Updated to iOS 8.0.1 and now my phone can't make calls and Touch ID is broken. I'm on verizon

I Just updated my iphone 6+ to the new 8.0.1 update and now I can't make calls and my Touch ID sensor doesn't work? my cell phone is my only source of communication, please fix this ASAP!!

Hello there, ChrisR83.
Apple has released 8.0.2 which resolves the issues reported with the update you are referring to. The following Knowledge Base article walks through the steps on how to get that current update:
Update your iPhone, iPad, or iPod touch iOS software
https://support.apple.com/kb/HT4623
If you'd like to see all the features of the 8.0.2 release, this article provides some great in-depth information:
iOS 8.0.2
http://support.apple.com/kb/DL1758
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Similar Messages

  • I plugged my Iphone 4s in my computer last night and it asked if I wanted to do an update, so I started it and now my phone can not be found and says I have to start in recovery mode, the display on the phone is a circle itunes and the cord to plug it in?

    I plugged my Iphone 4s in my computer last night to sync and it asked me if I wanted to do an update, so I clicked to start the update. When I woke up this morning my phone is frozen with the display having the blue circle itunes on the top and bottom of screen has the charger cord, letting me know to plug in, but it was already plugged in. The message in Itunes says, itunes has detected an iphone in recovery mode. You must restore the phone before you can use it. I know if I hit recovery mode that I lose everything currently on my phone. Any suggestions?
    Thanks,
    patti

    If you're in recovery mode, all data is ALREADY lost.  You've no choice but to restore.

  • Updated to the new iOS 6.1.2 and now my 4S wont work for calls and texts

    updated to the new iOS 6.1.2 and now my 4S wont work for calls and texts

    I called Vodafone corporate help desk as I have a company phone :-
    I was told to hold down the off button at the top of the handset at the same time as holding down the round menu button at the bottom of the handset for 20 seconds - the phone went off, then restarted and it all seems OK now.
    Def something with the ios 6.1.2 upgrade :-((

  • I just tried updating my iphone 4 and now my phone is in recovery mode and i dont want to loose anything on my fone someone help please!!!!!

    i just tried updating my iphone 4 and now my phone is in recovery mode and i dont want to loose anything on my fone someone help please!!!!!

    If its stuck in recovery mode then you have to restore it. Hopefully you had a recent backup on Icloud or on your computer that you can apply after restoring it. If so then you shouldn't loose your data.
    Just connect it to Itunes and restore it. After it will promt you when your done to restore from backup or as new. If its on icloud unplug the phone and go through the intro screen till you get the same prompt. Sign into icloud and restore backup.

  • Am facing issue on my iphone 5s after updating to ios 7.1.1, every while the phone hang after lock it and cannot unlock and even cannot turn on the screen this is so annoying, kindly advice if i have to go back to the store as device still under warranty

    Am facing issue on my iphone 5s after updating to ios 7.1.1, every while the phone hang after lock it and cannot unlock and even cannot turn on the screen this is so annoying, kindly advice if i have to go back to the store as device still under warranty, and if its a hardware issue or software ??

    Hello HaithamOkeely,
    We've an article that provides the following troubleshooting steps that may help stabilize your iPhone.
    If the device is unresponsive or if certain controls aren't working as expected, restart your device.
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let it charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Cheers,
    Allen

  • I tried updating to the IOS6, there was an error, and now my phone is in recovery mode and i need to restore to factory settings.  Is there anything I can do?

    I tried updating to the IOS6, there was an error, and now my phone is in recovery mode and i need to restore to factory settings.  Is there anything I can do?

    You have to restore your iPhone. Same thing happened to me and many others. Sorry man.

  • HT4623 my iOS6.0.1 software update was interrupted and now my phone won't switch on and it's permanently stuck on the start up apple. help please?

    my iOS6.0.1 software update was interrupted and now my phone won't switch on and it's permanently stuck on the start up apple. help please?

    Connect and select iPhone in computer iTunes, in Summary page click Check for Update button.

  • I have a wireless router for my house, and my I-phone can find the network and sign in but it won't show up in airport for my i -mac even when right beside the router.  What can I do?

    I have a wireless router for my house, and my I-phone can find the network and sign in but it won't show up in airport for my i -mac even when right beside the router.  What can I do?

    Do you have any videos/movies in the video app?
    In iTunes if you right click on the video and select Get Info and go to the Option tap what Media Type is shown?

  • HT4061 I tried to update my itunes and phone and it said "error" and now my phone only shows the charger and and itunes icon

    I was trying to update my iphone 4s and it came up an error.  Now my phone only shows a charger and the itunes app.

    You might need to do a few times
    http://support.apple.com/kb/HT1808

  • Updated to iOS 7.1.1. Now when I open my music playlist and choose a song to play, my songs begin scrolling by and deleting.

