restore the ipad and I will lost all of my apps and content. What the **** is going on here???
    Why cant Apple make a **** software update that JUST WORKS???
    Can anyone please help...

    Its absolutely imperative you make new backups of your data before updating any software for the above reasons, alone.
    You will nomt looseany of your purchased content fomr the itunes/app stores though. You can redownload them directly on the device after restoring: http://support.apple.com/kb/HT2519
    If a recent backup contains the data you want, just restore from said backup.
    Ultimatley, things can go bad, its all human created afterall. Next time, take the time to cover yourself.

  • Trying to install iOS 7.0.3 on IPad but fails every time.  Tried more than one WiFi

    Any suggestions

    The update starts to install showing that the download will take about 1 minute.  Then switches to preparing update.  When almost complete there is a pop up that says update failed. 
    Have tried resetting by holding the home and power buttons.

  • After I have updated to iOS 6, all the applications I have closes every time I try to use it, what do I need to do to resolve this issue/

    Is there anyone who has the same issue?

    I would check your messages tab in the settings app and make sure you two aren't connected to the same imessage/apple id. That can sometimes cause some confusion, especially when using imessage.

  • TS4510 I just updated to IOS 6.1 and the Do Not Disturb stays on all the time, now what? It had been fixed a while ago.

    Mid January, I noticed my Do NOt Disturb was working again, turning off during the day. Now, I just updated to IOS 6.1 and it's on all the time, is this going to get fixed?
    thanks, Susan

    Have you deleted the account and re-added it?

  • I recently updated to iOS 8.0 on my Ipad however when i try to agree to the new terms and conditions i get an error message saying either 'Cannot connect to server' or 'Your session has timed out please try again' what can be done to resolve this?

    Hi, I recently updated to iOS 8.0 on my Ipad mini however when i try to agree to the new terms and conditions i get an error message saying either 'Cannot connect to server' or 'Your session has timed out please try again' what can be done to resolve this problem? Also i cannot download anything from the App store as a result of this.

    Can you check the Object Security for the Analysis Menu and Export button and see if it is restricted?
    Also, is this a Oracle DB?  IF so, has the following 32 bit Oracle Client components been isntalled:
    Oracle Objects for OLE
    Oracle Data Provider for .NET
    Oracle Providers for ASP.NET

  • When I updated to iOS 8.1 on my iPad 2 it failed when installing it's in recovery mode and when I go to iTunes to restore it downloads the update to about 900 Mbps then gives me error 9006

    When I updated to iOS 8.1 on my iPad 2 it failed when installing it's in recovery mode and when I go to iTunes to restore it downloads the update to about 900 Mbps then gives me error 9006

    Hi Willy,
    Welcome to Apple Support Communities.
    The article below provides information about specific update and restore alerts, including the 9006 alert that you saw when attempting to update your iPad 2 to iOS 8.1. Try using the instructions provided to see if the issue is caused by a conflict with the security software on your computer.
    Resolve iOS update and restore errors
    Check your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
    I hope this helps,
    -Jason

  • Updated my iOS on iTunes and now iTunes cannot locate my iPad 2

    I couldn't update my iOS 4.3.5 because I could not locate the update button on my iPad 2 so I went on my computer and in to my iTunes and updated the iOS 7.0 and also updated my iTunes to 11.  Now my iPad 2 says HELLO and I followed the instructions, but when I restore from my iTunes, I can't get very far.  When I went on my computer and into iTunes, now it says that my iPad 2 is no longer there and my movies/books that I purchased are unable to locate. 
    What can I do to get my iPad 2 working again.  At one point on my iPad 2, it asks if I want to enter it as a new iPad 2, restore from iCloud or restore from iTunes, should I enter it as a new iPad 2?
    I would appreciate any help.

    If on mac try going into Applications click on
    Image Capture.app
    at bottom click open iphone in Iphoto, click apply

  • The battery of my iPad four drawn very fast after update to iOS 8.1 and the sensitivity of my iPad decrease until I cannot swipe it and is very lag please fix it immediately

    The battery of my iPad four drawn very fast after update to iOS 8.1 and the sensitivity of my iPad decrease until I cannot swipe it and is very lag >< please fix it immediately

