Updated to iTunes 10.1 and Now Computer Won't Recognize iPhone

I updated to iTunes 10.1 last night after I plugged in my phone and iTunes prompted me to. After doing so, I restarted my computer, plugged my phone back in, and now I get the message "USB Device Not Recognized" and my phone doesn't show up in iTunes. It does, however, charge while plugged in. The computer just doesnt' recognize it. I've followed the Apple page on what to do if there are driver issues. So I've uninstalled iTunes and all the other components, reinstalled, opened Device Manager and uninstalled and reinstalled the driver from there, have tried to update, but when I do, the C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\Drivers folder does not exist.
I am running Windows 7, and I have an iPhone 3Gs running iOS4.1.
Anyone have any suggestions on how to fix this? I'm out of ideas.
Message was edited by: vandenmor86

Well, I figured it out. My sync cable was the problem, apparently. I just used a different sync cable and it magically downloaded the driver with no problem and itunes popped right up. Figures, eh?

Similar Messages

  • I updated to Photoshop CC 2014 and now it won't recognize my Canon Scanner LiDE 210.

    I updated to Photoshop CC 2014 and now it won't recognize my Canon Scanner LiDE 210.
    Is there a fix for this? It worked with CS6 and CC just fine.

    Did you turn off the "show transform controls" option in the move tool?
    It sounds like you were using that previously.
    And you can always transform by using the Free Transform command (command/control T).

  • I have updated to itunes 10.5 and now it doesn't recognize our iphones and says we need a driver installer but then throws a notice saying an error occured. Anyone know anything about this?  :)

    I have updated to itunes 10.5 on my Mac computer and now it doesn't recognize my iphones and says i need to install a device driver but when i try to install it it throws up a notification saying an error occured and to contact the makers of my device 's suppot website.  Anyone know?

    Have you tried repairing your application from within the Control Panel?

  • I just updated my itunes (windows 8) and now it won't sync with my iphone.  It doesn't even recognize the iphone.

    iTunes on my Windows 8 computer updated on January 22, 2014.  Since that time it will not recognize or sync with my iPhone 4s.  I have removed and the downloaded my iTunes and the problem persists.
    Help!

    I followed the thread and used the link provided to download iTunes version 10.6.3 (again). The same error message keeps coming up, telling me that I do not have it installed. I tried restarting the computer following the install, but it still won´t acknowledge that 10.6.3 is installed. Any other solutions?

  • Just updated to iTunes 10.5 and now it won't mount iPad.

    Any idea why?
    Thanks in advance!

    I've got it working now. I followed Apple's instructions here http://support.apple.com/kb/HT1923 to completely remove all components of itunes in order. I rebooted after uninstalling and installing even though it doesn't prompt you but i don't know if this made any difference.
    When you first connect your device it takes a minute to reinstall the driver software and now it's working. I'm downloading iOS 5 right now.
    Good luck!
    P.S. After i upgraded originally i disconnected my device early and the driver install failed, i think this may have been my problem first time round despite trying to uninstall and install the driver after.

  • Iphone crashed lost music and now computer won't recognize it

    Hello everyone!
    So I was updating my iphone 5 (iOS 8 for sure, i think 8.1) and was adding some music when i thought i might not have enough space on my iphone. So on my iphone I deleted music and a few movies FROM the iphone, not in iTunes. My music app froze and then crashed. When i went back into the app all my music was gone except my 120 odd songs I actually purchased from iTunes. This has happened to me before and the fix was just to leave the iphone plugged into my computer and all the music would return in 20 odd minutes or so. Well after this crash my computer wouldnt recognize my iphone... some of my music came back but not even close to all (went from 5000 songs to right around 1200). Ive tried all the fixes ive read about. Restarting iphone and computer, re-installing itunes, tried a different cord, and a just about every fix possible using the device manager (i use windows 8.1). Something interesting about after it crashed was that the syncing arrows that spin around in a circle in the top left of the phone while syncing is taking place were spinning for like 12 hours after being unplugged from my computer... weird stuff. The only time I can even get my computer to recognize my iphone is even plugged in and is trying to connect is when I leave it plugged in and do a hard reset (holding down home and screen lock button) and then it recognizes it for like 10 seconds - says error code 43 and then will never reappear until I do another hard reset. I really dont know whats going on and as far as I can tell, im the first to have this type of problem, hopefully not but really appreciate any help you guys can give.

    Hello , Willy_D
    Welcome to the Apple Support Communities!
    I understand that you have an issue where your Windows computer is not longer recognizing your iPhone in iTunes. I also realize you have already completed a lot of great troubleshooting. I would first recommend, to ensure all steps have been completed, reading over the attached article and working through any steps that you have not yet completed. 
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    Please let me know if the issue continues so that we can continue troubleshooting. 
    Have a great day,
    Joe

  • Iphone 4 is stuck with itunes usb screen, and my computer won't recognize the device, Help!!

    My iphone 4 is stuck on the screen with the itunes symbol and usb. When I plug it into my computer it says that it cannot recognize the device and theres a malfunction. I've tried unplugging the port ffrom my phone, going into dfu mode and plugging it bavk in. the apple logo comes on for a minute but then goes right back to the itunes/usb screen. I'm at a lose for what do do..every forumn says dfu mode, but its not working. Any other suggestions? Thanks!

    Chris477 wrote:
    My iphone 4 is stuck on the screen with the itunes symbol and usb. ... I'm at a lose for what do .... Any other suggestions?
    Looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • I just downloaded an update to ITunes this morning, and now I am getting an error message saying iTunes can't start because MSVCR80.dll is missing from my computer. What the heck happened?

