Updated to Maverick on IMac & lots of notes on iPhone lost...?

between IMac/IPhone & Ipad its been a bloody pain keeping things working properly...
Just updated IMac to Mav & checked my iphone notes (which I rely on) and saw half were gone...! Checked the notes (that was an endeavor finding them) on the Imac and they are all there...
I synced the phone w/ comp hoping that would help - NO.... I am not really computer saavy & can't believe how complicated this is becoming...can someone give me a simple route to keeping my notes from disappearing...??? Actually happened before & can't recall how I retrieved them....
thanks,
S

thank you for being specific..! ICloud>notes is turned on IMac
On my own, while crazy frustrated, I did turn (it wasn't) Icloud>notes on in IPhone - and it seemed to find a few more notes somewhere 'out there' in cyberspace....!
So weird - but not all are on IPhone and too many (some I recognized as having deleted) on the IMac notes...???
How odd is this....? Should I copy (manually) what I want back to IPhone/delete what I want on IMac & cross my fingers this doesn't happen again....? Or is there a bigger issue to fix so this DOESN'T happen again......
Waaaah - I just wish I understood the basics more, but I don't have the time & patience to figure it all out.! So thank you for attempting to help me....!

Similar Messages

With HP update for Maverick my photosmart C309A does not work properly

After the HP-update for Maverick my printer HP Photosmart C309A does not work correctly. The scan facility is gone and the printer "hangs" after one print. I had to reset the printer software from a backup and to disable the automatic installation facility on my IMac. Shortly, very very very nasty. I hope this is the way for Apple to change this update into a good one. There is no other way to communicate with Apple then through the Community. I wander if Yosemite gives the same problems with printers.

You are welcome.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Some people have solved this by restoring their previous driver from their backup.

HT5361 Mail update for Mavericks 1.0 is repeatedly not installing.

I have tried to install the latest Mail update for Mavericks. The update will not install for me. It appears to install, but never does. Any solution?

How do you know it isn't installing? For reasons known only to Apple, the version of Mail doesn't change to 7.1 as an update normally does.

Since updating to Maverick, my imac has become extremely slow. I have ran an EtreCheck and posted it below. Any help will be greatly appreciated. Thank you! Hardware Information:      iMac (24-inch, Early 2008)      iMac - model: iMac8,1      1 2.8 GH