    Hello alicelan,
    After reviewing your post, I have located an article that can help with device errors. You may want to consider restoring your device to factory settings to resolve the issues you've described:
    Use iTunes to restore your iOS device to factory settings
    Restoring iOS software deletes all your data and content from your device, including songs, videos, contacts, photos, and calendar info.
    Before you restore your device
    Make sure you’re using the latest version of iTunes.
    Use iTunes to back up your device. Transfer and sync any additional content to your computer.
    Turn off Find My iPhone in Settings > iCloud on your device to disable Activation Lock.
    Restore your iOS device
    Connect your iOS device to your computer using the cable that came with it.
    Select your iPhone, iPad, or iPod touch when it appears in iTunes. In the Summary panel, click Restore.
    Click Restore again to confirm that you want to restore your device to factory settings and delete all data and content. iTunes will download the iOS software file and restore your iOS device.
    After your iOS device is restored to factory settings, it will restart. Once it does, you’ll see the "Slide to set up” welcome screen. Follow the steps in the iOS Setup Assistant. You can set up your device as new or using a previous backup. If your iOS device has cellular service, it will activate after you restore.
    Learn more
    If you get an error message, find out how to fix most update and restore errors.
    If your iOS device with cellular service doesn’t activate after restoring, find out how to fix activation issues.
    If your iOS device restarts repeatedly or isn’t responding, for example if you see a stopped progress bar or no progress bar, put the device into recovery mode and restore it again.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • How do I update my iOS? I have the iPad 1 and have tried over and over to try and update the iOS version to iOS 5.1, nothing works it will start updating then say that it did not update? PLEASE HELP!!!

    How do I update my iOS? I have the iPad 1 and have tried over and over to try and update the iOS version to iOS 5.1, nothing works it will start updating then say that it did not update? PLEASE HELP!!! P.s I'm running newest version of iTunes.

    Connect your iPad to your computer and let iTunes back up your iPad. After it does that disconnect it and go into your settings under general and under reset and select erase all content. After you do that reconnect to your computer, open iTunes and follow the screen options to set up your iPad as new. Once it is done doing that see if you have the latest version of iOS installed and if it does then either download gain the apps you had before or restore them from the backup made previous.

  • TS3899 Since I updated to iOS 8.0.2 my iPad has not been working properly. It freezes in the middle of things. It cuts out when I'm browsing. It's slow when I. Typing and more how do I sort it

    Since I updated to iOS 8.0.2 my iPad has not been working properly. It freezes in the middle of things. It cuts out when I'm browsing. It's slow when I. Typing and more how do I sort it

    Hello Jm23ur,
    After reading your post, it sounds like you are experiencing performance issues with your device. You may want to consider restarting the device first, and then resetting if that does not work. This article provides detailed instructions for Restarting, and Reseting:
    Turn your iOS device off and on (restart) and reset
    How to restart
    Press and hold the Sleep/Wake button on the top of your device until the red slider appears. Then drag the slider to turn your device completely off.
    After the device turns off, press and hold the Sleep/Wake button again until you see the Apple logo.
    How to reset
    You should reset your device as a last resort and only if you can't restart it.
    To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
    Thank you for contributing to Apple Support Communities,
    BobbyD

  • Hi there - I can't open the YouTube website or any videos following and update to iOS 8.3 on my iPad 2. Can't anyone offer any advice? thanks.

    Hi there - I can't open the YouTube website or any videos following and update to iOS 8.3 on my iPad 2. Can't anyone offer any advice? thanks.

    If you're on the YouTube website on safari, then you should use the YouTube app, it works much better

Maybe you are looking for

  • MacBook Alum battery heating up while being charged and used

    MacBook Alum battery heating up while being charged and used at the same time. Is this normal? Or is it only mine? :S

  • 15% of free space on startup disc is preferred.  Fact or Myth.

    I see this all the time.  Some users say yes, others say no.  Can I get a confirmed answer as to which is correct?  Thanks for any anticipated input from either school of thought.

  • Acrord32.exe problem...not able to open pdf files..........

    I am using adobe reader 9 version. I am not able to open pdf still the acrord32.exe is running in the background. Plz help. Acrord32.exe running processes are proportional to number of times i tried to open the pdf...........So manually i need to end

  • Bug in FF Adbobe Reader Plugin?

    Hi, i use a web application which pulls pdf reports from a  server by http-post requests, so parameters are transmitted in the requests-body. As a viewer i do use Acrobat Reader Plugin, most recent release with FF 3.0.3 on Windows XP pro. So due of t

  • Problem with Elements 11

    I have installed Elements 11 and it worked OK for about 3 days. When I try to open the editor now it starts to load, then freezes. My PC uses Windows 7, the program is registered & everything else works normally.