    I just downloaded the latest update for iTunes this morning, and now I am getting a message saying that iTunes can't start because MSVCR80.dll is missing from my computer.  What the heck happened?

    Troubleshooting issues with iTunes for Windows updates - MSVCR80

  • Updated to itunes 10.6.3 and now it won't recognize my iphone or ipad

    Itunes updated to 10.6.3 and now it will not recognize my iPhone or iPad.  I have tried uninstalling itunes and the amds following steps provided on the support site.  Still nothing.  My computer does show both as cameras though.  Any ideas?

    There has to be a fix without doing that.
    You're not using any sort of hub or extender are you? iTunes doesn't always like that.
    Tried different USB ports?
    what operating system do you have?

  • Hi I just upgraded software through iTunes then unplugged iPhone now it is stuck on the connect to intunes screen, it won't turn off and iTunes and my computer won't recognize my phone? Please help

    Hi I just upgraded software through iTunes then unplugged iPhone now it is stuck on the connect to intunes screen, it won't turn off and iTunes and my computer won't recognize my phone? Please help

    My phone is doing the same thing. My computer acknowledges that I have connected my iPhone 4, however, iTunes will no longer connect or sync to my iPhone 4. I have uninstalled iTunes, Bonjour and all Apple products from my pc. I have re-installed them back on. I have reset my phone. I have emptied my temp folder. I have done everything. If my iPhone cannot update and sync with iTunes then I may as well get another phone from somewhere else. I am disappointed that I cannot resolve this issue.
    Rebeccaspe31, were you able to resolve your issue? If so how?

  • Updated iTunes to 10.3.1 and now it won't recognize my iPod

    I recently updated my iTunes to the latest version, and  now it won't recognize any of my apple products. I have a first gen iPod touch, 4th gen. ipod nano and 5th gen. ipod nano. The ipod does work still, and is chargeable through a dock or a AC adapter. I've gone through all of the five Rs and reinstalled itunes, and nothing is working. My ipod won't show up in windows either. When I plug in my 5th gen nano, windows says the driver did not install sucessfully and itunes won't even acknowledge I've plugged it in. Any help would be fantastic, I'd really appreciate it. I put new music on my ipod all the time, and not being able to do so *****.

    Well yesterday I finally broke down and called apple service... I spent $29 and 1.5 hours on the phone, but the operator was finally able to fix my ipod. There was an issue with the itunes update, and it had corrupted. After uninstalling, installing, and updating several drivers, programs, and resolving other issues, my iPod finally works. Even better, the operator gave me a way to contact him again if I am having issues, free of charge. I would have much rather fixed this myself without spending the additional money, but I'll admit there was no way I could've done what he did, as there were certain orders to uninstalling Apple programs. My advice? Bite the bullet and call. They will get your iPad working again. (:

  • I updated to iTunes 10.7 and now iTunes does not see my iPod Touch.  It says the Apple Mobile Device USB Driver cannot be installed.

    I updated to iTunes 10.7 and now iTunes does not see my iPod touch.  After the update I got a message that the Apple Mobile Device USB Driver could not be installed.  I have uninstalled and reinstalled iTunes 3 times, but still cannot fix the problem.  I have followed the suggested fixes in Apple Support.   Any suggestions?  Thanks!

    Try the actions here for that driver.
    iOS: Device not recognized in iTunes for Windows
    I would first do this:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • Just updated itunes 10.5 and now it won't open at all please help me

    Just updated itunes 10.5 and now it won't open at all please help me

    Already a thread about this problem. Check to see if any of the given solutons here work for you.
    https://discussions.apple.com/thread/3381033?start=0&tstart=0

  • Updated itunes and now it won't recognize my i4s

    I updated my itunes to the newest version and now it won't recognize my ipods or my new 4s phone. What the heck??? HELP ME!!!

    Windows or mac?

  • I updated my itunes this morning, and now I keep getting an error message when trying to burn a disc. Any ideas how to resolve this?

    I updated my itunes this morning, and now I keep getting an error message when trying to burn a disc. Any ideas how to resolve this?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

Maybe you are looking for

  • HT1423 iMac Memory does not work?

    iMac (Mid 2007)  Removed the original IGB Ram replaced with 2 new PNY DDR2 PC2-5300 667MHz Memory.  iMac runs but screen is blank and no start up sound of any kind.  Held down the start button, machine stopped.  Removed new ram, installed old 1GB ram

  • JDev 11.1.2.4.0 Can't Open Unbounded Task Flow

    I just created a new Fusion application. When I click on the unbounded task flow adfc-config.xml I get an error dialog box An unexpected severe error has occured in JDeveloper. It seems that same issue as in that discussion https://forums.oracle.com/

  • 9300 file type associations?

    Hi I have files with a wmlc extention that open up in the browser using file - open from the browser menu but they won't automatically launch when selected. Anyone know of how to associate a file type with an application on the 9300? Thanks Barry

  • TV Screen Effect

    I want to do an effect, whether I do it directly in Keynote or wherever. I want to insert a picture of an LCD panel and play video on the "screen". So for example, I can take a stock picture of an LCD panel off the Internet. Then I create a shape tha

  • Can't export as Html (Waiting for all files to be ready...)

    Made a bunch of updates last night to a client site.  Everything looks great except I can't export as Html. Had my sister try to export on her computer and we both get to 87%, then it permanently stalls, saying "Waiting for all files to be ready" (Se