Hardware Information:
          iMac (24-inch, Early 2008)
          iMac - model: iMac8,1
          1 2.8 GHz Intel Core 2 Duo CPU: 2 cores
          2 GB RAM
Video Information:
          ATI Radeon HD 2600 Pro - VRAM: 256 MB
System Software:
          OS X 10.9.1 (13B42) - Uptime: 5 days 20:20:57
Disk Information:
          Hitachi HDP725032GLA380 disk0 : (320.07 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 319.21 GB (96.82 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
          Apple Inc. Built-in iSight
          Apple, Inc. Keyboard Hub
                    Apple, Inc Apple Keyboard
          HP Officejet J6400 series
          Nike FuelBand
          Apple Computer, Inc. IR Receiver
          Apple Inc. BRCM2046 Hub
                    Apple Inc. Bluetooth USB Host Controller
FireWire Information:
          G-TECH OEM ATA Device 00 800mbit - 800mbit max
                    EFI (disk1s1) <not mounted>: 209.7 MB
                    G-DRIVE (disk1s2) /Volumes/G-DRIVE: 499.76 GB (96.69 GB free)
Thunderbolt Information:
Startup Items:
          CiscoTUN: Path: /System/Library/StartupItems/CiscoTUN
          HP IO: Path: /Library/StartupItems/HP IO
Launch Daemons:
          [System] com.adobe.fpsaud.plist 3rd-Party support link
          [System] com.adobe.versioncueCS4.plist 3rd-Party support link
          [System] com.cisco.anyconnect.vpnagentd.plist 3rd-Party support link
          [System] com.google.keystone.daemon.plist 3rd-Party support link
          [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
Launch Agents:
          [System] com.adobe.CS4ServiceManager.plist 3rd-Party support link
          [System] com.cisco.anyconnect.gui.plist 3rd-Party support link
          [System] com.google.keystone.agent.plist 3rd-Party support link
          [System] com.hp.help.tocgenerator.plist 3rd-Party support link
          [System] com.nike.nikeplusconnect.plist 3rd-Party support link
User Launch Agents:
          [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
          [not loaded] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
User Login Items:
          iTunesHelper
          HP Registration Assistant
          HP Scheduler
          HP Product Research
          HPEventHandler
Internet Plug-ins:
          Flip4Mac WMV Plugin: Version: 2.2.3.7 3rd-Party support link
          FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
          iPhotoPhotocast: Version: 7.0
          Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
          AdobePDFViewer: Version: 9.5.5 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
          QuickTime Plugin: Version: 7.7.3
          SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
          Silverlight: Version: 5.1.10411.0 - SDK 10.6 3rd-Party support link
          JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Outdated! Update
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
          Adobe Version Cue CS4 3rd-Party support link
          Flash Player 3rd-Party support link
          Flip4Mac WMV 3rd-Party support link
Old Applications:
          /Library/Application Support/Microsoft/MERP2.0
                    Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4 3rd-Party support link
                    Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4 3rd-Party support link
          Solver:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
          SLLauncher:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
          /Applications/Microsoft Office 2011/Office
                    Open XML for Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Office Setup Assistant:          Version: 14.3.6 - SDK 10.5 3rd-Party support link
                    Microsoft Alerts Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    SyncServicesAgent:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Database Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Graph:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Database Utility:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Office Reminders:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Upload Center:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    My Day:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Chart Converter:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Clip Gallery:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
          /Applications/Microsoft Office 2011
                    Microsoft PowerPoint:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Outlook:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Word:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Document Connection:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
          Microsoft Language Register:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
          Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4 3rd-Party support link
                    /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Time Machine:
          Skip System Files: NO
          Auto backup: YES
          Volumes being backed up:
                    Macintosh HD: Disk size: 297.29 GB Disk used: 207.12 GB
          Destinations:
                    G-DRIVE Q [Local] (Last used)
                    Total size: 465.44 GB
                    Total number of backups: 177
                    Oldest backup: 2009-01-25 04:24:35 +0000
                    Last backup: 2014-03-17 21:35:38 +0000
                    Size of backup disk: Too small
                              Backup size 465.44 GB < (Disk used 207.12 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
               9%          Microsoft Word
               3%          Adobe Illustrator
               2%          Nike+ Connect
               2%          WindowServer
               1%          EtreCheck
Top Processes by Memory:
          274 MB          Adobe Illustrator
          115 MB          Mail
          76 MB          Google Chrome
          72 MB          WindowServer
          45 MB          com.apple.WebKit.WebContent
Virtual Memory Information:
          52 MB          Free RAM
          666 MB          Active RAM
          611 MB          Inactive RAM
          322 MB          Wired RAM
          7.11 GB          Page-ins
          161 MB          Page-outs

You are only running on 2GB of RAM. IMHO 4GB woud be the minimum to realistically run Mavericks on, although the more the better.
Pete

After i updated to mavericks my iMac is sooooo slow

i have a 27" imac mid 2010 2.8GHz i5, about a week or two after i updated to 10.9 i experienced slowdown for the first time ever. Animations are slow, moving the cusor is slow. i checked the activity monitor i have 4GB ram and 3.86GB is in use all the time, virtual memory is at 4.31GB. When i had mountain lion installed the memory used was always around 1.3GB. Is there something i can do to clear the memory used so my imac won't slow down?

Mavericks is designed to use RAM differently, so you will need to ignore the fact that it is all used some of the time. The main figure to worry about is paging to disk, shown as 'Swap used' in Activity Monitor.
An Etrecheck report may help, also if you can manage to find a reproducible fault then you can try that in safe mode (hold shift after the chime until the spinning 'cog' appears). Ensure the login window says 'safe mode'.
https://support.apple.com/kb/HT1455
It will disable all third party extensions & startup items.
If the Mac is better in safe mode it is time to get a system report and look at the third party items. Be aware that some features will be disabled like wifi on some models, graphics drivers will be in a reduced mode - this is normal in safe mode. Reboot to go back to normal.

Just installed Mavericks on iMac and Messages not working properly

I just upgraded my iMac to OS X 10.9. Most everything is okay but Messages is acting weird. All the messages from one person, who has an iPhone and Messages now show up in green bubbles, which signifies SMS. Before the upgrade, they all showed correctly. They appear correctly on my new iPad which I just set up yesterday, on my iPhone (both running iOS 7) and on my MacBook Air which is still running OS X 10.8. I tried it with other people and some have the regular light grey bubble and one has a purple bubble. This is only happing on the just upgraded OS X 10.0 Now I saw this on MacRumors and it is obvious this happens to others. This is the supposed cause..
"In iMessage settings there are options to change the colors. With Mavericks they let you choose your own color that you want people to see, but it randomly picks one for you from the start, until you change it. Click on the "viewing" tab in preferences and you can change the sender's color back to clear, or whatever you want it to be."
I checked and my iMac is set to Automatic. Is this what others are seeing?

