Updated to IOS 7.1 and now my "Call Waiting" does not work, nor will the "Call Waiting" indicator stay on..... Any help?
Updated to IOS 7.1 and now my "Call Waiting" does not work, nor will the "Call Waiting" indicator stay on..... Any help?
Settings > General > Reset > Reset Network Settings
Similar Messages
-
I downloaded ios7 to my iphone and now my volume control does not work 99% of the time. Is there something I need to do to correct this?
Adjust the Volume Control in Control Center, or try a RESET.............
-
I just updated to ios 6.1 and now my cellular data is not working
I just updated to ios 6.1 and now my cellular data is not working
UPDATE: Ok, I just got back from the Apple store and I've performed a full restore. The good news is that the restore did allow cellular data to work again, restoring as new and restoring an iCloud backup both worked fine. I also tried everything Apple suggests on the http://support.apple.com/kb/TS3780 an only restoring had any effect. Even though that worked for me, I went Ahead and went to the Apple store because this problem had already occurred with me, but only intermittently (requiring frequent resets); the 6.1 update seemed to just make it more 'permanent' so to speak. after the tech tested it with a known-good SIM compared to a new iphone 5, he observed the same stalled cellular data, so my iPhone was swapped out. Hope this helps.
Cheers -
I updated to 6.1.3 on my iPad 1, and now my app store does not work. What should I do?
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
Cheers, Tom -
My daughter down loaded the new 6.0 software and now her home button does not work. Tried reseting to original settings and reset the operating software. Any ideas?
Try:
fix for Home button
Fix a broken, unresponsive or sticky iPhone Home Button
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
since yesterday I have been unable to use FaceTime across all my Apple devices: Iphone 5s, MAC Notebook, and Ipad Mini. It does not connect nor make the ringing sound. Why is this and how can it be fixed?
I am haveing same problem canot find itunes.msi
-
I updated my iphone software to IOS 6.2 yesterday and im not sure if it is a coincidence but now, my contact names do not show on incomming calls or messages. Also they do not show on past calls or recent history.
All my contacts in my phonebook still exist and are correct, the problem only occurs when receiving calls or messages. please help i need this fixing
Regards,
FrostyTry to restore your iphone via iTunes or update to ios6.1.2.
If itunes gives an error with restoring (DFU/Recovery or just normal)
try this:
open your computer and search on windows; C://windows/system32/drivers/etc/hosts
open up the hosts file in note pad you will see IP adresses and more add another line and put in this:
#74.208.10.249 gs.apple.com
this is a by-pass to the cydia/saurik restore server, it has nothing to do with jailbreaking over voiding apple's warranty
let me know if succeeded! -
I recently updated my ipad wifi only to the new ios 6.1.2 and initially I had the auto cover lock option which can be seen in the Generals tab, but then it stoped working!! Before the update, the auto cover lock worked fine. So after trying all the options, I then did a complete reset on the ipad and now its gone all together from the General tab!! I can no longer see the "auto cover lock" option.
It got really annoying when I tried to use the lock button and it wont lock the sceen!! To test whether the button was allright, I did a long press and the message came if I wanted to shut down the ipad. So the button works fine, but I cannot use it to manually lock the ipad. Now the only way to lock the ipad is to wait for 2 mins (autolock) and still I cannot wake up the Ipad using the lock button. To do that I have to use the Home Screen button
Does any one else have similar issues and any solutions pls!! CheersHarryAustralia wrote:
I recently updated my ipad wifi only to the new ios 6.1.2 and initially I had the auto cover lock option which can be seen in the Generals tab, but then it stoped working!! Before the update, the auto cover lock worked fine. So after trying all the options, I then did a complete reset on the ipad and now its gone all together from the General tab!! I can no longer see the "auto cover lock" option.
The iPad cover lock is for when you use a cover with magnets in it to lock and unlock the iPad when you close the cover or open it. Try running a refrigerator magnet along the sides of the iPad and see if that trips the iPad Cover Lock back into the settings.
That is not the same thing as the iPad Auto Lock setting which allows you to set an allotted time before the iPad goes to sleep.
You can try resetting all settings to see if the Auto Lock feature retinrs to the iPad.
Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. This can be a little time consuming re-entering all of the device settings again. -
The internet provider reset my router and now I cannot use Apple Tv. I tired restore and reseting the apple tv and the Network test is fine. Netflix shows error atv-ui10 and you no movies come up it just shoes black tickets at the top of the screen and says i am not connect. Internet works fine.
Delete/forget the network connection on the ATV and reconnect to the network.
Power cycle the router. -
Just upgraded to 10.8.2 and now RUSE via Steam does not work
Now that I have upgraded to 10.8.2, the video game RUSE (opened via Steam) crashes (everytime, always). It ran fine from 10.6.8. Any plans to fix this problem? Ubisoft blames Apple on their support sites....
