Updated to iOS 8 and can't connect to projector
I just updated my ipad to iOS 8.2 and can no longer connect to a projector. I am getting this error message. But the settings page indicates my OS updated successfully. How do I resolve this?
I can understand if you only read the friendly URL, you can imagine you have to jailbreak your device, but if you spend 1 minute reading the article, you'll see the steps to downgrade to 8.1.3.
Head over to this page and download iOS 8.1.3 IPSW for your iOS device. Ensure that you download the correct IPSW firmware according to the model number of your device. Installing the incorrect firmware could damage the iOS device. The download size of these files ranges from 1.5GB to 2GB. Therefore, downloading the firmware will take some time
Once you have the correct iOS firmware version downloaded, plug your iOS device to the computer using USB cable
Launch iTunes
Navigate to the device's summary page and hold the Option/Alt on the keyboard. Or, Shift if you are using Windows
While holding the key combination mentioned above, click Restore in iTunes
Browse to the location where you have saved the IPSW file and open it. Now iTunes will begin restoring your iPhone/iPad and install iOS 8.1.3
I did it and it works fine again !!
Similar Messages
-
Updated to iOS 6 and can't access websites or word documents.
I updated to iOS 6 and now having issues accessing my eCollege website.
I am also having issues opening up word documents.
Anyone else having these issues?Wifi settings-network settings-proxy to auto. Issue fixed.
-
HT201320 I just update to iOS 7 and can't get separate email accounts
I just updated to iOS 7 on my iPhone and can no longer see my three separate email accounts. The only thing that comes up is All Mail which merges my three accounts. Anybody else having this problem?
I've had a simialr problem - but no love with the reset. I have also stopped itunes from syncing and then re-synced the accounts with no success - they all seem to be gone.
When I open the mail app it prompts me to add accounts but as I try to add them it says they are already there and indeed I can see them in settings but there seems to have been a disconnect somewhere when updating to ios7. -
Updated to IOS 7 and can't restore data
I recently updated my IPhone 4 to ios 7 and it did the automatic backup it does right before updating. When it tried to restore, it have the error -1. I kept retrying and it still gave me the same issue every time I retried. I exited out and tried to do it again but I couldn't find the backup anymore. Does anyone know what's going on?
Try a different USB Cable... but if the Error persists you may have a Hardware issue.
Take your Phone in to Apple and have it checked. -
Update has killed phone and can't connect to restore
I have just run the latest update to v4.5.0.174 but the install failed and now the phone only displays an icon that looks like a dialog box with a circle, square and triangle in it, behind a circle with a line through it.
I now can't get Desktop Manager to connect to the phone so I can't try to reinstall or even downgrade.
How do I get my phone back?
Thanks
StuartStuart, Greetings, and welcome to the BlackBerry.com Support Forums.
disconnect the BlackBerry from the USB and reboo the PC from off
try it all again now, see if the DM will recognize the BlackBerry.
if not, You will need to use JL_Cmder to wipe the device and subsequently load the OS to the device. Follow the instructions here:
http://www.blackberryfaq.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
If JL_Cmder does not work, follow this instructional:
http://www.blackberryfaq.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
After updating to iOS 6, I can no longer connect to my schools wireless network. It uses manual http proxy. Now however a blank pop up comes up and it will not connect you. Thanks
Turn off your firewall and antivirus software.
-
I have an iPad 4th generation and when I updated to iOS 7 I can't use FaceTime. Every time I tried to sign in I get a message asking me to check my Network connection. FaceTime and iMessage are the only application that give me this message.
Try Reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings will be reset. -
I try to update my iphone 4 to ios 7.1.1. But now my iphone stucks in recovery mode and can't connect to itune. i use windows 7
Try the iTunes troubleshooting advice here:
Windows - http://support.apple.com/kb/ts1538 -
I update to iOS 7 and I can't connect to datashow
I update to iOS 7 and I can't connect to datashow
Double tap the home button and swipe upwards on the preview of the App (not the App Icon).
http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf -
Just updated to IOS 7 and two issues:
First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services". I'm not sure what this really means...