Zap the PRAM and Reset the SMC, then try again.

4.2.1 update downloaded to my imac,but has put my iphone in recovery mode!!

Hi,as the title suggests yesterday I downloaded update 4.2 to my imac and when it finished downloading I got the message,"itunes detects an iphone in recovery mode.You must restore the iphone to be compatible with itunes." So I clicked on the restore icon and after a couple of minutes I get the same message about being in recovery mode.
I've been on the support site but nothing,checked out a couple other sites aswell,downloaded Recboot,iRecovery,tried on another computer to restore,but nothing is happening.
Love my apple products,but so p#####d off that when something goes wrong it's a nightmare.
Please can anyone give any advice that I haven't already tried.
Cheers

What happens when you try to restore, does it give you an error?
I had a similar problem. Went to update from 4.1 to 4.2(.1) and every time it failed and left my iPhone stuck in recovery mode. Usually it failed with the error 1013 or 1004 - which according to Apple are hardware issues. THEY ARE NOT.
There is a simple fix for this: If you are on a windows PC:
goto:
C:\windows\system32\drivers\ect\
and if there is a file called: hosts.umbrella (or something very similar) then delete it.
There should also be a file called: hosts (or something very similar) - Open that with your favorite text editor and remove any line which has: apple.com
Then save the file, restart your PC and begin the update again, all should work fine.

HT1766 how do i update calendar on my imac from calendar on my iphone?

my calendar on the imac needs updating to calendar on my iphone, how?

Firefox Link to download.
The only way you can upgrade Safari is to upgrade your operating system. The current version of Safari is 8.0.4 which requires Yosemite. If you want to consider upgrading, check that your computer is compatible with Mountain Lion/Mavericks/Yosemite.
To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
iMac (Mid 2007 or newer) model number 7,1 or higher
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
8 GB or more of available space
Check to make sure your applications are compatible. PowerPC applications are no longer supported after 10.6.
Application Compatibility
Applications Compatibility (2)
Do a backup before installing.
One option is to create a new partition (~30- 50 GB), install the new OS, and ‘test drive’ it. If you like/don’t like it it, you can then remove the partition. Do a backup before you do anything. By doing this, if you don’t like it you won’t have to go though the revert process.

I updated my iPad to 5.0 but not my iPhone 4 so how can u send iMessages to other people?

So how can u send iMessages to people if my iPad is already updated which I really only wanted to update my iPad since I don't want to really mess up my iPhone 4? Or can u still send iMessages from the iPad to my iPhone possibly?

iPhone User Guide (For iOS 5.0 Software)
iPad User Guide (For iOS 5.0 Software)
iOS: About Messages

When I try to migrate from imac to macbook pro my user account says this user needs attention before migrating. My e-mail does not migrate in the process. this never happened before i updated to Maverick

When I try to migrate from imac to macbook pro my user account says "this user needs attention before migrating". My e-mail does not migrate in the process. This never happened before I updated to Maverick. I have repaired user permissions but this not make any difference

Just a Follow-up - the migration went fine. The migration did not import Little Snitch, Flip4Mac and DivX, stating they were incompatible. It also reported that Intego Back up Assistant has improper security setting (which I have not yet investigated).
I am encountering small problems. Safari would not open embedded pdf documents and instead showed a black screen. This was fixed with instructions found at http://helpx.adobe.com/acrobat/using/display-pdf-browser-acrobat-xi.html and it now works fine.
Importing 17 years of old mail from Eudora to Apple Mail was time consuming. mostly because of the pre-migration preening i did, but using Eudora file cleaner before the migrtaion helped a lot.
I amy find some more glitches, but so far everything seems to be working.

I can not open Airport utility on my iMac after updating to maverick 10.90.4

I can not open Airport utility on my iMac after updating to maverick 10.9.4 . Error Message:[You can’t use this version of the application “AirPort Utility.app” with this version of OS X. You have "Airport Utility.app"5.4.2] It also will not allow me to install "airport Utility 6.3. Does anybody has a fix for this?