Put another way, did I just pay money and spend all day upgrading my system only to lose accessibility to a bunch of programs?Mt. Lion will not run any PPC or 32 bit applications. If you RUSE fits into one of those categories, you might consider a partition or external HDD with Snow Leopard OS on it so that you can play your game.
Ciao. -
Transfer account from old MBP to new one and now my account password does not work.
I trasferred my account from one MPB to a new one using targeted disk method. I left my desk while it finished and came back to a registration page. I registered and the system rebooted. Now I see my login details but the password form my old Mac fails. The hint it gives me also seems to be bogus becaues I've tried many variations of the hint and they also do not work.
I'm submitting this from my original MBP and had not problem using my old password logging in to it. Why didn't my password transfer properly and now how do I fix my new MBP?
I made sure duing the transfer process to select everything for transfer -- accounts, applications, etc. All check boxes were checked.AKAspuds wrote:
I trasferred my account from one MPB to a new one using targeted disk method. I left my desk while it finished and came back to a registration page. I registered and the system rebooted. Now I see my login details but the password form my old Mac fails. The hint it gives me also seems to be bogus becaues I've tried many variations of the hint and they also do not work.
I'm submitting this from my original MBP and had not problem using my old password logging in to it. Why didn't my password transfer properly and now how do I fix my new MBP?
I made sure duing the transfer process to select everything for transfer -- accounts, applications, etc. All check boxes were checked.
So now you have 2 accounts, logout of this one and in to the other. -
This last week (of 17 Sep 12) I updated my iPhone 4 to iOS 6 and now my Yahoo mail does not work. I keep getting a "Yahoo server busy" message. This problem has not effected the update to my iPad 3 - it works fine. In addition, I have deleted and added my Yahoo mail - same result. Looking for ideas on repairing the link between iOS 6 and Yahoo. Cheers
Same here, albeit with a 3G and both a work Exchange account and personal Gmail are out of action. Reentered my password on the Gmail to no avail.
Unfortunately it seems that increased success has come too fast to Apple, it's starting to display Microsoft-like behaviors, e.g., releasing stuff and letting the customers serve as the beta / guinea pigs. -
HT204291 I did the update my apple tv this morning and now my air play is not working ?
I did this morning update in my Apple TV and now my air play doesn't work!
READ the article from which the question was posted and follow the troubleshooting steps provided.
-
Maverick update now my login screen does not work please help.
Hello hope you can help. I have a 24 inch Mid 2007 Intel iMac. It has been great until now. I recently did the Maverick update and now my login screen does not work. When I wake the computer up the screen appars with my picture icon. When I click on it nothing happens. If I click on it a second or third time the beach ball appears and nothing happens. I have to shut the unit down with the power button and when the unit powers back up everything works normally. Are there any suggestions out there? I have updated the software without resolution. Is this computer too old? Do I have to buy a new one?
Thank youYour iMac can support Mavericks according to the requirements > OS X Mavericks: System Requirements
Try a Safe Mode boot. That deletes some system caches that may help.
Startup your Mac in Safe Mode
A Safe Mode boot takes much longer than a normal boot so be patient.
Once you are in Safe Mode, click Restart from the Apple () menu.
See if there's an improvement for the login screen. -
My iphone 5c crashed after updating to IOS 8.02 and now i don't have anything from the last 3 months. What do I do?
Don't worry about that. iPhone stuck in recovery mode always happens when you update the iOS on your iPhone. There are two ways to solve it.
First is is to put your iPhone in DFU mode.
Step 1. Turn off iPhone
Step 2. Hold down the Power and Home button.
Step 3. When you see the Apple logo, release the power button but continue holding the Home button down.
Step 4. Open iTunes and wait for it to tell you that it’s in restore mode.
If DFU mode can't solve the problem, I'm afraid the only solution is to try some 3rd party software, like iPhone data recovery or something like that. You may simply try the tutorial here: How to Fix iPhone that is Stuck in Recovery Mode.
Maybe you are looking for
-
Hi all, Need some help to store VI front Panel to PDF. Im using 'Dopdf' application to convert the front panel to pdf. My requirement is i need to save the PDF file name programatically instead of popping out a window to browse pdf file path
-
I need help to get this working I can't get anything to load in my SWF.
// drop shadow filter class import import flash.filters.DropShadowFilter; // transitions imports import fl.transitions.*; import fl.transitions.easing.*; // Determine where on the stage we want to have the thumbnail images start xStartPos = 40; yStar
-
My question is, why don't my calendar entries on my iPad not go to my Macbook and my phone? They do not show on iCloud.
-
HP Officejet Pro L7680 All-in-one Printer - Failure to access update.
I cannot access the update for my printer. I have upgraded to Windows 7 32-bit. I keep receiving the error message: could not connect to Content URL/Default Content. Can someone please help me by telling me what to do? I am having no other issues
-
SRM Webdynpro Printing Do not Print Directly
Hi, We have a problem in printing area. Printer have been set and printing from ABAP System is OK. Request will be printed directly. This was set in user default parameter, tick the "Output Immediately" checkbox. But, the problem is printing from Web