The second issue is when I try to select "Manually Manage Music"
The iPhone "My iPhone" is synced with another iTunes libary on "MY-PC". Do you want to erase this iPhone and sync with this iTunes library? An iPhone can be synced with only one iTunes library at a time. Erasing and syncing replaces the contents of this iPhone with the contents of this iTunes library."
So... I don't want to do that, but I do what to be able to Manage my music. I'm not sure what it means by being synced to another iTunes unless it means to an older version of itunes?
Anyone have any ideas?I cannot address the sync services error right now, but the error that you receive when you change from sync to manually manage music is what happens when you change. Once you change to manually manage music, it erases all of the music and will only put the music that you want on the phone, content that you manually drag over to it. See if this support document helps you out. http://support.apple.com/kb/HT1535
-
After I upgraded to IOS 8 my iPhone is not working well at all .. the most serious issue is the wifi which is too slow and can't connect to apple store and can't update my application .. also tried to search or update for ios 8 but also can't connect . safari also always can't connect to any the server . please check and advise
Hey ahmedfromtanta,
Thanks for the question. After reviewing your post, it sounds like trouble with Wi-Fi. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iOS: Troubleshooting Wi-Fi networks and connections
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
I have an Ipod touch version 4.2.1 and the instructions do not detail how to update to iOS 5. Can you help me with step by step instructions.
iOS 4.2.1 suggests that you may have 2nd generation Touch, which cannot be updated past iOS 4.2.1
Check http://support.apple.com/kb/HT1353 for help in identifying your model. A quicker method may be to check the back casing. If your iPod has Model No.A 1288 etched into it, then it's a 2nd gen Touch.
Assuming that you are using the latest version of iTunes (today, that is 10.6.3), to check if your iPod can be updated, connect it to your iTunes and look on the Device/Summary pane. Select Check for Updates. If there is one, you will see a message telling you that and how to install it. However, if you see a message saying that your iPod is up-to-date, then it cannot be updated. -
In the middle of downloading an update for garage band and lost the connection, now the app won't open or finish the download. Can I reinstall the app without losing my music?
The obvious way to resolve this on a computer would be to uninstall the app, then reinstall it, however on an iOS device that would cause all the data assoicated with the app to be thrown away.
Make sure your iTunes library has the latest updates for all your apps, then backup and restore the device. This should pull back a fresh copy of the app from your iTunes library and then give it the data from your device backup.
tt2 -
Since I updated my iPhone 4 to iOS 5 I can't connect to my mail exchange account.
Since I updated my iPhone 4 to iOS 5 I can't connect to my mail exchange account. I can connect through safari using all the same info. I have seen lots of info on this topic and I have tried it all. Nothing has worked so far. Any new ideas or info out there?
ok i changed my settings , but the is the icon suppose to say imessage , and under the SMS shouldnt it say delivered or read ??? and lol should the convo bubbles be in blue if its imssg ?
-
Changed my apple id but FaceTime didn't recognize this and when I updated to iOS 6 I can no longer get on to FaceTime. When I try, it says that the username or password is incorrect. Can anyone help
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
Cheers, Tom
Maybe you are looking for
-
Is there any way to have Mail automatically use our default "Sent" folder?
We are a small college, with a fair number of users who use Macs and iOS devices, and we run an IMAP mail server. By default, our accounts are configured with Sent, Trash, Drafts, and Junk folders. Apple's Mail.app insists on "Sent Messages" and "Del
-
Problem: Select Database to get X highest entries in reagrd to one field
Hi Forum, I have a problem regarding a complicated (at least for me) Select statement. It uses a customer Z-table to read certain data. But my goal is to read only a certain number of top entries per store. The number can change from one run to the o
-
How can I redirect iWeb Blog to Wordpress
Hi - I'm looking to redirect my iWeb blog to a temporary WordPress blog and was hoping there was some code I could use to do this? Or can I do this directly in iWeb? * Would I download the Index.html file to do this to add code? Then reupload to iDis
-
Resubmit and notification in case of error
Hi, In Oracle B2B if there is error while sending outbound or Inbound message, how can we resubmit the messages automatically. Also is there any way to send the notification in case of error while sending the messages. Thanks, Arun Jadhav
-
When downloading LR4.3 is it necessary to download program to drive C with limited space (SSD type) rather than to drive D with 3T storage or will this not work properly (using a PC with Windows 8)?