Re-run Software Update and see if there is a newer version of Airport Utility. I suspect your router or iMac may be too old to use Airport Utility 6.3 . As a work- around if Software Update does not work then try reading this article and see if the suggested solution help you.
http://coreyjmahler.com/2013/10/24/airport-utility-5-6-1-on-os-x-10-9-mavericks/

My iMac cannot sync notes with my iPad or iPhone since the Mavericks update.

My iMac cannot sync notes with my iPad or iPhone since the Mavericks update. I get the error message "This Mac can't connect to iCloud because of a problem with my [email protected] Open iCloud preferences to fix this problem." Help. I have version 10.9.3 on the iMac, 7.1.1 on iPhone and iPad. The iPhone & iPad sync notes fine. But neither gets the changes I put in the iMac.
I automatically have an email @iCloud.com when that update occured. Can anyone help me?

1. Turn the router, iPad and printer off.
2. Turn on the router and then wait 30 seconds to let it complete its start-up process.
3. Turn on printer and then wait 30 seconds to let it complete its start-up process.
4. Turn on your iPad and test print.

Just updated to Maverick on my IMac and have all kind of problems with Iphoto and Mailbox

I recently updated my IMac to Maverick and was not aware of all the problems that came with this update. In Iphoto a lot of pictures disappeared and other are turned upside down other were wrong format. In the mailbox I tried to sort by name of sender to find out that names of sender are not matching the mail. One name that I have had on e conversation with was related to 10 mails with NO connection to him. Have made all the updates to latest version Iphoto promelem remains.

Re iphoto, back up first then rebuild the library as follows.
http://support.apple.com/kb/ht2638
If you still have problems post in iphoto forum
There is also a rebuild mailbox option in Mavericks Mail.

I have iMac version 10.7.5 can i update to Mavericks 10.9.2 ?

I have iMac version 10.7.5 can i update to Mavericks 10.9.2 ?

Your MBP qualifies for the upgrade to OS X Mavericks.
It would be very prudent and highly advisable that you create a viable backup of your entire system and all your important data before embarking on a major systems upgrade.
Backup your entire system using an externally connected hard drive using a data cloning app such as Carbon Copy Cloner or SuperDuper to create an identical and bootable copy (clone) of your entire Mac's system to an external hard drive.
This needs to be done in the event something unforeseen goes bad with the install or you simply do not like the new OS.
Failure to backup means a much more tedious, longer and arduous task and process to restore your Mac to its previous system and health if you decide there are too many issues that may or may not occur during the install or during general operation.
Good Luck!

After the latest updat to Mavericks 10.9.3, my imac continues to loop back to the login screen...Suggestions??? THANK YOU VERY MUCH!

After the latest updat to Mavericks 10.9.3, my imac continues to loop back to the login screen...Suggestions??? THANK YOU VERY MUCH!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[45]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}')printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ s/ *:$//;x;s/\n//;/Apple|Capacity:|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;};/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;} ' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/:/;END { if(NR<100)print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}')print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR==2'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' ' s/^.{52}//;s/ .+//p ' ' /Launch[AD].+\.plist$/;END{if(NR<100)print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/;END{if(NR<100)print "/System/"};' '/^\/usr\/lib\/.+dylib$/p' '/\/etc\/(auto_m|hosts[^.]|peri)/s/^\.\/[^/]+//p' ' /\/(Contents\/.+\/Contents|Frameworks)\//d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' /lR/ { if($2<='${p[25]}')print $2;} ' ' BEGIN { FS=":";} $3~/(sh|ng|ic)$/ { n=split($3,a,".");sub(/_2[01].+/,"",$3);b=b"\n"$2" "$3" "a[n]" "$1;c=c$1;} END { d="sort|tail -n'${p[38]}'";print b|d;close(d);if(c)print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(A.+ E.+ text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' /:/{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status "-F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL'" '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/*/*.{BS,Bas,Es,OSXU,Rem}*.bom' '{/,}L*/Lo*/Diag* -type f \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;' '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto_master,{cron,fs}tab,hosts,{launchd,sysctl}.conf} /usr/local/etc/periodic/*/* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP RSSI Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear;};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ test "$v"&&echo "$_";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;A0;{ A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D22 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D23 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;D22 32 31 43 38;D23 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Updated to Maverick on IMac & lots of notes on iPhone lost...?

Similar Messages

Maybe you are looking for