Updated to Itunes 7.0.1, doesn't see my ipod via USB1.1!!

Hi
My itunes/ipod were running fine under USB 1.1 (older computer) until I updated to 7.0.1 - now itunes doesn't see my ipod!! The iPod shows up in device manager, though, and my machine even mapped a drive to it when iTunes timed out (I removed that).
Everything was fine until I updated. sigh.
I found an Apple page that said they don't "support' USB 1.1 - could it be that iTunes 7.0.1 just doesn't?
thanks in advance for any help!
Brian

yup same here
its a crapshoot, sometimes it happens other times it does not
only way round this i found is to do this:
reboot windows
and reboot iphone
eventually they will see each other.
what causes it? poorly coded itunes for windows, who knows.
but its something i've had for many versions now, 9.2.1 is nothing new. but it does seem to happen more now.

Similar Messages

I updated my itunes and now it doesn't recognize my ipod touch

Ever since I updated my itunes to the latest version, it doesn't recognize my ipod therefore I can't sync new songs onto it.
I tried following these apple help steps http://support.apple.com/kb/TS1363?viewlocale=en_US but am stuck on #4-11...for some reason I can't delete the Temp folder because it's saying I still have a program open but I'm sure I've closed everything!

You want this article. The article you cited is for regular iPod, not iPS Devices (iPod touch, iPhone and iPad)
iOS: Device not recognized in iTunes for Windows

ITunes 7.3.1 doesn't see my iPod Shuffle

I installed iTunes 7.3.1 and the Quicktime update at the same time. I restarted my computer, then opened iTunes. Everything works well, music plays, nothing missing yet, but:
When I plug in my iPod Shuffle using the Apple-provided USB dock, iTunes does nothing. Doesn't recognize it or show it in the menu. Finder doesn't recognize it either.
When I plug the Shuffle in, its LED glows orange for a couple seconds, then goes out.
The Shuffle behaves normally when unplugged from the dock.
The Shuffle worked fine with iTunes in version 7.3.

I had this problem. For me, the problem got away by closing iTunes, unmounting the iPod from the desktop and then attaching the iPod again. Wait iTunes to launch automatically. Once I did this, the iPod is also recognized again when iTunes was already running when I attach the device.
Hope this helps.
Ringo
Message was edited by: Ringo De Smet

ITunes doesn't see my iPod video 30 gb! Please help me!

When i connect by usb 2.0 my iPod, the pc see the iPod as an external drive and It seems to be empty, while iTunes says that there isn't any iPod connected. The latest iPod software is installed. Opening the iPod while it isn't connected to the pc, there isn't any file but in the settings is written that almost 10 gb are full and 20 gb are free: this should be ok because before that these problems appeared that was the memory used. Of course I can't update the iPod or reset it to default because the iPod updater doesn't see any iPod connected to the pc while it is really connected... Well, windows sees my iPod while iTunes doesn't see it so i can't make any operation on the iPod and when it isn't connected to the pc i can't listen to the music... Please sombody help me!

Hello bulgi81,
See if any of the troubleshooting steps in this article help: iPod shows up in Windows but not in iTunes

ITunes 7 doesn't see my iPod but it is in My Compueter!

Diagnostics that I ran:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
System manufacturer System Product Name
iTunes 7.0.0.70
iPodService 7.0.0.70 is currently running.
iTunesHelper 7.0.0.70 is currently running.
Current user is an administrator.
Connected Storage Devices:
IDE\DiskST3300831AS____________________________3.02___, Bus Type ATA, Bus Address [2,0]
IDE\DiskWDCWD740ADFD-00NLR1___________________20.07P20, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskApple__iPod___________1.62, Bus Type USB
Universal Serial Bus Controllers:
Standard OpenHCD USB Host Controller, PCI bus 0, device 2, function 0. Device is working properly.
Standard Enhanced PCI to USB Host Controller, PCI bus 0, device 2, function 1. Device is working properly.
No IEEE 1394 Host Controller found.
The last connected iPod serial number: XXXXXXXXXXXXX
I've reinstalled iTunes 7, restarted all the services and had no detection yet.
I re-installed iTunes 6.0.5 and it worked w/out a hitch.
Does this have something to do with my pc not having any firewire ports on it? Or is there a work around ?

Ok, I have been able to fool iTunes and my iPod to at least get it up to firmware version 1.2 BUT still doesn't see my iPod until I kill the iPod service then start iTunes. And this gets better, after it sees it my iPod drops and acts like it's disconnected yet my computer still sees it as connected!
I too don't want to go back to iTunes 6 but it may have to come down to this.
To regain your Library all you have to do is get ride of the xml config files and config folders, just leave your music folder and re-import your music files in 6 and you'll be set.

Cannot upgrade my iPod Touch 3rd gen from 4.2.1 to 4.3.2. I click the button "check for updates" on iTunes and it says "This version of the iPod software (4.2.1) is the current version."

Cannot upgrade my iPod Touch 3rd gen from 4.2.1 to 4.3.2. I click the button "check for updates" on iTunes and it says "This version of the iPod software (4.2.1) is the current version."

1.Go to http://www.felixbruns.de/iPod/firmware/
2.Download the iPod Touch 3G 4.3.2 Firmware to your desktop.
3.Go to your iPod summary, then hold shift.
4.Keep holding shift and click Restore.
5.Go to desktop on the window that comes up and click the software.

My PC doesn't see my iPad via iTunes, and I'm getting a message "iPad is disabled / connect to iTunes". How do I get a login screen on the iPad?

My PC doesn't see my iPad via iTunes, and I'm getting a message "iPad is disabled / connect to iTunes". How do I get a login screen on the iPad?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again.