    Is anyone else having problems after updated to iOS 7.1.1. After my update, when I open my music playlist on my iPhone 4S and choose a song to play, my songs begin scrolling by and deleting. I've re-synched a couple of times and am still running into the same thing.

    https://discussions.apple.com/message/25195858#25195858

  • I updated to ios 6.1.3 on my perfectly good 3gs and now my phone can't see my sim card

    Hi everyone, I recently updated my 3gs 16gb from 5.1 to 6.1.3 as suggested by itunes so I went ahead and performed the update, I really wish I had not!, as soon as the update had finished a message came up saying that there was no sim inserted, strange I have updated the other three iphone we have in the house without this problem, I checked with the carrier to confirm that my phone was still officially unlocked and that the sim was working fine ( it is! as I can swap it to other phones every single one recognises the sim but I checked with my carrier anyway.) I do have an active case open on this and i intend to get my phone compensated for one way or another.
    Maybe some of you community members know of others with the same issue,
    I will clear a few things up first,
    I have tried restoring numerous times and each time it fails to see my sim, I have tried updating with the sim in /out.
    The phone was working perfectly with no errors prior to the update!
    The sim I am using is the one that has been in the phone fully working for some time and the phone accepted all uk sims with no problem.
    I upon a suggestion from support that I get the phone checked, which I have done, The result is there is NO hardware problem with the phone!
    I am going crazy over this and before anyone suggests I get a new phone! This phone was in full working order prior to the 6.1.3 update the update has done this and as it is not hardware related it is a software error delivered via the update service on itunes.
    Any help or suggestions greatly accepted other than buy a new phone as this seems to be an regular reply.
    Thanks in anticipation
    Chris

    Hi imobl,
    Thanks for your response, I forgot to add that the five 3uk sims we have in use, I have tried all of them none of them are recongnised non of them have pin codes, I even purchased four more sims Tmobile (original carrier) Vodaphone, 3 and giffgaff.

  • I did the new software update and now my phone wont work at all and keeps saying it needs to be restored from back up

    I had my phone plugged in to my iTunes yesterday and downloaded the new software. I then went to install the new software and it crashed half way through with an error message. Then it went off completely and wiped everything. I tried to restore from back up and now it says it has restored from yesterdays back up, restarts afterwards and says it needs to restore from back up again. and just goes round and round doing that. Even if i try an earlier back up. I also tried wiping everything back to factory settings and restoring from back up and that did the same as above. Please help!!

    Something in your backup may be corrupt. Try wiping it and setting it up as a new device, then sync your apps, data and media back to it from iTunes. DO NOT resotre from your backup. If the problem is contained in the backup, it will bring it right back again if you restore.

  • I updated my verizon iphone 4 to 2.7 and now my phone will randomly shut off and is very "buggy". Is there any way I can downgrade to 2.6?

    Exactly as the title states. The 2.7 update is HORRIBLE and made my phone very buggy. I beleive I had the 2.0 or 2.1 software before this update and I was fine with that. Anyway to go back to the old software? If I restore to an earlier date then i'll lose all the new numbers ive added to my contacts since then

    Click here, buy a Mac OS X 10.6 DVD, and then run the 10.6.8 combo updater.
    (90452)

  • I drop my iPod on the floor and now I only can use the home and power button and the screen won't work

    I Drop my iPod on the floor and now the screen won't work but it looks perfect but when I touch it it doesn't do anything and the home and the power button work so can someone help

    Try the remaining items of:
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • I had a iphone 3gs on contract then upgraded to 4s then i allowed the sync between the 2 phones then deleted contacts off both phones tried a backup from iclud and now the phones are exactly the same and my main 4s wont work

    i had a iphone 3gs on contract which ended so i upgraded to 4s. had the 3gs cleaned as a second phone for my partner. i then allowed the sync between the 2 so whatever was on mine would be on the other and vise versa. this meant the contacts was aswell so i deleted them not knowing they would be removed from both, i then tried a backup to icloud to restore the lost canotacts instead it seemed to clone my new 4s from my old 3gs and now the features on the 4s wont work. music and tunes have been lost along with all my messages
    please help me

    Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
    Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
    Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off.

Maybe you are looking for

  • Certificate Problem - Secure Connections Denied

    A friend just got her computer back from a loan and now finds that she can't gain access to any secure sites such as webmail. When she tries, she is greeted with the error message IDENTIFY CERTIFICATE IS NOT YET VALID UNABLE TO ESTABLISH A SECURE CON

  • MultiCube Queries - Inventory

    I have built a multicube which includes the daily load inventory cube and a snapshot inventory cube.  The idea for this is that I am building a workbook which will include the daily stock overview query and a monthly stock overview query. In order to

  • My imac has been experiencing power shutdowns.

    I have paid for a power supply and logic board but still experiencing shut downs. Apple is now stating it might be a software issue. If this is a software issue can I ask for my money back for the power supply and logic board?

  • JSTL HTML output when looping

    Hi, I am creating tables dynamically using JSTL. My problem is, the HTML that comes out has lots of blank space. This may sound insignificant but it makes it very hard to see what's going on when I view the source of a page. JSP:      <c:forEach item

  • Adobe Interactive Forms and Digital Signature

    Adobe Interactive Forms and Digital Signature Hi, I've a question if it works to digital sign interactive PDF documents created by an SAP BPM System? So is it possible just to sign the content, and not the interactive components like layout and butto