I have just updated to itunes 11 and when I plugged in my ipod classic it locked up. When I tried again it said my ipod was corrupt and advised I reset it. I reluctantly did this as I lost all my music and now itunes just locks up when I plug in my ipod.

I have just updated to itunes 11 and when I plugged in my ipod classic it locked up. When I tried again it said my ipod was corrupt and advised I reset it. I reluctantly did this as I lost all my music and now itunes just locks up when I plug in my ipod.

Not if you first do a sync and have iTunes make a backup. However, if your only copy of the iTunes data is in the Touch, then you need to first copy the data to a new iTunes Library using third-party software such as Phone To Mac.

Windows doesn't see my iPod

I had my ipod connected and it worked just fine, I had to force my computer to turn off, hold down the power button, and now my computer doesn't see my iPod. I tried the data mode and the resetting and the restarting the computer. I can't restore the ipod, because I can't get the computer to see it. The ipod alone works wonderfully and it is charging. So it sees that it is connected to the computer, but the computer doesn't see it. Any ideas?

I cannot download my new music because my ipod is not recognized. My usb port is working, I downloaded the new ipod version for nano and it is still not working. It does recharge when plugged in so why wont it recognize my ipod when plugged in ? Any help most appreciated.
laptop Windows XP

If I have my music in itunes on my mac will it transfer to ipod via icloud or only new music i purchase?

if I have my music in itunes on my mac will it transfer to ipod via icloud or only new music i purchase?

Welcome to the Apple Community.
iTunes in the cloud will let you redownload any purchase you have made (not just new purchased) to your iPod.
iTunes match will let you download anything from your library.

ITunes 9.2.1 doesn't see my iPhone 3G 4.0 on Windows 7 x64

Hi everyone. I'm running Windows 7 x64 and have been having this problem since I updated my iTunes to 9.2. The problem is I plug my phone in, and iTunes doesn't see it. After plugging it in, iTunes seems to struggle a bit, lags, before finally running smoothly again. The phone doesn't appear in iTunes, though my computer detects it and I can browse the photos like I always could. Any help is appreciated!

yup same here
its a crapshoot, sometimes it happens other times it does not
only way round this i found is to do this:
reboot windows
and reboot iphone
eventually they will see each other.
what causes it? poorly coded itunes for windows, who knows.
but its something i've had for many versions now, 9.2.1 is nothing new. but it does seem to happen more now.

After updating to iTunes 7.1, I can no longer sync iPod from iPhoto

After updating iTunes to 7.1, my iPod started crashing. I used Restore to resync music, but Restore or any subsequent sync in iTunes will not sync any photos from iPhoto 5.0.4.
The error message I receive is:
"The iPod "My iPod" cannot be synced. The required file cannot be found."
iPhoto appears to work correctly, but no longer syncs. Any advice to get iPhoto working with iTunes would be welcome.
iBook G4 1Ghz/iMac G5 iSight Mac OS X (10.4.8) iPod Photo 40GB

When iTunes attempts to sync photos from iPhoto, it shows the amount of the iPod drive taken up with photos, BUT NO usage on the drive graph itself.
When Sync Photos from iPhoto is deselected and another sync attempted, iTunes asks if photos should be removed from iPod, despite the previous sync being unsuccessful. When I choose to remove the photos, the amount shown taken up by photos disappears.
Does anyone know what the error message quoted in my question above means?
iBook G4 1Ghz/iMac G5 iSight Mac OS X (10.4.3) iPod Photo 40GB

I updated my iTunes to 10.5. I see my library but it doesnt react to any commands now

Hey there,
I updated my iTunes to 10.5 which was a big mistake.
iTunes opens normally but it does not react to any commands. I cannot click on any song or field in the menue.
I use a Lenovo 64 bit machine with Windows 7. I also use iCloud.
I tried to repare iTunes several times but it does not help. I also wonder why there is a *32 next to iTunes in my Task Manager although I installed the 64 bit version.
Thank you so much for your help,
Chris

But the iTunes was working fine until some days ago! and then just crash... yesterday it was working well... today it's not working again...
iPhone, iPod for synchronize... and nothing work...

ITunes doesn't "see" my iPod Touch but Windows 7 does. What can I do?

Windows 7 using "MTP USB Device" driver so it recognizes that it's an Apple iPod but iTunes doesn't see it. I have spent the entire day following the "install/ininstall/start AMDS/stop AMDS" instructions ad nauseum...still no love. Frustration maxed out!

Did you try here:
iOS: Device not recognized in iTunes for Windows
Did you do this:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Itunes messed up my restore and now doesn't see my ipod. What should I do?

I performed a restore on my Ipod Touch (bought new a couple of years back) and itunes tells me there was an error and the restore could not be completed. Nice that it still manage to delete all my information, contacts and goodness knows what else (I chose to backup my files using the itunes function), btw.
Anyways, now my ipod just has the "connect to itunes" picture. My PC doesn't recognise my ipod, apart from Apple Mobile Device under USB controllers in the Device Manager, and itunes doesn't see or try to do anything with my pod so that I can use it.
I've tried this solution http://support.apple.com/kb/TS1538 but that didn't help and I reinstalled itunes and Apple Mobile Device Support, but to no avail.
What should I do? I'm using Windows 7 HP x64.

Put it in DFU mode.
It's a common thing among jailbreakers. No one else really needs it, but it should allow your iPod to take the official firmware of your choice.
Here is a copy from a jailbreak help guide I will not link.
Please note that this will not jailbreak your device, so back off, moderators.
Method (1)
* Attach the phone to the pc
* Turn the phone off
* Hold power and home together for *exactly* 10 seconds
* Release power but keep holding home until the pc beeps as a USB device is recognized.
* At no point will the display come on. Now your restore should work.

Updated to Itunes 7.0.1, doesn't see my ipod via USB1.1!!

Similar Messages

Maybe you are looking for